The post Datalab Marker v2 vs MinerU, Docling, and Liteparse: Benchmark Breakdown appeared first on MarkTechPost.

The post Phantom Stealer Campaign Uses JavaScript and PowerShell to Steal Browser Credentials appeared first on GBHackers Security | #1 Globally Trusted Cyber Security News Platform.

The post Phantom Stealer Campaign Uses JavaScript and PowerShell to Steal Browser Credentials appeared first on GBHackers Security | #1 Globally Trusted Cyber Security News Platform.

Executive summary 

A group of Russian state-supported cyber actors has been targeting and compromising various Western government and commercial organizations using the Zimbra Collaboration Suite (ZCS) software since at least July 2025. The Russian state-supported advanced persistent threat (APT) group’s activity is tracked in the cybersecurity community under several names (see Cybersecurity industry tracking), primarily as “LAUNDRY BEAR,” a name initially coined by the Netherlands General Intelligence and Security Service (AIVD) and Defence Intelligence and Security Service (MIVD) [1].

LAUNDRY BEAR’s targeting is almost certainly to gather sensitive information for the Russian Federation, with these actors primarily focusing on the covert acquisition of email data. Previous campaigns indicated LAUNDRY BEAR relied on unsophisticated initial access techniques—including password spraying, phishing, and pass-the-cookie—allowing the group to successfully run high-volume operations. The latest campaign targeting ZCS uses a novel exploit that was a zero-day vulnerability when first exploited and continues to be successfully exploited. The vulnerability, Common Vulnerabilities and Exposures (CVE) CVE-2025-66376, was patched in November 2025. This demonstrates LAUNDRY BEAR’s intent and ability to deploy increasingly sophisticated technical capabilities.

Unlike traditional phishing campaigns that persuade a user into taking an action, such as clicking a link or opening a file, LAUNDRY BEAR’s latest campaign leverages a view-based exploit that only requires a user to view a malicious email within a vulnerable version of the webmail service. Once viewed, the exploit attempts to exfiltrate the victim’s last 90 days of email communications, the organization email directory (i.e., Global Address List [GAL]), and other sensitive information to servers controlled by LAUNDRY BEAR. The exploit also attempts to establish persistent access to victim accounts through a variety of means as detailed in the Persistence and credential access section.

This Cybersecurity Advisory (CSA) warns of this ongoing malicious threat activity and urges organizations to update their vulnerable software and implement additional mitigations to thwart these Russian state-supported actors’ continued success. The CSA is being released by the following authoring and co-sealing agencies:

• United States National Security Agency (NSA)
• United States Federal Bureau of Investigation (FBI)
• Netherlands Defence Intelligence and Security Service (MIVD)
• Netherlands General Intelligence and Security Service (AIVD)
• United States Cybersecurity and Infrastructure Security Agency (CISA)
• United States Defense Counterintelligence and Security Agency (DCSA)
• United States Department of Defense Cyber Crime Center (DC3)
• United States Department of the Treasury
• United States Naval Criminal Investigative Service (NCIS)
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Communications Security Establishment Canada’s (CSE’s) Canadian Centre for Cyber Security (Cyber Centre)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• United Kingdom National Cyber Security Centre (NCSC-UK)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)¹
• Danish Defence Intelligence Service (DDIS)²
• Estonian Foreign Intelligence Service (EFIS)³
• Finnish Defence Intelligence (FDI)⁴
• Finnish Security and Intelligence Service (SUPO)⁵
• French General Directorate for Internal Security (DGSI)⁶
• French National Cybersecurity Agency (ANSSI)⁷
• Italian External Intelligence and Security Agency (AISE)⁸
• Italian Internal Intelligence and Security Agency (AISI)⁹
• Security and Intelligence Service of the Republic of Moldova (SIS RM)¹⁰
• Polish Foreign Intelligence Agency (AW)¹¹
• The Military Counterintelligence Service of Poland (SKW)¹²
• Spain National Intelligence Centre (CNI)¹³
• Sweden National Cyber Security Centre (NCSC-SE)¹⁴

The authoring agencies urge any organizations using ZCS to implement the recommendations listed within the Mitigations section of this advisory to reduce the risk associated with this activity. This CSA also includes specific remediations for organizations to implement if they discover the presence of the listed Indicators of compromise (IOCs).  

As more organizations update their ZCS software based on this CSA, LAUNDRY BEAR may discontinue the current campaign exploiting this vulnerability; however, based on the success of this and previous campaigns, it is very likely that the group will continue to target ZCS and other email systems used by organizations in Western countries. The actors will almost certainly continue to rely on email to engage potential victims by exploiting novel vulnerabilities and, when necessary, use social engineering techniques to assist with their efforts. The authoring agencies recommend organizations regularly update their mail service software and continuously monitor their email systems and emails for malicious activity.

For a downloadable list of IOCs, see:

• AA26-204A.stix.xml (STIX XML)
• AA26-204A.stix.json (STIX JSON)

Cybersecurity industry tracking

The cybersecurity industry provides overlapping cyber threat intelligence, indicators of compromise (IOCs), and mitigation recommendations related to these Russian state-supported cyber actors. While not exhaustive, the following are threat group names commonly used for these actors within the cybersecurity community:

• LAUNDRY BEAR
• Void Blizzard [2]
• CL-STA-1114 [3]
• TA488 (formerly UNK_PitStop) [4]

Note: Cybersecurity companies have different methods of tracking and attributing cyber actors, and this may not be a 1:1 correlation to the U.S. government’s understanding for all activity related to these groupings.

Background

Public advisories from Netherlands General Intelligence and Security Service (AIVD), Netherlands Defence Intelligence and Security Service (MIVD), and Microsoft highlighted these Russian state-supported advanced persistent threat (APT) actors in May 2025, calling them LAUNDRY BEAR and Void Blizzard respectively [1] [2]. Both advisories assessed that the group was engaged in malicious cyber activity as early as April 2024.  

The May 2025 advisories highlighted a cluster of activity targeting cloud-based email environments, including Microsoft Exchange in particular, and abusing legitimate APIs to perform data exfiltration in bulk [T1114.002]. The group relied on unsophisticated means of initial access, including procuring stolen credentials on criminal marketplaces [T1078], and using social engineering techniques to lure targets into interacting with a malicious site masquerading as a legitimate one. As of April 2025, one of these sites resembled a European Defence & Security Summit registration portal that required registrants to sign in to their Microsoft account to view. Once a user entered their Microsoft credentials into this malicious site, LAUNDRY BEAR’s modified version of the open source adversary emulation toolkit, Evilginx, intercepted the user’s credentials. LAUNDRY BEAR then used this authentication data, including passwords and session tokens, to access the compromised account and conduct mass email exfiltration, as well as harvest other information. This method of compromise is commonly known as an adversary-in-the-middle (AiTM) technique [T1557].  

Beginning around July 2025, LAUNDRY BEAR shifted toward a more technical method of email compromise, highlighting their continued efforts to covertly acquire email communications from a variety of Western organizations of interest and deliver them to the Russian Federation. Using a custom-developed capability [T1587.001] named “Улей” or “Ulej” (Russian for beehive), LAUNDRY BEAR successfully targeted and exfiltrated sensitive user information from organizations who use the Zimbra Collaboration Suite (ZCS) product [T1114]. Data LAUNDRY BEAR attempted to exfiltrate from compromised accounts included:

• Last 90 days of emails,
• Email address,
• Password [T1589.001],
• Global Address List (GAL) [T1087],
• Two-factor authentication (2FA) tokens, and
• Newly-created Application Passcode [T1098].

The covert and persistent nature of this activity, along with the absence of any known financial extortion, almost certainly indicates this group’s involvement in espionage activities with Russian government backing. Additionally, extensive Ukrainian targeting, prior to use against U.S. and other NATO allies, outlines an increasing trend within Russian cyber threat groups to target Ukrainian users first—both as a priority target and as a testbench for malicious cyber techniques before broader global deployment.

Targeting details

LAUNDRY BEAR has targeted and compromised users in various organizations, including those associated with:

• the Defense Industrial Base (DIB),  
• the federal and local government,
• education,
• energy,
• law enforcement,  
• media,  
• non-governmental organizations, and
• technology.

Technical details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise framework, version 19. This advisory also uses MITRE D3FEND^TM version 1.4.0¹⁵. See Appendix A and Appendix B for tables of the activity mapped to MITRE ATT&CK and D3FEND tactics, techniques, and countermeasures.

Ulej is a novel data exfiltration and aggregation capability, that currently (as of the publication of this report) supports a campaign specifically targeting users of ZCS webmail servers. This capability is used to exploit CVE-2025-66376 [Common Weakness Enumeration (CWE) CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')], but likely could be adapted to exploit other vulnerabilities. It exfiltrates emails and other sensitive user data from a victim’s system immediately after exploitation and stores the data in an actor-controlled unattributable virtual private server (VPS) [T1074.002] running LAUNDRY BEAR’s “Flowerbed” collection framework. The collected data is almost certainly further exfiltrated to internal network resources for review and long-term retention.

Reconnaissance

LAUNDRY BEAR uses the Ulej capability to exploit the CVE-2025-66376 vulnerability in organizations using ZCS. This campaign’s targeted victimology and limited exploitation capabilities likely indicate this group manually identifies and targets the victim organizations. LAUNDRY BEAR likely identifies organizations with public-facing Zimbra infrastructure by port scanning [T1595] and fingerprinting datasets easily procured through various commercial vendors [T1596.005].  

After identifying a target organization, the group likely compiles email addresses for individual users to target with the exploit [T1589.002] from datasets offered by commercial vendors [T1597.002], open source intelligence [T1593], or previously exfiltrated data [T1597].  

Resource development

The actors procure VPSs from a variety of providers [T1583.003], including those with Know Your Customer (KYC) requirements, and often use fabricated identities. LAUNDRY BEAR primarily uses Mullvad VPN [T1583] when interacting with these servers, further demonstrating the group’s intent to mask their identity and maintain operations security (OPSEC). After the server is provisioned, an automated process deploys the Docker containers necessary for Ulej’s Flowerbed framework [T1608], which then receives and aggregates the data Ulej exfiltrates. These servers are typically only used for 7-60 days before moving to new infrastructure.

Flowerbed framework

Flowerbed is a Python project that uses Docker for containerization. The project includes four different Docker containers:

• Catcher,
• Certbot,
• Nginx, and
• Gardener.

Catcher acts as both a DNS and HTTP server to receive and aggregate exfiltrated victim information [T1048]. For additional information on Catcher, refer to the Exfiltration section of this advisory. Flowerbed’s next container, Certbot, is based on one of the official Certbot containers, which allows for automated generation of Let’s Encrypt certificates using DNS challenges through Cloudflare. This certificate can then be used by the Nginx container, which serves as an HTTPS reverse proxy for Catcher, enabling Flowerbed to disguise some of its exfiltration activity through an encrypted communications channel [T1048.002]. The Nginx reverse proxy also validates that the Server Name Indicator (SNI) value contains “*.i.*” prior to forwarding the traffic to Catcher. If the SNI does not contain that string, the Nginx server returns a 444 error to the client. This is likely an attempt to reject non-Ulej connections. Finally, the Gardener container functions as a health check for the Catcher service. Gardener is a simple Python script that validates Catcher correctly receives and processes data.

The simplistic Flowerbed codebase has indications that artificial intelligence (AI) played a role in its development. This highlights how AI is increasingly being used to develop malicious capabilities [T1588.007]. The dependence on AI for a simple capability, such as Flowerbed, alongside a previous reliance on open source capabilities, such as Evilginx2 [T1588.002], likely indicates a lack of advanced technical knowledge within LAUNDRY BEAR, especially in relation to true software development capabilities.

Initial access

To gain initial access, LAUNDRY BEAR sends an email containing a malicious JavaScript payload to the target [T1566]. Through exploitation of CVE-2025-66376, this JavaScript payload is immediately executed once the user views the malicious email [T1203], such as the one shown in Figure 1, in the ZCS webmail platform. Since at least November 2025, LAUNDRY BEAR began sending these phishing emails from victim infrastructure through compromised accounts [T1199], as shown in the email metadata in Figure 2. These compromised accounts were likely previous victims of this, or another LAUNDRY BEAR, campaign and their use is intended to further obfuscate and frustrate anti-phishing tools and training.

According to the National Vulnerability Database (NVD), CVE-2025-66376 was initially published on 5 January 2026. This vulnerability allows for execution of a JavaScript payload included in email content due to improper sanitization of Cascading Style Sheet’s (CSS) @import directives within an email [5]. Because the activity attributed to this campaign began in July 2025—months before Synacor released a patch and the CVE was published—the payload initially exploited a zero-day vulnerability at that time [T1587.004].  

Utilization of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability.

Hidden in LAUNDRY BEAR’s email is a Base64 encoded payload within the “onload” field of a Scalable Vector Graphics (SVG) element [T1027.017], as shown in Figure 3. Leading up to the inclusion of this payload in the SVG element are various instances of @import directives, as required to leverage CVE-2025-66376. This payload includes an XOR encrypted final script encoded in a Base64 inner payload (see Figure 3) [T1027.013]. The outer payload decodes and decrypts the inner payload using an XOR function and a hardcoded key and then executes the script contained within the inner payload containing the collection and exfiltration logic. By changing the key used for the XOR encryption of the inner payload or adding additional @import directives with non-functional code [T1027.010], LAUNDRY BEAR can easily generate new payloads that bypass basic threat detection signatures. This malicious payload attempts to collect and exfiltrate information in 12 asynchronous stages [T1119]. The stages in order of appearance within the payload are as follows:

1. sendStartPing,
2. gather_email,
3. gather_environment,
4. gather_2fa_codes,
5. gather_app_password,
6. gather_device_status,
7. gather_oauth_consumers,
8. gather_autocomplete_password,
9. enable_mail_protocols,
10. gather_gal,
11. sendArchives, and
12. sendFinishPing. 

Use of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability [T1587].

Persistence and credential access

To establish sustained persistence into the victim’s email account, the script attempts to modify account preferences and collect authentication information. Any collected credentials are later exfiltrated, as further described in the Exfiltration section below. Other campaigns attributed to LAUNDRY BEAR also demonstrated the group’s ability to circumvent multi-factor authentication through session token replay [T1550.004], and the Zimbra campaign follows a similar trend.

The script used in this campaign tries to discover the victim’s email address during the gather_email stage [T1087]. The script searches for this email address in two ways. First, it examines the batchInfoResponse variable, which an HTML script element on the webpage can define, for an email address. Even if the script finds an email address there, it also checks whether it acquired a Cross-Site Request Forgery (CSRF) token as described later in the Collection section of this advisory. If so, the script uses the “GetIdentitiesRequest” Simple Object Access Protocol (SOAP) command under the “ZimbraAccount” namespace to determine the victim’s email address [T1185] and then exfiltrates it. However, if the script does not have a CSRF token or the SOAP request fails, the script exfiltrates the email value recovered from the first method instead. If both attempts fail to capture the victim’s email, the script sends a JavaScript Object Notation (JSON) payload with a key of “email” and value of null over HTTPS and does not attempt DNS exfiltration.

During the gather_autocomplete_password stage, the script attempts to collect the victim’s saved password via the autocomplete feature of the victim’s password manager. The script injects two HTML div elements requesting login credentials onto the page outside of the victim’s view, as shown in Figure 4 and Figure 5. After waiting five seconds, the script then attempts to extract the password provided automatically by the password manager from the input element shown in Figure 4. If there is no value in that input field, it checks the password input field shown in Figure 5. If neither input field contains a value, a JSON payload with a key of “autocomplete_password” and value of null is sent over HTTPS and DNS exfiltration is not attempted.

LAUNDRY BEAR almost certainly relies on a mail client using the Internet Message Access Protocol (IMAP) for persistent access to the victim’s mailbox. During the enable_mail_protocols stage, a SOAP request leveraging the “ModifyPrefsRequest” command under the “ZimbraAccount” namespace is sent. This request attempts to set the “zimbraPrefImapEnabled” preference to TRUE. While the default setting for “zimbraPrefImapEnabled” is not well documented, this action is almost certainly intended to ensure that IMAP access to the victim’s mailbox is enabled.

ZCS does not support 2FA for some mail clients, including IMAP. To support users who rely on IMAP clients, ZCS allows for the generation of Application Passcodes. Application Passcodes are randomly generated passwords that can be used for clients that cannot support the normal 2FA process to authenticate. During the gather_app_password stage, the script makes a SOAP request using the “CreateAppSpecificPasswordRequest” command under the “ZimbraAccount” namespace to create a new Application Passcode [T1556.006]. The SOAP request uses “ZimbraWeb” as the name of the application.

Additionally, the script also attempts to collect 2FA tokens. During the gather_2fa_codes stage, the script makes a SOAP request using the “GetScratchCodesRequest” command under the “ZimbraAccount” namespace. The script then attempts to exfiltrate any non-null 2FA codes collected this way. The number of codes can vary, and each code is exfiltrated to Flowerbed individually.

Collection

As demonstrated in the Persistence and credential access section, this script relies heavily on SOAP requests to collect victim information. To make these requests, the script aims to acquire the victim’s current CSRF token, which it attempts to access within the webpage’s local storage using localStorage.getItem("csrfToken"). If the script is unable to acquire this CSRF token, it will be unable to make any SOAP requests. In addition to the SOAP commands documented in the Persistence and credential access section, other SOAP commands executed to collect victim information are shown in Table 1.

The script attempts to collect the victim’s GAL through brute force by searching for each two-character combination from a character set of “abcdefghijklmnopqrstuvwxyz1234567890.-_”. These queries are conducted using 20 batches of SOAP requests with 77 “SearchGalRequest” SOAP commands in each batch except for the last request containing only 58.

During the gather_environment stage, the script attempts to determine which type of ZCS webmail client the victim is using. The script checks the user’s current URL to determine the client type being used, checking for certain indicators (shown in Table 2) to determine the client type. The corresponding value is then used as the payload when exfiltrating the client type.

As part of collection, the script attempts to harvest any emails not marked as “junk” from the last 90 days from the victim’s account. Emails are collected daily by an HTTP GET request to the URL path, “/home/~/?fmt=tgz&meta=0&query=date:-{DAY_OFFSET}d AND (not in:junk)”. The {DAY_OFFSET} value would be between 0 and 89 representing how many days ago the email was sent or received. To prevent redundant collection and exfiltration of emails, a variable with a name based on the email date being queried, using a format of zd_comp_YYYY-MM-DD, and value of true, is saved to the window.top.localStorage property. This variable is saved regardless of whether the email is successfully exfiltrated.  

According to Mozilla documentation, if the user is not in a private browsing session, any data stored to localStorage does not typically expire. This means that if the user happens to execute the script again from the same computer, the script avoids attempting to re-exfiltrate previously captured emails. However, the script always attempts to pull any emails with a {DAY_OFFSET} of zero. In other words, the script always pulls emails sent or received the same day it is run. After email results are returned from the query for each day of email activity, those results are then passed to Flowerbed as described in the Exfiltration section.

The script also provides LAUNDRY BEAR with telemetry on any errors that occur during the collection process. This is accomplished by executing any collection or exfiltration code through helper functions that contain error handling logic. If an error occurs, a payload containing information on the error itself, the context of the error happening, and the stage in which the error occurred is sent to Flowerbed as described in the Exfiltration section below. For cases where the error occurs within a SOAP request, “:api” is concatenated to the stage value in the payload. If an error occurs during the batch SOAP requests that occur when collecting the GAL of the victim, the stage value will use a format of gather_gal:{VAL}:api. The {VAL} placeholder indicates which batch request, a number from 0 to 19, the error occurred in. Errors that occur during the password autocomplete interception process will use “gather_autocomplete_password:dom” for the stage value. Finally, if an error occurs when attempting to collect or exfiltrate a specific day’s emails, the stage will include which day the error occurred on, using the previously defined placeholder {DAY_OFFSET}, with a format of sendArchive:day-{DAY_OFFSET}.

Exfiltration

At the end of each stage in the collection process, the script attempts to exfiltrate acquired information to Flowerbed. The script primarily relies on two forms of data exfiltration: DNS [T1048.003] and HTTPS. Some information is exfiltrated over both the DNS and HTTPS channels.

Prior to exfiltration, a randomized 10- or 11-character alphanumeric string is generated as an identifier for the victim. This identifier is included in the URL of both the DNS- and HTTPS-based exfiltration.  

DNS exfiltration

DNS exfiltration occurs through DNS A record queries. To ensure data exfiltrated through DNS is not corrupted when traversing through non-actor-controlled DNS infrastructure, Ulej maintains compliance with RFC 1035, Domain Names - Implementation and Specification, specifically accounting for the case insensitivity and subdomain length requirements. Base32 encoding is used to create a case-insensitive payload. Once the payload is encoded, a period (“.”) is added every 60 characters to ensure each subdomain is under 63 characters long. The script then creates a new image object sourced from a URL with the scheme defined in Figure 6. Any traffic involving DNS exfiltration will have “d-“ prefixing the victim identifier, and the subdomain immediately following indicates the type of information being exfiltrated.

When the script generates an image object, the browser tries to retrieve the complete domain of the URL specified as the source of the image. This triggers a DNS request sent to the actor-controlled server and processed by Flowerbed. Table 3 lists both the information exfiltrated via DNS and their corresponding data type identifiers in the DNS queries.  

HTTPS exfiltration

Any information exfiltrated via DNS is also exfiltrated through HTTPS, as well as additional data including email content, contacts, attachments, and error logging information. By using Let’s Encrypt certificates, this group can quickly deploy new infrastructure and leverage encrypted HTTPS communications with valid server certificates when exfiltrating information from the victim’s environment. The HTTPS exfiltration capability only uses two HTTP content types, defined in Table 4. Traffic associated with HTTPS exfiltration will use the URL scheme shown in Figure 7.  

Some of the data transmitted via HTTPS uses the standard JSON content type format. The script includes the information in a POST request to actor-controlled infrastructure.  

Table 5 provides a summary of the JSON-based exfiltration.

The script transmits all HTTPS exfiltration not identified in Table 5 using the Octet-Stream content type as binary data. The POST requests for this method include a filename in the “X-Filename” header. Traditionally, developers use headers prefixed with “X-” to denote custom headers that do not follow a defined standard. The purpose of including this header remains unclear since the Catcher capability ignores the provided filename when saving the data. Table 6 summarizes the data exfiltrated in this format.

The script sends all exfiltrated data identified in Table 6 to the Catcher service exactly as received from the SOAP request in a JSON payload, except for email exfiltration. For email exfiltration, the script sends it as a GZIP compressed archive [T1560]. Although most of the exfiltration consists of valid JSON, the script still attempts to exfiltrate all information identified in Table 6 using the application/octet-stream content typing rather than application/json.

At the beginning and end of the collection and exfiltration activity, during the sendStartPing and sendFinishPing stages respectively, the script submits a POST request with a JSON payload to indicate that the script is starting or finishing execution. Throughout execution, the script also logs error events and send the logs using similar JSON payloads. The script sends the JSON in a POST request to the URL documented in Figure 2, using a URL path of “/v/p” and with a “subtype” key that shows which type of action it logged (start, finish, or error).  

Catcher

Ulej exfiltrates information to Flowerbed to be handled by a service named Catcher. Catcher is a containerized Python application, running in Docker as part of Flowerbed, which is detailed in the Resource development section. It receives exfiltrated data and temporarily stores it, enabling its eventual transfer to infrastructure designed for long-term, secure storage.

Catcher acts as an HTTP server over port 8000 and a DNS server on port 53. As described in the Resource development section, the Flowerbed project uses an additional Docker container running an Nginx reverse proxy to enable HTTPS support. This reverse proxy uses a certificate generated by Let’s Encrypt and forwards all traffic with an SNI containing “*.i.*” to port 8000 within the Catcher container.

The DNS service can accept A, AAAA, MX, TXT, and CAA queries. For any MX, AAAA, or CAA queries, the server will always provide an empty response. The system only supports TXT records as needed to process Automatic Certificate Management Environment (ACME) requests, which enable the assignment of Let’s Encrypt certificates. If the server receives an A query, Catcher will always respond with the public IP address of the Flowerbed server.  

However, if a query includes a domain formatted as shown in Figure 6 and Figure 7, the service saves a log file in JSON format to disk containing the following details of the DNS query:

• Time of query,
• Source IP address for query,
• Queried domain, and
• Type of query.

The HTTP server typically responds with OK, except in cases where the path is “pixel.gif” when the response contains a 1x1 gif image with a SHA-256 hash of ef1955ae757c8b966c83248350331bd3a30f658ced11f387f8ebf05ab3368629. Like the DNS service, the HTTP service will only log entries when the domain found in the host header of the request follows the expected formatting as seen in Figure 6 and Figure 7. As the HTTPS exfiltration uses non-standardized binary and JSON-formatted payloads when exfiltrating to Catcher, Catcher will check the content type of the request. If the content type is set to “application/json”, Catcher encodes the data in Base64 and includes it in the JSON log entry written to disk. If the content type is set to any other value, Catcher leaves the Base64 payload in the JSON log entry blank and saves the payload to a separate file with the same filename as the JSON log entry with a “.bin” file extension. An HTTPS exfiltration event causes Catcher to save a JSON formatted log file to disk containing the following information from the HTTP request:

• Time,
• Source IP address,
• Request method,
• Host,
• Path,
• Query string,
• Headers, and
• Base64 payload.

These JSON event log files and binary output files are then initially saved to the directory /root/hits/tmp and later moved to the /root/hits/ready directory once processed. This prevents incomplete files, which are still being uploaded to Catcher, from premature exfiltration from the server. Approximately every 60 seconds, a likely automated workflow establishes a Secure Shell (SSH) connection with the server hosting Flowerbed for a few seconds, almost certainly exfiltrating the data processed by Catcher to non-public-facing infrastructure. The command in Figure 8 also executes hourly to remove all files last modified at least two days ago from the /root/hits/ready directory.

Response strategies

Mitigations

In many cases, by the time an organization identifies a compromise related to this campaign, numerous sensitive and proprietary emails have already been exfiltrated. The significant risk posed by this cyber threat emphasizes the importance for organizations that use ZCS and other similar webmail solutions to take proactive steps to mitigate this risk.

All organizations that use the ZCS webmail service should immediately prioritize ensuring that their ZCS is not running a vulnerable version. A patch for CVE-2025-66376 was released for both 10.1.13 and 10.0.18 versions of ZCS [D3-AH]. If immediate patching is not feasible, organizations should advise employees to use alternative mail clients to access email and avoid using the Classic ZCS webmail client until ZCS is updated to a non-vulnerable version [d3f:Isolate].

System administrators should closely monitor any Internet-connected ZCS or other email systems and the workstations that access those systems and promptly apply available software updates [D3-AH]. Administrators can maintain awareness of active vulnerability exploitation by referencing open source resources, including CISA’s Known Exploited Vulnerabilities Catalog and NCSC-UK’s Responding to active exploitation of vulnerabilities guidance.

Organizations should consider using a third-party authentication service that supports passkeys for authentication to mediate access to ZCS and other services that do not natively support passkeys. By doing so, organizations can work to eliminate the possibility of automated password collection from autocomplete or password reuse [D3-CH]. However, Application Passcodes may still be necessary and should be monitored closely.  

Organizations should implement network monitoring capabilities with collection and short-term retention of packet capture or NetFlow data and maintain log collection and storage [CPG 3.Q]. This will allow organizations to monitor for and identify suspicious network activity [CPG 4.B], such as:

• Significant amounts of outbound data being sent to IPs associated with VPS providers not used by the organization [D3-NTA];
• Frequent DNS queries for a suspicious domain with seemingly random subdomains [D3-DNSTA];
• A sudden spike of connections to a server associated with a recently established domain [D3-NTCD]; and  
• Connections to internal services, such as webmail, from VPN providers frequently leveraged by this group for nefarious activity, such as Mullvad VPN [D3-NTCD].

Additionally, for organizations that can inspect the content of outbound HTTPS connections via break-and-inspect infrastructure, security teams should identify traffic matching the characteristics described in the Exfiltration section of this advisory.

Indicators of compromise (IOCs)

Flowerbed infrastructure

The following indicators have been attributed to use by LAUNDRY BEAR for their campaign targeting ZCS’s webmail service as of the publication of this advisory. (Disclaimer: Due to the frequency of operational structure changes by this group, these indicators are intended solely for historic attribution purposes. Some indicators, such as IPs, compromised emails, and domains, may be outdated, so organizations should check for current activity before acting on these IOCs.) Table 7 provides details about the server infrastructure used to host Flowerbed, and Table 8 lists the corresponding SHA-1 hash values for the Let’s Encrypt certificates used by that infrastructure [D3-IAA].

LAUNDRY BEAR has used the following email addresses to procure resources used for this campaign:

• ivanka.zurabishvili@proton[.]me,
• zmul1@buildandconsulting[.]com,
• garrysmithme@pinmx[.]net, and
• hostingclient@pinmx[.]net.

Phishing distribution

LAUNDRY BEAR primarily relied on ProtonMail for distribution of malicious email. However, as stated above, LAUNDRY BEAR’s more recent efforts likely have shifted to distributing the payload through previous victims.  

The following email addresses have distributed payloads attributed to this campaign:

• c.laurent.ejfa@proton[.]me,
• j.moreau.epsc@proton[.]me,
• liberty.insights@proton[.]me,
• certain email addresses (presumably compromised) at the isofts.kiev[.]ua domain (i.e., ending with @isofts.kiev[.]ua), and
• certain email addresses (presumably compromised) at the navs.edu[.]ua domain (i.e., ending with @navs.edu[.]ua).

Additionally, the following are SHA-256 hashes of email samples containing the malicious payload attributed to this campaign:

• 98df604ecc57f884a2e6ce3266a0013ad64455cac48442c2312cfa4765007aaf,
• 60db9abae75cd8ccc49dd7ea5feb41677566dcd442f12ebc5745ffd2810fb874,
• b1f5beb1175fc5c7d1806a2f0d900eb124c54f0286c5c52b66eea7a6633adb1d, and
• 1517b3caa495f6c4e832df9c75fc94667e3c233773f7fa4e056d5e30e5ead760.

Post-compromise artifacts

Currently, the script does not remove artifacts. This leaves additional opportunities to identify victims of this activity. While emphasis should always be placed on consistent monitoring of network traffic and endpoint activity, there are a variety of persistent artifacts described below that can be used to identify victims of this campaign.

This Ulej capability relies on creating a significant number of SOAP requests to collect account information for exfiltration. ZCS logs from these requests are stored, by default, in the /opt/zimbra/log/mailbox.log file [D3-PA]. A significant amount of SOAP request activity that aligns with what was described in the Persistence and credential access and Collection sections of this advisory could indicate a potential compromise. Specific examples of high-risk SOAP request activity might include:

• Many SearchGalRequest command requests from a single user over a short period of time;
• Use of the CreateAppSpecificPasswordRequest command, especially in cases where it is creating an Application Passcode named “ZimbraWeb”; and
• Use of the GetScratchCodesRequest command.

While LAUNDRY BEAR uses the localStorage property to track what days had emails previously exfiltrated, defenders can use this property to identify victims of this campaign and determine the scope of exfiltrated information [D3-PA]. Review of the items stored in that property for an organization’s ZCS webmail client page on an endpoint device could indicate compromise if there are items named with a format of zd_comp_YYYY-MM-DD, as explained in the Collection section of this advisory.

While Application Passcodes have non-malicious purposes, in this case instances of these passcodes with the name “ZimbraWeb” are almost certainly malicious. The ZCS webmail application can support 2FA natively and does not require the use of an Application Passcode, so there is no reason that there should be one named “ZimbraWeb.”

In instances where organizations identify victims of this campaign, they should also examine the inbox of the suspected victim for the original phishing email [D3-MA]. If an email that has a payload exploiting CVE-2025-66376 is discovered, steps should be taken immediately to identify and quarantine other instances of emails with similar body content, senders, and subject lines to prevent further exploitation and exfiltration.  

Remediation

In the event an organization identifies activity associated with this campaign, that organization should take steps to minimize further exploitation. The organization should consider requesting that employees minimize use of the ZCS webmail client until the organization updates to a patched version that is not vulnerable to CVE-2025-66376.

Organizations should use identifiers from the IOCs section of this report to identify any individuals compromised by this campaign and record the date(s) of compromise(s) to determine the scale and scope of emails exfiltrated.

All users from the organization should have all Application Passcodes and 2FA scratch keys revoked. Affected organizations should require all employees to change passwords in line with establishing minimum password strength requirements [CPG 3.B] and creating unique credentials [CPG 3.C], specifically noting that compromised employees might have had any password stored in a password manager exfiltrated.

Works cited

[1] Netherlands General Intelligence and Security Service (AIVD) and Netherlands Defence Intelligence and Security Service (MIVD). AIVD and MIVD identify a new Russian cyber threat actor. 2025. https://www.aivd.nl/site/binaries/site-content/collections/documents/2025/05/27/aivd-en-mivd-onderkennen-nieuwe-russische-cyberactor/Advisory+AIVD+en+MIVD+Public+report+on+new+cyber+actor.pdf

[2] Microsoft Corporation. New Russia-affiliated actor Void Blizzard targets critical sectors for espionage. 2025. https://www.microsoft.com/en-us/security/blog/2025/05/27/new-russia-affiliated-actor-void-blizzard-targets-critical-sectors-for-espionage/

[3] Palo Alto Networks Unit 42. Russian Global Webmail Espionage. 2026. https://unit42.paloaltonetworks.com/russian-webmail-espionage/ 

[4] Proofpoint. TA488 Targets Zimbra Mailservers with Half-Click Exploits. 2026. https://www.proofpoint.com/us/blog/threat-insight/ta488-zcs-exploit

[5] Seqrite. Operation GhostMail: Russian APT exploits Zimbra Webmail to Target Ukraine State Agency. 2026. https://www.seqrite.com/blog/operation-ghostmail-zimbra-xss-russian-apt-ukraine/  

Footnotes

¹ Národní úřad pro kybernetickou a informační bezpečnost
² Forsvarets Efterretningstjeneste
³ Välisluureamet
⁴ Sotilastiedustelu
⁵  Suojelupoliisi
⁶ Direction générale de la sécurité intérieure
⁷ Agence nationale de la sécurité des systèmes d’information
⁸ Agenzia Informazioni e Sicurezza Esterna
⁹ Agenzia Informazioni e Sicurezza Interna
¹⁰ Serviciul de Informații și Securitate al Republicii Moldova
¹¹ Agencja Wywiadu
¹² Służba Kontrwywiadu Wojskowego
¹³ Centro Nacional de Inteligencia
¹⁴ Nationellt Cybersäkerhetscenter
¹⁵ MITRE and ATT&CK are registered trademarks of The MITRE Corporation. MITRE D3FEND is a trademark of The MITRE Corporation.

Acknowledgements

The authoring agencies acknowledge the contributions to this advisory from Palo Alto Networks Unit 42 and Proofpoint.

Disclaimer of endorsement

The information and opinions contained in this document are provided "as is" and without any warranties or guarantees. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement, recommendation, or favoring by the United States Government, and this guidance shall not be used for advertising or product endorsement purposes.

Organizations have no obligation to respond or provide information back to the authoring organizations in response to this joint advisory. If, after reviewing the information provided, an organization decides to provide information to the authoring organizations, reporting must be consistent with all applicable laws and policies.

Purpose

This document was developed in furtherance of the authoring agencies’ cybersecurity missions, including their responsibilities to identify and disseminate threats, and to develop and issue cybersecurity specifications and mitigations. This information may be shared broadly to reach all appropriate stakeholders.

Contact

Appendix A: MITRE ATT&CK tactics and techniques

See Table 9 through Table 19 for all the threat actor tactics and techniques referenced in this advisory.

Appendix B: MITRE D3FEND countermeasures

See Table 20 for a mapping of several of the cybersecurity countermeasures mentioned in this advisory.

Posted by Alice Yuan, Developer Relations Engineer at Google, Arti Arutiunov, Product Manager at Datadog and Nikita Ogorodnikov, Staff Software Engineer at Datadog

Performance regressions are notoriously hard to reproduce, making regressions a massive bottleneck for mobile developers. Although signals like ANR rates indicate what issues occur in production, pinpointing the specific line of code that resulted in the performance issue has historically necessitated exhaustive manual reproduction or speculative trial-and-error experimentation.

Datadog collaborated with Google to mitigate this frustration by integrating the ProfilingManager API (available on Android 15+ devices) into its Real User Monitoring (RUM) and Continuous Profiling platforms. This integration transforms the debugging workflow, allowing developers to move beyond surface-level symptoms to being able to detect the why behind a performance bottleneck.

The impact of ProfilingManager

ProfilingManager is a system service introduced in Android 15 that enables apps to programmatically collect performance data such as call stack samples, field traces and memory heap dumps directly from production environments. This capability shifts the engineering paradigm from reactive manual reproduction to proactive field analysis.

Solving the Android code-level visibility challenge

Prior to the implementation of ProfilingManager, Datadog’s Real User Monitoring (RUM) focused on high-level application health and session-level telemetry to assess the user journey. Engineering teams could monitor Android performance signals like time to initial display, ANR rates, CPU load, and frozen frames. These insights extended to granular interactions, such as network latency, touch events, and main thread hangs. However, while this data effectively highlighted which performance bottlenecks were surfacing in the field, it provided no clear path to identifying the root cause of these failures.

To address this, Datadog needed a profiling engine capable of capturing Android traces directly from devices in production with minimal performance impact. After evaluating alternative approaches, such as writing their own trace processor using Android Debug APIs, the team selected ProfilingManager because it is the most performant solution of the profiling options they evaluated and offloads the sampling decisions overhead to the OS.

ProfilingManager supports a wide range of collection methods, including CPU traces, call stack sampling, memory analysis through Java heap dumps and native heap profiles. It enables developers to profile production builds, upload trace files to external storage, and review them in the Perfetto trace analyzer UI. As a SaaS provider, Datadog uploads, visualizes, and analyzes these profiles collected via its SDK, providing a unified view of application health.

• Granular session diagnostics: ProfilingManager enhances debuggability by delivering direct OS-level trace data, overcoming the visibility and alignment challenges typical of custom logging with system services. To dive deeper, developers can download these traces from Datadog to investigate further in visualization tools like the Perfetto UI.
• Automated telemetry triggers: By leveraging native system events to initiate trace recordings at key optimization points, Datadog reduces the need to build custom collection logic. While the initial rollout focuses on the APP_FULLY_DRAWN signal, there are already plans to expand this observability to include ANR, OOM, and COLD_START triggers.
• Proactive trace snapshots: By interfacing directly with the system-level Perfetto service (traced), ProfilingManager utilizes a proactive background recording model designed to capture unpredictable issues. This ensures that developers receive a precise visualization of the events leading up to a performance anomaly, offering a level of insight that exceeds what is possible through manual instrumentation.
• Bottleneck detection at scale: Datadog is able to synthesize telemetry from across Datadog’s global customer base to uncover regressions that only emerge under unique hardware configurations and variable network environments.
• System-enforced resource stability: The API leverages sampling trace collection to ensure performance and user experience impacts remain unnoticeable.
• On-device data controls: ProfilingManager filters out irrelevant information from other processes on-device before the profile is delivered to the app. This minimizes file sizes and ensures that only data relevant to the app's processes is provided.

Processing millions of weekly profiles to optimize real-world apps

Conclusion

By integrating Android’s ProfilingManager API, Datadog successfully closed the visibility gap between backend systems and mobile client applications for their customers. By processing millions of profiles weekly with negligible device overhead, Datadog equips Android developers with the code-level insights necessary to diagnose complex performance bugs instantly, helping developers build smoother applications and improve their app’s performance signals in the Play Store. To adopt the ProfilingManager API directly into your performance observability framework, check out our documentation.

In the future, Datadog aims to make Android profiling data a first-class input for coding agents to autonomously resolve performance bottlenecks, closing the feedback loop between detection and remediation. Datadog is working toward making Android profiling broadly accessible to developers.

To get started using the Datadog real user monitoring feature powered by ProfilingManager, visit Datadog Mobile Real User Monitoring.

Every year, Google I/O brings new announcements and resources across ecosystems and products, including Android development. As development shifts toward AI and agent-assisted tooling, we’ve expanded our offerings to better support you, however you decide to build for Android.

To help you stay up to date, here is a summary of the top 3 announcements for Android Developer Productivity at I/O.

1. Android CLI is now stable

Android CLI is now stable at version 1.0, with more capabilities and integrations.

The latest version of Android CLI introduces many new features, like programmatic version lookup and support for Journeys, and bridging capability to allow agents to integrate directly with Android Studio, via the studio command.

Running Android Studio alongside the agent and Android CLI enables more efficient navigation in your project, more precise output, and access to Android Studio’s unique tooling, such as performance profilers, Compose Previews, and Android Device Streaming.

Android CLI now integrates seamlessly with Android Studio

Additionally, Google Antigravity now officially supports Android development, with the Android resources bundle, which includes the Android CLI and skills.

You can either install the bundle during onboarding after installation, or later from the Settings > Customizations > Build With Google Plugins menu. This provides Antigravity with all the powerful tools and knowledge of Android CLI to enable it to perform core tasks—from creating projects to deploying your app on a new virtual device—much more easily and efficiently.

Google Antigravity now offers the Android resources bundle

Android CLI is now available through more package managers: like npm and homebrew. For more information, check out the Android CLI blog post and official documentation.

2. Android skills keep growing

To help models gain expertise for specific development patterns that follow our best practices, we are continuing to expand our repository of Android skills, available through Android CLI and GitHub.

Android skills ground LLMs in specialized workflows and domain knowledge, for the most common and more complex user journeys they might struggle with. We’ve shipped a fresh new batch of skills, with now more than 17 skills for areas such as:

• Adaptive UI
• Display Glasses and Jetpack Compose Glimmer for XR
• Migration to CameraX
• Perfetto SQL and Trace Analysis
• Jetpack Compose Styles API
• AppFunctions
• Verified email retrieval with Android Credential Manager
• Engage SDK integration
• Testing setup
• Wear OS Jetpack Compose Material3

Android skills keep growing

You can browse skills and install using the Android CLI commands:

android skills list
android skills add –skill=<skill-name>

For more information, check out the official documentation.

3. Android Bench adds new models

Earlier this year, we launched Android Bench - our leaderboard for testing LLMs on real-world Android development challenges and tasks, with the goal of accelerating model improvements, so you have more helpful options for AI assistance.

Latest results from Android Bench leaderboard

You asked us to evaluate open models. So, at I/O, we added more commonly used ones, including our local model Gemma 4, to the leaderboard. We also added the latest models including Gemini 3.5 Flash.

We are also working on increasing the difficulty of challenges we’re giving LLMs, including creating long running tasks, to continue encouraging improvements. These tasks will be coming soon to Android Bench. Check out the Android Bench leaderboard to see the latest results.

Android development anywhere

By expanding our AI-assisted Android development offerings to Antigravity, through Android CLI and Android skills, and solidifying with the pro capabilities and production grade polish of Android Studio, we’re supporting Android developers wherever they choose to build.

Have fun bringing your ideas to life faster and easier than ever before - we’re excited to see what you build in this new era of agentic development.

Check out the full Developer productivity at Google I/O 2026 YouTube playlist for more information.

Welcome back to the blog post series "Build intelligent Android apps" where we take a basic Android app and transform it into a personalized, intelligent, and agentic experience. In our previous post we explored how to build intelligent on-device features using Gemini Nano through ML Kit's Prompt API.

In this post, we will look at how you can leverage Firebase AI Logic to build cloud-hosted and hybrid AI features: 

• Grounding answers in real-world context
• Routing requests dynamically between cloud and local execution using hybrid inference
• Translating content with custom routing systems

Sometimes a use case requires AI models with greater world knowledge, a much larger context window, or the ability to handle complex queries. In those scenarios, we can leverage cloud models. 

Other times, you want the best of both worlds: using hybrid inference to run on-device when available to lower costs, while falling back to the cloud to ensure compatibility for all devices.

Cloud and hybrid features in Jetpacker: Museum assistant with web grounding, hybrid restaurant review drafting, and  support chat featuring custom-routed live translation.

Let’s look at how we implemented three cloud and hybrid features in Jetpacker:

• a museum assistant with web grounding
• hybrid restaurant review drafting
• hotel support chat featuring custom-routed live translation.

Use LLM grounding for up-to-date informationMuseum assistant chatbot with LLM grounding

The Museum assistant is an interactive chatbot designed to help users plan their museum visits. It provides visitors with up-to-date details regarding specific exhibits, current opening hours, ticket pricing, and more.

Museum assistant is a chatbot that answers questions, such as 

When building AI features, getting the model to answer with fresh, accurate, and specific real-world information is a common challenge. While cloud models possess massive amounts of world knowledge, they might not know about seasonal exhibits or the current day’s opening hours. 

Grounding data is added to the context window to enable the model

To bridge this gap, we can use grounding techniques to add extra context to the model’s context window. The Firebase AI Logic SDK supports three types of grounding:

• URL grounding: Grounding responses using content from a specific webpage (e.g. current ticket prices or museum rules).
• Google Search grounding: Letting the model query the real-time Google search index for up-to-date details.
• Maps grounding: Using Google Maps location data.

In Jetpacker, we dynamically construct the available tools based on enabled feature flags and initialize the generative model using the Firebase AI SDK:

// implementation("com.google.firebase:firebase-ai-logic")

private var toolList = mutableListOf<Tool>()

init {
    if (ENABLE_SEARCH_GROUNDING) {
        toolList.add(Tool.googleSearch())
    }
    if (ENABLE_URL_GROUNDING) {
        toolList.add(Tool.urlContext())
    }
}

private val generativeModel = Firebase.ai(backend = GenerativeBackend.googleAI())
    .generativeModel(
        modelName = "gemini-3-flash",
        systemInstruction = content {
            text("You are a helpful museum assistant answering questions about a museum. Use plain text.")
        },
        tools = toolList
    )

When the user queries the assistant, if URL grounding is enabled, we append the specific museum resource URLs directly into the prompt:

val groundingText = if (FeatureFlags.ENABLE_URL_GROUNDING) {
    "\n If the following message above is about the rules and terms to visit Le Louvre, " +
    "if needed answer this urls ${urlList.joinToString()}"
} else {
    ""
}

val prompt = "$text $groundingText"

var response = chat.sendMessage(prompt)

Hybrid inference: On-device review generation with Maps deep link

Not every AI task requires a cloud-based model, and not every device is online. To help developers balance latency, cost, and offline availability, we recently introduced the Firebase API for Hybrid Inference.

In Jetpacker, the restaurant review feature lets users review select topics and automatically drafts a review. To enable this for all users, we prioritize local execution with Gemini Nano, and fall back to cloud models on devices that don’t support Gemini Nano. 

// implementation("com.google.firebase:firebase-ai-logic")
// implementation("com.google.firebase:firebase-ai-ondevice:16.0.0-beta03")


// Initialize the model with hybrid routing configuration
val reviewModel = Firebase.ai.generativeModel(
    modelName = "gemini-3.1-flash-lite",
    onDeviceConfig = OnDeviceConfig(
        inferenceMode = InferenceMode.PREFER_ON_DEVICE
    )
)

The Hybrid Inference API supports four distinct routing modes:

• PREFER_ON_DEVICE: Prioritizes local execution and falls back to cloud if Gemini Nano is unavailable.
• PREFER_IN_CLOUD: Prioritizes cloud execution and falls back to on-device if the device goes offline.
• ONLY_ON_DEVICE: Restricts execution strictly to the device.
• ONLY_IN_CLOUD: Restricts execution strictly to the cloud.

Once the review is generated, we copy it to the clipboard and use an intent to open Google Maps directly to the restaurant's review page, providing a seamless user experience:

private fun copyAndOpenMapsReview(context: Context, reviewText: String, placeId: String) {
    val clipboard = context.getSystemService(Context.CLIPBOARD_SERVICE) as ClipboardManager
    val clip = ClipData.newPlainText("User Review", reviewText)
    clipboard.setPrimaryClip(clip)

    val uri = Uri.parse("https://search.google.com/local/writereview/mobile?placeid=$placeId")
    val intent = Intent(Intent.ACTION_VIEW, uri).apply {
        setPackage("com.google.android.apps.maps")
    }
    context.startActivity(intent)
}

Custom hybrid routing: Hotel support chat translation with simulated personas

The hotel support chat was built to let users finalize logistics and check on hotel details. This feature uses system instructions to configure a localized receptionist assistant. By passing specific information—such as the preferred language and hotel information—in the instructions, we can set up a conversational persona representing a specific hotel.

private val generativeModel = Firebase.ai(backend = GenerativeBackend.googleAI())
    .generativeModel(
        systemInstruction = content {
            text("""
              You are a helpful hotel receptionist at $hotelName only speaking $language. 
              Answer politely in $language. The bar closes at 10pm and breakfast is from 7am to 10am.
              There's someone at the desk 24/7. You can retrieve your luggage from the storage room 
              at the back of the lobby at any time.
              """)
        },
        modelName = "gemini-3-flash-preview"
    )

Because receptionist responses are in the hotel's local language (for example, French for Hotel Le Meurice in Paris), we need to translate messages to the user’s preferred language. 

Hotel support chat messages are automatically translated to the user’s preferred language 

While hybrid models can configure simple routing preferences, complex scenarios require custom routing logic. In Jetpacker, we implement a custom routing stack that takes into account:

• Language identification: Using the on-device ML Kit Language Identification API, we can detect the incoming message language.
• On-device translation (Gemini Nano): ML Kit’s Prompt API lets us translate common language pairs directly on the device, saving bandwidth and cloud cost.
• Cloud translation (Gemini 3 Flash): For more complex languages, we use Gemini Flash 3 to get a higher quality translation.

// implementation("com.google.android.gms:play-services-mlkit-language-id:17.0.0") 

// ML Kit for Language Identification (powered by Google Play Services)
private val languageIdentifier = LanguageIdentification.getClient()

// On-device translator model (prefer Gemini Nano) for translating common language pairs
private val hybridTranslationModel = Firebase.ai(backend = GenerativeBackend.googleAI())
    .generativeModel(
        modelName = "gemini-3-flash",
        onDeviceConfig = OnDeviceConfig(mode = InferenceMode.PREFER_ON_DEVICE)
    )

// Cloud translator model for more complex language pairs
private val cloudTranslationModel = Firebase.ai(backend = GenerativeBackend.googleAI())
    .generativeModel(
        modelName = "gemini-3-flash"
    )

When a message needs to be translated, we identify the source language and apply our custom routing logic, executing either on-device or cloud translation:

fun translateMessage(message: SupportChatMessage) {
    viewModelScope.launch {
        // 1. Detect language using ML Kit Language Identification
        val sourceLang = try {
            Tasks.await(languageIdentifier.identifyLanguage(message.text))
        } catch (e: Exception) {
            "Undefined"
        }

        // 2. Custom routing: we've verified the translation quality for English and Korean with Gemini Nano, and will translate message on-device for those two languages
        val routeToCloud = sourceLang != "en" && sourceLang != "kr"

        val prompt = "Translate the following text to $selectedLanguage. Just return the translated sentence: ${message.text}."

        val (translatedText, routePrefix) = if (routeToCloud) {
            val result = cloudTranslationModel.generateContent(prompt)
            result.text to "[Cloud]"
        } else {
            val result = hybridTranslationModel.generateContent(prompt)
            result.text to "[On-Device]"
        }

        if (translatedText != null) {
            _translations.update { current ->
                current + (message.id to "$routePrefix: $translatedText")
            }
        }
    }
}

In this example, the custom routing logic only takes into consideration the translation’s source and target language. However, based on your app’s use case, you can expand the routing logic to include other factors such as the on-device model version, network connectivity, battery status, and more.

Securing the AI Pipelines: Firebase App Check

Lastly, using AI in the cloud opens up possibilities of API key abuse or unauthorized billing. To secure API calls, we integrated Firebase App Check using both Play Integrity (production) and the local Debug Provider (for local development or emulators).

In the JetPackerApplication.kt file, we install the debug provider at startup and trigger anonymous authentication to establish a secure user session:

//  implementation("com.google.firebase:firebase-appcheck-playintegrity") 
//  implementation("com.google.firebase:firebase-appcheck-debug")  
//  implementation("com.google.firebase:firebase-auth") 

override fun onCreate() {
    super.onCreate()
    Firebase.initialize(context = this)
    Firebase.appCheck.installAppCheckProviderFactory(
        DebugAppCheckProviderFactory.getInstance()
    )
    Firebase.auth.signInAnonymously()
}

When building locally on an emulator, App Check prints a local token secret to logcat:

Enter this debug secret into the allow list in the Firebase Console: a8c2dd4c-xxxx-xxxx-xxxx-ef6c114ba27e

Once registered in the Firebase console, local requests are fully verified and authenticated by App Check, protecting our backend while letting us test the app locally.

Conclusion

By combining cloud model capabilities (grounding, system instructions) with on-device capabilities (hybrid routing, translation, security app checks), we created a travel app that is smart, secure, and available offline.

Check out the full source code for Jetpacker on GitHub, and explore the Firebase documentation to get started:

Firebase AI Logic Documentation
Firebase Hybrid Inference API

Learn more

Check out the other parts of this blog post series:

Part 1: Introduction of the app and a high-level overview.
Part 2: On-device intelligence. Deep-dive into ML Kit’s GenAI APIs and Gemini Nano to build privacy-first features like itinerary summarization, receipt parsing, and local audio processing.
Part 3 (this post!): Hybrid and cloud reasoning. Explore how to use Firebase AI Logic to ground LLM answers in real-world data like Google Maps and web context.
Part 4: System integration. Integrating with the Android intelligence system using AppFunctions. 
Part 5 (coming soon): In-app agentic workflows. Extend the app with an end-to-end booking assistant powered by A2UI and ADK.

Interested in more on Android Development? Follow Android Developers on YouTube or LinkedIn!

All code snippets in this blog post follow the following copyright notice:

Copyright 2026 Google LLC.
SPDX-License-Identifier: Apache-2.0

Introduction

Note: This advisory was originally published on April 7, 2026, to provide tactics, techniques, and procedures (TTPs) and indicators of compromise (IOCs) related to ongoing cyber exploitation of internet-connected operational technology (OT) devices by Iranian-affiliated advanced persistent threat (APT) actors. The authoring agencies updated this advisory on July 22, 2026, to add new guidance on detecting malicious changes in reusable code modules leveraged within Rockwell Automation PLC programs. It also expands the manufacturer scope to include observed targeting of Schneider Electric, Siemens, and potentially other branded/manufactured PLCs, emphasizing the importance of restricting direct internet access and providing best practice resources for secure deployment.

The Federal Bureau of Investigation (FBI), Cybersecurity and Infrastructure Security Agency (CISA), National Security Agency (NSA), Environmental Protection Agency (EPA), Department of Energy (DOE), United States Cyber Command – Cyber National Mission Force (CNMF), and Department of the Treasury (Treasury) (hereafter referred to as the “authoring agencies”) are urgently warning U.S. organizations of ongoing cyber exploitation of internet-connected OT devices—including PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, Siemens, and potentially other manufactured PLCs—across multiple U.S. critical infrastructure sectors. As a result of this activity, organizations from multiple U.S. critical infrastructure sectors experienced disruptions through malicious interactions with PLC project files¹ and the manipulation of data displayed on human machine interface (HMI) and supervisory control and data acquisition (SCADA) displays. In a few cases, this activity caused operational disruption and financial loss.

The authoring agencies assess a group of Iranian-affiliated APT actors is conducting this activity to cause disruptive effects within the United States. The group targeted devices spanning multiple U.S. critical infrastructure sectors, including Government Services and Facilities (to include local municipalities), Water and Wastewater Systems (WWS), and Energy Sectors. The authoring agencies previously reported on similar activity targeting PLCs by CyberAv3ngers (aka Shahid Kaveh Group)—a cyber threat actor affiliated with Iran’s Islamic Revolutionary Guard Corps (IRGC) Cyber Electronic Command (CEC).

Due to the widespread use of these PLCs, and the potential for additional targeting of other branded OT devices across critical infrastructure, the authoring agencies recommend U.S. organizations urgently review the TTPs and IOCs in this advisory for indications of current or historical activity on their networks, and apply the recommendations listed in the Mitigations section of this advisory to reduce the risk of compromise.

If owners and operators discover an affected internet-accessible device in their environment, additional technical measures may be necessary to evaluate the risk of compromise. Please engage your cyber incident response plans and contact the authoring agencies and applicable vendors through existing support channels available to customers and integrators (see Contact Information) to receive support, mitigation, and investigation assistance.

For more information on Iranian malicious cyber activity, see CISA’s Iran Threat Overview and Advisories webpage and the FBI’s Iran Threat and Iran Cyber Threat Overview webpages.

Download the PDF version of this report:

(New, July 22, 2026) For a downloadable copy of July 22, 2026 IOCs, see:

• AA26-097A STIX XML (XML, 29 KB)
• AA26-097A STIX JSON (JSON, 30 KB)

For a downloadable copy of historical April 7, 2026 IOCs, see:

Background Information

Similar Historical Activity Targeting Programmable Logic Controllers

During a similar campaign beginning in November 2023, the IRGC CEC-affiliated cyber threat actors known as "CyberAv3ngers” targeted U.S.-based PLCs and HMIs, causing disruptive effects. Private industry and open sources also refer to this group as Hydro Kitten, Storm-0784, APT Iran, Bauxite, Mr. Soul, Soldiers of Solomon, UNC5691, and the Shahid Kaveh Group. These attacks compromised at least 75 devices, targeting U.S.-based Unitronics PLC devices with an HMI used across multiple critical infrastructure sectors, including the WWS. APT actors developed and deployed custom ladder logic code to these devices, replacing the valid ladder logic with malicious code that continues to be observed to date.

For more information on this group’s activity, see the joint Cybersecurity Advisory IRGC-Affiliated Cyber Actors Exploit PLCs in Multiple Sectors, Including US Water and Wastewater Systems Facilities.

Ongoing Threat Actor Activity Against U.S.-Based Programmable Logic Controllers

The FBI observed Iranian-affiliated APT actors targeting internet-exposed PLCs with the intent to cause disruptions—including maliciously interacting with project files, and manipulating data displayed on HMI and SCADA displays—to U.S. critical infrastructure organizations. Iranian-affiliated APT targeting campaigns against U.S. critical infrastructure have recently escalated, likely in response to hostilities between Iran, and the United States and Israel.

(New, July 22, 2026) At one U.S. victim, the FBI observed the APT actors download a malicious project file to a targeted PLC using configuration software. Analysis indicated the project file retained ladder logic for downstream function but added logic that overrode specific instruction sets responsible for maintaining safe operating parameters in the victim’s environment.

Since at least March 2026, the authoring agencies identified (through engagements with victim organizations) an Iranian-affiliated APT group disrupted the function of PLCs. Organizations across several U.S. critical infrastructure sectors (including Government Services and Facilities, WWS, and Energy Sectors) deployed these PLCs within a wide variety of industrial automation processes. Some of the victims experienced operational disruption and financial loss.

Technical Details

Note: This advisory uses the MITRE ATT&CK^® Matrix for Enterprise framework, version 19. See the MITRE ATT&CK Tactics and Techniques section of this advisory for tables of the threat actors’ activity mapped to MITRE ATT&CK tactics and techniques.

Initial Access

(Updated, July 22, 2026) The authoring agencies observed Iranian-affiliated APT actors using several foreign-based IP addresses to access internet-facing PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, Siemens, and potentially other manufactured PLCs [T0883]. The actors used leased, third-party hosted infrastructure and manufacturers’ PLC programming software to connect to misconfigured victim PLCs. Inbound malicious traffic has been observed targeting PLC devices on the following ports: 44818, 2222, 102, and 502, as well as targeting modems on port 22. Targeted devices include:

• Rockwell Automation: CompactLogix and Micro850 PLCs
• Schneider Electric: BMX P34/Modicon M340 PLCs
• Siemens: S7-1200 series PLCs

Command and Control

(Updated, July 22, 2026) The targeting of ports [T0885] associated with other OT vendors’ protocols suggests these actors are opportunistically targeting devices manufactured by companies other than Rockwell Automation/Allen-Bradley, including Schneider Electric and Siemens. In one reported instance, the actors utilized Dropbear Secure Shell (SSH) software on victim modems to enable them to gain remote access through port 22 [T1219].

Exfiltration

(New, July 22, 2026) The authoring agencies observed Iranian-affiliated APT actors using configuration software—such as Rockwell Automation’s Studio 5000 Logix Designer, Schneider Electric’s EcoStruxure Control Expert, and Siemens’ Totally Integrated Automation (TIA) Portal—on leased, third-party hosted infrastructure to exfiltrate device project files from PLC devices to threat-actor-controlled infrastructure [T1041].

Impact

(Updated, July 22, 2026) After the actors extracted device project files, the FBI and CISA identified the modification and deletion of project file logic, to include Add-On Instructions (AOIs) and data manipulation on HMI and SCADA displays [T1565]. Additionally, the changes disabled critical shutdown and alarm logic, allowing systems to enter unsafe conditions without notifying operators of the anomalies.

Note: An AOI is analogous to a “Function Block” or “User Defined Function Block” used in other PLC vendor programs.

Indicators of Compromise

See Table 1 and Table 2 for recent IP addresses used by the Iranian-affiliated APT actors to communicate with PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, and Siemens in the United States.

Disclaimer: The FBI observed the threat actors using the IP addresses listed below in the specified time frames. This data is being provided for customers to query against logs for indications of historical targeting by the Iranian-affiliated APT actors. The authoring agencies recommend organizations investigate or vet these IP addresses prior to taking action, such as blocking.

MITRE ATT&CK Tactics and Techniques

See Table 3 to Table 6 for all referenced threat actor tactics and techniques in this advisory. The authoring agencies recommend organizations review historical TTPs for similar Iranian-affiliated cyber actor activity in IRGC-Affiliated Cyber Actors Exploit PLCs in Multiple Sectors, Including US Water and Wastewater Systems Facilities. For assistance with mapping malicious cyber activity to the MITRE ATT&CK framework, see CISA and MITRE ATT&CK’s Best Practices for MITRE ATT&CK Mapping and CISA’s Decider Tool.

Mitigations

The authoring agencies recommend organizations implement the mitigations below to improve your organization’s cybersecurity posture on the basis of the threat actors’ activity. These mitigations align with the Cross-Sector Cybersecurity Performance Goals (CPGs) developed by CISA and the National Institute of Standards and Technology (NIST). The CPGs provide a minimum set of practices and protections that CISA and NIST recommend all organizations implement. CISA and NIST based the CPGs on existing cybersecurity frameworks and guidance to protect against the most common and impactful threats and TTPs. Visit CISA’s CPGs webpage for more information on the CPGs, including additional recommended baseline protections.

Network Defenders

The cyber threat actors accessed PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, Siemens, and potentially other branded/manufactured PLCs to cause disruptions to victim systems. To safeguard against this threat and threats to other types of PLCs, the authoring agencies urge organizations to consider the following mitigations.

(Updated, July 22, 2026) In addition to contacting the authoring agencies, organizations and integrators operating PLCs from the manufacturers mentioned in this advisory should review the previously issued guidance to strengthen the security of their OT deployments:

• Rockwell Automation: Contact the Rockwell Automation Product Security Incident Response Team (PSIRT) at PSIRT@rockwellautomation.com for questions regarding this guidance, or to report cyber incidents related to Rockwell Automation products.
  
  • Refer to Rockwell Automation Security Advisory SD1771 for recommended PLC hardening measures and configuration guidance.
• Schneider Electric: Contact the Schneider Electric Corporate Product Cyber Emergency Response Team (CPCERT) at cpcert@se.com for questions regarding this guidance, or to report cyber incidents related to Schneider Electric products.
  
  • Refer to Schneider Electric’s Recommended Cybersecurity Best Practices and Cybersecurity User Guide for Modicon Controller Platform for guidance on securing and configuring PLCs.
• Siemens: Contact Siemens ProductCERT at productcert@siemens.com for questions regarding this guidance, or to report cyber incidents and vulnerabilities related to Siemens products.
  
  • Refer to Siemens Security Bulletin 104599 for a list of security measures to harden PLCs and in-depth configuration guides.
  • Siemens users should review the Cybersecurity for Industry Operational Guidelines and implement defense-in-depth controls within their automation systems.

Immediate steps to prevent the attack:

• Disconnect the PLC from the public-facing internet [CPG 3.S]. Follow the joint guidance Secure connectivity principles for OT to safely allow remote access. Specifically, “remove inbound port exposure,” so the OT system is never directly exposed to the internet or external networks, and to ensure all access is mediated, monitored, and controlled. Do this through a secure gateway (jump host) that brokers the connection.
  
  • Ensure cellular modems, used for remote field connectivity and access, are secured with strong authentication and updated.
  • Enable logs for connected modems and regularly review for suspicious activity to detect intrusions and improve incident response speed.
  • (New, July 22, 2026) To mitigate unauthorized access to OT via cellular modems, organizations should consider implementing isolated architectures, such as private Access Point Name (APN), 5G Public Network Integrated Non-Public Network (PNI-NPN), cellular Software-Defined Wide Area Network (SD-WAN), Zero Trust Network Access (ZTNA), or a site-to-site virtual private network (VPN).
• (New, July 22, 2026) Strictly control network access to PLC devices.
  
  • Configure firewall rules or access control list (ACL) security features on PLCs or programmable controllers to allow only authorized communications between expected control system devices. Block access from unauthorized or threat actor-controlled IP addresses, such as those associated with hosting providers.
• For controllers with a physical mode switch, place the physical mode switch into run position to prevent remote modification. Devices should only be in the program or remote position when updating or downloading software online and immediately switched back to the run position when complete. (See Rockwell Automation’s² System Security Design Guidelines for manufacturer’s instructions.)
  
  • (New, July 22, 2026) Prior to switching the device to run mode, review and validate project files, as changing modes will lock in the current project file downloaded to the device.
• For devices that allow software key switching, enable programming protection in PLC configuration software (S7 TIA Portal) to limit who can modify PLCs remotely. (See Siemens’ Cybersecurity for Industry Operational Guidelines for the manufacturer’s instructions.)

Follow-up steps to strengthen security posture:

• (New, July 22, 2026) Review project files running on PLCs for unauthorized changes. Use vendor-provided integrity checking tools and visually compare the running program to known good logic. Ensure reusable logic and input/output configurations are valid. For Rockwell Automation PLCs listed in the Customer Guidance to Disconnect Devices from the Internet, check the AOIs for any anomalous modifications.
  
  • If restoring from backups, verify the backup does not contain malicious logic before deployment.
  • Review logs and configurations on all connected devices, including modems, HMIs, and workstations, to assess potential lateral movement by threat actors. If it appears the actors connected to additional devices, reimage these devices to remove any potential malicious changes or access tools.
• (New, July 22, 2026) Ensure device passwords are changed from their default and are configured to use complex, unique combinations of letters, numbers, and symbols that are not easily guessable. Implementing robust password practices remains a critical security measure that can help prevent unauthorized access and strengthen the overall security posture of OT devices.
• (New, July 22, 2026) Take defensive measures to minimize the risk of exploitation. Conduct comprehensive impact analysis and risk assessments prior to deploying defensive measures.
• Create and test strong backups of the logic and configurations of PLCs. Store backup files offline and secure the physical removal media to enable fast recovery.
• Implement multifactor authentication (MFA) [CPG 3.F] for access to the OT network from an external network.
• If remote access is required, implement a network proxy, gateway, firewall, and/or VPN in front of the PLC to control network access.
  
  • A VPN or gateway device can enable MFA for remote access even if the PLC does not support MFA. Implement security rules on these higher-level network security mechanisms to prevent the type of repeated and sustained login attempts seen during a brute force attack. When possible, implement a device control list for workstations sending messages or connecting to OT components.
  • Use the device control list to monitor for logon activity for unexpected or unusual access to devices from the internet.
• Keep PLC devices updated with the latest software patches issued by the manufacturer. Use established downtime windows to install patches. Known Exploited Vulnerabilities may need to be prioritized outside a downtime window.
• Configure external and internal firewalls to block traffic using common ports associated with network protocols that are unnecessary for the particular network segment.
• Disable any unused authentication methods, logic, or features, such as default authentication keys and passwords, as well as unused or needed services such as Teletype Network (Telnet), File Transfer Protocol (FTP), Remote Desktop Protocol (RDP), Virtual Network Computing (VNC), and web services.
• Monitor asset management systems for device configuration changes, which can be used to understand expected parameter settings.
• Monitor the content of network traffic for the following:
  
  • Unusual logins to internet-connected devices or unexpected protocols to/from the internet. 
  • Functions of industrial control systems management protocols that change an asset’s operating mode or modify programs.
• (New, July 22, 2026) Ensure service providers are informed of active threats targeting internet-connected PLC devices. Owners and operators should communicate directly with service providers to address risks, especially when remote monitoring or maintenance is involved. Some service providers may rely on internet connectivity essential to monitor and maintain OT/ICS operations but may not be fully aware of active threats.

In addition, the authoring agencies recommend network defenders apply the following mitigations to limit potential adversarial use of common system and network discovery techniques, as well as reduce the impact and risk of compromise by cyber threat actors:

• Reduce risk exposure. CISA offers a range of services at no cost, including scanning and testing, to help organizations reduce exposure to threats via mitigating attack vectors. CISA’s Cyber Hygiene Services can help provide additional review of organizations’ internet-accessible assets. 

Device Manufacturers

Note: The following guidance is general in nature and not specific to any OT vendor. Some of the features, settings, and practices may already be offered by certain vendors. The inclusion of this guidance should not be interpreted as an assertion that vendors referenced do not offer such security features. Also, this advisory is not highlighting a new vulnerability in the identified products, but instead discusses opportunistic targeting. Device manufacturers can make opportunistic attacks more difficult at scale by encouraging more secure behavior by default and in operations, as discussed below. 

Although critical infrastructure organizations using PLC devices can take steps to mitigate the risks, it is ultimately the responsibility of the device manufacturer to build products secured by design and default. The authoring agencies urge device manufacturers to take ownership of their customers’ security outcomes by following the principles in the joint guide Secure by Demand: Priority Considerations for OT Owners and Operators when Selecting Digital Products, primarily:

• Change the manufacturers’ default settings to prevent exposing administrative interfaces to the internet.
• Do not charge additional fees for basic security features needed to operate the product securely.
• Support MFA, including via phishing-resistant methods.

By using secure by design tactics, software manufacturers can make product lines secure “out of the box” without requiring customers to spend additional resources making configuration changes, purchasing tiered security software and logs, monitoring, and making routine updates.

For more information on common misconfigurations and guidance on reducing their prevalence, see joint advisory NSA and CISA Red and Blue Teams Share Top Ten Cybersecurity Misconfigurations. For more information on secure by design, see CISA’s Secure by Design webpage and joint guide.

Validate Security Controls

In addition to applying mitigations, the authoring agencies recommend exercising, testing, and validating your organization's security program against the threat behaviors mapped to the MITRE ATT&CK for Enterprise framework in this advisory. The authoring agencies recommend testing your existing security controls inventory to assess how they perform against the ATT&CK techniques described in this advisory.

To get started:

1. Select an ATT&CK technique described in this advisory (see Table 3 to Table 6).
2. Align your security technologies against the technique.
3. Test your technologies against the technique.
4. Analyze your detection and prevention technologies’ performance.
5. Repeat the process for all security technologies to obtain a set of comprehensive performance data.
6. Tune your security program, including people, processes, and technologies, based on the data generated by this process.

The authoring agencies recommend continually testing your security program, at scale, in a production environment to ensure optimal performance against the ATT&CK techniques identified in this advisory.

Resources

• Authoring Agencies: IRGC-Affiliated Cyber Actors Exploit PLCs in Multiple Sectors, Including US Water and Wastewater Systems Facilities
• CISA: Bulletproof Defense: Mitigating Risks From Bulletproof Hosting Providers
• EPA: Cybersecurity for the Water Sector
• CISA: Water and Wastewater Cybersecurity
• CISA: Exploitation of Unitronics PLCs used in Water and Wastewater Systems
• CISA: Iran Threat Overview and Advisories
• FBI: The Iran Threat and Cyber Threat Overview: Iran
• CISA, MITRE: Best Practices for MITRE ATT&CK Mapping
• CISA: Decider Tool
• CISA: Cross-Sector Cybersecurity Performance Goals 2.0
• CISA: No-Cost Cybersecurity Services and Tools
• CISA: Secure by Demand: Priority Considerations for OT Owners and Operators when Selecting Digital Products
• NSA, CISA: NSA and CISA Red and Blue Teams Share Top Ten Cybersecurity Misconfigurations
• CISA: Secure by Design
• FBI, CISA: Primary Mitigations to Reduce Cyber Threats to Operational Technology
• United Kingdom National Cyber Security Centre: Secure connectivity principles for operational technology

Contact Information

U.S. organizations are encouraged to report suspicious or criminal activity related to information in this advisory to CISA, the FBI, and/or NSA:

• Contact CISA via CISA’s 24/7 Operations Center at contact@cisa.dhs.gov or 1-844-Say-CISA (1-844-729-2472). File a claim with FBI’s Internet Crime Complaint Center (IC3) or contact your local FBI field office. When available, please include the following information regarding the incident: 
  • Date, time, and location of the incident;
  • Type of activity;
  • Number of people affected;
  • Type of equipment used for the activity; and
  • Name of the submitting company or organization, and a designated point of contact.
• For NSA cybersecurity guidance inquiries, contact CybersecurityReports@nsa.gov.
• Entities required to report incidents to DOE should follow established reporting requirements, as appropriate. For other energy sector inquiries, contact EnergySRMA@hq.doe.gov.
• Contact the Rockwell Automation PSIRT for questions regarding their guidance or for reporting cyber incidents related to Rockwell Automation products at PSIRT@rockwellautomation.com.
• Contact the Schneider Electric CPCERT at cpcert@se.com for questions regarding this guidance, or to report cyber incidents related to Schneider Electric products.
• Contact Siemens ProductCERT for up-to-date information about the security of Siemens products or to report cybersecurity vulnerabilities at productcert@siemens.com. For support with increasing the security of installed Siemens PLCs, contact Siemens Industrial Cybersecurity Services at services.automation@siemens.com. See Siemens ProductCERT and Siemens CERT for more information.

Disclaimer

The information in this report is being provided “as is” for informational purposes only. CISA and the authoring agencies do not endorse any commercial entity, product, company, or service, including any entities, products, or services linked within this document. Any reference to specific commercial entities, products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply endorsement, recommendation, or favoring by CISA and the authoring agencies.

Version History

April 7, 2026: Initial version.

July 22, 2026: Update includes new guidance on detecting malicious activity, expanded scope of observed targeting, and best practices for secure PLCs deployment.

Notes

¹Project file refers to the software file that contains ladder logic and configuration settings. On Rockwell Automation devices, it is referred to as an .ACD file.

² See CompactLogix 5370 Controllers (Chapter 5: “Select the Operating Mode of the Controller”) for more information on functions available for the switch.

A few years ago we deployed Matrix with docker-compose. Now, let's give it a go on Kubernetes!

00:00 Introduction
01:40 Kubernetes Makes Things Simple
04:59 Getting Started
06:21 Installing Kubernetes
14:41 Deploying and Removing a Wordpress
20:53 Deploying A Matrix Stack
31:02 More Services Almost For Free

This Week in Matrix: https://matrix.org/twim

Find Matrix.org on the internet:
🐘 https://mastodon.matrix.org/@matrix
🤝 https://www.linkedin.com/company/matrix-org
🦋 https://bsky.app/profile/matrix.org
[m] Office of the Matrix Foundation https://matrix.to/#/%23foundation-office:matrix.org

The post Datalab’s Marker 2 vs MinerU, Docling and LiteParse: 76.0 on olmOCR-bench at 5× MinerU’s Throughput appeared first on MarkTechPost.

This article The Ultimate Admin Guide to Deploying Microsoft Scout via Intune first appeared on TheWindowsClub.com.

The post Bing Images Vulnerability Lets Attackers Execute Remote Code on Microsoft Servers appeared first on Cyber Security News.

The post OpenAI pushes ChatGPT into patient health records appeared first on AI News.

The post Security Flaws Found in Every Script Generated by ChatGPT, Copilot, and Gemini appeared first on Cyber Security News.

The company announced that GPT-Live now powers the ChatGPT desktop application on macOS and Windows, integrating directly with agentic systems like Codex and ChatGPT Work (which are separate experiences available in the ChatGPT desktop app).

When OpenAI initially launched GPT-Live on July 8, 2026, it introduced a continuous audio model capable of listening and speaking simultaneously—eliminating rigid turn-taking while delegating complex reasoning to background models like GPT-5.5.

Today's release expands that conversational layer to technical tasks, enabling software engineers to orchestrate multi-threaded coding jobs, review pull requests, and debug applications using natural voice commands.

As such, it could usher in a new era of "hands free" software development and even live, in-person group coding parties for Codex's more than 5 million weekly active users. Codex, of course, is the name given to OpenAI's models and harness focused on coding, but which the company has this year expanded into a more general productivity platform. An OpenAI spokesperson told VentureBeat this is the first time voice activation has been included natively with Codex on the desktop.

OpenAI posted a promotional video showing some of its employees, Codex developer experience engineer Jason Liu and Codex technical staffer Guinness Chen, speaking to the same ChatGPT desktop app session in the same room, each issuing different instructions and conversing with the same model.

New capabilities unlocked

At its core, this integration relies on decoupling the real-time voice layer from the underlying execution engines.

While GPT-Live maintains fluid conversation—inserting natural verbal acknowledgments like "got it" without interrupting the user—it passes heavy computational workloads to background reasoning models.

On macOS, the desktop application incorporates "Appshots" and screen context features, allowing ChatGPT Voice to analyze the frontmost window alongside local files, codebase structures, and active plugins.

This architecture creates a pair-programming dynamic where developers talk through problems conversationally while agents execute tasks asynchronously.

Rather than manually stopping coding sessions to type detailed instructions or switch windows, developers direct the system hands-free.

The full-duplex engine dynamically decides when to speak, pause, or invoke tools, maintaining conversational state even as background agents process complex code modifications.

Directing coding and complex builds with your voice alone

The central operational capability in this update centers on multi-task execution across Codex and ChatGPT Work environments.

Software engineers can initiate multiple concurrent task threads from a single spoken prompt. For instance, a developer preparing to ship a feature can instruct the system to investigate an open authentication bug, review a pending API migration pull request, and generate missing unit tests simultaneously.

The desktop application coordinates these actions across disparate contexts, tracing issues through Slack conversations, GitHub repositories, and local codebases.

Developers can also verbally convert design mockups into working code, splitting tasks across frontend, backend, and testing layers.

With support for multi-folder projects (build 26.715) and remote execution via iOS, engineers can check task progress, answer agent prompts, and redirect active jobs without switching applications or managing individual processes line by line.

Proprietary license

OpenAI’s voice-enabled desktop release operates under a proprietary, commercial enterprise model. Access is restricted to paid subscribers across Plus, Pro, Business, Enterprise, and Education plans.

For individual developers and corporate engineering departments, this commercial structure means the model weights, voice processing pipelines, and agent state architectures remain fully closed.

Organizations cannot modify or self-host the underlying systems. Furthermore, tasks initiated via ChatGPT Voice consume standard usage allocations directly from existing Codex and ChatGPT Work plan quotas, treating voice-triggered actions identically to standard agentic workloads.

Community reactions

Developer communities immediately noted the implications of bringing continuous full-duplex voice to autonomous coding workflows.

Reacting to the build 26.715 release announcement—which details voice integration and multi-folder project support—AI Insider journalist @ChrisGPT noted on X: "Today OpenAI will release voice and remote guidance for codex ! One step closer to personal AGI".

Early technical feedback highlights widespread enthusiasm for orchestrating complex agentic tasks hands-free, particularly when stepping away from the workstation or managing build pipelines remotely.

Summary

Successful exploitation of this vulnerability could allow an authenticated attacker to write arbitrary files to restricted system directories outside of the application's intended directory.

The following versions of Rockwell Automation ThinManager are affected:

• ThinManager >=13.0.0|<13.0.7, >=13.1.0|<13.1.5, >=13.2.0|<13.2.4, >=14.0.0|<14.0.2

Background

• Critical Infrastructure Sectors: Chemical, Critical Manufacturing, Energy, Food and Agriculture, Water and Wastewater
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: United States

Vulnerabilities

Acknowledgments

• Rockwell Automation reported this vulnerability to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability.

Minimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.

Locate control system networks and remote devices behind firewalls and isolating them from business networks.

When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

CISA also recommends users take the following measures to protect themselves from social engineering attacks:

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

No known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-14

Legal Notice and Terms of Use

Summary

Successful exploitation of these vulnerabilities could allow an attacker with network access to achieve remote code execution.

The following versions of Johnson Controls C-CURE 9000 and Victor application server are affected:

• C-CURE 9000 and victor <=v2.90_v3.0 
• victor Web <=v7.1 

Background

• Critical Infrastructure Sectors: Critical Manufacturing
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Ireland

Vulnerabilities

Acknowledgments

• Harrison Neal reported these vulnerabilities to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities. CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

CISA also recommends users take the following measures to protect themselves from social engineering attacks:

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

No known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-23

Legal Notice and Terms of Use

Summary

Successful exploitation of this vulnerability could result in an attacker obtaining confidential information from the device.

The following versions of Johnson Controls XAAP Android are affected:

• XAAP Android <1.53

Background

• Critical Infrastructure Sectors: Critical Manufacturing
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Ireland

Vulnerabilities

Acknowledgments

• Johnson Controls reported this vulnerability to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability.

Minimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.

Locate control system networks and remote devices behind firewalls and isolating them from business networks.

When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

No known public exploitation specifically targeting this vulnerability has been reported to CISA at this time. This vulnerability is not exploitable remotely.

Revision History

• Initial Release Date: 2026-07-23

Legal Notice and Terms of Use

Summary

Successful exploitation of these vulnerabilities could allow an unauthenticated network-adjacent attacker to crash critical IEC 61850 services or execute arbitrary code, disrupting or compromising protection, visibility, and control functions.

The following versions of MZ Automation libIEC61850 are affected:

• libIEC61850 >=v1.0.0|<=v1.6.1 

Background

• Critical Infrastructure Sectors: Critical Manufacturing, Energy, Transportation Systems
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Germany

Vulnerabilities

Acknowledgments

• Abhinav Agarwal reported these vulnerabilities to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities.

Minimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.

Locate control system networks and remote devices behind firewalls and isolating them from business networks.

When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

CISA also recommends users take the following measures to protect themselves from social engineering attacks:

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

No known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-23

Legal Notice and Terms of Use

Summary

Successful exploitation of this vulnerability could cause the parsing process to crash, which will cause a denial of service.

The following versions of MZ Automation lib60870 are affected:

• lib60870 <=2.4.0

Background

• Critical Infrastructure Sectors: Chemical, Energy, Water and Wastewater
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Germany

Vulnerabilities

Acknowledgments

• Lars Tray reported this vulnerability to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of this (these) vulnerability(ies).

Minimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.

Locate control system networks and remote devices behind firewalls and isolating them from business networks.

When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

CISA also recommends users take the following measures to protect themselves from social engineering attacks:

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

No known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-23

Legal Notice and Terms of Use

Summary

Successful exploitation of these vulnerabilities could allow an attacker with access to the IT network to manipulate industrial control devices without requiring physical access, specialized insider knowledge, or advanced tooling.

The following versions of Panduit IntraVUE are affected:

• IntraVUE <=3.2.1a14 

Background

• Critical Infrastructure Sectors: Critical Manufacturing, Energy, Information Technology, Water and Wastewater
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Netherlands

Vulnerabilities

Acknowledgments

• Phlebas of Lumintel reported these vulnerabilities to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities.

Minimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.

Locate control system networks and remote devices behind firewalls and isolating them from business networks.

When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

CISA also recommends users take the following measures to protect themselves from social engineering attacks:

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

No known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-23

Legal Notice and Terms of Use

Summary

Successful exploitation of these vulnerabilities could allow a non-privileged user to escalate privileges or view the credentials of other users.

The following versions of Weintek cMT3092X are affected:

• cMT3092X firmware <20210218 
• EasyWeb <v2.1.20

Background

• Critical Infrastructure Sectors: Critical Manufacturing
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Taiwan

Vulnerabilities

Acknowledgments

• Vincenzo Giuseppe Colacino of Secoore reported these vulnerabilities to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take the following measures to protect themselves from social engineering attacks:

Practice principles of least privilege.

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

No known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-23

Legal Notice and Terms of Use

This wave of VentureBeat Pulse Research examines how technical leaders measure agent performance: which reliability and evaluation platforms they use, how they select and trust them, what breaks in production, and how far they are willing to let agents run without a human in the loop.

The central finding is an evaluation gap — the distance between the autonomy enterprises are granting their agents and the trust they place in the evaluations meant to govern it. Half of organizations (50%) have, in the past year, deployed an agent or LLM feature that passed their internal evaluations and then caused a customer-facing failure, and a quarter have seen it happen more than once. Trust in the tests themselves is thin: only 5% say they fully trust automated evaluation today, and the single most-cited limitation is that evaluations align poorly with real-world outcomes (29%). Enterprises are discovering that a passing eval is not the same as a working agent.

What makes the gap consequential is the direction of travel. Two-thirds of organizations (66%) already permit fully automated, zero-human-in-the-loop deployment for low-risk agents (34%) or are actively engineering their pipelines to allow it within twelve months (33%). At the same time, the evaluation stack that would have to earn that trust is fragmented and immature: the most common primary tools are the model providers’ native evals, tied with having no dedicated tooling at all (17% each); and only about a quarter of enterprises run real-time quality checks on live production traffic. The autonomy is arriving faster than the assurance.

Methodology

VentureBeat fielded this survey as part of its ongoing Pulse Research series, this survey — the Agentic Reliability & Evals tracker — focused on how technical leaders evaluate agent performance and reliability. Responses are filtered to organizations with 100 or more employees (n=157), drawn from a single survey in June 2026; because this is one wave rather than a pooled multi-month sample, the report reads cross-sectionally and does not infer month-over-month trends. Where questions were multiple-select, those shares can sum to more than 100%.

By role the sample is senior and buyer-credible: 38% are final decision-makers for AI purchases and another 34% recommenders or influencers. Product and program managers (15%), consultants and advisors (10%), directors of engineering/IT (8%), and CIOs/CTOs/CISOs (8%) lead the named titles, alongside a large “Other” function (37%). By organization size the sample is mid-market-weighted: 100–499 (37%) and 500–2,499 (27%) employees lead, with 2,500–9,999 (20%), 10,000–49,999 (10%), and 50,000+ (6%) above them. Technology/Software is the largest industry at 23%, followed by Retail/Consumer (15%), Healthcare/Life Sciences (12%), and Manufacturing (10%).

At 157 respondents the sample is large enough to read directionally but should be treated as a directional signal rather than a precise measurement; it is self-selected and is not a probability sample. It skews toward the mid-market, so it is best read as the view from organizations actively standing up agent evaluation practices rather than from the largest operators.

Note: This survey was rebuilt for the June wave from the earlier “LLM observability and evaluations” survey; because the questions and sample differ, no comparisons are made to the April–May data.

Finding 1: A passing eval is not a working agent

Half have shipped an agent that passed evals, then failed a customer

We asked whether, in the past 12 months, organizations had deployed an agent or LLM feature that passed their internal evaluations but then caused a customer-facing failure. Half of those that run evaluations had.

This is the report’s defining number. Half of organizations (50%) have shipped an AI feature that cleared their internal evaluations and then failed in front of a customer — an incorrect output, a broken workflow, or a quality incident — and a quarter have seen it happen more than once. Only 36% report no such failure, and the remainder either run no pre-deployment evaluations (8%) or don’t track the root cause closely enough to know (6%). The failure is precise and expensive: the evaluation said the agent was ready, and it was not. Everything that follows — how enterprises trust their evals, what they monitor, and how much autonomy they grant — is shaped by this experience.

Finding 2: Almost no one fully trusts automated evaluation

The top complaint: Evals don't match real-world outcomes

We asked which limitation most reduces trust in automated agent evaluations today. Only a sliver of enterprises had no complaint at all.

Trust in automated evaluation is scarce, and specific. Only 5% of organizations say they fully trust automated evaluation as it stands — meaning 95% name a limitation that holds them back. The most common, at 29%, is the one that most directly explains Finding 1: evaluations align poorly with real-world outcomes, passing agents that later fail. Bias or inconsistency (21%) and a lack of explainability (18%) follow — enterprises cannot always tell why an evaluation reached its verdict — and 17% cite data-leakage or privacy concerns in the evaluation process itself. The tests meant to certify agents are not yet trusted to certify them, which is precisely why the autonomy trajectory in Finding 3 is so striking.

Finding 3: The autonomy ceiling is rising anyway

Two-thirds already allow, or are building toward, zero-human deployment

We asked whether organizations would let an autonomous agent deploy a code or system change to production on automated evaluation results alone, with no human-in-the-loop validation. The trajectory runs straight through the trust gap.

Here is the paradox at the heart of the report. Even though almost no one fully trusts automated evaluation (Finding 2), two-thirds of organizations (66%) either already allow zero-human-in-the-loop deployment for low-risk agents (34%) or are actively engineering their pipelines to permit it within a year (33%). Only 22% rule it out for the foreseeable future. The direction is unambiguous: enterprises are moving to let evaluations gate production autonomously — removing the human check — at the same moment they say those evaluations don’t reliably match reality. The autonomy ceiling is rising faster than the assurance beneath it, which is the mechanism by which the false-confidence failures of Finding 1 will scale rather than shrink.

Notably, the autonomy bet is not just a small company phenomenon. Splitting the sample by company size, larger enterprises are slightly further down the path toward zero human review than smaller companies (70% versus 64%) and slightly more likely to have shipped an evaluation-passing agent that then failed a customer (54% versus 48%). The assumption that large, regulated organizations are holding the human in the loop longest is, in this sample, backwards.  To be sure, these are directional figures, since the survey was not a huge sample — 57 respondents from companies with 2,500+ employees and 100 from companies smaller than that. 

Finding 4: The evaluation stack is fragmented and provider-led

Provider-native evals lead — tied with no dedicated tool at all

We asked which agent reliability or evaluation platform enterprises primarily use today. The market has no clear leader — and a large share has nothing dedicated.

The evaluation layer is early and unconsolidated. Provider-native tooling leads — OpenAI’s native evals and traces (17%) and Anthropic’s Claude Console evals (13%) together outweigh any independent platform — but it is tied at the top by a striking answer: 17% of enterprises use no dedicated agent-evaluation tooling at all, a notable gap for organizations shipping agents to customers. The specialist evaluation vendors — DeepEval (12%), Braintrust (8%), LangSmith, Weave, Promptfoo, Langfuse, Arize — are scattered across single to low double digits, and 11% have built their own. No independent platform has yet become the category standard, which leaves most enterprises evaluating agents with provider-native tools, home-grown scripts, or nothing.

Finding 5: Production monitoring rarely watches output quality

Only a quarter run real-time quality checks on live traffic

Production monitoring for an AI agent can watch two very different things. It can watch whether the system is functioning — is the agent up and responding, did each request complete, how fast, at what cost, with any errors. Or it can watch whether the agent's output is correct — automated checks that evaluate the content of each answer as it goes out: did the agent give the right answer, take the right action, stay within policy. The distinction matters because a confidently wrong answer is invisible to the first kind of monitoring: the request completes, the response is fast, no error is thrown, and every functioning-metric reads healthy. We asked organizations which kind their live production monitoring is built for today.

Grouped by what is actually being watched, the split is stark: 51% of organizations monitor only whether the agent is functioning, while 23% monitor whether its answers are right. Counting the ad-hoc reviewers and the don't-knows, roughly three-quarters of organizations run no automated, real-time evaluation of output correctness in production — they can see that the system is up and what it costs, and they are taking the correctness of its answers on faith. That blind spot is the runtime counterpart to the pre-deployment gap in Finding 1: the same organizations engineering the human out of the deployment decision mostly cannot see, in real time, when the deployed agent starts getting things wrong.

Finding 6: Bought on cost, measured on consistency

Price and integration drive selection; evaluation consistency is the goal

We asked what most influenced enterprises’ choice of an evaluation vendor, and what they treat as their primary measure of success. Both answers are pragmatic.

Enterprises buy evaluation tooling on economics and trust it on repeatability. Cost of evaluations (28%) narrowly leads selection, just ahead of ease of integration (27%) and evaluation accuracy (24%) — breadth of observability (13%) and vendor roadmap (4%) matter far less. On what success looks like, more than a third (36%) name evaluation consistency — getting the same verdict on the same behavior every time — well ahead of speed of experimentation (19%), reduction in failures (18%), production visibility (13%), and compliance (11%). The emphasis on consistency is telling: before enterprises can trust an evaluation’s verdict, they need it to be stable — the very property whose absence (bias and inconsistency) ranked among the top trust limitations in Finding 2. Satisfaction with current tooling is only moderate, averaging 3.8 on a five-point scale across overall satisfaction, ease of implementation, and value for money.

Finding 7: The next dollar goes to humans and observability

Investment is flowing to oversight, not just automation

We asked which reliability and evaluation investment will grow most over the next year. The money is going toward watching agents more closely — including with people.

The second-largest planned investment — behind only production observability — is human review workflows, at 26%. Read against Finding 1, that is the report's quietest contradiction: at the same moment two-thirds of enterprises are engineering the human out of the deployment decision, more of them plan to grow spending on human reviewers (26%) than on the automated evaluation pipelines (16%) that would replace them. The zero-human trajectory and the human-review budget are rising in the same companies at the same time. Indeed, only 8% report that their budget is not increasing.

Taken together, enterprises are hedging: building toward autonomy while spending to watch agents more closely and keep humans available for the calls that automated evaluation cannot yet be trusted to make.

Finding 8: A tooling reshuffle is coming

Nearly two-thirds plan to adopt or switch platforms within a year

We asked whether enterprises plan to adopt a new, additional, or replacement evaluation platform, and which they are considering. Few intend to stand pat.

The evaluation market is wide open. While 36% have no plans to change, a clear majority (64%) intend to adopt a new, additional, or replacement platform within twelve months, and 31% within the next quarter. The consideration set points where current usage is thinnest: Confident AI’s DeepEval leads what enterprises are evaluating (20%), ahead of OpenAI’s native evals (13%) and Braintrust (9%) — the open-source specialists drawing more interest than their present footprint.

Given that so many enterprises today rely on provider-native tools or nothing at all (Finding 4), this is less a defection than a first real wave of tooling adoption — the moment the evaluation layer starts to consolidate. Which platforms earn that trust, in a market where almost no one trusts automated evaluation yet, is the open question this series will keep tracking.

The bottom line: An evaluation gap that autonomy will widen, not close

Organizations with 100 or more employees are granting AI agents more independence than they trust their evaluations to support. Half have already shipped an agent that passed its evals and then failed a customer; almost none fully trust automated evaluation, chiefly because it doesn’t match real-world outcomes; and most watch production for uptime and cost rather than for whether the agent’s answers are right. Yet two-thirds already allow, or are actively building toward, deploying to production on automated evaluation alone.

The vendor market is early and unsettled: the most common primary evaluation tools are provider-native evals, tied with no dedicated tooling at all, and a clear majority plan to adopt or switch platforms within the year. Encouragingly, the next dollar is going to observability and — pointedly — human review, suggesting enterprises sense the gap even as they engineer past it. At 157 respondents in a single wave this is a directional read, skewed toward the mid-market — but the direction is clear: autonomy is being granted on the strength of evaluations that the people granting it do not yet trust. The evaluation gap is not a coverage problem that more tests alone will close; it is a problem of evaluations that reflect reality and can be trusted to gate it. The open question for later waves is whether assurance catches up to autonomy — or whether the false-confidence failures move from customer incidents into changes that deploy themselves.

Based on survey responses from 157 qualified enterprise respondents (100+ employees), drawn from a single June 2026 wave. This is a directional read rather than a precise measurement — the sample is self-selected, not a probability sample, and skews toward the mid-market. Respondents include product and program managers, consultants and advisors, directors of engineering/IT, and CIOs/CTOs/CISOs, among other functions, across technology/software, retail/consumer, healthcare/life sciences, manufacturing, and other industries.

Executive summary 

A group of Russian state-supported cyber actors has been targeting and compromising various Western government and commercial organizations using the Zimbra Collaboration Suite (ZCS) software since at least July 2025. The Russian state-supported advanced persistent threat (APT) group’s activity is tracked in the cybersecurity community under several names (see Cybersecurity industry tracking), primarily as “LAUNDRY BEAR,” a name initially coined by the Netherlands General Intelligence and Security Service (AIVD) and Defence Intelligence and Security Service (MIVD) [1].

LAUNDRY BEAR’s targeting is almost certainly to gather sensitive information for the Russian Federation, with these actors primarily focusing on the covert acquisition of email data. Previous campaigns indicated LAUNDRY BEAR relied on unsophisticated initial access techniques—including password spraying, phishing, and pass-the-cookie—allowing the group to successfully run high-volume operations. The latest campaign targeting ZCS uses a novel exploit that was a zero-day vulnerability when first exploited and continues to be successfully exploited. The vulnerability, Common Vulnerabilities and Exposures (CVE) CVE-2025-66376, was patched in November 2025. This demonstrates LAUNDRY BEAR’s intent and ability to deploy increasingly sophisticated technical capabilities.

Unlike traditional phishing campaigns that persuade a user into taking an action, such as clicking a link or opening a file, LAUNDRY BEAR’s latest campaign leverages a view-based exploit that only requires a user to view a malicious email within a vulnerable version of the webmail service. Once viewed, the exploit attempts to exfiltrate the victim’s last 90 days of email communications, the organization email directory (i.e., Global Address List [GAL]), and other sensitive information to servers controlled by LAUNDRY BEAR. The exploit also attempts to establish persistent access to victim accounts through a variety of means as detailed in the Persistence and credential access section.

This Cybersecurity Advisory (CSA) warns of this ongoing malicious threat activity and urges organizations to update their vulnerable software and implement additional mitigations to thwart these Russian state-supported actors’ continued success. The CSA is being released by the following authoring and co-sealing agencies:

• United States National Security Agency (NSA)
• United States Federal Bureau of Investigation (FBI)
• Netherlands Defence Intelligence and Security Service (MIVD)
• Netherlands General Intelligence and Security Service (AIVD)
• United States Cybersecurity and Infrastructure Security Agency (CISA)
• United States Defense Counterintelligence and Security Agency (DCSA)
• United States Department of Defense Cyber Crime Center (DC3)
• United States Department of the Treasury
• United States Naval Criminal Investigative Service (NCIS)
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Communications Security Establishment Canada’s (CSE’s) Canadian Centre for Cyber Security (Cyber Centre)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• United Kingdom National Cyber Security Centre (NCSC-UK)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)¹
• Danish Defence Intelligence Service (DDIS)²
• Estonian Foreign Intelligence Service (EFIS)³
• Finnish Defence Intelligence (FDI)⁴
• Finnish Security and Intelligence Service (SUPO)⁵
• French General Directorate for Internal Security (DGSI)⁶
• French National Cybersecurity Agency (ANSSI)⁷
• Italian External Intelligence and Security Agency (AISE)⁸
• Italian Internal Intelligence and Security Agency (AISI)⁹
• Security and Intelligence Service of the Republic of Moldova (SIS RM)¹⁰
• Polish Foreign Intelligence Agency (AW)¹¹
• The Military Counterintelligence Service of Poland (SKW)¹²
• Spain National Intelligence Centre (CNI)¹³
• Sweden National Cyber Security Centre (NCSC-SE)¹⁴

The authoring agencies urge any organizations using ZCS to implement the recommendations listed within the Mitigations section of this advisory to reduce the risk associated with this activity. This CSA also includes specific remediations for organizations to implement if they discover the presence of the listed Indicators of compromise (IOCs).  

As more organizations update their ZCS software based on this CSA, LAUNDRY BEAR may discontinue the current campaign exploiting this vulnerability; however, based on the success of this and previous campaigns, it is very likely that the group will continue to target ZCS and other email systems used by organizations in Western countries. The actors will almost certainly continue to rely on email to engage potential victims by exploiting novel vulnerabilities and, when necessary, use social engineering techniques to assist with their efforts. The authoring agencies recommend organizations regularly update their mail service software and continuously monitor their email systems and emails for malicious activity.

For a downloadable list of IOCs, see:

• AA26-204A.stix.xml (STIX XML)
• AA26-204A.stix.json (STIX JSON)

Cybersecurity industry tracking

The cybersecurity industry provides overlapping cyber threat intelligence, indicators of compromise (IOCs), and mitigation recommendations related to these Russian state-supported cyber actors. While not exhaustive, the following are threat group names commonly used for these actors within the cybersecurity community:

• LAUNDRY BEAR
• Void Blizzard [2]
• CL-STA-1114 [3]
• TA488 (formerly UNK_PitStop) [4]

Note: Cybersecurity companies have different methods of tracking and attributing cyber actors, and this may not be a 1:1 correlation to the U.S. government’s understanding for all activity related to these groupings.

Background

Public advisories from Netherlands General Intelligence and Security Service (AIVD), Netherlands Defence Intelligence and Security Service (MIVD), and Microsoft highlighted these Russian state-supported advanced persistent threat (APT) actors in May 2025, calling them LAUNDRY BEAR and Void Blizzard respectively [1] [2]. Both advisories assessed that the group was engaged in malicious cyber activity as early as April 2024.  

The May 2025 advisories highlighted a cluster of activity targeting cloud-based email environments, including Microsoft Exchange in particular, and abusing legitimate APIs to perform data exfiltration in bulk [T1114.002]. The group relied on unsophisticated means of initial access, including procuring stolen credentials on criminal marketplaces [T1078], and using social engineering techniques to lure targets into interacting with a malicious site masquerading as a legitimate one. As of April 2025, one of these sites resembled a European Defence & Security Summit registration portal that required registrants to sign in to their Microsoft account to view. Once a user entered their Microsoft credentials into this malicious site, LAUNDRY BEAR’s modified version of the open source adversary emulation toolkit, Evilginx, intercepted the user’s credentials. LAUNDRY BEAR then used this authentication data, including passwords and session tokens, to access the compromised account and conduct mass email exfiltration, as well as harvest other information. This method of compromise is commonly known as an adversary-in-the-middle (AiTM) technique [T1557].  

Beginning around July 2025, LAUNDRY BEAR shifted toward a more technical method of email compromise, highlighting their continued efforts to covertly acquire email communications from a variety of Western organizations of interest and deliver them to the Russian Federation. Using a custom-developed capability [T1587.001] named “Улей” or “Ulej” (Russian for beehive), LAUNDRY BEAR successfully targeted and exfiltrated sensitive user information from organizations who use the Zimbra Collaboration Suite (ZCS) product [T1114]. Data LAUNDRY BEAR attempted to exfiltrate from compromised accounts included:

• Last 90 days of emails,
• Email address,
• Password [T1589.001],
• Global Address List (GAL) [T1087],
• Two-factor authentication (2FA) tokens, and
• Newly-created Application Passcode [T1098].

The covert and persistent nature of this activity, along with the absence of any known financial extortion, almost certainly indicates this group’s involvement in espionage activities with Russian government backing. Additionally, extensive Ukrainian targeting, prior to use against U.S. and other NATO allies, outlines an increasing trend within Russian cyber threat groups to target Ukrainian users first—both as a priority target and as a testbench for malicious cyber techniques before broader global deployment.

Targeting details

LAUNDRY BEAR has targeted and compromised users in various organizations, including those associated with:

• the Defense Industrial Base (DIB),  
• the federal and local government,
• education,
• energy,
• law enforcement,  
• media,  
• non-governmental organizations, and
• technology.

Technical details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise framework, version 19. This advisory also uses MITRE D3FEND^TM version 1.4.0¹⁵. See Appendix A and Appendix B for tables of the activity mapped to MITRE ATT&CK and D3FEND tactics, techniques, and countermeasures.

Ulej is a novel data exfiltration and aggregation capability, that currently (as of the publication of this report) supports a campaign specifically targeting users of ZCS webmail servers. This capability is used to exploit CVE-2025-66376 [Common Weakness Enumeration (CWE) CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')], but likely could be adapted to exploit other vulnerabilities. It exfiltrates emails and other sensitive user data from a victim’s system immediately after exploitation and stores the data in an actor-controlled unattributable virtual private server (VPS) [T1074.002] running LAUNDRY BEAR’s “Flowerbed” collection framework. The collected data is almost certainly further exfiltrated to internal network resources for review and long-term retention.

Reconnaissance

LAUNDRY BEAR uses the Ulej capability to exploit the CVE-2025-66376 vulnerability in organizations using ZCS. This campaign’s targeted victimology and limited exploitation capabilities likely indicate this group manually identifies and targets the victim organizations. LAUNDRY BEAR likely identifies organizations with public-facing Zimbra infrastructure by port scanning [T1595] and fingerprinting datasets easily procured through various commercial vendors [T1596.005].  

After identifying a target organization, the group likely compiles email addresses for individual users to target with the exploit [T1589.002] from datasets offered by commercial vendors [T1597.002], open source intelligence [T1593], or previously exfiltrated data [T1597].  

Resource development

The actors procure VPSs from a variety of providers [T1583.003], including those with Know Your Customer (KYC) requirements, and often use fabricated identities. LAUNDRY BEAR primarily uses Mullvad VPN [T1583] when interacting with these servers, further demonstrating the group’s intent to mask their identity and maintain operations security (OPSEC). After the server is provisioned, an automated process deploys the Docker containers necessary for Ulej’s Flowerbed framework [T1608], which then receives and aggregates the data Ulej exfiltrates. These servers are typically only used for 7-60 days before moving to new infrastructure.

Flowerbed framework

Flowerbed is a Python project that uses Docker for containerization. The project includes four different Docker containers:

• Catcher,
• Certbot,
• Nginx, and
• Gardener.

Catcher acts as both a DNS and HTTP server to receive and aggregate exfiltrated victim information [T1048]. For additional information on Catcher, refer to the Exfiltration section of this advisory. Flowerbed’s next container, Certbot, is based on one of the official Certbot containers, which allows for automated generation of Let’s Encrypt certificates using DNS challenges through Cloudflare. This certificate can then be used by the Nginx container, which serves as an HTTPS reverse proxy for Catcher, enabling Flowerbed to disguise some of its exfiltration activity through an encrypted communications channel [T1048.002]. The Nginx reverse proxy also validates that the Server Name Indicator (SNI) value contains “*.i.*” prior to forwarding the traffic to Catcher. If the SNI does not contain that string, the Nginx server returns a 444 error to the client. This is likely an attempt to reject non-Ulej connections. Finally, the Gardener container functions as a health check for the Catcher service. Gardener is a simple Python script that validates Catcher correctly receives and processes data.

The simplistic Flowerbed codebase has indications that artificial intelligence (AI) played a role in its development. This highlights how AI is increasingly being used to develop malicious capabilities [T1588.007]. The dependence on AI for a simple capability, such as Flowerbed, alongside a previous reliance on open source capabilities, such as Evilginx2 [T1588.002], likely indicates a lack of advanced technical knowledge within LAUNDRY BEAR, especially in relation to true software development capabilities.

Initial access

To gain initial access, LAUNDRY BEAR sends an email containing a malicious JavaScript payload to the target [T1566]. Through exploitation of CVE-2025-66376, this JavaScript payload is immediately executed once the user views the malicious email [T1203], such as the one shown in Figure 1, in the ZCS webmail platform. Since at least November 2025, LAUNDRY BEAR began sending these phishing emails from victim infrastructure through compromised accounts [T1199], as shown in the email metadata in Figure 2. These compromised accounts were likely previous victims of this, or another LAUNDRY BEAR, campaign and their use is intended to further obfuscate and frustrate anti-phishing tools and training.

According to the National Vulnerability Database (NVD), CVE-2025-66376 was initially published on 5 January 2026. This vulnerability allows for execution of a JavaScript payload included in email content due to improper sanitization of Cascading Style Sheet’s (CSS) @import directives within an email [5]. Because the activity attributed to this campaign began in July 2025—months before Synacor released a patch and the CVE was published—the payload initially exploited a zero-day vulnerability at that time [T1587.004].  

Utilization of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability.

Hidden in LAUNDRY BEAR’s email is a Base64 encoded payload within the “onload” field of a Scalable Vector Graphics (SVG) element [T1027.017], as shown in Figure 3. Leading up to the inclusion of this payload in the SVG element are various instances of @import directives, as required to leverage CVE-2025-66376. This payload includes an XOR encrypted final script encoded in a Base64 inner payload (see Figure 3) [T1027.013]. The outer payload decodes and decrypts the inner payload using an XOR function and a hardcoded key and then executes the script contained within the inner payload containing the collection and exfiltration logic. By changing the key used for the XOR encryption of the inner payload or adding additional @import directives with non-functional code [T1027.010], LAUNDRY BEAR can easily generate new payloads that bypass basic threat detection signatures. This malicious payload attempts to collect and exfiltrate information in 12 asynchronous stages [T1119]. The stages in order of appearance within the payload are as follows:

1. sendStartPing,
2. gather_email,
3. gather_environment,
4. gather_2fa_codes,
5. gather_app_password,
6. gather_device_status,
7. gather_oauth_consumers,
8. gather_autocomplete_password,
9. enable_mail_protocols,
10. gather_gal,
11. sendArchives, and
12. sendFinishPing. 

Use of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability [T1587].

Persistence and credential access

To establish sustained persistence into the victim’s email account, the script attempts to modify account preferences and collect authentication information. Any collected credentials are later exfiltrated, as further described in the Exfiltration section below. Other campaigns attributed to LAUNDRY BEAR also demonstrated the group’s ability to circumvent multi-factor authentication through session token replay [T1550.004], and the Zimbra campaign follows a similar trend.

The script used in this campaign tries to discover the victim’s email address during the gather_email stage [T1087]. The script searches for this email address in two ways. First, it examines the batchInfoResponse variable, which an HTML script element on the webpage can define, for an email address. Even if the script finds an email address there, it also checks whether it acquired a Cross-Site Request Forgery (CSRF) token as described later in the Collection section of this advisory. If so, the script uses the “GetIdentitiesRequest” Simple Object Access Protocol (SOAP) command under the “ZimbraAccount” namespace to determine the victim’s email address [T1185] and then exfiltrates it. However, if the script does not have a CSRF token or the SOAP request fails, the script exfiltrates the email value recovered from the first method instead. If both attempts fail to capture the victim’s email, the script sends a JavaScript Object Notation (JSON) payload with a key of “email” and value of null over HTTPS and does not attempt DNS exfiltration.

During the gather_autocomplete_password stage, the script attempts to collect the victim’s saved password via the autocomplete feature of the victim’s password manager. The script injects two HTML div elements requesting login credentials onto the page outside of the victim’s view, as shown in Figure 4 and Figure 5. After waiting five seconds, the script then attempts to extract the password provided automatically by the password manager from the input element shown in Figure 4. If there is no value in that input field, it checks the password input field shown in Figure 5. If neither input field contains a value, a JSON payload with a key of “autocomplete_password” and value of null is sent over HTTPS and DNS exfiltration is not attempted.

LAUNDRY BEAR almost certainly relies on a mail client using the Internet Message Access Protocol (IMAP) for persistent access to the victim’s mailbox. During the enable_mail_protocols stage, a SOAP request leveraging the “ModifyPrefsRequest” command under the “ZimbraAccount” namespace is sent. This request attempts to set the “zimbraPrefImapEnabled” preference to TRUE. While the default setting for “zimbraPrefImapEnabled” is not well documented, this action is almost certainly intended to ensure that IMAP access to the victim’s mailbox is enabled.

ZCS does not support 2FA for some mail clients, including IMAP. To support users who rely on IMAP clients, ZCS allows for the generation of Application Passcodes. Application Passcodes are randomly generated passwords that can be used for clients that cannot support the normal 2FA process to authenticate. During the gather_app_password stage, the script makes a SOAP request using the “CreateAppSpecificPasswordRequest” command under the “ZimbraAccount” namespace to create a new Application Passcode [T1556.006]. The SOAP request uses “ZimbraWeb” as the name of the application.

Additionally, the script also attempts to collect 2FA tokens. During the gather_2fa_codes stage, the script makes a SOAP request using the “GetScratchCodesRequest” command under the “ZimbraAccount” namespace. The script then attempts to exfiltrate any non-null 2FA codes collected this way. The number of codes can vary, and each code is exfiltrated to Flowerbed individually.

Collection

As demonstrated in the Persistence and credential access section, this script relies heavily on SOAP requests to collect victim information. To make these requests, the script aims to acquire the victim’s current CSRF token, which it attempts to access within the webpage’s local storage using localStorage.getItem("csrfToken"). If the script is unable to acquire this CSRF token, it will be unable to make any SOAP requests. In addition to the SOAP commands documented in the Persistence and credential access section, other SOAP commands executed to collect victim information are shown in Table 1.

The script attempts to collect the victim’s GAL through brute force by searching for each two-character combination from a character set of “abcdefghijklmnopqrstuvwxyz1234567890.-_”. These queries are conducted using 20 batches of SOAP requests with 77 “SearchGalRequest” SOAP commands in each batch except for the last request containing only 58.

During the gather_environment stage, the script attempts to determine which type of ZCS webmail client the victim is using. The script checks the user’s current URL to determine the client type being used, checking for certain indicators (shown in Table 2) to determine the client type. The corresponding value is then used as the payload when exfiltrating the client type.

As part of collection, the script attempts to harvest any emails not marked as “junk” from the last 90 days from the victim’s account. Emails are collected daily by an HTTP GET request to the URL path, “/home/~/?fmt=tgz&meta=0&query=date:-{DAY_OFFSET}d AND (not in:junk)”. The {DAY_OFFSET} value would be between 0 and 89 representing how many days ago the email was sent or received. To prevent redundant collection and exfiltration of emails, a variable with a name based on the email date being queried, using a format of zd_comp_YYYY-MM-DD, and value of true, is saved to the window.top.localStorage property. This variable is saved regardless of whether the email is successfully exfiltrated.  

According to Mozilla documentation, if the user is not in a private browsing session, any data stored to localStorage does not typically expire. This means that if the user happens to execute the script again from the same computer, the script avoids attempting to re-exfiltrate previously captured emails. However, the script always attempts to pull any emails with a {DAY_OFFSET} of zero. In other words, the script always pulls emails sent or received the same day it is run. After email results are returned from the query for each day of email activity, those results are then passed to Flowerbed as described in the Exfiltration section.

The script also provides LAUNDRY BEAR with telemetry on any errors that occur during the collection process. This is accomplished by executing any collection or exfiltration code through helper functions that contain error handling logic. If an error occurs, a payload containing information on the error itself, the context of the error happening, and the stage in which the error occurred is sent to Flowerbed as described in the Exfiltration section below. For cases where the error occurs within a SOAP request, “:api” is concatenated to the stage value in the payload. If an error occurs during the batch SOAP requests that occur when collecting the GAL of the victim, the stage value will use a format of gather_gal:{VAL}:api. The {VAL} placeholder indicates which batch request, a number from 0 to 19, the error occurred in. Errors that occur during the password autocomplete interception process will use “gather_autocomplete_password:dom” for the stage value. Finally, if an error occurs when attempting to collect or exfiltrate a specific day’s emails, the stage will include which day the error occurred on, using the previously defined placeholder {DAY_OFFSET}, with a format of sendArchive:day-{DAY_OFFSET}.

Exfiltration

At the end of each stage in the collection process, the script attempts to exfiltrate acquired information to Flowerbed. The script primarily relies on two forms of data exfiltration: DNS [T1048.003] and HTTPS. Some information is exfiltrated over both the DNS and HTTPS channels.

Prior to exfiltration, a randomized 10- or 11-character alphanumeric string is generated as an identifier for the victim. This identifier is included in the URL of both the DNS- and HTTPS-based exfiltration.  

DNS exfiltration

DNS exfiltration occurs through DNS A record queries. To ensure data exfiltrated through DNS is not corrupted when traversing through non-actor-controlled DNS infrastructure, Ulej maintains compliance with RFC 1035, Domain Names - Implementation and Specification, specifically accounting for the case insensitivity and subdomain length requirements. Base32 encoding is used to create a case-insensitive payload. Once the payload is encoded, a period (“.”) is added every 60 characters to ensure each subdomain is under 63 characters long. The script then creates a new image object sourced from a URL with the scheme defined in Figure 6. Any traffic involving DNS exfiltration will have “d-“ prefixing the victim identifier, and the subdomain immediately following indicates the type of information being exfiltrated.

When the script generates an image object, the browser tries to retrieve the complete domain of the URL specified as the source of the image. This triggers a DNS request sent to the actor-controlled server and processed by Flowerbed. Table 3 lists both the information exfiltrated via DNS and their corresponding data type identifiers in the DNS queries.  

HTTPS exfiltration

Any information exfiltrated via DNS is also exfiltrated through HTTPS, as well as additional data including email content, contacts, attachments, and error logging information. By using Let’s Encrypt certificates, this group can quickly deploy new infrastructure and leverage encrypted HTTPS communications with valid server certificates when exfiltrating information from the victim’s environment. The HTTPS exfiltration capability only uses two HTTP content types, defined in Table 4. Traffic associated with HTTPS exfiltration will use the URL scheme shown in Figure 7.  

Some of the data transmitted via HTTPS uses the standard JSON content type format. The script includes the information in a POST request to actor-controlled infrastructure.  

Table 5 provides a summary of the JSON-based exfiltration.

The script transmits all HTTPS exfiltration not identified in Table 5 using the Octet-Stream content type as binary data. The POST requests for this method include a filename in the “X-Filename” header. Traditionally, developers use headers prefixed with “X-” to denote custom headers that do not follow a defined standard. The purpose of including this header remains unclear since the Catcher capability ignores the provided filename when saving the data. Table 6 summarizes the data exfiltrated in this format.

The script sends all exfiltrated data identified in Table 6 to the Catcher service exactly as received from the SOAP request in a JSON payload, except for email exfiltration. For email exfiltration, the script sends it as a GZIP compressed archive [T1560]. Although most of the exfiltration consists of valid JSON, the script still attempts to exfiltrate all information identified in Table 6 using the application/octet-stream content typing rather than application/json.

At the beginning and end of the collection and exfiltration activity, during the sendStartPing and sendFinishPing stages respectively, the script submits a POST request with a JSON payload to indicate that the script is starting or finishing execution. Throughout execution, the script also logs error events and send the logs using similar JSON payloads. The script sends the JSON in a POST request to the URL documented in Figure 2, using a URL path of “/v/p” and with a “subtype” key that shows which type of action it logged (start, finish, or error).  

Catcher

Ulej exfiltrates information to Flowerbed to be handled by a service named Catcher. Catcher is a containerized Python application, running in Docker as part of Flowerbed, which is detailed in the Resource development section. It receives exfiltrated data and temporarily stores it, enabling its eventual transfer to infrastructure designed for long-term, secure storage.

Catcher acts as an HTTP server over port 8000 and a DNS server on port 53. As described in the Resource development section, the Flowerbed project uses an additional Docker container running an Nginx reverse proxy to enable HTTPS support. This reverse proxy uses a certificate generated by Let’s Encrypt and forwards all traffic with an SNI containing “*.i.*” to port 8000 within the Catcher container.

The DNS service can accept A, AAAA, MX, TXT, and CAA queries. For any MX, AAAA, or CAA queries, the server will always provide an empty response. The system only supports TXT records as needed to process Automatic Certificate Management Environment (ACME) requests, which enable the assignment of Let’s Encrypt certificates. If the server receives an A query, Catcher will always respond with the public IP address of the Flowerbed server.  

However, if a query includes a domain formatted as shown in Figure 6 and Figure 7, the service saves a log file in JSON format to disk containing the following details of the DNS query:

• Time of query,
• Source IP address for query,
• Queried domain, and
• Type of query.

The HTTP server typically responds with OK, except in cases where the path is “pixel.gif” when the response contains a 1x1 gif image with a SHA-256 hash of ef1955ae757c8b966c83248350331bd3a30f658ced11f387f8ebf05ab3368629. Like the DNS service, the HTTP service will only log entries when the domain found in the host header of the request follows the expected formatting as seen in Figure 6 and Figure 7. As the HTTPS exfiltration uses non-standardized binary and JSON-formatted payloads when exfiltrating to Catcher, Catcher will check the content type of the request. If the content type is set to “application/json”, Catcher encodes the data in Base64 and includes it in the JSON log entry written to disk. If the content type is set to any other value, Catcher leaves the Base64 payload in the JSON log entry blank and saves the payload to a separate file with the same filename as the JSON log entry with a “.bin” file extension. An HTTPS exfiltration event causes Catcher to save a JSON formatted log file to disk containing the following information from the HTTP request:

• Time,
• Source IP address,
• Request method,
• Host,
• Path,
• Query string,
• Headers, and
• Base64 payload.

These JSON event log files and binary output files are then initially saved to the directory /root/hits/tmp and later moved to the /root/hits/ready directory once processed. This prevents incomplete files, which are still being uploaded to Catcher, from premature exfiltration from the server. Approximately every 60 seconds, a likely automated workflow establishes a Secure Shell (SSH) connection with the server hosting Flowerbed for a few seconds, almost certainly exfiltrating the data processed by Catcher to non-public-facing infrastructure. The command in Figure 8 also executes hourly to remove all files last modified at least two days ago from the /root/hits/ready directory.

Response strategies

Mitigations

In many cases, by the time an organization identifies a compromise related to this campaign, numerous sensitive and proprietary emails have already been exfiltrated. The significant risk posed by this cyber threat emphasizes the importance for organizations that use ZCS and other similar webmail solutions to take proactive steps to mitigate this risk.

All organizations that use the ZCS webmail service should immediately prioritize ensuring that their ZCS is not running a vulnerable version. A patch for CVE-2025-66376 was released for both 10.1.13 and 10.0.18 versions of ZCS [D3-AH]. If immediate patching is not feasible, organizations should advise employees to use alternative mail clients to access email and avoid using the Classic ZCS webmail client until ZCS is updated to a non-vulnerable version [d3f:Isolate].

System administrators should closely monitor any Internet-connected ZCS or other email systems and the workstations that access those systems and promptly apply available software updates [D3-AH]. Administrators can maintain awareness of active vulnerability exploitation by referencing open source resources, including CISA’s Known Exploited Vulnerabilities Catalog and NCSC-UK’s Responding to active exploitation of vulnerabilities guidance.

Organizations should consider using a third-party authentication service that supports passkeys for authentication to mediate access to ZCS and other services that do not natively support passkeys. By doing so, organizations can work to eliminate the possibility of automated password collection from autocomplete or password reuse [D3-CH]. However, Application Passcodes may still be necessary and should be monitored closely.  

Organizations should implement network monitoring capabilities with collection and short-term retention of packet capture or NetFlow data and maintain log collection and storage [CPG 3.Q]. This will allow organizations to monitor for and identify suspicious network activity [CPG 4.B], such as:

• Significant amounts of outbound data being sent to IPs associated with VPS providers not used by the organization [D3-NTA];
• Frequent DNS queries for a suspicious domain with seemingly random subdomains [D3-DNSTA];
• A sudden spike of connections to a server associated with a recently established domain [D3-NTCD]; and  
• Connections to internal services, such as webmail, from VPN providers frequently leveraged by this group for nefarious activity, such as Mullvad VPN [D3-NTCD].

Additionally, for organizations that can inspect the content of outbound HTTPS connections via break-and-inspect infrastructure, security teams should identify traffic matching the characteristics described in the Exfiltration section of this advisory.

Indicators of compromise (IOCs)

Flowerbed infrastructure

The following indicators have been attributed to use by LAUNDRY BEAR for their campaign targeting ZCS’s webmail service as of the publication of this advisory. (Disclaimer: Due to the frequency of operational structure changes by this group, these indicators are intended solely for historic attribution purposes. Some indicators, such as IPs, compromised emails, and domains, may be outdated, so organizations should check for current activity before acting on these IOCs.) Table 7 provides details about the server infrastructure used to host Flowerbed, and Table 8 lists the corresponding SHA-1 hash values for the Let’s Encrypt certificates used by that infrastructure [D3-IAA].

LAUNDRY BEAR has used the following email addresses to procure resources used for this campaign:

• ivanka.zurabishvili@proton[.]me,
• zmul1@buildandconsulting[.]com,
• garrysmithme@pinmx[.]net, and
• hostingclient@pinmx[.]net.

Phishing distribution

LAUNDRY BEAR primarily relied on ProtonMail for distribution of malicious email. However, as stated above, LAUNDRY BEAR’s more recent efforts likely have shifted to distributing the payload through previous victims.  

The following email addresses have distributed payloads attributed to this campaign:

• c.laurent.ejfa@proton[.]me,
• j.moreau.epsc@proton[.]me,
• liberty.insights@proton[.]me,
• certain email addresses (presumably compromised) at the isofts.kiev[.]ua domain (i.e., ending with @isofts.kiev[.]ua), and
• certain email addresses (presumably compromised) at the navs.edu[.]ua domain (i.e., ending with @navs.edu[.]ua).

Additionally, the following are SHA-256 hashes of email samples containing the malicious payload attributed to this campaign:

• 98df604ecc57f884a2e6ce3266a0013ad64455cac48442c2312cfa4765007aaf,
• 60db9abae75cd8ccc49dd7ea5feb41677566dcd442f12ebc5745ffd2810fb874,
• b1f5beb1175fc5c7d1806a2f0d900eb124c54f0286c5c52b66eea7a6633adb1d, and
• 1517b3caa495f6c4e832df9c75fc94667e3c233773f7fa4e056d5e30e5ead760.

Post-compromise artifacts

Currently, the script does not remove artifacts. This leaves additional opportunities to identify victims of this activity. While emphasis should always be placed on consistent monitoring of network traffic and endpoint activity, there are a variety of persistent artifacts described below that can be used to identify victims of this campaign.

This Ulej capability relies on creating a significant number of SOAP requests to collect account information for exfiltration. ZCS logs from these requests are stored, by default, in the /opt/zimbra/log/mailbox.log file [D3-PA]. A significant amount of SOAP request activity that aligns with what was described in the Persistence and credential access and Collection sections of this advisory could indicate a potential compromise. Specific examples of high-risk SOAP request activity might include: