The post Week in review: ServiceNow pre-auth RCE exploited in the wild, Hugging Face breached appeared first on Help Net Security.

Executive summary 

A group of Russian state-supported cyber actors has been targeting and compromising various Western government and commercial organizations using the Zimbra Collaboration Suite (ZCS) software since at least July 2025. The Russian state-supported advanced persistent threat (APT) group’s activity is tracked in the cybersecurity community under several names (see Cybersecurity industry tracking), primarily as “LAUNDRY BEAR,” a name initially coined by the Netherlands General Intelligence and Security Service (AIVD) and Defence Intelligence and Security Service (MIVD) [1].

LAUNDRY BEAR’s targeting is almost certainly to gather sensitive information for the Russian Federation, with these actors primarily focusing on the covert acquisition of email data. Previous campaigns indicated LAUNDRY BEAR relied on unsophisticated initial access techniques—including password spraying, phishing, and pass-the-cookie—allowing the group to successfully run high-volume operations. The latest campaign targeting ZCS uses a novel exploit that was a zero-day vulnerability when first exploited and continues to be successfully exploited. The vulnerability, Common Vulnerabilities and Exposures (CVE) CVE-2025-66376, was patched in November 2025. This demonstrates LAUNDRY BEAR’s intent and ability to deploy increasingly sophisticated technical capabilities.

Unlike traditional phishing campaigns that persuade a user into taking an action, such as clicking a link or opening a file, LAUNDRY BEAR’s latest campaign leverages a view-based exploit that only requires a user to view a malicious email within a vulnerable version of the webmail service. Once viewed, the exploit attempts to exfiltrate the victim’s last 90 days of email communications, the organization email directory (i.e., Global Address List [GAL]), and other sensitive information to servers controlled by LAUNDRY BEAR. The exploit also attempts to establish persistent access to victim accounts through a variety of means as detailed in the Persistence and credential access section.

This Cybersecurity Advisory (CSA) warns of this ongoing malicious threat activity and urges organizations to update their vulnerable software and implement additional mitigations to thwart these Russian state-supported actors’ continued success. The CSA is being released by the following authoring and co-sealing agencies:

• United States National Security Agency (NSA)
• United States Federal Bureau of Investigation (FBI)
• Netherlands Defence Intelligence and Security Service (MIVD)
• Netherlands General Intelligence and Security Service (AIVD)
• United States Cybersecurity and Infrastructure Security Agency (CISA)
• United States Defense Counterintelligence and Security Agency (DCSA)
• United States Department of Defense Cyber Crime Center (DC3)
• United States Department of the Treasury
• United States Naval Criminal Investigative Service (NCIS)
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Communications Security Establishment Canada’s (CSE’s) Canadian Centre for Cyber Security (Cyber Centre)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• United Kingdom National Cyber Security Centre (NCSC-UK)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)¹
• Danish Defence Intelligence Service (DDIS)²
• Estonian Foreign Intelligence Service (EFIS)³
• Finnish Defence Intelligence (FDI)⁴
• Finnish Security and Intelligence Service (SUPO)⁵
• French General Directorate for Internal Security (DGSI)⁶
• French National Cybersecurity Agency (ANSSI)⁷
• Italian External Intelligence and Security Agency (AISE)⁸
• Italian Internal Intelligence and Security Agency (AISI)⁹
• Security and Intelligence Service of the Republic of Moldova (SIS RM)¹⁰
• Polish Foreign Intelligence Agency (AW)¹¹
• The Military Counterintelligence Service of Poland (SKW)¹²
• Spain National Intelligence Centre (CNI)¹³
• Sweden National Cyber Security Centre (NCSC-SE)¹⁴

The authoring agencies urge any organizations using ZCS to implement the recommendations listed within the Mitigations section of this advisory to reduce the risk associated with this activity. This CSA also includes specific remediations for organizations to implement if they discover the presence of the listed Indicators of compromise (IOCs).  

As more organizations update their ZCS software based on this CSA, LAUNDRY BEAR may discontinue the current campaign exploiting this vulnerability; however, based on the success of this and previous campaigns, it is very likely that the group will continue to target ZCS and other email systems used by organizations in Western countries. The actors will almost certainly continue to rely on email to engage potential victims by exploiting novel vulnerabilities and, when necessary, use social engineering techniques to assist with their efforts. The authoring agencies recommend organizations regularly update their mail service software and continuously monitor their email systems and emails for malicious activity.

For a downloadable list of IOCs, see:

• AA26-204A.stix.xml (STIX XML)
• AA26-204A.stix.json (STIX JSON)

Cybersecurity industry tracking

The cybersecurity industry provides overlapping cyber threat intelligence, indicators of compromise (IOCs), and mitigation recommendations related to these Russian state-supported cyber actors. While not exhaustive, the following are threat group names commonly used for these actors within the cybersecurity community:

• LAUNDRY BEAR
• Void Blizzard [2]
• CL-STA-1114 [3]
• TA488 (formerly UNK_PitStop) [4]

Note: Cybersecurity companies have different methods of tracking and attributing cyber actors, and this may not be a 1:1 correlation to the U.S. government’s understanding for all activity related to these groupings.

Background

Public advisories from Netherlands General Intelligence and Security Service (AIVD), Netherlands Defence Intelligence and Security Service (MIVD), and Microsoft highlighted these Russian state-supported advanced persistent threat (APT) actors in May 2025, calling them LAUNDRY BEAR and Void Blizzard respectively [1] [2]. Both advisories assessed that the group was engaged in malicious cyber activity as early as April 2024.  

The May 2025 advisories highlighted a cluster of activity targeting cloud-based email environments, including Microsoft Exchange in particular, and abusing legitimate APIs to perform data exfiltration in bulk [T1114.002]. The group relied on unsophisticated means of initial access, including procuring stolen credentials on criminal marketplaces [T1078], and using social engineering techniques to lure targets into interacting with a malicious site masquerading as a legitimate one. As of April 2025, one of these sites resembled a European Defence & Security Summit registration portal that required registrants to sign in to their Microsoft account to view. Once a user entered their Microsoft credentials into this malicious site, LAUNDRY BEAR’s modified version of the open source adversary emulation toolkit, Evilginx, intercepted the user’s credentials. LAUNDRY BEAR then used this authentication data, including passwords and session tokens, to access the compromised account and conduct mass email exfiltration, as well as harvest other information. This method of compromise is commonly known as an adversary-in-the-middle (AiTM) technique [T1557].  

Beginning around July 2025, LAUNDRY BEAR shifted toward a more technical method of email compromise, highlighting their continued efforts to covertly acquire email communications from a variety of Western organizations of interest and deliver them to the Russian Federation. Using a custom-developed capability [T1587.001] named “Улей” or “Ulej” (Russian for beehive), LAUNDRY BEAR successfully targeted and exfiltrated sensitive user information from organizations who use the Zimbra Collaboration Suite (ZCS) product [T1114]. Data LAUNDRY BEAR attempted to exfiltrate from compromised accounts included:

• Last 90 days of emails,
• Email address,
• Password [T1589.001],
• Global Address List (GAL) [T1087],
• Two-factor authentication (2FA) tokens, and
• Newly-created Application Passcode [T1098].

The covert and persistent nature of this activity, along with the absence of any known financial extortion, almost certainly indicates this group’s involvement in espionage activities with Russian government backing. Additionally, extensive Ukrainian targeting, prior to use against U.S. and other NATO allies, outlines an increasing trend within Russian cyber threat groups to target Ukrainian users first—both as a priority target and as a testbench for malicious cyber techniques before broader global deployment.

Targeting details

LAUNDRY BEAR has targeted and compromised users in various organizations, including those associated with:

• the Defense Industrial Base (DIB),  
• the federal and local government,
• education,
• energy,
• law enforcement,  
• media,  
• non-governmental organizations, and
• technology.

Technical details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise framework, version 19. This advisory also uses MITRE D3FEND^TM version 1.4.0¹⁵. See Appendix A and Appendix B for tables of the activity mapped to MITRE ATT&CK and D3FEND tactics, techniques, and countermeasures.

Ulej is a novel data exfiltration and aggregation capability, that currently (as of the publication of this report) supports a campaign specifically targeting users of ZCS webmail servers. This capability is used to exploit CVE-2025-66376 [Common Weakness Enumeration (CWE) CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')], but likely could be adapted to exploit other vulnerabilities. It exfiltrates emails and other sensitive user data from a victim’s system immediately after exploitation and stores the data in an actor-controlled unattributable virtual private server (VPS) [T1074.002] running LAUNDRY BEAR’s “Flowerbed” collection framework. The collected data is almost certainly further exfiltrated to internal network resources for review and long-term retention.

Reconnaissance

LAUNDRY BEAR uses the Ulej capability to exploit the CVE-2025-66376 vulnerability in organizations using ZCS. This campaign’s targeted victimology and limited exploitation capabilities likely indicate this group manually identifies and targets the victim organizations. LAUNDRY BEAR likely identifies organizations with public-facing Zimbra infrastructure by port scanning [T1595] and fingerprinting datasets easily procured through various commercial vendors [T1596.005].  

After identifying a target organization, the group likely compiles email addresses for individual users to target with the exploit [T1589.002] from datasets offered by commercial vendors [T1597.002], open source intelligence [T1593], or previously exfiltrated data [T1597].  

Resource development

The actors procure VPSs from a variety of providers [T1583.003], including those with Know Your Customer (KYC) requirements, and often use fabricated identities. LAUNDRY BEAR primarily uses Mullvad VPN [T1583] when interacting with these servers, further demonstrating the group’s intent to mask their identity and maintain operations security (OPSEC). After the server is provisioned, an automated process deploys the Docker containers necessary for Ulej’s Flowerbed framework [T1608], which then receives and aggregates the data Ulej exfiltrates. These servers are typically only used for 7-60 days before moving to new infrastructure.

Flowerbed framework

Flowerbed is a Python project that uses Docker for containerization. The project includes four different Docker containers:

• Catcher,
• Certbot,
• Nginx, and
• Gardener.

Catcher acts as both a DNS and HTTP server to receive and aggregate exfiltrated victim information [T1048]. For additional information on Catcher, refer to the Exfiltration section of this advisory. Flowerbed’s next container, Certbot, is based on one of the official Certbot containers, which allows for automated generation of Let’s Encrypt certificates using DNS challenges through Cloudflare. This certificate can then be used by the Nginx container, which serves as an HTTPS reverse proxy for Catcher, enabling Flowerbed to disguise some of its exfiltration activity through an encrypted communications channel [T1048.002]. The Nginx reverse proxy also validates that the Server Name Indicator (SNI) value contains “*.i.*” prior to forwarding the traffic to Catcher. If the SNI does not contain that string, the Nginx server returns a 444 error to the client. This is likely an attempt to reject non-Ulej connections. Finally, the Gardener container functions as a health check for the Catcher service. Gardener is a simple Python script that validates Catcher correctly receives and processes data.

The simplistic Flowerbed codebase has indications that artificial intelligence (AI) played a role in its development. This highlights how AI is increasingly being used to develop malicious capabilities [T1588.007]. The dependence on AI for a simple capability, such as Flowerbed, alongside a previous reliance on open source capabilities, such as Evilginx2 [T1588.002], likely indicates a lack of advanced technical knowledge within LAUNDRY BEAR, especially in relation to true software development capabilities.

Initial access

To gain initial access, LAUNDRY BEAR sends an email containing a malicious JavaScript payload to the target [T1566]. Through exploitation of CVE-2025-66376, this JavaScript payload is immediately executed once the user views the malicious email [T1203], such as the one shown in Figure 1, in the ZCS webmail platform. Since at least November 2025, LAUNDRY BEAR began sending these phishing emails from victim infrastructure through compromised accounts [T1199], as shown in the email metadata in Figure 2. These compromised accounts were likely previous victims of this, or another LAUNDRY BEAR, campaign and their use is intended to further obfuscate and frustrate anti-phishing tools and training.

According to the National Vulnerability Database (NVD), CVE-2025-66376 was initially published on 5 January 2026. This vulnerability allows for execution of a JavaScript payload included in email content due to improper sanitization of Cascading Style Sheet’s (CSS) @import directives within an email [5]. Because the activity attributed to this campaign began in July 2025—months before Synacor released a patch and the CVE was published—the payload initially exploited a zero-day vulnerability at that time [T1587.004].  

Utilization of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability.

Hidden in LAUNDRY BEAR’s email is a Base64 encoded payload within the “onload” field of a Scalable Vector Graphics (SVG) element [T1027.017], as shown in Figure 3. Leading up to the inclusion of this payload in the SVG element are various instances of @import directives, as required to leverage CVE-2025-66376. This payload includes an XOR encrypted final script encoded in a Base64 inner payload (see Figure 3) [T1027.013]. The outer payload decodes and decrypts the inner payload using an XOR function and a hardcoded key and then executes the script contained within the inner payload containing the collection and exfiltration logic. By changing the key used for the XOR encryption of the inner payload or adding additional @import directives with non-functional code [T1027.010], LAUNDRY BEAR can easily generate new payloads that bypass basic threat detection signatures. This malicious payload attempts to collect and exfiltrate information in 12 asynchronous stages [T1119]. The stages in order of appearance within the payload are as follows:

1. sendStartPing,
2. gather_email,
3. gather_environment,
4. gather_2fa_codes,
5. gather_app_password,
6. gather_device_status,
7. gather_oauth_consumers,
8. gather_autocomplete_password,
9. enable_mail_protocols,
10. gather_gal,
11. sendArchives, and
12. sendFinishPing. 

Use of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability [T1587].

Persistence and credential access

To establish sustained persistence into the victim’s email account, the script attempts to modify account preferences and collect authentication information. Any collected credentials are later exfiltrated, as further described in the Exfiltration section below. Other campaigns attributed to LAUNDRY BEAR also demonstrated the group’s ability to circumvent multi-factor authentication through session token replay [T1550.004], and the Zimbra campaign follows a similar trend.

The script used in this campaign tries to discover the victim’s email address during the gather_email stage [T1087]. The script searches for this email address in two ways. First, it examines the batchInfoResponse variable, which an HTML script element on the webpage can define, for an email address. Even if the script finds an email address there, it also checks whether it acquired a Cross-Site Request Forgery (CSRF) token as described later in the Collection section of this advisory. If so, the script uses the “GetIdentitiesRequest” Simple Object Access Protocol (SOAP) command under the “ZimbraAccount” namespace to determine the victim’s email address [T1185] and then exfiltrates it. However, if the script does not have a CSRF token or the SOAP request fails, the script exfiltrates the email value recovered from the first method instead. If both attempts fail to capture the victim’s email, the script sends a JavaScript Object Notation (JSON) payload with a key of “email” and value of null over HTTPS and does not attempt DNS exfiltration.

During the gather_autocomplete_password stage, the script attempts to collect the victim’s saved password via the autocomplete feature of the victim’s password manager. The script injects two HTML div elements requesting login credentials onto the page outside of the victim’s view, as shown in Figure 4 and Figure 5. After waiting five seconds, the script then attempts to extract the password provided automatically by the password manager from the input element shown in Figure 4. If there is no value in that input field, it checks the password input field shown in Figure 5. If neither input field contains a value, a JSON payload with a key of “autocomplete_password” and value of null is sent over HTTPS and DNS exfiltration is not attempted.

LAUNDRY BEAR almost certainly relies on a mail client using the Internet Message Access Protocol (IMAP) for persistent access to the victim’s mailbox. During the enable_mail_protocols stage, a SOAP request leveraging the “ModifyPrefsRequest” command under the “ZimbraAccount” namespace is sent. This request attempts to set the “zimbraPrefImapEnabled” preference to TRUE. While the default setting for “zimbraPrefImapEnabled” is not well documented, this action is almost certainly intended to ensure that IMAP access to the victim’s mailbox is enabled.

ZCS does not support 2FA for some mail clients, including IMAP. To support users who rely on IMAP clients, ZCS allows for the generation of Application Passcodes. Application Passcodes are randomly generated passwords that can be used for clients that cannot support the normal 2FA process to authenticate. During the gather_app_password stage, the script makes a SOAP request using the “CreateAppSpecificPasswordRequest” command under the “ZimbraAccount” namespace to create a new Application Passcode [T1556.006]. The SOAP request uses “ZimbraWeb” as the name of the application.

Additionally, the script also attempts to collect 2FA tokens. During the gather_2fa_codes stage, the script makes a SOAP request using the “GetScratchCodesRequest” command under the “ZimbraAccount” namespace. The script then attempts to exfiltrate any non-null 2FA codes collected this way. The number of codes can vary, and each code is exfiltrated to Flowerbed individually.

Collection

As demonstrated in the Persistence and credential access section, this script relies heavily on SOAP requests to collect victim information. To make these requests, the script aims to acquire the victim’s current CSRF token, which it attempts to access within the webpage’s local storage using localStorage.getItem("csrfToken"). If the script is unable to acquire this CSRF token, it will be unable to make any SOAP requests. In addition to the SOAP commands documented in the Persistence and credential access section, other SOAP commands executed to collect victim information are shown in Table 1.

The script attempts to collect the victim’s GAL through brute force by searching for each two-character combination from a character set of “abcdefghijklmnopqrstuvwxyz1234567890.-_”. These queries are conducted using 20 batches of SOAP requests with 77 “SearchGalRequest” SOAP commands in each batch except for the last request containing only 58.

During the gather_environment stage, the script attempts to determine which type of ZCS webmail client the victim is using. The script checks the user’s current URL to determine the client type being used, checking for certain indicators (shown in Table 2) to determine the client type. The corresponding value is then used as the payload when exfiltrating the client type.

As part of collection, the script attempts to harvest any emails not marked as “junk” from the last 90 days from the victim’s account. Emails are collected daily by an HTTP GET request to the URL path, “/home/~/?fmt=tgz&meta=0&query=date:-{DAY_OFFSET}d AND (not in:junk)”. The {DAY_OFFSET} value would be between 0 and 89 representing how many days ago the email was sent or received. To prevent redundant collection and exfiltration of emails, a variable with a name based on the email date being queried, using a format of zd_comp_YYYY-MM-DD, and value of true, is saved to the window.top.localStorage property. This variable is saved regardless of whether the email is successfully exfiltrated.  

According to Mozilla documentation, if the user is not in a private browsing session, any data stored to localStorage does not typically expire. This means that if the user happens to execute the script again from the same computer, the script avoids attempting to re-exfiltrate previously captured emails. However, the script always attempts to pull any emails with a {DAY_OFFSET} of zero. In other words, the script always pulls emails sent or received the same day it is run. After email results are returned from the query for each day of email activity, those results are then passed to Flowerbed as described in the Exfiltration section.

The script also provides LAUNDRY BEAR with telemetry on any errors that occur during the collection process. This is accomplished by executing any collection or exfiltration code through helper functions that contain error handling logic. If an error occurs, a payload containing information on the error itself, the context of the error happening, and the stage in which the error occurred is sent to Flowerbed as described in the Exfiltration section below. For cases where the error occurs within a SOAP request, “:api” is concatenated to the stage value in the payload. If an error occurs during the batch SOAP requests that occur when collecting the GAL of the victim, the stage value will use a format of gather_gal:{VAL}:api. The {VAL} placeholder indicates which batch request, a number from 0 to 19, the error occurred in. Errors that occur during the password autocomplete interception process will use “gather_autocomplete_password:dom” for the stage value. Finally, if an error occurs when attempting to collect or exfiltrate a specific day’s emails, the stage will include which day the error occurred on, using the previously defined placeholder {DAY_OFFSET}, with a format of sendArchive:day-{DAY_OFFSET}.

Exfiltration

At the end of each stage in the collection process, the script attempts to exfiltrate acquired information to Flowerbed. The script primarily relies on two forms of data exfiltration: DNS [T1048.003] and HTTPS. Some information is exfiltrated over both the DNS and HTTPS channels.

Prior to exfiltration, a randomized 10- or 11-character alphanumeric string is generated as an identifier for the victim. This identifier is included in the URL of both the DNS- and HTTPS-based exfiltration.  

DNS exfiltration

DNS exfiltration occurs through DNS A record queries. To ensure data exfiltrated through DNS is not corrupted when traversing through non-actor-controlled DNS infrastructure, Ulej maintains compliance with RFC 1035, Domain Names - Implementation and Specification, specifically accounting for the case insensitivity and subdomain length requirements. Base32 encoding is used to create a case-insensitive payload. Once the payload is encoded, a period (“.”) is added every 60 characters to ensure each subdomain is under 63 characters long. The script then creates a new image object sourced from a URL with the scheme defined in Figure 6. Any traffic involving DNS exfiltration will have “d-“ prefixing the victim identifier, and the subdomain immediately following indicates the type of information being exfiltrated.

When the script generates an image object, the browser tries to retrieve the complete domain of the URL specified as the source of the image. This triggers a DNS request sent to the actor-controlled server and processed by Flowerbed. Table 3 lists both the information exfiltrated via DNS and their corresponding data type identifiers in the DNS queries.  

HTTPS exfiltration

Any information exfiltrated via DNS is also exfiltrated through HTTPS, as well as additional data including email content, contacts, attachments, and error logging information. By using Let’s Encrypt certificates, this group can quickly deploy new infrastructure and leverage encrypted HTTPS communications with valid server certificates when exfiltrating information from the victim’s environment. The HTTPS exfiltration capability only uses two HTTP content types, defined in Table 4. Traffic associated with HTTPS exfiltration will use the URL scheme shown in Figure 7.  

Some of the data transmitted via HTTPS uses the standard JSON content type format. The script includes the information in a POST request to actor-controlled infrastructure.  

Table 5 provides a summary of the JSON-based exfiltration.

The script transmits all HTTPS exfiltration not identified in Table 5 using the Octet-Stream content type as binary data. The POST requests for this method include a filename in the “X-Filename” header. Traditionally, developers use headers prefixed with “X-” to denote custom headers that do not follow a defined standard. The purpose of including this header remains unclear since the Catcher capability ignores the provided filename when saving the data. Table 6 summarizes the data exfiltrated in this format.

The script sends all exfiltrated data identified in Table 6 to the Catcher service exactly as received from the SOAP request in a JSON payload, except for email exfiltration. For email exfiltration, the script sends it as a GZIP compressed archive [T1560]. Although most of the exfiltration consists of valid JSON, the script still attempts to exfiltrate all information identified in Table 6 using the application/octet-stream content typing rather than application/json.

At the beginning and end of the collection and exfiltration activity, during the sendStartPing and sendFinishPing stages respectively, the script submits a POST request with a JSON payload to indicate that the script is starting or finishing execution. Throughout execution, the script also logs error events and send the logs using similar JSON payloads. The script sends the JSON in a POST request to the URL documented in Figure 2, using a URL path of “/v/p” and with a “subtype” key that shows which type of action it logged (start, finish, or error).  

Catcher

Ulej exfiltrates information to Flowerbed to be handled by a service named Catcher. Catcher is a containerized Python application, running in Docker as part of Flowerbed, which is detailed in the Resource development section. It receives exfiltrated data and temporarily stores it, enabling its eventual transfer to infrastructure designed for long-term, secure storage.

Catcher acts as an HTTP server over port 8000 and a DNS server on port 53. As described in the Resource development section, the Flowerbed project uses an additional Docker container running an Nginx reverse proxy to enable HTTPS support. This reverse proxy uses a certificate generated by Let’s Encrypt and forwards all traffic with an SNI containing “*.i.*” to port 8000 within the Catcher container.

The DNS service can accept A, AAAA, MX, TXT, and CAA queries. For any MX, AAAA, or CAA queries, the server will always provide an empty response. The system only supports TXT records as needed to process Automatic Certificate Management Environment (ACME) requests, which enable the assignment of Let’s Encrypt certificates. If the server receives an A query, Catcher will always respond with the public IP address of the Flowerbed server.  

However, if a query includes a domain formatted as shown in Figure 6 and Figure 7, the service saves a log file in JSON format to disk containing the following details of the DNS query:

• Time of query,
• Source IP address for query,
• Queried domain, and
• Type of query.

The HTTP server typically responds with OK, except in cases where the path is “pixel.gif” when the response contains a 1x1 gif image with a SHA-256 hash of ef1955ae757c8b966c83248350331bd3a30f658ced11f387f8ebf05ab3368629. Like the DNS service, the HTTP service will only log entries when the domain found in the host header of the request follows the expected formatting as seen in Figure 6 and Figure 7. As the HTTPS exfiltration uses non-standardized binary and JSON-formatted payloads when exfiltrating to Catcher, Catcher will check the content type of the request. If the content type is set to “application/json”, Catcher encodes the data in Base64 and includes it in the JSON log entry written to disk. If the content type is set to any other value, Catcher leaves the Base64 payload in the JSON log entry blank and saves the payload to a separate file with the same filename as the JSON log entry with a “.bin” file extension. An HTTPS exfiltration event causes Catcher to save a JSON formatted log file to disk containing the following information from the HTTP request:

• Time,
• Source IP address,
• Request method,
• Host,
• Path,
• Query string,
• Headers, and
• Base64 payload.

These JSON event log files and binary output files are then initially saved to the directory /root/hits/tmp and later moved to the /root/hits/ready directory once processed. This prevents incomplete files, which are still being uploaded to Catcher, from premature exfiltration from the server. Approximately every 60 seconds, a likely automated workflow establishes a Secure Shell (SSH) connection with the server hosting Flowerbed for a few seconds, almost certainly exfiltrating the data processed by Catcher to non-public-facing infrastructure. The command in Figure 8 also executes hourly to remove all files last modified at least two days ago from the /root/hits/ready directory.

Response strategies

Mitigations

In many cases, by the time an organization identifies a compromise related to this campaign, numerous sensitive and proprietary emails have already been exfiltrated. The significant risk posed by this cyber threat emphasizes the importance for organizations that use ZCS and other similar webmail solutions to take proactive steps to mitigate this risk.

All organizations that use the ZCS webmail service should immediately prioritize ensuring that their ZCS is not running a vulnerable version. A patch for CVE-2025-66376 was released for both 10.1.13 and 10.0.18 versions of ZCS [D3-AH]. If immediate patching is not feasible, organizations should advise employees to use alternative mail clients to access email and avoid using the Classic ZCS webmail client until ZCS is updated to a non-vulnerable version [d3f:Isolate].

System administrators should closely monitor any Internet-connected ZCS or other email systems and the workstations that access those systems and promptly apply available software updates [D3-AH]. Administrators can maintain awareness of active vulnerability exploitation by referencing open source resources, including CISA’s Known Exploited Vulnerabilities Catalog and NCSC-UK’s Responding to active exploitation of vulnerabilities guidance.

Organizations should consider using a third-party authentication service that supports passkeys for authentication to mediate access to ZCS and other services that do not natively support passkeys. By doing so, organizations can work to eliminate the possibility of automated password collection from autocomplete or password reuse [D3-CH]. However, Application Passcodes may still be necessary and should be monitored closely.  

Organizations should implement network monitoring capabilities with collection and short-term retention of packet capture or NetFlow data and maintain log collection and storage [CPG 3.Q]. This will allow organizations to monitor for and identify suspicious network activity [CPG 4.B], such as:

• Significant amounts of outbound data being sent to IPs associated with VPS providers not used by the organization [D3-NTA];
• Frequent DNS queries for a suspicious domain with seemingly random subdomains [D3-DNSTA];
• A sudden spike of connections to a server associated with a recently established domain [D3-NTCD]; and  
• Connections to internal services, such as webmail, from VPN providers frequently leveraged by this group for nefarious activity, such as Mullvad VPN [D3-NTCD].

Additionally, for organizations that can inspect the content of outbound HTTPS connections via break-and-inspect infrastructure, security teams should identify traffic matching the characteristics described in the Exfiltration section of this advisory.

Indicators of compromise (IOCs)

Flowerbed infrastructure

The following indicators have been attributed to use by LAUNDRY BEAR for their campaign targeting ZCS’s webmail service as of the publication of this advisory. (Disclaimer: Due to the frequency of operational structure changes by this group, these indicators are intended solely for historic attribution purposes. Some indicators, such as IPs, compromised emails, and domains, may be outdated, so organizations should check for current activity before acting on these IOCs.) Table 7 provides details about the server infrastructure used to host Flowerbed, and Table 8 lists the corresponding SHA-1 hash values for the Let’s Encrypt certificates used by that infrastructure [D3-IAA].

LAUNDRY BEAR has used the following email addresses to procure resources used for this campaign:

• ivanka.zurabishvili@proton[.]me,
• zmul1@buildandconsulting[.]com,
• garrysmithme@pinmx[.]net, and
• hostingclient@pinmx[.]net.

Phishing distribution

LAUNDRY BEAR primarily relied on ProtonMail for distribution of malicious email. However, as stated above, LAUNDRY BEAR’s more recent efforts likely have shifted to distributing the payload through previous victims.  

The following email addresses have distributed payloads attributed to this campaign:

• c.laurent.ejfa@proton[.]me,
• j.moreau.epsc@proton[.]me,
• liberty.insights@proton[.]me,
• certain email addresses (presumably compromised) at the isofts.kiev[.]ua domain (i.e., ending with @isofts.kiev[.]ua), and
• certain email addresses (presumably compromised) at the navs.edu[.]ua domain (i.e., ending with @navs.edu[.]ua).

Additionally, the following are SHA-256 hashes of email samples containing the malicious payload attributed to this campaign:

• 98df604ecc57f884a2e6ce3266a0013ad64455cac48442c2312cfa4765007aaf,
• 60db9abae75cd8ccc49dd7ea5feb41677566dcd442f12ebc5745ffd2810fb874,
• b1f5beb1175fc5c7d1806a2f0d900eb124c54f0286c5c52b66eea7a6633adb1d, and
• 1517b3caa495f6c4e832df9c75fc94667e3c233773f7fa4e056d5e30e5ead760.

Post-compromise artifacts

Currently, the script does not remove artifacts. This leaves additional opportunities to identify victims of this activity. While emphasis should always be placed on consistent monitoring of network traffic and endpoint activity, there are a variety of persistent artifacts described below that can be used to identify victims of this campaign.

This Ulej capability relies on creating a significant number of SOAP requests to collect account information for exfiltration. ZCS logs from these requests are stored, by default, in the /opt/zimbra/log/mailbox.log file [D3-PA]. A significant amount of SOAP request activity that aligns with what was described in the Persistence and credential access and Collection sections of this advisory could indicate a potential compromise. Specific examples of high-risk SOAP request activity might include:

• Many SearchGalRequest command requests from a single user over a short period of time;
• Use of the CreateAppSpecificPasswordRequest command, especially in cases where it is creating an Application Passcode named “ZimbraWeb”; and
• Use of the GetScratchCodesRequest command.

While LAUNDRY BEAR uses the localStorage property to track what days had emails previously exfiltrated, defenders can use this property to identify victims of this campaign and determine the scope of exfiltrated information [D3-PA]. Review of the items stored in that property for an organization’s ZCS webmail client page on an endpoint device could indicate compromise if there are items named with a format of zd_comp_YYYY-MM-DD, as explained in the Collection section of this advisory.

While Application Passcodes have non-malicious purposes, in this case instances of these passcodes with the name “ZimbraWeb” are almost certainly malicious. The ZCS webmail application can support 2FA natively and does not require the use of an Application Passcode, so there is no reason that there should be one named “ZimbraWeb.”

In instances where organizations identify victims of this campaign, they should also examine the inbox of the suspected victim for the original phishing email [D3-MA]. If an email that has a payload exploiting CVE-2025-66376 is discovered, steps should be taken immediately to identify and quarantine other instances of emails with similar body content, senders, and subject lines to prevent further exploitation and exfiltration.  

Remediation

In the event an organization identifies activity associated with this campaign, that organization should take steps to minimize further exploitation. The organization should consider requesting that employees minimize use of the ZCS webmail client until the organization updates to a patched version that is not vulnerable to CVE-2025-66376.

Organizations should use identifiers from the IOCs section of this report to identify any individuals compromised by this campaign and record the date(s) of compromise(s) to determine the scale and scope of emails exfiltrated.

All users from the organization should have all Application Passcodes and 2FA scratch keys revoked. Affected organizations should require all employees to change passwords in line with establishing minimum password strength requirements [CPG 3.B] and creating unique credentials [CPG 3.C], specifically noting that compromised employees might have had any password stored in a password manager exfiltrated.

Works cited

[1] Netherlands General Intelligence and Security Service (AIVD) and Netherlands Defence Intelligence and Security Service (MIVD). AIVD and MIVD identify a new Russian cyber threat actor. 2025. https://www.aivd.nl/site/binaries/site-content/collections/documents/2025/05/27/aivd-en-mivd-onderkennen-nieuwe-russische-cyberactor/Advisory+AIVD+en+MIVD+Public+report+on+new+cyber+actor.pdf

[2] Microsoft Corporation. New Russia-affiliated actor Void Blizzard targets critical sectors for espionage. 2025. https://www.microsoft.com/en-us/security/blog/2025/05/27/new-russia-affiliated-actor-void-blizzard-targets-critical-sectors-for-espionage/

[3] Palo Alto Networks Unit 42. Russian Global Webmail Espionage. 2026. https://unit42.paloaltonetworks.com/russian-webmail-espionage/ 

[4] Proofpoint. TA488 Targets Zimbra Mailservers with Half-Click Exploits. 2026. https://www.proofpoint.com/us/blog/threat-insight/ta488-zcs-exploit

[5] Seqrite. Operation GhostMail: Russian APT exploits Zimbra Webmail to Target Ukraine State Agency. 2026. https://www.seqrite.com/blog/operation-ghostmail-zimbra-xss-russian-apt-ukraine/  

Footnotes

¹ Národní úřad pro kybernetickou a informační bezpečnost
² Forsvarets Efterretningstjeneste
³ Välisluureamet
⁴ Sotilastiedustelu
⁵  Suojelupoliisi
⁶ Direction générale de la sécurité intérieure
⁷ Agence nationale de la sécurité des systèmes d’information
⁸ Agenzia Informazioni e Sicurezza Esterna
⁹ Agenzia Informazioni e Sicurezza Interna
¹⁰ Serviciul de Informații și Securitate al Republicii Moldova
¹¹ Agencja Wywiadu
¹² Służba Kontrwywiadu Wojskowego
¹³ Centro Nacional de Inteligencia
¹⁴ Nationellt Cybersäkerhetscenter
¹⁵ MITRE and ATT&CK are registered trademarks of The MITRE Corporation. MITRE D3FEND is a trademark of The MITRE Corporation.

Acknowledgements

The authoring agencies acknowledge the contributions to this advisory from Palo Alto Networks Unit 42 and Proofpoint.

Disclaimer of endorsement

The information and opinions contained in this document are provided "as is" and without any warranties or guarantees. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement, recommendation, or favoring by the United States Government, and this guidance shall not be used for advertising or product endorsement purposes.

Organizations have no obligation to respond or provide information back to the authoring organizations in response to this joint advisory. If, after reviewing the information provided, an organization decides to provide information to the authoring organizations, reporting must be consistent with all applicable laws and policies.

Purpose

This document was developed in furtherance of the authoring agencies’ cybersecurity missions, including their responsibilities to identify and disseminate threats, and to develop and issue cybersecurity specifications and mitigations. This information may be shared broadly to reach all appropriate stakeholders.

Contact

Appendix A: MITRE ATT&CK tactics and techniques

See Table 9 through Table 19 for all the threat actor tactics and techniques referenced in this advisory.

Appendix B: MITRE D3FEND countermeasures

See Table 20 for a mapping of several of the cybersecurity countermeasures mentioned in this advisory.

Today we're releasing Android 17 and making it available on most supported Pixel devices. Look for new devices running Android 17 in the coming months.

Android 17 marks the start of our transition to an intelligence system, putting your apps at the center. It's shifting to an adaptive-first development standard by introducing mandatory large-screen resizability, all while delivering next-generation privacy, security, media, camera, and performance. We'll cover all that in this post, as well as how we're bringing together next generation tools, libraries, and agent skills to help your apps embrace the opportunity.

Throughout the past year, from our Canary channel to our Beta releases, we’ve collaborated with you in the developer community to build a platform you and your users can trust. To that end, this moment marks the availability of the source code at the Android Open Source Project (AOSP). This allows you to examine the source code for a deeper understanding of how Android works.

Let's dive deeper into Android 17.

An intelligence system

With deep integration between hardware, software and AI, we’re transforming Android from an operating system to an intelligence system. It's about delivering new helpful experiences that anticipate user needs, and it brings more opportunities for engagement with your apps. To that end, Android 17 expands the capabilities of AppFunctions, a platform API with a corresponding Jetpack library. It allows you to contribute your app's unique capabilities as orchestratable "tools" for Android MCP, the on-device equivalent of the Model Context Protocol. AI agents and assistants (like Google Gemini) can discover and execute AppFunctions to perform workflows on behalf of the user with direct access to the app's local state.

The Jetpack library, currently in alpha, makes adding AppFunctions as easy as annotating a class and adding KDoc comments.

/**
 * A note app's [AppFunction]s.
 */
class NoteFunctions(
    private val noteRepository: NoteRepository
) {
    /**
     * Adds a new note to the app.
     *
     * @param appFunctionContext The execution context.
     * @param title The title of the note.
     * @param content The note's content.
     */
    @AppFunction(isDescribedByKDoc = true)
    suspend fun createNote(
        appFunctionContext: AppFunctionContext,
        title: String,
        content: String
    ): Note {
        return noteRepository.createNote(title, content)
    }
}

We’ve also launched an AppFunctions agent skill that analyzes your app’s key workflows, automatically generates the required Kotlin code, optimizes your KDocs for LLM tool-calling, and provides ADB commands for testing and debugging.

The Gemini integration is currently in a private preview with trusted testers, but you can begin preparing your apps now. In addition to ADB commands to execute your AppFunctions, we've provided a test agent app that includes an interface to discover and execute your app functions and simulate an AI agent integration. Join our integration early access program at goo.gle/eap-af for a chance to be among the first apps to deploy AppFunctions to production.

Adaptive-first

Your users no longer rely on a single form factor; they transition between phones, foldables, tablets, laptops, automotive displays, and immersive XR environments. Now, with over 580 million large screen devices in the hands of users and the forthcoming launch of Googlebooks, the next generation of ChromeOS built on the Android stack, adaptive is no longer just a technical goal. It’s a massive opportunity to reach highly engaged users, which is one of the reasons we're shifting to an adaptive-first development standard.

No resizability/orientation restrictions on large screens

To ensure apps deliver a premium experience across all form factors, including mobile devices running in desktop mode on connected displays, Android 17 (API level 37) removes the developer opt-out for orientation and resizability restrictions on large screen devices (sw > 600 dp) for apps targeting API level 37. The system will ignore legacy manifest attributes and runtime APIs, including screenOrientation, setRequestedOrientation(), resizeableActivity=false, and aspect ratio constraints (minAspectRatio/maxAspectRatio). Games (based on app category in Google Play) remain exempt. Your app must be ready to adapt to any window size, respect the user's preferred device posture, and support free-form windowing natively.

Next-gen multitasking: App Bubbles, Bubble Bar, and desktop interactive PiP

Android 17 introduces powerful new windowing capabilities that redefine how users multitask, demanding even greater layout flexibility from your apps:

• App Bubbles: Moving beyond the messaging bubbles API, users can now transform any app into a floating bubble by long-pressing its icon on the launcher. This feature is available across phones, foldables, and tablets, enabling lightweight multitasking for any workflow.
• The Bubble Bar: On large screens (tablets and foldables), the system taskbar now includes a dedicated Bubble Bar to organize, transition between, and dock these floating app bubbles.
• Desktop interactive PiP: In desktop environments, Android 17 introduces interactive Picture-in-Picture (PiP). Unlike traditional PiP windows which are read-only, these pinned windows remain fully interactive while staying always-on-top of other application windows.

App Bubbles and Bubble Bar in action

Activity recreation updates

To prevent disruptive state loss and stutter, Android 17 updates the default behavior for Activity recreation. The system will no longer restart activities by default for typical configuration changes that do not require a full UI redraw (including CONFIG_KEYBOARD, CONFIG_KEYBOARD_HIDDEN, CONFIG_NAVIGATION, CONFIG_TOUCHSCREEN, and CONFIG_COLOR_MODE).
Instead, running activities will receive these updates via onConfigurationChanged(), enabling smooth transitions. If your application explicitly relies on a full restart to reload resources for these changes, you must now explicitly opt-in using the new android:recreateOnConfigChanges manifest attribute.

Continue On

Android 17 adds Continue On to help users seamlessly transition a task between Android devices. The user sees a suggestion for the most recently opened app from their mobile device in their tablet taskbar, providing a one-tap affordance to launch the app and deep-link where they left off. Continue on can support app-to-web transitions, including falling back to using the web if the app isn't installed.

Handoff Suggestion on a Tablet

class MyHandoffActivity : Activity() {

    ...

  override fun onCreate(savedInstanceState: Bundle?) {
    super.onCreate(savedInstanceState)
    // Do stuff
    ...
    // Enable handoff
    setHandoffEnabled(true, null)
  }

  // Override and implement onHandoffActivityDataRequested
  override fun onHandoffActivityDataRequested(handoffRequestInfo: HandoffActivityDataRequestInfo) : HandoffActivityData {
    // Create and return handoff data
  }
}

Go adaptive-first with Jetpack Compose

To help you adapt your apps to meet the new Android 17 requirements, we've launched the Jetpack Compose adaptive skill. This AI-powered developer workflow helps you implement the best adaptive practices:

• Adaptive navigation: Automatically transition between bottom navigation bars on mobile and edge-anchored navigation rails on large screens using NavigationSuiteScaffold from the Material 3 Adaptive library.
• Multi-pane layouts: Implement list-detail and supporting pane layouts natively using Navigation 3 Scenes (ListDetailSceneStrategy and SupportingPaneSceneStrategy) instead of fragile fragment transactions.
• FlexBox & Grid APIs: Utilize Compose 1.11's dynamic layout components to easily adjust row and column spans on the fly, ensuring your content always fills the space beautifully.
• Advanced non-touch input: Leverage Compose 1.11's enhanced trackpad and mouse support, including native focus rings and new APIs (like TrackpadInjectionScope and performTrackpadInput) to easily test and deliver a true "laptop-class" experience on Googlebooks and Desktop Mode.
• Dynamic window states: Leverage Compose's reactive state model to seamlessly adapt your UI when the app transitions from full screen to a floating App Bubble or an interactive Desktop PiP window, ensuring a premium experience even at minimal dimensions.

Android is Compose-first

Compose offers the easiest way to build adaptive apps, and that's just one of the many reasons we believe that all Android UI should be built with Compose. To that end, Android development is now Compose-first. All new Android APIs, libraries, tools, and developer guidance will be built exclusively for Jetpack Compose. Legacy View components (in the android.widget package) and View-based Jetpack libraries (like Fragments, RecyclerView, and ViewPager) are now in maintenance mode. They will receive only critical bug fixes, and no new features.

TIP
Ready to migrate? Use our AI-driven XML to Compose Migration Skill to automatically analyze your legacy View layouts and convert them into highly-adaptive Compose code.

Performance & efficiency

App performance means a smooth user interface, fast app start times, and efficient multitasking; Android 17 has impactful improvements in all of these areas.

App memory limits

Memory usage is one of the silent foundations of overall performance. When a foreground app or service grows unchecked, memory management spikes CPU and battery utilization and eventually leads to the termination of other well-behaved cached apps and background jobs, ultimately forcing slower cold starts and impaired multitasking. 

Starting in Android 17, the system will enforce strict app memory limits based on a device's total RAM, abruptly terminating offending processes. New things to help you navigate these tighter requirements:

• R8 Optimizer: The R8 optimizer significantly reduces your app's bytecode memory footprint by shrinking classes, methods, and fields into shorter names, and stripping out unused code and resources. Use R8 in full mode along with the new R8 configuration analyzer to make sure your app is getting the most from R8.
  

• LeakCanary in Android Studio Panda: The profiler now features native LeakCanary integration as a dedicated task, fully integrated with your IDE and source code.
• ApplicationExitInfo: If your app is terminated by these limits, getDescription() from ApplicationExitInfo will return "MemoryLimiter:AnonSwap".
• On-Device Anomaly Detection: Part of ProfilingManager, you can leverage trigger-based profiling using TRIGGER_TYPE_ANOMALY to automatically capture heap dumps when the memory limit is reached.

val profilingManager = applicationContext
   .getSystemService(ProfilingManager::class.java)

val triggers = ArrayList<ProfilingTrigger>().apply {
  add(ProfilingTrigger.Builder(
    ProfilingTrigger.TRIGGER_TYPE_ANOMALY).build())
}
profilingManager.addProfilingTriggers(triggers)

And, we're working to surface more in-field memory metrics to you within Google Play Console.

Generational garbage collection

Android 17 introduces more frequent, less resource-intensive young-generation collections to ART's Concurrent Mark-Compact garbage collector (GC). By separating short-lived objects from stable, long-lived ones, the system runs frequent, lightweight "young-generation" sweeps rather than expensive full-heap scans, drastically reducing CPU usage, power drain, and UI stutter. Our testing has shown significant improvements in GC interference with application threads and a reduction in the maximum memory resident set size (RSS). ART improvements are also available to over a billion devices running Android 12 (API level 31) and higher through Google Play System updates.

Lock-Free MessageQueue

For apps targeting SDK 37 or higher, the core android.os.MessageQueue now implements a lock-free architecture, significantly reducing missed frames, improving app startup time, and radically improving the performance of busy queues in multithreaded scenarios. Note: This can break apps that use reflection on private MessageQueue fields and methods.  The peekWhen and poll APIs have been added to TestLooperManager for instrumentation testing without relying on MessageQueue internals.

Static final fields now truly final

Starting from Android 17, apps targeting SDK 37 or higher won’t be able to modify “static final” fields, allowing the runtime to apply performance optimizations more aggressively. An attempt to do so via reflection (or deep reflection) will lead to an IllegalAccessException being thrown. Modifying them via JNI’s SetStatic<Type>Field methods family will immediately crash the application.

Custom notification view restrictions

To reduce memory usage we are further restricting the size of custom notification views. This update closes a loophole that allows apps to bypass existing limits using URIs. This behavior is gated by the target SDK version and takes effect for apps targeting API 37 and higher.

Privacy & Security

Maintaining user trust is at the heart of the Android ecosystem. Android 17 introduces robust features that protect sensitive data while simplifying user experiences.

Privacy-preserving choices

Historically, apps required broad, permanent permissions to access information like contacts, precise location and media files. Android 17 continues the shift toward privacy-preserving choices that grant temporary, session-based access only to the data the user explicitly selects:

• System-Level Contact Picker: Utilizing ACTION_PICK_CONTACTS, apps can request temporary access only to specific fields (e.g., email or phone number) chosen by the user, eliminating the need for the broad READ_CONTACTS permission. It also fully supports work/personal profile separation.
• Customizable Photo Picker aspect ratio: UsingPhotoPickerUiCustomizationParams, you can customize the system photo picker to show thumbnails in portrait mode. This is perfect for apps that always display photos and videos in portrait such as video based social media apps.
• System-rendered Location Button: A new system-rendered location button that you can embed in your app grants precise location access for the current session only.
• EyeDropper API: A new system-level API, ACTION_OPEN_EYE_DROPPER, allows your app to create a system-powered eyedropper enabling the user to select color from any pixel on the display. This provides a secure, privacy-preserving color-picking experience that eliminates the need for broad, sensitive screen capture or media projection permissions.

val eyeDropperLauncher = registerForActivityResult(ActivityResultContracts.StartActivityForResult()) { result ->
   if (result.resultCode == Activity.RESULT_OK) {
       val color = result.data?.getIntExtra(Intent.EXTRA_COLOR, Color.BLACK)
       // Use the picked color in your app
   }
}
fun launchColorPicker() {
   val intent = Intent(Intent.ACTION_OPEN_EYE_DROPPER)
   eyeDropperLauncher.launch(intent)
}

Picking a color from anywhere on the screen with the system EyeDropper

Local network access

Apps targeting Android 17 now either require the ACCESS_LOCAL_NETWORK runtime permission or the use of system-mediated, privacy-preserving device pickers for local network communication, such as talking to smart home devices or casting receivers. Because ACCESS_LOCAL_NETWORK falls under the existing NEARBY_DEVICES permission group, users who have already granted other NEARBY_DEVICES permissions will not be prompted again.

SMS OTP protection

Android 17 expands SMS one-time-password (OTP) protection by delaying access to SMS messages for three hours:

• WebOTP Format: Delayed for all apps that are not the intended recipient (domain mismatch).
• Standard SMS OTP: Delayed for all apps targeting SDK 37+.
• Exemptions: Default SMS, assistant, and connected companion apps are exempt. Apps are strongly encouraged to migrate to the SMS Retriever or SMS User Consent APIs.

Post-Quantum Cryptography (PQC)

Android 17 is ready for the next generation of cryptographic security:

• Keystore Integration: Supported devices can generate ML-DSA (Module-Lattice-Based Digital Signature Algorithm) keys in secure hardware to produce quantum-safe signatures, exposed via standard JCA APIs.
• Hybrid APK Signing: Introducing the v3.2 APK Signature Scheme, which combines classical signatures with ML-DSA signatures to secure app delivery.

Safer native dynamic code loading 

Smarter password protection for physical inputs

With Android 17, we're making it safer to enter passwords, PINs, and other secrets when using a physical keyboard by no longer showing the last typed character by default.

Users can still easily customize these display settings to match their preferences (availability may vary by device manufacturer).

These enhanced privacy protections are automatically supported byAndroid's built-in SDK components and will be supported in Compose 1.12 for SecureTextFields.

Media and camera features that empower creators and delight users

Android 17 introduces new creator features that give access to pro-quality cameras and media, all while improving the experience for consumers.

• Eclipsa Video: HDR video standard built upon the SMPTE ST 2094-50 specification that introduces new metadata to help devices adapt content for their display headroom and ambient light conditions, as well as improve the simultaneous display of standard and HDR content.
• RAW14 image format: New support for the RAW14 image format provides a way for your professional camera app to capture the highest level of detail and color depth from compatible camera sensors.
• Vendor-defined camera extensions: Vendor-defined extensions enable hardware partners to define and implement custom camera extension modes, providing access to the best and latest camera features.
• Extended HE-AAC software encoder: A new system-provided Extended HE-AAC software encoder, supports both low and high bitrates using unified speech and audio coding, providing significantly better audio quality for voice messages in low-bandwidth conditions, including support for loudness metadata.
• Versatile Video Coding (H.266): Enables OEMs to add codec support by defining the video/vvc MIME type in MediaFormat, adding new VVC profiles in MediaCodecInfo, and integrating support into MediaExtractor.
• Camera device type: New APIs that query the underlying device type to identify if a camera is built-in hardware, an external USB webcam, or a virtual camera.
• Constant Quality for Video Recording: SetVideoEncodingQuality in MediaRecorder configures a constant quality (CQ) mode for video encoders to ensure uniform visual fidelity across the entire video.

Better support for hearing aids

• Bluetooth LE Audio hearing aid support: Android now includes a specific device category for Bluetooth Low Energy (BLE) Audio hearing aids with the new AudioDeviceInfo.TYPE_BLE_HEARING_AID constant, so your app can distinguish hearing aids from regular headsets to provide a tailored experience for users with assistive listening devices.
• Granular audio routing for hearing aids: Android 17 allows users to independently manage where specific system sounds are played. They can choose to route notifications, ringtones, and alarms to connected hearing aids or the device's built-in speaker, helping to avoid unwanted in-ear interruptions while maintaining a Bluetooth connection for hearing aid management apps.

CameraX and Media3

CameraX and Media3 have been updated for Android 17. They are there to do the heavy lifting, smoothing the rough edges of media development and simplifying building reliable camera capture, smooth media playback, and creative and complex editing experiences.

We've released an agent skill that can migrate legacy Android camera implementations (Camera1 or raw Camera2 APIs) to CameraX.

Note: You'll need to update your CameraX version to either 1.5.2 or 1.6.0+ to avoid a crash related to an added dynamic range mode on Android 17 devices.

Get your apps, libraries, tools, and game engines ready!

If you develop an Android SDK, library, tool, or game engine, it's critical to prepare any necessary updates now to prevent your downstream app and game developers from being blocked by compatibility issues and allow them to target the latest SDK features. Please let your downstream developers know if updates are needed to fully support Android 17.

Testing involves installing your production app or a test app making use of your library or engine using Google Play or other means onto a device or emulator running Android 17 Beta 4. Work through all your app's flows and look for functional or UI issues. Each release of Android contains platform changes that improve privacy, security, and overall user experience; review the app impacting behavior changes for apps running on and targeting Android 17 to focus your testing, including the following:

• Resizability on large screens: Once you target Android 17 (SDK 37), you can no longer opt out of maintaining orientation, resizability and aspect ratio constraints on large screens.
• Dynamic code loading: If your app targets SDK 37 or higher, the Safer Dynamic Code Loading (DCL) protection introduced in Android 14 for DEX and JAR files now extends to native libraries. All native files loaded using System.load() must be marked as read-only. Otherwise, the system throws UnsatisfiedLinkError.
• Enable CT by default: Certificate transparency (CT) is enabled by default. (On Android 16, CT is available but apps had to opt in.)
• Local network protections: Apps targeting SDK 37 or higher have local network access blocked by default. Switch to using privacy preserving pickers if possible, and use the new ACCESS_LOCAL_NETWORKpermission for broad, persistent access.
• Background audio hardening: Starting in Android 17, the audio framework enforces restrictions on background audio interactions including audio playback, audio focus requests, and volume change APIs. Based on your feedback, we’ve made some changes since beta 2, including targetSDK gating while-in-use FGS enforcement and exempting alarm audio. Full details available in the updated guidance.
• NPU access declaration: Apps targeting Android 17 that need to directly access the NPU must declare FEATURE_NEURAL_PROCESSING_UNIT in their manifest to avoid being blocked from accessing the NPU. This includes apps that use the LiteRT NPU delegate, vendor-specific SDKs, as well as the deprecated NNAPI.

Get started with Android 17

Your Pixel device should get Android 17 shortly if you haven't already been on the Android Beta. If you don’t have a Pixel device, you can use the 64-bit system images with the Android Emulator in Android Studio. If you are currently on Android 17 Beta 4.1 and have not yet taken an Android 17 QPR1 beta, you can opt out of the program and you will then be offered the release version of Android 17 over the air.

Getting the Android 17 beta on partner devices

Android 17 is available in beta on handset, tablet, and foldable form factors from partners including Honor, iQOO, Lenovo, OnePlus, OPPO, Realme, Sharp, vivo, and Xiaomi.

For the best development experience with Android 17, we recommend that you use the latest Canary build of Android Studio Quail. Once you’re set up, here are some of the things you should do:

Test your current app for compatibility, learn whether your app is affected by changes in Android 17, and install your app onto a device or Android Emulator running Android 17 and extensively test it.

Thank you again to everyone who participated in our Android developer preview and beta program. We're looking forward to seeing how your apps take advantage of the updates in Android 17, and have plans to bring you updates in a fast-paced release cadence going forward.

For complete information on Android 17 please visit the Android 17 developer site.

Welcome back to the blog post series "Build intelligent Android apps" where we take a basic Android app and transform it into a personalized, intelligent, and agentic experience. In our previous post we explored how to build intelligent on-device features using Gemini Nano through ML Kit's Prompt API.

In this post, we will look at how you can leverage Firebase AI Logic to build cloud-hosted and hybrid AI features: 

• Grounding answers in real-world context
• Routing requests dynamically between cloud and local execution using hybrid inference
• Translating content with custom routing systems

Sometimes a use case requires AI models with greater world knowledge, a much larger context window, or the ability to handle complex queries. In those scenarios, we can leverage cloud models. 

Other times, you want the best of both worlds: using hybrid inference to run on-device when available to lower costs, while falling back to the cloud to ensure compatibility for all devices.

Cloud and hybrid features in Jetpacker: Museum assistant with web grounding, hybrid restaurant review drafting, and  support chat featuring custom-routed live translation.

Let’s look at how we implemented three cloud and hybrid features in Jetpacker:

• a museum assistant with web grounding
• hybrid restaurant review drafting
• hotel support chat featuring custom-routed live translation.

Use LLM grounding for up-to-date informationMuseum assistant chatbot with LLM grounding

The Museum assistant is an interactive chatbot designed to help users plan their museum visits. It provides visitors with up-to-date details regarding specific exhibits, current opening hours, ticket pricing, and more.

Museum assistant is a chatbot that answers questions, such as 

When building AI features, getting the model to answer with fresh, accurate, and specific real-world information is a common challenge. While cloud models possess massive amounts of world knowledge, they might not know about seasonal exhibits or the current day’s opening hours. 

Grounding data is added to the context window to enable the model

To bridge this gap, we can use grounding techniques to add extra context to the model’s context window. The Firebase AI Logic SDK supports three types of grounding:

• URL grounding: Grounding responses using content from a specific webpage (e.g. current ticket prices or museum rules).
• Google Search grounding: Letting the model query the real-time Google search index for up-to-date details.
• Maps grounding: Using Google Maps location data.

In Jetpacker, we dynamically construct the available tools based on enabled feature flags and initialize the generative model using the Firebase AI SDK:

// implementation("com.google.firebase:firebase-ai-logic")

private var toolList = mutableListOf<Tool>()

init {
    if (ENABLE_SEARCH_GROUNDING) {
        toolList.add(Tool.googleSearch())
    }
    if (ENABLE_URL_GROUNDING) {
        toolList.add(Tool.urlContext())
    }
}

private val generativeModel = Firebase.ai(backend = GenerativeBackend.googleAI())
    .generativeModel(
        modelName = "gemini-3-flash",
        systemInstruction = content {
            text("You are a helpful museum assistant answering questions about a museum. Use plain text.")
        },
        tools = toolList
    )

When the user queries the assistant, if URL grounding is enabled, we append the specific museum resource URLs directly into the prompt:

val groundingText = if (FeatureFlags.ENABLE_URL_GROUNDING) {
    "\n If the following message above is about the rules and terms to visit Le Louvre, " +
    "if needed answer this urls ${urlList.joinToString()}"
} else {
    ""
}

val prompt = "$text $groundingText"

var response = chat.sendMessage(prompt)

Hybrid inference: On-device review generation with Maps deep link

Not every AI task requires a cloud-based model, and not every device is online. To help developers balance latency, cost, and offline availability, we recently introduced the Firebase API for Hybrid Inference.

In Jetpacker, the restaurant review feature lets users review select topics and automatically drafts a review. To enable this for all users, we prioritize local execution with Gemini Nano, and fall back to cloud models on devices that don’t support Gemini Nano. 

// implementation("com.google.firebase:firebase-ai-logic")
// implementation("com.google.firebase:firebase-ai-ondevice:16.0.0-beta03")


// Initialize the model with hybrid routing configuration
val reviewModel = Firebase.ai.generativeModel(
    modelName = "gemini-3.1-flash-lite",
    onDeviceConfig = OnDeviceConfig(
        inferenceMode = InferenceMode.PREFER_ON_DEVICE
    )
)

The Hybrid Inference API supports four distinct routing modes:

• PREFER_ON_DEVICE: Prioritizes local execution and falls back to cloud if Gemini Nano is unavailable.
• PREFER_IN_CLOUD: Prioritizes cloud execution and falls back to on-device if the device goes offline.
• ONLY_ON_DEVICE: Restricts execution strictly to the device.
• ONLY_IN_CLOUD: Restricts execution strictly to the cloud.

Once the review is generated, we copy it to the clipboard and use an intent to open Google Maps directly to the restaurant's review page, providing a seamless user experience:

private fun copyAndOpenMapsReview(context: Context, reviewText: String, placeId: String) {
    val clipboard = context.getSystemService(Context.CLIPBOARD_SERVICE) as ClipboardManager
    val clip = ClipData.newPlainText("User Review", reviewText)
    clipboard.setPrimaryClip(clip)

    val uri = Uri.parse("https://search.google.com/local/writereview/mobile?placeid=$placeId")
    val intent = Intent(Intent.ACTION_VIEW, uri).apply {
        setPackage("com.google.android.apps.maps")
    }
    context.startActivity(intent)
}

Custom hybrid routing: Hotel support chat translation with simulated personas

The hotel support chat was built to let users finalize logistics and check on hotel details. This feature uses system instructions to configure a localized receptionist assistant. By passing specific information—such as the preferred language and hotel information—in the instructions, we can set up a conversational persona representing a specific hotel.

private val generativeModel = Firebase.ai(backend = GenerativeBackend.googleAI())
    .generativeModel(
        systemInstruction = content {
            text("""
              You are a helpful hotel receptionist at $hotelName only speaking $language. 
              Answer politely in $language. The bar closes at 10pm and breakfast is from 7am to 10am.
              There's someone at the desk 24/7. You can retrieve your luggage from the storage room 
              at the back of the lobby at any time.
              """)
        },
        modelName = "gemini-3-flash-preview"
    )

Because receptionist responses are in the hotel's local language (for example, French for Hotel Le Meurice in Paris), we need to translate messages to the user’s preferred language. 

Hotel support chat messages are automatically translated to the user’s preferred language 

While hybrid models can configure simple routing preferences, complex scenarios require custom routing logic. In Jetpacker, we implement a custom routing stack that takes into account:

• Language identification: Using the on-device ML Kit Language Identification API, we can detect the incoming message language.
• On-device translation (Gemini Nano): ML Kit’s Prompt API lets us translate common language pairs directly on the device, saving bandwidth and cloud cost.
• Cloud translation (Gemini 3 Flash): For more complex languages, we use Gemini Flash 3 to get a higher quality translation.

// implementation("com.google.android.gms:play-services-mlkit-language-id:17.0.0") 

// ML Kit for Language Identification (powered by Google Play Services)
private val languageIdentifier = LanguageIdentification.getClient()

// On-device translator model (prefer Gemini Nano) for translating common language pairs
private val hybridTranslationModel = Firebase.ai(backend = GenerativeBackend.googleAI())
    .generativeModel(
        modelName = "gemini-3-flash",
        onDeviceConfig = OnDeviceConfig(mode = InferenceMode.PREFER_ON_DEVICE)
    )

// Cloud translator model for more complex language pairs
private val cloudTranslationModel = Firebase.ai(backend = GenerativeBackend.googleAI())
    .generativeModel(
        modelName = "gemini-3-flash"
    )

When a message needs to be translated, we identify the source language and apply our custom routing logic, executing either on-device or cloud translation:

fun translateMessage(message: SupportChatMessage) {
    viewModelScope.launch {
        // 1. Detect language using ML Kit Language Identification
        val sourceLang = try {
            Tasks.await(languageIdentifier.identifyLanguage(message.text))
        } catch (e: Exception) {
            "Undefined"
        }

        // 2. Custom routing: we've verified the translation quality for English and Korean with Gemini Nano, and will translate message on-device for those two languages
        val routeToCloud = sourceLang != "en" && sourceLang != "kr"

        val prompt = "Translate the following text to $selectedLanguage. Just return the translated sentence: ${message.text}."

        val (translatedText, routePrefix) = if (routeToCloud) {
            val result = cloudTranslationModel.generateContent(prompt)
            result.text to "[Cloud]"
        } else {
            val result = hybridTranslationModel.generateContent(prompt)
            result.text to "[On-Device]"
        }

        if (translatedText != null) {
            _translations.update { current ->
                current + (message.id to "$routePrefix: $translatedText")
            }
        }
    }
}

In this example, the custom routing logic only takes into consideration the translation’s source and target language. However, based on your app’s use case, you can expand the routing logic to include other factors such as the on-device model version, network connectivity, battery status, and more.

Securing the AI Pipelines: Firebase App Check

Lastly, using AI in the cloud opens up possibilities of API key abuse or unauthorized billing. To secure API calls, we integrated Firebase App Check using both Play Integrity (production) and the local Debug Provider (for local development or emulators).

In the JetPackerApplication.kt file, we install the debug provider at startup and trigger anonymous authentication to establish a secure user session:

//  implementation("com.google.firebase:firebase-appcheck-playintegrity") 
//  implementation("com.google.firebase:firebase-appcheck-debug")  
//  implementation("com.google.firebase:firebase-auth") 

override fun onCreate() {
    super.onCreate()
    Firebase.initialize(context = this)
    Firebase.appCheck.installAppCheckProviderFactory(
        DebugAppCheckProviderFactory.getInstance()
    )
    Firebase.auth.signInAnonymously()
}

When building locally on an emulator, App Check prints a local token secret to logcat:

Enter this debug secret into the allow list in the Firebase Console: a8c2dd4c-xxxx-xxxx-xxxx-ef6c114ba27e

Once registered in the Firebase console, local requests are fully verified and authenticated by App Check, protecting our backend while letting us test the app locally.

Conclusion

By combining cloud model capabilities (grounding, system instructions) with on-device capabilities (hybrid routing, translation, security app checks), we created a travel app that is smart, secure, and available offline.

Check out the full source code for Jetpacker on GitHub, and explore the Firebase documentation to get started:

Firebase AI Logic Documentation
Firebase Hybrid Inference API

Learn more

Check out the other parts of this blog post series:

Part 1: Introduction of the app and a high-level overview.
Part 2: On-device intelligence. Deep-dive into ML Kit’s GenAI APIs and Gemini Nano to build privacy-first features like itinerary summarization, receipt parsing, and local audio processing.
Part 3 (this post!): Hybrid and cloud reasoning. Explore how to use Firebase AI Logic to ground LLM answers in real-world data like Google Maps and web context.
Part 4: System integration. Integrating with the Android intelligence system using AppFunctions. 
Part 5 (coming soon): In-app agentic workflows. Extend the app with an end-to-end booking assistant powered by A2UI and ADK.

Interested in more on Android Development? Follow Android Developers on YouTube or LinkedIn!

All code snippets in this blog post follow the following copyright notice:

Copyright 2026 Google LLC.
SPDX-License-Identifier: Apache-2.0

The Cybersecurity and Infrastructure Security Agency (CISA) is releasing this advisory in response to ransomware actors leveraging unpatched instances of a vulnerability in SimpleHelp Remote Monitoring and Management (RMM) to compromise customers of a utility billing software provider. This incident reflects a broader pattern of ransomware actors targeting organizations through unpatched versions of SimpleHelp RMM since January 2025.

SimpleHelp versions 5.5.7 and earlier contain several vulnerabilities, including CVE-2024-57727—a path traversal vulnerability.¹ Ransomware actors likely leveraged CVE-2024-57727 to access downstream customers’ unpatched SimpleHelp RMM for disruption of services in double extortion compromises.¹ 

CISA added CVE-2024-57727 to its Known Exploited Vulnerabilities (KEV) Catalog on Feb. 13, 2025.

CISA urges software vendors, downstream customers, and end users to immediately implement the Mitigations listed in this advisory based on confirmed compromise or risk of compromise.

Download the PDF version of this report:

Mitigations

CISA recommends organizations implement the mitigations below to respond to emerging ransomware activity exploiting SimpleHelp software. These mitigations align with the Cross-Sector Cybersecurity Performance Goals (CPGs) developed by CISA and the National Institute of Standards and Technology (NIST). The CPGs provide a minimum set of practices and protections that CISA and NIST recommend all organizations implement. CISA and NIST based the CPGs on existing cybersecurity frameworks and guidance to protect against the most common and impactful threats, tactics, techniques, and procedures. Visit CISA’s CPGs webpage for more information on the CPGs, including additional recommended baseline protections. These mitigations apply to all critical infrastructure organizations.

Vulnerable Third-Party Vendors

If SimpleHelp is embedded or bundled in vendor-owned software or if a third-party service provider leverages SimpleHelp on a downstream customer’s network, then identify the SimpleHelp server version at the top of the file <file_path>/SimpleHelp/configuration/serverconfig.xml. If version 5.5.7 or prior is found or has been used since January 2025, third-party vendors should:

1. Isolate the SimpleHelp server instance from the internet or stop the server process.
2. Upgrade immediately to the latest SimpleHelp version in accordance with SimpleHelp’s security vulnerability advisory.²
3. Contact your downstream customers to direct them to take actions to secure their endpoints and undertake threat hunting actions on their network.

Vulnerable Downstream Customers and End Users

Determine if the system is running an unpatched version of SimpleHelp RMM either directly or embedded in third-party software.

SimpleHelp Endpoints

Determine if an endpoint is running the remote access (RAS) service by checking the following paths depending on the specific environment:

• Windows: %APPDATA%\JWrapper-Remote Access
• Linux: /opt/JWrapper-Remote Access
• MacOs: /Library/Application Support/JWrapper-Remote Access

If RAS installation is present and running, open the serviceconfig.xml file in <file_path>/JWrapper-Remote Access/JWAppsSharedConfig/ to determine if the registered service is vulnerable. The lines starting with <ConnectTo indicate the server addresses where the service is registered.

SimpleHelp Server

Determine the version of any SimpleHelp server by performing an HTTP query against it. Add /allversions (e.g., https://simple-help.com/allversions) to query the URL for the version page. This page will list the running version.

If an unpatched SimpleHelp version 5.5.7 or earlier is confirmed on a system, organizations should conduct threat hunting actions for evidence of compromise and continuously monitor for unusual inbound and outbound traffic from the SimpleHelp server. Note: This is not an exhaustive list of indicators of compromise.

1.  Refer to SimpleHelp’s guidance to determine compromise and next steps.³
2. Isolate the SimpleHelp server instance from the internet or stop the server process.
3. Search for any suspicious or anomalous executables with three alphabetic letter filenames (e.g., aaa.exe, bbb.exe, etc.) with a creation time after January 2025. Additionally, perform host and network vulnerability security scans via reputable scanning services to verify malware is not on the system.
4. Even if there is no evidence of compromise, users should immediately upgrade to the latest SimpleHelp version in accordance with SimpleHelp’s security vulnerabilities advisory.⁴

If your organization is unable to immediately identify and patch vulnerable versions of SimpleHelp, apply appropriate workarounds. In this circumstance, CISA recommends using other vendor-provided mitigations when available. These non-patching workarounds should not be considered permanent fixes and organizations should apply the appropriate patch as soon as it is made available.

Encrypted Downstream Customers and End Users

If a system has been encrypted by ransomware:

1. Disconnect the affected system from the internet.
2. Use clean installation media (e.g., a bootable USD drive or DVD) to reinstall the operating system. Ensure the installation media is free from malware.
3. Wipe the system and only restore data from a clean backup. Ensure data files are obtained from a protected environment to avoid reintroducing ransomware to the system.

CISA urges you to promptly report ransomware incidents to a local FBI Field Office, FBI’s Internet Crime Compliant Center (IC3), and CISA via CISA’s 24/7 Operations Center (report@cisa.gov or 1-844-Say-CISA).

Proactive Mitigations to Reduce Risk

To reduce opportunities for intrusion and to strengthen response to ransomware activity, CISA recommends customers of vendors and managed service providers (MSPs) implement the following best practices:

• Maintain a robust asset inventory and hardware list [CPG 1.A].
• Maintain a clean, offline backup of the system to ensure encryption will not occur once reverted. Conduct a daily system backup on a separate, offline device, such as a flash drive or external hard drive. Remove the device from the computer after backup is complete [CPG 2.R].
• Do not expose remote services such as Remote Desktop Protocol (RDP) on the web. If these services must be exposed, apply appropriate compensating controls to prevent common forms of abuse and exploitation. Disable unnecessary OS applications and network protocols on internet-facing assets [CPG 2.W].
• Conduct a risk analysis for RMM software on the network. If RMM is required, ask third-party vendors what security controls are in place.
• Establish and maintain open communication channels with third-party vendors to stay informed about their patch management process.
• For software vendors, consider integrating a Software Bill of Materials (SBOM) into products to reduce the amount of time for vulnerability remediation.
  • An SBOM is a formal record of components used to build software. SBOMs enhance supply chain risk management by quickly identifying and avoiding known vulnerabilities, identifying security requirements, and managing mitigations for vulnerabilities. For more information, see CISA’s SBOM page.

Resources

• Health-ISAC:Threat Bulletin: SimpleHelp RMM Software Leveraged in Exploitation Attempt to Breach Networks
• Arctic Wolf: Arctic Wolf Observes Campaign Exploiting SimpleHelp RMM Software for Initial Access
• CISA: #StopRansomware Guide

Reporting

Your organization has no obligation to respond or provide information back to FBI in response to this advisory. If, after reviewing the information provided, your organization decides to provide information to FBI, reporting must be consistent with applicable state and federal laws.

FBI is interested in any information that can be shared, to include boundary logs showing communication to and from foreign IP addresses, a sample ransom note, communications with threat actors, Bitcoin wallet information, decryptor files, and/or a benign sample of an encrypted file.

Additional details of interest include a targeted company point of contact, status and scope of infection, estimated loss, operational impact, transaction IDs, date of infection, date detected, initial attack vector, and host- and network-based indicators.

CISA and FBI do not encourage paying ransom as payment does not guarantee victim files will be recovered. Furthermore, payment may also embolden adversaries to target additional organizations, encourage other criminal actors to engage in the distribution of ransomware, and/or fund illicit activities. Regardless of whether you or your organization have decided to pay the ransom, FBI and CISA urge you to promptly report ransomware incidents to FBI’s Internet Crime Complain Center (IC3), a local FBI Field Office, or CISA via the agency’s Incident Reporting System or its 24/7 Operations Center (report@cisa.gov) or by calling 1-844-Say-CISA (1-844-729-2472).

SimpleHelp users or vendors can contact support@simple-help.com for assistance with queries or concerns.

Disclaimer

The information in this report is being provided “as is” for informational purposes only. CISA does not endorse any commercial entity, product, company, or service, including any entities, products, or services linked within this document. Any reference to specific commercial entities, products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply endorsement, recommendation, or favor by CISA.

Version History

June 12, 2025: Initial version.

Notes

1. Anthony Bradshaw, et. al., “DragonForce Actors Target SimpleHelp Vulnerabilities to Attack MSP, Customers,” Sophos News, May 27, 2025, https://news.sophos.com/en-us/2025/05/27/dragonforce-actors-target-simplehelp-vulnerabilities-to-attack-msp-customers/.
2. For instructions for upgrading to the latest version of SimpleHelp, see SimpleHelp’s security vulnerability advisory.
3. To determine possibility of compromise and next steps, see SimpleHelp’s guidance.
4. For instructions for upgrading to the latest version of SimpleHelp, see SimpleHelp’s security vulnerability advisory.

Introduction

Note: This advisory was originally published on April 7, 2026, to provide tactics, techniques, and procedures (TTPs) and indicators of compromise (IOCs) related to ongoing cyber exploitation of internet-connected operational technology (OT) devices by Iranian-affiliated advanced persistent threat (APT) actors. The authoring agencies updated this advisory on July 22, 2026, to add new guidance on detecting malicious changes in reusable code modules leveraged within Rockwell Automation PLC programs. It also expands the manufacturer scope to include observed targeting of Schneider Electric, Siemens, and potentially other branded/manufactured PLCs, emphasizing the importance of restricting direct internet access and providing best practice resources for secure deployment.

The Federal Bureau of Investigation (FBI), Cybersecurity and Infrastructure Security Agency (CISA), National Security Agency (NSA), Environmental Protection Agency (EPA), Department of Energy (DOE), United States Cyber Command – Cyber National Mission Force (CNMF), and Department of the Treasury (Treasury) (hereafter referred to as the “authoring agencies”) are urgently warning U.S. organizations of ongoing cyber exploitation of internet-connected OT devices—including PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, Siemens, and potentially other manufactured PLCs—across multiple U.S. critical infrastructure sectors. As a result of this activity, organizations from multiple U.S. critical infrastructure sectors experienced disruptions through malicious interactions with PLC project files¹ and the manipulation of data displayed on human machine interface (HMI) and supervisory control and data acquisition (SCADA) displays. In a few cases, this activity caused operational disruption and financial loss.

The authoring agencies assess a group of Iranian-affiliated APT actors is conducting this activity to cause disruptive effects within the United States. The group targeted devices spanning multiple U.S. critical infrastructure sectors, including Government Services and Facilities (to include local municipalities), Water and Wastewater Systems (WWS), and Energy Sectors. The authoring agencies previously reported on similar activity targeting PLCs by CyberAv3ngers (aka Shahid Kaveh Group)—a cyber threat actor affiliated with Iran’s Islamic Revolutionary Guard Corps (IRGC) Cyber Electronic Command (CEC).

Due to the widespread use of these PLCs, and the potential for additional targeting of other branded OT devices across critical infrastructure, the authoring agencies recommend U.S. organizations urgently review the TTPs and IOCs in this advisory for indications of current or historical activity on their networks, and apply the recommendations listed in the Mitigations section of this advisory to reduce the risk of compromise.

If owners and operators discover an affected internet-accessible device in their environment, additional technical measures may be necessary to evaluate the risk of compromise. Please engage your cyber incident response plans and contact the authoring agencies and applicable vendors through existing support channels available to customers and integrators (see Contact Information) to receive support, mitigation, and investigation assistance.

For more information on Iranian malicious cyber activity, see CISA’s Iran Threat Overview and Advisories webpage and the FBI’s Iran Threat and Iran Cyber Threat Overview webpages.

Download the PDF version of this report:

(New, July 22, 2026) For a downloadable copy of July 22, 2026 IOCs, see:

• AA26-097A STIX XML (XML, 29 KB)
• AA26-097A STIX JSON (JSON, 30 KB)

For a downloadable copy of historical April 7, 2026 IOCs, see:

Background Information

Similar Historical Activity Targeting Programmable Logic Controllers

During a similar campaign beginning in November 2023, the IRGC CEC-affiliated cyber threat actors known as "CyberAv3ngers” targeted U.S.-based PLCs and HMIs, causing disruptive effects. Private industry and open sources also refer to this group as Hydro Kitten, Storm-0784, APT Iran, Bauxite, Mr. Soul, Soldiers of Solomon, UNC5691, and the Shahid Kaveh Group. These attacks compromised at least 75 devices, targeting U.S.-based Unitronics PLC devices with an HMI used across multiple critical infrastructure sectors, including the WWS. APT actors developed and deployed custom ladder logic code to these devices, replacing the valid ladder logic with malicious code that continues to be observed to date.

For more information on this group’s activity, see the joint Cybersecurity Advisory IRGC-Affiliated Cyber Actors Exploit PLCs in Multiple Sectors, Including US Water and Wastewater Systems Facilities.

Ongoing Threat Actor Activity Against U.S.-Based Programmable Logic Controllers

The FBI observed Iranian-affiliated APT actors targeting internet-exposed PLCs with the intent to cause disruptions—including maliciously interacting with project files, and manipulating data displayed on HMI and SCADA displays—to U.S. critical infrastructure organizations. Iranian-affiliated APT targeting campaigns against U.S. critical infrastructure have recently escalated, likely in response to hostilities between Iran, and the United States and Israel.

(New, July 22, 2026) At one U.S. victim, the FBI observed the APT actors download a malicious project file to a targeted PLC using configuration software. Analysis indicated the project file retained ladder logic for downstream function but added logic that overrode specific instruction sets responsible for maintaining safe operating parameters in the victim’s environment.

Since at least March 2026, the authoring agencies identified (through engagements with victim organizations) an Iranian-affiliated APT group disrupted the function of PLCs. Organizations across several U.S. critical infrastructure sectors (including Government Services and Facilities, WWS, and Energy Sectors) deployed these PLCs within a wide variety of industrial automation processes. Some of the victims experienced operational disruption and financial loss.

Technical Details

Note: This advisory uses the MITRE ATT&CK^® Matrix for Enterprise framework, version 19. See the MITRE ATT&CK Tactics and Techniques section of this advisory for tables of the threat actors’ activity mapped to MITRE ATT&CK tactics and techniques.

Initial Access

(Updated, July 22, 2026) The authoring agencies observed Iranian-affiliated APT actors using several foreign-based IP addresses to access internet-facing PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, Siemens, and potentially other manufactured PLCs [T0883]. The actors used leased, third-party hosted infrastructure and manufacturers’ PLC programming software to connect to misconfigured victim PLCs. Inbound malicious traffic has been observed targeting PLC devices on the following ports: 44818, 2222, 102, and 502, as well as targeting modems on port 22. Targeted devices include:

• Rockwell Automation: CompactLogix and Micro850 PLCs
• Schneider Electric: BMX P34/Modicon M340 PLCs
• Siemens: S7-1200 series PLCs

Command and Control

(Updated, July 22, 2026) The targeting of ports [T0885] associated with other OT vendors’ protocols suggests these actors are opportunistically targeting devices manufactured by companies other than Rockwell Automation/Allen-Bradley, including Schneider Electric and Siemens. In one reported instance, the actors utilized Dropbear Secure Shell (SSH) software on victim modems to enable them to gain remote access through port 22 [T1219].

Exfiltration

(New, July 22, 2026) The authoring agencies observed Iranian-affiliated APT actors using configuration software—such as Rockwell Automation’s Studio 5000 Logix Designer, Schneider Electric’s EcoStruxure Control Expert, and Siemens’ Totally Integrated Automation (TIA) Portal—on leased, third-party hosted infrastructure to exfiltrate device project files from PLC devices to threat-actor-controlled infrastructure [T1041].

Impact

(Updated, July 22, 2026) After the actors extracted device project files, the FBI and CISA identified the modification and deletion of project file logic, to include Add-On Instructions (AOIs) and data manipulation on HMI and SCADA displays [T1565]. Additionally, the changes disabled critical shutdown and alarm logic, allowing systems to enter unsafe conditions without notifying operators of the anomalies.

Note: An AOI is analogous to a “Function Block” or “User Defined Function Block” used in other PLC vendor programs.

Indicators of Compromise

See Table 1 and Table 2 for recent IP addresses used by the Iranian-affiliated APT actors to communicate with PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, and Siemens in the United States.

Disclaimer: The FBI observed the threat actors using the IP addresses listed below in the specified time frames. This data is being provided for customers to query against logs for indications of historical targeting by the Iranian-affiliated APT actors. The authoring agencies recommend organizations investigate or vet these IP addresses prior to taking action, such as blocking.

MITRE ATT&CK Tactics and Techniques

See Table 3 to Table 6 for all referenced threat actor tactics and techniques in this advisory. The authoring agencies recommend organizations review historical TTPs for similar Iranian-affiliated cyber actor activity in IRGC-Affiliated Cyber Actors Exploit PLCs in Multiple Sectors, Including US Water and Wastewater Systems Facilities. For assistance with mapping malicious cyber activity to the MITRE ATT&CK framework, see CISA and MITRE ATT&CK’s Best Practices for MITRE ATT&CK Mapping and CISA’s Decider Tool.

Mitigations

The authoring agencies recommend organizations implement the mitigations below to improve your organization’s cybersecurity posture on the basis of the threat actors’ activity. These mitigations align with the Cross-Sector Cybersecurity Performance Goals (CPGs) developed by CISA and the National Institute of Standards and Technology (NIST). The CPGs provide a minimum set of practices and protections that CISA and NIST recommend all organizations implement. CISA and NIST based the CPGs on existing cybersecurity frameworks and guidance to protect against the most common and impactful threats and TTPs. Visit CISA’s CPGs webpage for more information on the CPGs, including additional recommended baseline protections.

Network Defenders

The cyber threat actors accessed PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, Siemens, and potentially other branded/manufactured PLCs to cause disruptions to victim systems. To safeguard against this threat and threats to other types of PLCs, the authoring agencies urge organizations to consider the following mitigations.

(Updated, July 22, 2026) In addition to contacting the authoring agencies, organizations and integrators operating PLCs from the manufacturers mentioned in this advisory should review the previously issued guidance to strengthen the security of their OT deployments:

• Rockwell Automation: Contact the Rockwell Automation Product Security Incident Response Team (PSIRT) at PSIRT@rockwellautomation.com for questions regarding this guidance, or to report cyber incidents related to Rockwell Automation products.
  
  • Refer to Rockwell Automation Security Advisory SD1771 for recommended PLC hardening measures and configuration guidance.
• Schneider Electric: Contact the Schneider Electric Corporate Product Cyber Emergency Response Team (CPCERT) at cpcert@se.com for questions regarding this guidance, or to report cyber incidents related to Schneider Electric products.
  
  • Refer to Schneider Electric’s Recommended Cybersecurity Best Practices and Cybersecurity User Guide for Modicon Controller Platform for guidance on securing and configuring PLCs.
• Siemens: Contact Siemens ProductCERT at productcert@siemens.com for questions regarding this guidance, or to report cyber incidents and vulnerabilities related to Siemens products.
  
  • Refer to Siemens Security Bulletin 104599 for a list of security measures to harden PLCs and in-depth configuration guides.
  • Siemens users should review the Cybersecurity for Industry Operational Guidelines and implement defense-in-depth controls within their automation systems.

Immediate steps to prevent the attack:

• Disconnect the PLC from the public-facing internet [CPG 3.S]. Follow the joint guidance Secure connectivity principles for OT to safely allow remote access. Specifically, “remove inbound port exposure,” so the OT system is never directly exposed to the internet or external networks, and to ensure all access is mediated, monitored, and controlled. Do this through a secure gateway (jump host) that brokers the connection.
  
  • Ensure cellular modems, used for remote field connectivity and access, are secured with strong authentication and updated.
  • Enable logs for connected modems and regularly review for suspicious activity to detect intrusions and improve incident response speed.
  • (New, July 22, 2026) To mitigate unauthorized access to OT via cellular modems, organizations should consider implementing isolated architectures, such as private Access Point Name (APN), 5G Public Network Integrated Non-Public Network (PNI-NPN), cellular Software-Defined Wide Area Network (SD-WAN), Zero Trust Network Access (ZTNA), or a site-to-site virtual private network (VPN).
• (New, July 22, 2026) Strictly control network access to PLC devices.
  
  • Configure firewall rules or access control list (ACL) security features on PLCs or programmable controllers to allow only authorized communications between expected control system devices. Block access from unauthorized or threat actor-controlled IP addresses, such as those associated with hosting providers.
• For controllers with a physical mode switch, place the physical mode switch into run position to prevent remote modification. Devices should only be in the program or remote position when updating or downloading software online and immediately switched back to the run position when complete. (See Rockwell Automation’s² System Security Design Guidelines for manufacturer’s instructions.)
  
  • (New, July 22, 2026) Prior to switching the device to run mode, review and validate project files, as changing modes will lock in the current project file downloaded to the device.
• For devices that allow software key switching, enable programming protection in PLC configuration software (S7 TIA Portal) to limit who can modify PLCs remotely. (See Siemens’ Cybersecurity for Industry Operational Guidelines for the manufacturer’s instructions.)

Follow-up steps to strengthen security posture:

• (New, July 22, 2026) Review project files running on PLCs for unauthorized changes. Use vendor-provided integrity checking tools and visually compare the running program to known good logic. Ensure reusable logic and input/output configurations are valid. For Rockwell Automation PLCs listed in the Customer Guidance to Disconnect Devices from the Internet, check the AOIs for any anomalous modifications.
  
  • If restoring from backups, verify the backup does not contain malicious logic before deployment.
  • Review logs and configurations on all connected devices, including modems, HMIs, and workstations, to assess potential lateral movement by threat actors. If it appears the actors connected to additional devices, reimage these devices to remove any potential malicious changes or access tools.
• (New, July 22, 2026) Ensure device passwords are changed from their default and are configured to use complex, unique combinations of letters, numbers, and symbols that are not easily guessable. Implementing robust password practices remains a critical security measure that can help prevent unauthorized access and strengthen the overall security posture of OT devices.
• (New, July 22, 2026) Take defensive measures to minimize the risk of exploitation. Conduct comprehensive impact analysis and risk assessments prior to deploying defensive measures.
• Create and test strong backups of the logic and configurations of PLCs. Store backup files offline and secure the physical removal media to enable fast recovery.
• Implement multifactor authentication (MFA) [CPG 3.F] for access to the OT network from an external network.
• If remote access is required, implement a network proxy, gateway, firewall, and/or VPN in front of the PLC to control network access.
  
  • A VPN or gateway device can enable MFA for remote access even if the PLC does not support MFA. Implement security rules on these higher-level network security mechanisms to prevent the type of repeated and sustained login attempts seen during a brute force attack. When possible, implement a device control list for workstations sending messages or connecting to OT components.
  • Use the device control list to monitor for logon activity for unexpected or unusual access to devices from the internet.
• Keep PLC devices updated with the latest software patches issued by the manufacturer. Use established downtime windows to install patches. Known Exploited Vulnerabilities may need to be prioritized outside a downtime window.
• Configure external and internal firewalls to block traffic using common ports associated with network protocols that are unnecessary for the particular network segment.
• Disable any unused authentication methods, logic, or features, such as default authentication keys and passwords, as well as unused or needed services such as Teletype Network (Telnet), File Transfer Protocol (FTP), Remote Desktop Protocol (RDP), Virtual Network Computing (VNC), and web services.
• Monitor asset management systems for device configuration changes, which can be used to understand expected parameter settings.
• Monitor the content of network traffic for the following:
  
  • Unusual logins to internet-connected devices or unexpected protocols to/from the internet. 
  • Functions of industrial control systems management protocols that change an asset’s operating mode or modify programs.
• (New, July 22, 2026) Ensure service providers are informed of active threats targeting internet-connected PLC devices. Owners and operators should communicate directly with service providers to address risks, especially when remote monitoring or maintenance is involved. Some service providers may rely on internet connectivity essential to monitor and maintain OT/ICS operations but may not be fully aware of active threats.

In addition, the authoring agencies recommend network defenders apply the following mitigations to limit potential adversarial use of common system and network discovery techniques, as well as reduce the impact and risk of compromise by cyber threat actors:

• Reduce risk exposure. CISA offers a range of services at no cost, including scanning and testing, to help organizations reduce exposure to threats via mitigating attack vectors. CISA’s Cyber Hygiene Services can help provide additional review of organizations’ internet-accessible assets. 

Device Manufacturers

Note: The following guidance is general in nature and not specific to any OT vendor. Some of the features, settings, and practices may already be offered by certain vendors. The inclusion of this guidance should not be interpreted as an assertion that vendors referenced do not offer such security features. Also, this advisory is not highlighting a new vulnerability in the identified products, but instead discusses opportunistic targeting. Device manufacturers can make opportunistic attacks more difficult at scale by encouraging more secure behavior by default and in operations, as discussed below. 

Although critical infrastructure organizations using PLC devices can take steps to mitigate the risks, it is ultimately the responsibility of the device manufacturer to build products secured by design and default. The authoring agencies urge device manufacturers to take ownership of their customers’ security outcomes by following the principles in the joint guide Secure by Demand: Priority Considerations for OT Owners and Operators when Selecting Digital Products, primarily:

• Change the manufacturers’ default settings to prevent exposing administrative interfaces to the internet.
• Do not charge additional fees for basic security features needed to operate the product securely.
• Support MFA, including via phishing-resistant methods.

By using secure by design tactics, software manufacturers can make product lines secure “out of the box” without requiring customers to spend additional resources making configuration changes, purchasing tiered security software and logs, monitoring, and making routine updates.

For more information on common misconfigurations and guidance on reducing their prevalence, see joint advisory NSA and CISA Red and Blue Teams Share Top Ten Cybersecurity Misconfigurations. For more information on secure by design, see CISA’s Secure by Design webpage and joint guide.

Validate Security Controls

In addition to applying mitigations, the authoring agencies recommend exercising, testing, and validating your organization's security program against the threat behaviors mapped to the MITRE ATT&CK for Enterprise framework in this advisory. The authoring agencies recommend testing your existing security controls inventory to assess how they perform against the ATT&CK techniques described in this advisory.

To get started:

1. Select an ATT&CK technique described in this advisory (see Table 3 to Table 6).
2. Align your security technologies against the technique.
3. Test your technologies against the technique.
4. Analyze your detection and prevention technologies’ performance.
5. Repeat the process for all security technologies to obtain a set of comprehensive performance data.
6. Tune your security program, including people, processes, and technologies, based on the data generated by this process.

The authoring agencies recommend continually testing your security program, at scale, in a production environment to ensure optimal performance against the ATT&CK techniques identified in this advisory.

Resources

• Authoring Agencies: IRGC-Affiliated Cyber Actors Exploit PLCs in Multiple Sectors, Including US Water and Wastewater Systems Facilities
• CISA: Bulletproof Defense: Mitigating Risks From Bulletproof Hosting Providers
• EPA: Cybersecurity for the Water Sector
• CISA: Water and Wastewater Cybersecurity
• CISA: Exploitation of Unitronics PLCs used in Water and Wastewater Systems
• CISA: Iran Threat Overview and Advisories
• FBI: The Iran Threat and Cyber Threat Overview: Iran
• CISA, MITRE: Best Practices for MITRE ATT&CK Mapping
• CISA: Decider Tool
• CISA: Cross-Sector Cybersecurity Performance Goals 2.0
• CISA: No-Cost Cybersecurity Services and Tools
• CISA: Secure by Demand: Priority Considerations for OT Owners and Operators when Selecting Digital Products
• NSA, CISA: NSA and CISA Red and Blue Teams Share Top Ten Cybersecurity Misconfigurations
• CISA: Secure by Design
• FBI, CISA: Primary Mitigations to Reduce Cyber Threats to Operational Technology
• United Kingdom National Cyber Security Centre: Secure connectivity principles for operational technology

Contact Information

U.S. organizations are encouraged to report suspicious or criminal activity related to information in this advisory to CISA, the FBI, and/or NSA:

• Contact CISA via CISA’s 24/7 Operations Center at contact@cisa.dhs.gov or 1-844-Say-CISA (1-844-729-2472). File a claim with FBI’s Internet Crime Complaint Center (IC3) or contact your local FBI field office. When available, please include the following information regarding the incident: 
  • Date, time, and location of the incident;
  • Type of activity;
  • Number of people affected;
  • Type of equipment used for the activity; and
  • Name of the submitting company or organization, and a designated point of contact.
• For NSA cybersecurity guidance inquiries, contact CybersecurityReports@nsa.gov.
• Entities required to report incidents to DOE should follow established reporting requirements, as appropriate. For other energy sector inquiries, contact EnergySRMA@hq.doe.gov.
• Contact the Rockwell Automation PSIRT for questions regarding their guidance or for reporting cyber incidents related to Rockwell Automation products at PSIRT@rockwellautomation.com.
• Contact the Schneider Electric CPCERT at cpcert@se.com for questions regarding this guidance, or to report cyber incidents related to Schneider Electric products.
• Contact Siemens ProductCERT for up-to-date information about the security of Siemens products or to report cybersecurity vulnerabilities at productcert@siemens.com. For support with increasing the security of installed Siemens PLCs, contact Siemens Industrial Cybersecurity Services at services.automation@siemens.com. See Siemens ProductCERT and Siemens CERT for more information.

Disclaimer

The information in this report is being provided “as is” for informational purposes only. CISA and the authoring agencies do not endorse any commercial entity, product, company, or service, including any entities, products, or services linked within this document. Any reference to specific commercial entities, products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply endorsement, recommendation, or favoring by CISA and the authoring agencies.

Version History

April 7, 2026: Initial version.

July 22, 2026: Update includes new guidance on detecting malicious activity, expanded scope of observed targeting, and best practices for secure PLCs deployment.

Notes

¹Project file refers to the software file that contains ladder logic and configuration settings. On Rockwell Automation devices, it is referred to as an .ACD file.

² See CompactLogix 5370 Controllers (Chapter 5: “Select the Operating Mode of the Controller”) for more information on functions available for the switch.

• The profile backup mechanism has been enabled by default for all desktop platforms in Nightly, as well as Beta! The current plan is to have this ride out to Firefox 151 for Windows, macOS and Linux on May 18th!
  • This feature, when enabled, will create a copy of your profile data in the background and store it in a single file on your file system that you can restore from.
  • You will be able to manage this feature in Settings under Sync (for now)
    • 
  • You can read more about the feature here
• As followups to the recent addition to the WebExtension tabs API to support the new SplitView tabs feature, tabs.group() and tabs.ungroup() have been fixed to work correctly with split view tabs, and fixed split views being prepended instead of appended to tab groups when adopted into a new window – Bug 2029099 / Bug 2029534
• Adaptive autofill has been enabled on Nightly.
  • Previously, autofill only completed domains (e.g. typing red autofilled reddit.com). Now it can also complete full URLs for pages you visit often (e.g. red → reddit.com/r/firefox), learning from what you actually click in the address bar. If a suggestion isn’t helpful, you can now dismiss it so autofill learns what not to show you too.
    • If you run into issues or have feedback, you can file a bug here!
• Markus Stange [:mstange] implemented dynamic toolbar on top in RDM (#1978145), but also implemented some static skeleton UI so it’s closer to what we actually have in Firefox for Android
  • dynamic toolbar is behind a pref: devtools.responsive.dynamicToolbar.enabled
  • it can be put on top by setting devtools.responsive.dynamicToolbar.onTop, otherwise it’s at the bottom
  • 

Friends of the Firefox team

Resolved bugs (excluding employees)

Script to find new contributors from bug list

Volunteers that fixed more than one bug

• Amin Amir
• aoia7rz7l
• Chukwuka Rosemary
• DrSeed
• Frédéric Wang Nélar
• japandi
• John Iweh
• jonathancabera
• Josh Aas
• Keji Bakare
• kofoworola shonuyi
• konyhéa
• liz
• Mathew Hodson
• Okhuomon Ajayi
• Oluwatobi
• ROSHAAN
• Sam Johnson

New contributors (🌟 = first patch)

•  Anthony Mclamb: Disable the legacy Edge migrator
•  Amin Amir
  • 🌟Fix browsingContext.sys.mjs to assign to #contextCreatedHandled instead of contextCreatedHandled
  • Fix missing WITHOUT ROWID SQLite performance optimization in SERPCategorization.sys.mjs
  • 🌟 Amine Zroual: Omitted maxResults property not handled correctly in getRecentlyClosed
• any1here: install_sig_alt_stack incorrectly checks mmap’s return value
• 🌟 Armin Ulrich: Fix MessageHandlerRegistry.sys.mjs calling getExistingMessageHandler with an unused second argument
• japandi
  • Cannot remove amazon.com from top sites list
  • The height of the pinned tabs area should be responsive to the number of pins
  • Use cenum for nsIHelperAppLauncherDialog reason constants to enable better typescript annotations
• Nathan Johnson [:narjoDev]: Remove browser.display.use_system_colors pref
• DrSeed
  • Firefox shows vertical tabs in new windows despite “Hide tabs and sidebar” setting
  • The “Expand sidebar on hover” option is not kept after the vertical tabs are disabled and enabled again
• Keji Bakare:
  • Split view’s focus-outline is clipped on the right side of left tab
  • White space on the right side of left panel in split view
• 🌟 gotyaoi: Reload toolbar button is active on about:newtab
• Itoro James: [A11y][Keyboard Navigation]Cancelling a note via Keyboard Navigation still saves it
• John Iweh: The notification dot is not displayed if the tab is in a Split View
• 🌟 John Iweh: sidebar-shown attribute remains when sidebar.revamp is false
• 🌟 jonathancabera:
  • The Move tab to Split View option is also displayed for the tabs that are within the Split View
  • A Note with long text (1003 characters) is saved by pressing ENTER even if the “Save” button is disabled
  • Tab group guide line becomes disconnected under certain conditions related to split views in vertical tab mode
• Aloys: Remove logic that forces distribution language packs to be reinstalled when upgrading from Firefoxes older than 67
• liz:
  • Create test to ensure maxRenderCountEstimate is never being set to Infinity in virtual-list component in Fx View
  • Button accessible name does not convey its function: missing topic context (Settings dialog > Topics dialog > buttons Following/Unfollow/Blocked/Unblock)
• Mary cathline: Tab Group Label does not respect touch density in vertical tab bar
• 🌟 Brandon Lucier: Popups opened with window.open give window type normal instead of popup
• karan68: [dialog] New Shortcut dialog needs a label/accessible name
• 🌟 Vector: Button does not programmatically indicate that it opens a dialog (Recent activity section > story card > ••• disclosure > Delete from History button)
• 🌟 Osoble: Update font size and weight for synced tabs device name headers in Firefox View
• konyhéa:
  • Add test for sync admin disabled to browser_syncedtabs_errors_firefoxview.js
  • Check all second paramaters for TestUtils.waitForCondition in Fx View test files
  • Recently Closed Tabs, Tabs from Other Devices, and History pages should have Cmd / Ctrl + Click on a link open the link in the new background tab.
• Noble Chinonso: #shouldHandleEvent in SidebarTreeView.js compares event.keyCode to string values, causing Home/End keys to never be handled
• Pranjali Srivastava: Add a test to verify that the space above tabs is consistent across PB, LWT and sizemode (where appropriate)
• Okhuomon Ajayi:
  • More spacing is needed between the tab note icon and the close icon on the tab
  • The tabs in vertical mode collapsed state are positioned differently in Split View
  • Keep vertical split view tabs stacked vertically even when the sidebar is expanded when expand on hover is enabled
  • Vertical split view tabs can be too big or small when tabs are overflowing
• 🌟 Rishan: Fix duplicated arrow function in browser_history_sidebar.js
• Chukwuka Rosemary:
  • “Forget About This Site” context menu option missing from Firefox View history
  • Long strings are not displayed properly on the about:opentabs page search filed
  • Add test for Forget This Site option in Fxview history context menu.
• ROSHAAN:
  • 🌟Tab note background colour is incorrect for default light theme
  •  [win/linux] The splitter between content areas does not match Figma spec
  • Fix typo in OpenInTabsUtils.confirmOpenInTabs()
• Sameeksha: Disclosure button expanded/collapsed state not programmatically defined (Customize button)
• kofoworola shonuyi:
  • 🌟Actually hide or remove sidebar-shown attribute when in fullscreen.
  • Add a test for checking sidebar-shown attribute in fullscreen mode
• 🌟 Sayd Mateen: Page URL is displayed as tab name when page’s contains about:reader?</a></p> <p>

• Oluwatobi:
  • Unable to delete selected history entries from sidebar
  • Incorrect Sidebar button state/tooltip hover text
  • The city name heading level doesn’t follow the correct heading level order
• Nishchay [:nish]: Unable to add tabs to old closed tab groups (tabGroupState.splitViews is undefined)

Project Updates

Add-ons / Web Extensions

Addon Manager & about:addons

• In preparation for the Project Nova restyling of the about:addons page, we have refactored about:addons into separate per-component ES modules, splitting the monolithic aboutaddons.js and aboutaddons.html into 16 dedicated component files under components/ (with no behavior or UI changes) – Bug 2032014
  • NOTE: if you have working on patches with changes to about:addons internals it is very likely you’ll need to rebase and solve merge conflicts hit on top of this refactoring, the internals are still largely the same as before but don’t hesitate to reach out to the Addons team if you have doubts / questions or need help to figure out how to adapt your patch of top of these changes

WebExtensions Framework

• Fixed exportFunction to preserve the constructibility of the wrapped function instead of unconditionally making all exported functions implicitly as constructors – Bug 2033173
  • Thanks to Gregory Pappas for contributing this improvement to the Content Scripts’ Xray Wrappers helpers!
• Fixed a Firefox 151 regression where extension content scripts accessing location.ancestorOrigins caused subsequent page script reads of the same property to fail with “Permission denied”, breaking sites like Gmail – Bug 2034329
  • Thanks to Simon Farre for promptly investigating and fixing this recent regression!

WebExtension APIs

• Updated sessions.getRecentlyClosed() to remove the hardcoded cap when maxResults is omitted – Bug 1392125
  • Shoutout to Amine Zroual for contributing this enhancement to the sessions WebExtensions API!

DevTools

• Artem Manushenkov fixed an issue where autosuggestion popup was removing overridden indicators from properties in the Inspector (#1983408)
• Andrea Marchesini [:baku] fix DevTools cookie header serialization for long cookies, which could lead to cookies not being visible in Netmonitor (#2031299)
• Julian Descottes [:jdescottes] fixed a toolbox crash that was happening we couldn’t find a localization file (e.g. when using a language pack on Nightly) (#2028930)
• Nicolas Chevobbe [:nchevobbe] improved @container tooltip so it show the value of variables used in style()(#2030239), has enough contrast in dark mode (#2033782) and contains a link to select the container (#2031688)
  • 
• Hubert Boma Manilla (:bomsy) is making good progress on migrating the Console to CodeMirror 6 (#2032758, #2026569)

Fluent

• We’re now at over 72% of our strings being Fluent! Got a component still using .properties? Convert when you can!
• 

Migration Improvements

• Thanks to dao for fixing a recent alignment issue in the migration wizard dropdown
• Thanks to volunteer contributor Anthony Mclamb for his patch that disables the legacy EdgeHTML Edge migrator! Once that finishes rolling out, presuming no surprises, we’ll go ahead and remove the migrator entirely.

New Tab Page

• Nova for New Tab has ridden the trains to Beta! It will be enabled by default, globally, when Firefox 151 goes out to release on May 19th
  • It’s possible that we’ll do a train-hop coupled with an experiment to enable HNT Nova for a few clients a bit earlier.
• Maxx Crawford enabled Nova designs for New Tab, rolling out the updated layout, widgets, and customization panel behind HNT Nova flags.
• Maxx Crawford fixed the Nova content feed to render the intended four‑column layout by correcting CSS grid breakpoints.
• Maxx Crawford resolved a first‑load failure in the Weather widget by fixing init order and fetch timing, eliminating the “Oops” error.
• Maxx Crawford synchronized the Weather toggle between about:preferences#home and the panel via the shared showWeather pref to prevent desync.
• Maxx Crawford updated Nova grid focus order to align tab flow with visual order for keyboard users.
• Maxx Crawford fixed critical UI issues in Lists and Timer widgets covering overflow, controls, and layout stability.
• Maxx Crawford guarded document.dir access in Nova render paths to avoid startup cache worker errors and improve startup stability.
• Rolf added a new normalization method for the inferred interest vector to stabilize topic relevance across sessions.
• Rolf prevented unnecessary content refreshes during Pocket New Tab experiments, reducing jank and bandwidth.
• Sameeksha defined the Customize button’s expanded/collapsed state programmatically using aria-expanded for better a11y.
• liz clarified follow/unfollow/blocked button names with topic context so screen readers announce clear actions.
• Vector marked the Delete from History control as opening a dialog via aria-haspopup=dialog for assistive tech.
• Scott Downe fixed a regression that flipped the Wallpapers pref off, restoring user selections.
• Irene Ni corrected privacy link color and focus styles for contrast and keyboard visibility.
• Reem Hamoui added a wallpaper toggle reset in the Nova customization panel so users can quickly restore default wallpapers without extra steps.
• Reem Hamoui fixed the Customize pencil button to match the Nova spec, aligning placement and iconography for visual consistency.
• Dre updated the ‘Fresh new’ wallpapers copy to a clearer, localized message for better comprehension.
• Irene Ni fixed Nova privacy link color and focus styles to meet contrast and focus ring guidelines, improving accessibility on New Tab.
• Irene Ni adjusted Sponsored tile character limits to prevent truncation/overflow, yielding cleaner titles across grid and wide tiles.
• Scott Downe fixed a regression that flipped the Wallpapers user pref to false, restoring wallpapers for affected users and preventing unintended disablement.
• Reem Hamoui hooked the wallpaper check into the new toggle logic so the Customization Panel accurately reflects wallpaper availability and state.
• Irene Ni landed Nova UI updates for the Daily Briefing 3-pack card, improving spacing, type scale, and tap targets.
• Reem Hamoui added a wallpaper toggle reset in the Nova customization panel so users can quickly restore default wallpapers without extra steps.
• Reem Hamoui fixed the Customize pencil button to match the Nova spec, aligning placement and iconography for visual consistency.
• Dre updated the ‘Fresh new’ wallpapers copy to a clearer, localized message for better comprehension.
• Irene Ni fixed Nova privacy link color and focus styles to meet contrast and focus ring guidelines, improving accessibility on New Tab.
• Irene Ni adjusted Sponsored tile character limits to prevent truncation/overflow, yielding cleaner titles across grid and wide tiles.
• Scott Downe fixed a regression that flipped the Wallpapers user pref to false, restoring wallpapers for affected users and preventing unintended disablement.
• Reem Hamoui hooked the wallpaper check into the new toggle logic so the Customization Panel accurately reflects wallpaper availability and state.
• Irene Ni landed Nova UI updates for the Daily Briefing 3-pack card, improving spacing, type scale, and tap targets.

Search and Urlbar

• Marco has fixed a couple of issues with the places databases to try and improve stability. This should help with avoiding users losing bookmarks or favicons.
• Work continues on the new separate search bar to improve the functionality, e.g. allowing middle click to perform a search in a new tab, avoiding performing a search when adding a search engine.
• Work also continues on the new Nova layouts.

Smart Window

• uplifted 10 bugs to 150.0.1 dot release addressing initial user feedback from diary study and Connect
  • jump to bottom of conversation 2028692
  • stop streaming button 2029204
  • back/forward navigation from assistant 2029229
  • dark mode for various chips 2024499
• search engine switching from smart bar 2021973
• Nova styling within smart window 2026794

Storybook/Reusable Components/Acorn Design System

• Dustin converted moz-breadcrumb-group variables into JSON design tokens Bug 2029181 – Convert moz-breadcrumb-group variables into JSON design tokens
• Dustin converted moz-box-* variables into JSON design tokens Bug 2029180 – Convert moz-box-* variables into JSON design tokens
• Dustin converted moz-promo variables to JSON design tokens Bug 2029190 – Convert moz-promo variables into JSON design tokens
• Dustin converted moz-reorderable-list variables to JSON design tokens Bug 2029191 – Convert moz-reorderable-list variables into JSON design tokens
• Dustin converted moz-visual-picker variables to JSON design tokens Bug 2029193 – Convert moz-visual-picker-item variables into JSON design tokens
• Dustin updated browser-shared.css so it passes use-design-tokens Bug 2022985 – Update browser-shared.css so it passes use-design-tokens
• Dustin updated popup.css so it passes use-design-tokens Bug 2022979 – Update popup.css so it passes use-design-tokens
• Jon added opacity tokens and added opacity to use-design-tokens stylelint rule  Bug 1955325 – Create opacity tokens
• Jon converted toolbar design tokens to JSON Bug 2017970 – Convert toolbar design tokens to json
• Anna fixed moz-select with panel-list drop-down size inconsistency Bug 2032365 – Applications Action drop-down menus sometimes have a different size when opened
• Anna fixed issue with the disabled state of moz-radio component Bug 2027123 – moz-radio disabled state cannot be changed while the moz-radio-group is disabled
• Anna updated moz-button and moz-box-button components to prevent label corruption when accesskeys are present and the label changes.   Bug 2022326 – moz-button with accesskey label becomes corrupted when l10nId updates dynamically

UX Fundamentals

• The error pages shown when a server sends back an invalid response header or an unsupported content encoding now display accurate, context-specific messages. The invalid response header page also gained a helpful list of next steps. – 2027209
• In progress: The error page illustrations are being replaced with new artwork, and the system now supports per-illustration size configuration, giving each image the ability to define its own appropriate dimensions. – 2031837

Settings Redesign

• Tim converted settings related to Accessibility page to config-based pane Bug 1968116 – Convert settings related to Accessibility page to config-based settings
• Benjamin converted Privacy & Security page to the config-based pane Bug 1968112 – Convert settings related to Privacy & Security page to config-based settings
• Finn integrated Firefox Labs page into setting-pane config Bug 2021047 – Integrate Firefox Labs page into setting-pane config
• Anna converted Firefox Updates section to config-based prefs Bug 1990961 – Convert Firefox Updates section to config-based prefs
• Mark Kennedy added moz-promo, that is welcoming users to the redesigned settings Bug 2015093 – Add a moz-promo to welcome users to the redesign
  • 
• Anna added possibility to search for actions in the redesigned “Applications” section Bug 2020370 – It’s no longer possible to search for actions in the new “Applications” section
• Anna fixed the Settings navbar layout breakage

Source Code Viewer

Crate pages now have a "Code" tab that lets you browse the contents of published crate versions directly on crates.io. This shows you the exact files that cargo downloads when you add a crate as a dependency, which might differ from the linked repository. This makes it much easier to audit your dependencies, including files that never appear in the repository, like the normalized Cargo.toml files that cargo generates.

The viewer comes with a file tree sidebar with search functionality, syntax highlighting, and GitHub-style line selection, where clicking or dragging line numbers produces shareable #L10-L20 URLs.

Under the hood, the server now builds a zip file for every published version. Since the .crate files that cargo consumes are gzipped tarballs without random access support, a background job re-packs each of them into a seekable zip archive plus a JSON manifest describing the contained files. Both are served from our static CDN. The frontend then fetches only the manifest and loads each file on demand with an HTTP range request. Because of this architecture, browsing crate sources essentially adds no load on the crates.io API servers. Existing crate versions have been backfilled, so this works for old releases too.

The rendering library behind the code viewer is a diff renderer at heart, and that's no accident: a version-to-version diff viewer built on the same infrastructure is currently in the works. This will allow you to review exactly what changed between two published versions, right on crates.io. Stay tuned!

Untangling crates.io Accounts from GitHub

At the end of May, the crates.io team accepted RFC #3946. Crates.io accounts always have been tightly coupled to GitHub: signing in means "Log in with GitHub", and your crates.io identity is your GitHub username. The RFC changes that. It introduces usernames that are native to crates.io and independent of linked GitHub accounts, as a prerequisite for eventually supporting login via other identity providers.

The implementation of crates.io usernames has started, but there is still a lot left to do, most visibly the ability to change your crates.io username. After that is complete, there will be future RFCs and implementation for signing in with identity providers other than GitHub. Since all of this touches authentication and account security, we are deliberately taking it slow and rolling these changes out in small, carefully reviewed steps.

Advisories and Suggestions

In our January update we introduced the "Security" tab, which shows security advisories from the RustSec database. We have since taken this integration one step further: crates that RustSec has flagged as unmaintained now show a warning banner directly on their crate pages, linking to the corresponding advisory for details and possible alternatives. Thanks to Dirkjan Ochtman for implementing this feature!

Related to this, some popular crates have been largely absorbed into the Rust standard library over the years, like lazy_static, which has been superseded by std::sync::LazyLock since Rust 1.80. Crate pages of such crates now show a friendly "You might not need this dependency" banner describing the standard library replacement, and superseded crates in dependency lists get a small light bulb icon with a similar hint.

The dataset behind this feature lives in the new rust-lang/std-replacement-data repository, together with a documented inclusion policy: standard library replacements only, every entry must cite the stable std, core, or alloc API and Rust version, and crate maintainers get a notice-and-comment window before an entry is added. New entries can be proposed upstream and can benefit other tools too.

Ferris

The most delightful change of this cycle: the Ferris on our error pages now follows your mouse cursor with its eyes:

Getting a 404 error on crates.io is now slightly less sad.

Svelte Frontend Migration Completed

In our January update, we announced that we were experimenting with porting the crates.io frontend from Ember.js to Svelte. This experiment has concluded successfully: the new frontend reached feature parity, went through a public testing phase in April, became the default at the beginning of May, and the Ember.js app has been removed from our repository.

We designed this change to be invisible for our users, since the new frontend is a 1:1 port of the previous design and functionality. For the team and our contributors, however, it is a big deal: the frontend is now built on a more modern framework, which should make it easier for new contributors to get started. It also allows us to iterate faster, as the source code viewer above demonstrates.

We want to thank the Ember.js team for a framework that served crates.io well for many years, and the Svelte team for making the transition so enjoyable.

Miscellaneous

These were some of the more visible changes to crates.io over the past six months, but a lot has happened "under the hood" as well:

• Search performance: Relevance-sorted search queries previously ranked every crate matching the query, which could take 1-2 seconds for short or common search terms. Ranking is now bounded to the 1,000 matching crates with the highest recent download counts.

• Reverse dependencies performance: The reverse dependencies endpoint no longer recomputes the full dependent set on every request. It is now served from a precomputed table kept in sync by database triggers, turning an expensive join into a bounded index scan and greatly reducing the chance of getting a timeout error.

• New ARCHITECTURE.md: If you've ever wondered how crates.io actually works, our ARCHITECTURE.md document got a complete rewrite. It is now organized around the high-level systems that make up crates.io and how they fit together, and includes walkthroughs of what happens when you run cargo publish, why a typical crate download never touches our API servers, and how download counts are derived from CDN access logs.

• Definition lists: READMEs now render Markdown definition lists, a widely used Markdown extension. Our markdown renderer comrak already supported them, the extension just wasn't enabled yet. Thanks to @mistaste for this contribution!

• CDN cache tags: Files uploaded to our static CDN now carry cache-tag metadata, allowing us to invalidate all cached files of a crate or a specific release in a single operation, instead of issuing one invalidation per file URL.

• Caching improvements: We removed a global Vary: Cookie response header that was preventing our CDNs from caching public API responses and frontend assets effectively. Per-user responses now use Cache-Control: no-store instead, resulting in better cache hit rates at the CDN edge.

• Accessibility: We have made crates.io friendlier to screen readers: decorative icons are now hidden from the accessibility tree, heading hierarchies have been fixed, and lists are marked up as proper lists. ARIA snapshot tests now ensure that regressions can't slip in unnoticed. We plan to continue to improve crates.io accessibility over the coming months.

• Git index performance: The background worker's local clone of the git index is now a bare and shallow repository, eliminating roughly 250,000 checked-out files and the full commit history from its disk, improving its performance as we see increased rates of crate publication. The periodic index squashing now goes through the GitHub API instead of generating large git packs locally, which had previously caused out-of-memory failures on the production worker.

Feedback

We hope you enjoyed this update on the development of crates.io. If you have any feedback or questions, please let us know on Zulip or GitHub. We are always happy to hear from you and are looking forward to your feedback!

Executive summary 

A group of Russian state-supported cyber actors has been targeting and compromising various Western government and commercial organizations using the Zimbra Collaboration Suite (ZCS) software since at least July 2025. The Russian state-supported advanced persistent threat (APT) group’s activity is tracked in the cybersecurity community under several names (see Cybersecurity industry tracking), primarily as “LAUNDRY BEAR,” a name initially coined by the Netherlands General Intelligence and Security Service (AIVD) and Defence Intelligence and Security Service (MIVD) [1].

LAUNDRY BEAR’s targeting is almost certainly to gather sensitive information for the Russian Federation, with these actors primarily focusing on the covert acquisition of email data. Previous campaigns indicated LAUNDRY BEAR relied on unsophisticated initial access techniques—including password spraying, phishing, and pass-the-cookie—allowing the group to successfully run high-volume operations. The latest campaign targeting ZCS uses a novel exploit that was a zero-day vulnerability when first exploited and continues to be successfully exploited. The vulnerability, Common Vulnerabilities and Exposures (CVE) CVE-2025-66376, was patched in November 2025. This demonstrates LAUNDRY BEAR’s intent and ability to deploy increasingly sophisticated technical capabilities.

Unlike traditional phishing campaigns that persuade a user into taking an action, such as clicking a link or opening a file, LAUNDRY BEAR’s latest campaign leverages a view-based exploit that only requires a user to view a malicious email within a vulnerable version of the webmail service. Once viewed, the exploit attempts to exfiltrate the victim’s last 90 days of email communications, the organization email directory (i.e., Global Address List [GAL]), and other sensitive information to servers controlled by LAUNDRY BEAR. The exploit also attempts to establish persistent access to victim accounts through a variety of means as detailed in the Persistence and credential access section.

This Cybersecurity Advisory (CSA) warns of this ongoing malicious threat activity and urges organizations to update their vulnerable software and implement additional mitigations to thwart these Russian state-supported actors’ continued success. The CSA is being released by the following authoring and co-sealing agencies:

• United States National Security Agency (NSA)
• United States Federal Bureau of Investigation (FBI)
• Netherlands Defence Intelligence and Security Service (MIVD)
• Netherlands General Intelligence and Security Service (AIVD)
• United States Cybersecurity and Infrastructure Security Agency (CISA)
• United States Defense Counterintelligence and Security Agency (DCSA)
• United States Department of Defense Cyber Crime Center (DC3)
• United States Department of the Treasury
• United States Naval Criminal Investigative Service (NCIS)
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Communications Security Establishment Canada’s (CSE’s) Canadian Centre for Cyber Security (Cyber Centre)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• United Kingdom National Cyber Security Centre (NCSC-UK)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)¹
• Danish Defence Intelligence Service (DDIS)²
• Estonian Foreign Intelligence Service (EFIS)³
• Finnish Defence Intelligence (FDI)⁴
• Finnish Security and Intelligence Service (SUPO)⁵
• French General Directorate for Internal Security (DGSI)⁶
• French National Cybersecurity Agency (ANSSI)⁷
• Italian External Intelligence and Security Agency (AISE)⁸
• Italian Internal Intelligence and Security Agency (AISI)⁹
• Security and Intelligence Service of the Republic of Moldova (SIS RM)¹⁰
• Polish Foreign Intelligence Agency (AW)¹¹
• The Military Counterintelligence Service of Poland (SKW)¹²
• Spain National Intelligence Centre (CNI)¹³
• Sweden National Cyber Security Centre (NCSC-SE)¹⁴

The authoring agencies urge any organizations using ZCS to implement the recommendations listed within the Mitigations section of this advisory to reduce the risk associated with this activity. This CSA also includes specific remediations for organizations to implement if they discover the presence of the listed Indicators of compromise (IOCs).  

As more organizations update their ZCS software based on this CSA, LAUNDRY BEAR may discontinue the current campaign exploiting this vulnerability; however, based on the success of this and previous campaigns, it is very likely that the group will continue to target ZCS and other email systems used by organizations in Western countries. The actors will almost certainly continue to rely on email to engage potential victims by exploiting novel vulnerabilities and, when necessary, use social engineering techniques to assist with their efforts. The authoring agencies recommend organizations regularly update their mail service software and continuously monitor their email systems and emails for malicious activity.

For a downloadable list of IOCs, see:

• AA26-204A.stix.xml (STIX XML)
• AA26-204A.stix.json (STIX JSON)

Cybersecurity industry tracking

The cybersecurity industry provides overlapping cyber threat intelligence, indicators of compromise (IOCs), and mitigation recommendations related to these Russian state-supported cyber actors. While not exhaustive, the following are threat group names commonly used for these actors within the cybersecurity community:

• LAUNDRY BEAR
• Void Blizzard [2]
• CL-STA-1114 [3]
• TA488 (formerly UNK_PitStop) [4]

Note: Cybersecurity companies have different methods of tracking and attributing cyber actors, and this may not be a 1:1 correlation to the U.S. government’s understanding for all activity related to these groupings.

Background

Public advisories from Netherlands General Intelligence and Security Service (AIVD), Netherlands Defence Intelligence and Security Service (MIVD), and Microsoft highlighted these Russian state-supported advanced persistent threat (APT) actors in May 2025, calling them LAUNDRY BEAR and Void Blizzard respectively [1] [2]. Both advisories assessed that the group was engaged in malicious cyber activity as early as April 2024.  

The May 2025 advisories highlighted a cluster of activity targeting cloud-based email environments, including Microsoft Exchange in particular, and abusing legitimate APIs to perform data exfiltration in bulk [T1114.002]. The group relied on unsophisticated means of initial access, including procuring stolen credentials on criminal marketplaces [T1078], and using social engineering techniques to lure targets into interacting with a malicious site masquerading as a legitimate one. As of April 2025, one of these sites resembled a European Defence & Security Summit registration portal that required registrants to sign in to their Microsoft account to view. Once a user entered their Microsoft credentials into this malicious site, LAUNDRY BEAR’s modified version of the open source adversary emulation toolkit, Evilginx, intercepted the user’s credentials. LAUNDRY BEAR then used this authentication data, including passwords and session tokens, to access the compromised account and conduct mass email exfiltration, as well as harvest other information. This method of compromise is commonly known as an adversary-in-the-middle (AiTM) technique [T1557].  

Beginning around July 2025, LAUNDRY BEAR shifted toward a more technical method of email compromise, highlighting their continued efforts to covertly acquire email communications from a variety of Western organizations of interest and deliver them to the Russian Federation. Using a custom-developed capability [T1587.001] named “Улей” or “Ulej” (Russian for beehive), LAUNDRY BEAR successfully targeted and exfiltrated sensitive user information from organizations who use the Zimbra Collaboration Suite (ZCS) product [T1114]. Data LAUNDRY BEAR attempted to exfiltrate from compromised accounts included:

• Last 90 days of emails,
• Email address,
• Password [T1589.001],
• Global Address List (GAL) [T1087],
• Two-factor authentication (2FA) tokens, and
• Newly-created Application Passcode [T1098].

The covert and persistent nature of this activity, along with the absence of any known financial extortion, almost certainly indicates this group’s involvement in espionage activities with Russian government backing. Additionally, extensive Ukrainian targeting, prior to use against U.S. and other NATO allies, outlines an increasing trend within Russian cyber threat groups to target Ukrainian users first—both as a priority target and as a testbench for malicious cyber techniques before broader global deployment.

Targeting details

LAUNDRY BEAR has targeted and compromised users in various organizations, including those associated with:

• the Defense Industrial Base (DIB),  
• the federal and local government,
• education,
• energy,
• law enforcement,  
• media,  
• non-governmental organizations, and
• technology.

Technical details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise framework, version 19. This advisory also uses MITRE D3FEND^TM version 1.4.0¹⁵. See Appendix A and Appendix B for tables of the activity mapped to MITRE ATT&CK and D3FEND tactics, techniques, and countermeasures.

Ulej is a novel data exfiltration and aggregation capability, that currently (as of the publication of this report) supports a campaign specifically targeting users of ZCS webmail servers. This capability is used to exploit CVE-2025-66376 [Common Weakness Enumeration (CWE) CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')], but likely could be adapted to exploit other vulnerabilities. It exfiltrates emails and other sensitive user data from a victim’s system immediately after exploitation and stores the data in an actor-controlled unattributable virtual private server (VPS) [T1074.002] running LAUNDRY BEAR’s “Flowerbed” collection framework. The collected data is almost certainly further exfiltrated to internal network resources for review and long-term retention.

Reconnaissance

LAUNDRY BEAR uses the Ulej capability to exploit the CVE-2025-66376 vulnerability in organizations using ZCS. This campaign’s targeted victimology and limited exploitation capabilities likely indicate this group manually identifies and targets the victim organizations. LAUNDRY BEAR likely identifies organizations with public-facing Zimbra infrastructure by port scanning [T1595] and fingerprinting datasets easily procured through various commercial vendors [T1596.005].  

After identifying a target organization, the group likely compiles email addresses for individual users to target with the exploit [T1589.002] from datasets offered by commercial vendors [T1597.002], open source intelligence [T1593], or previously exfiltrated data [T1597].  

Resource development

The actors procure VPSs from a variety of providers [T1583.003], including those with Know Your Customer (KYC) requirements, and often use fabricated identities. LAUNDRY BEAR primarily uses Mullvad VPN [T1583] when interacting with these servers, further demonstrating the group’s intent to mask their identity and maintain operations security (OPSEC). After the server is provisioned, an automated process deploys the Docker containers necessary for Ulej’s Flowerbed framework [T1608], which then receives and aggregates the data Ulej exfiltrates. These servers are typically only used for 7-60 days before moving to new infrastructure.

Flowerbed framework

Flowerbed is a Python project that uses Docker for containerization. The project includes four different Docker containers:

• Catcher,
• Certbot,
• Nginx, and
• Gardener.

Catcher acts as both a DNS and HTTP server to receive and aggregate exfiltrated victim information [T1048]. For additional information on Catcher, refer to the Exfiltration section of this advisory. Flowerbed’s next container, Certbot, is based on one of the official Certbot containers, which allows for automated generation of Let’s Encrypt certificates using DNS challenges through Cloudflare. This certificate can then be used by the Nginx container, which serves as an HTTPS reverse proxy for Catcher, enabling Flowerbed to disguise some of its exfiltration activity through an encrypted communications channel [T1048.002]. The Nginx reverse proxy also validates that the Server Name Indicator (SNI) value contains “*.i.*” prior to forwarding the traffic to Catcher. If the SNI does not contain that string, the Nginx server returns a 444 error to the client. This is likely an attempt to reject non-Ulej connections. Finally, the Gardener container functions as a health check for the Catcher service. Gardener is a simple Python script that validates Catcher correctly receives and processes data.

The simplistic Flowerbed codebase has indications that artificial intelligence (AI) played a role in its development. This highlights how AI is increasingly being used to develop malicious capabilities [T1588.007]. The dependence on AI for a simple capability, such as Flowerbed, alongside a previous reliance on open source capabilities, such as Evilginx2 [T1588.002], likely indicates a lack of advanced technical knowledge within LAUNDRY BEAR, especially in relation to true software development capabilities.

Initial access

To gain initial access, LAUNDRY BEAR sends an email containing a malicious JavaScript payload to the target [T1566]. Through exploitation of CVE-2025-66376, this JavaScript payload is immediately executed once the user views the malicious email [T1203], such as the one shown in Figure 1, in the ZCS webmail platform. Since at least November 2025, LAUNDRY BEAR began sending these phishing emails from victim infrastructure through compromised accounts [T1199], as shown in the email metadata in Figure 2. These compromised accounts were likely previous victims of this, or another LAUNDRY BEAR, campaign and their use is intended to further obfuscate and frustrate anti-phishing tools and training.

According to the National Vulnerability Database (NVD), CVE-2025-66376 was initially published on 5 January 2026. This vulnerability allows for execution of a JavaScript payload included in email content due to improper sanitization of Cascading Style Sheet’s (CSS) @import directives within an email [5]. Because the activity attributed to this campaign began in July 2025—months before Synacor released a patch and the CVE was published—the payload initially exploited a zero-day vulnerability at that time [T1587.004].  

Utilization of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability.

Hidden in LAUNDRY BEAR’s email is a Base64 encoded payload within the “onload” field of a Scalable Vector Graphics (SVG) element [T1027.017], as shown in Figure 3. Leading up to the inclusion of this payload in the SVG element are various instances of @import directives, as required to leverage CVE-2025-66376. This payload includes an XOR encrypted final script encoded in a Base64 inner payload (see Figure 3) [T1027.013]. The outer payload decodes and decrypts the inner payload using an XOR function and a hardcoded key and then executes the script contained within the inner payload containing the collection and exfiltration logic. By changing the key used for the XOR encryption of the inner payload or adding additional @import directives with non-functional code [T1027.010], LAUNDRY BEAR can easily generate new payloads that bypass basic threat detection signatures. This malicious payload attempts to collect and exfiltrate information in 12 asynchronous stages [T1119]. The stages in order of appearance within the payload are as follows:

1. sendStartPing,
2. gather_email,
3. gather_environment,
4. gather_2fa_codes,
5. gather_app_password,
6. gather_device_status,
7. gather_oauth_consumers,
8. gather_autocomplete_password,
9. enable_mail_protocols,
10. gather_gal,
11. sendArchives, and
12. sendFinishPing. 

Use of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability [T1587].

Persistence and credential access

To establish sustained persistence into the victim’s email account, the script attempts to modify account preferences and collect authentication information. Any collected credentials are later exfiltrated, as further described in the Exfiltration section below. Other campaigns attributed to LAUNDRY BEAR also demonstrated the group’s ability to circumvent multi-factor authentication through session token replay [T1550.004], and the Zimbra campaign follows a similar trend.

The script used in this campaign tries to discover the victim’s email address during the gather_email stage [T1087]. The script searches for this email address in two ways. First, it examines the batchInfoResponse variable, which an HTML script element on the webpage can define, for an email address. Even if the script finds an email address there, it also checks whether it acquired a Cross-Site Request Forgery (CSRF) token as described later in the Collection section of this advisory. If so, the script uses the “GetIdentitiesRequest” Simple Object Access Protocol (SOAP) command under the “ZimbraAccount” namespace to determine the victim’s email address [T1185] and then exfiltrates it. However, if the script does not have a CSRF token or the SOAP request fails, the script exfiltrates the email value recovered from the first method instead. If both attempts fail to capture the victim’s email, the script sends a JavaScript Object Notation (JSON) payload with a key of “email” and value of null over HTTPS and does not attempt DNS exfiltration.

During the gather_autocomplete_password stage, the script attempts to collect the victim’s saved password via the autocomplete feature of the victim’s password manager. The script injects two HTML div elements requesting login credentials onto the page outside of the victim’s view, as shown in Figure 4 and Figure 5. After waiting five seconds, the script then attempts to extract the password provided automatically by the password manager from the input element shown in Figure 4. If there is no value in that input field, it checks the password input field shown in Figure 5. If neither input field contains a value, a JSON payload with a key of “autocomplete_password” and value of null is sent over HTTPS and DNS exfiltration is not attempted.

LAUNDRY BEAR almost certainly relies on a mail client using the Internet Message Access Protocol (IMAP) for persistent access to the victim’s mailbox. During the enable_mail_protocols stage, a SOAP request leveraging the “ModifyPrefsRequest” command under the “ZimbraAccount” namespace is sent. This request attempts to set the “zimbraPrefImapEnabled” preference to TRUE. While the default setting for “zimbraPrefImapEnabled” is not well documented, this action is almost certainly intended to ensure that IMAP access to the victim’s mailbox is enabled.

ZCS does not support 2FA for some mail clients, including IMAP. To support users who rely on IMAP clients, ZCS allows for the generation of Application Passcodes. Application Passcodes are randomly generated passwords that can be used for clients that cannot support the normal 2FA process to authenticate. During the gather_app_password stage, the script makes a SOAP request using the “CreateAppSpecificPasswordRequest” command under the “ZimbraAccount” namespace to create a new Application Passcode [T1556.006]. The SOAP request uses “ZimbraWeb” as the name of the application.

Additionally, the script also attempts to collect 2FA tokens. During the gather_2fa_codes stage, the script makes a SOAP request using the “GetScratchCodesRequest” command under the “ZimbraAccount” namespace. The script then attempts to exfiltrate any non-null 2FA codes collected this way. The number of codes can vary, and each code is exfiltrated to Flowerbed individually.

Collection

As demonstrated in the Persistence and credential access section, this script relies heavily on SOAP requests to collect victim information. To make these requests, the script aims to acquire the victim’s current CSRF token, which it attempts to access within the webpage’s local storage using localStorage.getItem("csrfToken"). If the script is unable to acquire this CSRF token, it will be unable to make any SOAP requests. In addition to the SOAP commands documented in the Persistence and credential access section, other SOAP commands executed to collect victim information are shown in Table 1.

The script attempts to collect the victim’s GAL through brute force by searching for each two-character combination from a character set of “abcdefghijklmnopqrstuvwxyz1234567890.-_”. These queries are conducted using 20 batches of SOAP requests with 77 “SearchGalRequest” SOAP commands in each batch except for the last request containing only 58.

During the gather_environment stage, the script attempts to determine which type of ZCS webmail client the victim is using. The script checks the user’s current URL to determine the client type being used, checking for certain indicators (shown in Table 2) to determine the client type. The corresponding value is then used as the payload when exfiltrating the client type.

As part of collection, the script attempts to harvest any emails not marked as “junk” from the last 90 days from the victim’s account. Emails are collected daily by an HTTP GET request to the URL path, “/home/~/?fmt=tgz&meta=0&query=date:-{DAY_OFFSET}d AND (not in:junk)”. The {DAY_OFFSET} value would be between 0 and 89 representing how many days ago the email was sent or received. To prevent redundant collection and exfiltration of emails, a variable with a name based on the email date being queried, using a format of zd_comp_YYYY-MM-DD, and value of true, is saved to the window.top.localStorage property. This variable is saved regardless of whether the email is successfully exfiltrated.  

According to Mozilla documentation, if the user is not in a private browsing session, any data stored to localStorage does not typically expire. This means that if the user happens to execute the script again from the same computer, the script avoids attempting to re-exfiltrate previously captured emails. However, the script always attempts to pull any emails with a {DAY_OFFSET} of zero. In other words, the script always pulls emails sent or received the same day it is run. After email results are returned from the query for each day of email activity, those results are then passed to Flowerbed as described in the Exfiltration section.

The script also provides LAUNDRY BEAR with telemetry on any errors that occur during the collection process. This is accomplished by executing any collection or exfiltration code through helper functions that contain error handling logic. If an error occurs, a payload containing information on the error itself, the context of the error happening, and the stage in which the error occurred is sent to Flowerbed as described in the Exfiltration section below. For cases where the error occurs within a SOAP request, “:api” is concatenated to the stage value in the payload. If an error occurs during the batch SOAP requests that occur when collecting the GAL of the victim, the stage value will use a format of gather_gal:{VAL}:api. The {VAL} placeholder indicates which batch request, a number from 0 to 19, the error occurred in. Errors that occur during the password autocomplete interception process will use “gather_autocomplete_password:dom” for the stage value. Finally, if an error occurs when attempting to collect or exfiltrate a specific day’s emails, the stage will include which day the error occurred on, using the previously defined placeholder {DAY_OFFSET}, with a format of sendArchive:day-{DAY_OFFSET}.

Exfiltration

At the end of each stage in the collection process, the script attempts to exfiltrate acquired information to Flowerbed. The script primarily relies on two forms of data exfiltration: DNS [T1048.003] and HTTPS. Some information is exfiltrated over both the DNS and HTTPS channels.

Prior to exfiltration, a randomized 10- or 11-character alphanumeric string is generated as an identifier for the victim. This identifier is included in the URL of both the DNS- and HTTPS-based exfiltration.  

DNS exfiltration

DNS exfiltration occurs through DNS A record queries. To ensure data exfiltrated through DNS is not corrupted when traversing through non-actor-controlled DNS infrastructure, Ulej maintains compliance with RFC 1035, Domain Names - Implementation and Specification, specifically accounting for the case insensitivity and subdomain length requirements. Base32 encoding is used to create a case-insensitive payload. Once the payload is encoded, a period (“.”) is added every 60 characters to ensure each subdomain is under 63 characters long. The script then creates a new image object sourced from a URL with the scheme defined in Figure 6. Any traffic involving DNS exfiltration will have “d-“ prefixing the victim identifier, and the subdomain immediately following indicates the type of information being exfiltrated.

When the script generates an image object, the browser tries to retrieve the complete domain of the URL specified as the source of the image. This triggers a DNS request sent to the actor-controlled server and processed by Flowerbed. Table 3 lists both the information exfiltrated via DNS and their corresponding data type identifiers in the DNS queries.  

HTTPS exfiltration

Any information exfiltrated via DNS is also exfiltrated through HTTPS, as well as additional data including email content, contacts, attachments, and error logging information. By using Let’s Encrypt certificates, this group can quickly deploy new infrastructure and leverage encrypted HTTPS communications with valid server certificates when exfiltrating information from the victim’s environment. The HTTPS exfiltration capability only uses two HTTP content types, defined in Table 4. Traffic associated with HTTPS exfiltration will use the URL scheme shown in Figure 7.  

Some of the data transmitted via HTTPS uses the standard JSON content type format. The script includes the information in a POST request to actor-controlled infrastructure.  

Table 5 provides a summary of the JSON-based exfiltration.

The script transmits all HTTPS exfiltration not identified in Table 5 using the Octet-Stream content type as binary data. The POST requests for this method include a filename in the “X-Filename” header. Traditionally, developers use headers prefixed with “X-” to denote custom headers that do not follow a defined standard. The purpose of including this header remains unclear since the Catcher capability ignores the provided filename when saving the data. Table 6 summarizes the data exfiltrated in this format.

The script sends all exfiltrated data identified in Table 6 to the Catcher service exactly as received from the SOAP request in a JSON payload, except for email exfiltration. For email exfiltration, the script sends it as a GZIP compressed archive [T1560]. Although most of the exfiltration consists of valid JSON, the script still attempts to exfiltrate all information identified in Table 6 using the application/octet-stream content typing rather than application/json.

At the beginning and end of the collection and exfiltration activity, during the sendStartPing and sendFinishPing stages respectively, the script submits a POST request with a JSON payload to indicate that the script is starting or finishing execution. Throughout execution, the script also logs error events and send the logs using similar JSON payloads. The script sends the JSON in a POST request to the URL documented in Figure 2, using a URL path of “/v/p” and with a “subtype” key that shows which type of action it logged (start, finish, or error).  

Catcher

Ulej exfiltrates information to Flowerbed to be handled by a service named Catcher. Catcher is a containerized Python application, running in Docker as part of Flowerbed, which is detailed in the Resource development section. It receives exfiltrated data and temporarily stores it, enabling its eventual transfer to infrastructure designed for long-term, secure storage.

Catcher acts as an HTTP server over port 8000 and a DNS server on port 53. As described in the Resource development section, the Flowerbed project uses an additional Docker container running an Nginx reverse proxy to enable HTTPS support. This reverse proxy uses a certificate generated by Let’s Encrypt and forwards all traffic with an SNI containing “*.i.*” to port 8000 within the Catcher container.

The DNS service can accept A, AAAA, MX, TXT, and CAA queries. For any MX, AAAA, or CAA queries, the server will always provide an empty response. The system only supports TXT records as needed to process Automatic Certificate Management Environment (ACME) requests, which enable the assignment of Let’s Encrypt certificates. If the server receives an A query, Catcher will always respond with the public IP address of the Flowerbed server.  

However, if a query includes a domain formatted as shown in Figure 6 and Figure 7, the service saves a log file in JSON format to disk containing the following details of the DNS query:

• Time of query,
• Source IP address for query,
• Queried domain, and
• Type of query.

The HTTP server typically responds with OK, except in cases where the path is “pixel.gif” when the response contains a 1x1 gif image with a SHA-256 hash of ef1955ae757c8b966c83248350331bd3a30f658ced11f387f8ebf05ab3368629. Like the DNS service, the HTTP service will only log entries when the domain found in the host header of the request follows the expected formatting as seen in Figure 6 and Figure 7. As the HTTPS exfiltration uses non-standardized binary and JSON-formatted payloads when exfiltrating to Catcher, Catcher will check the content type of the request. If the content type is set to “application/json”, Catcher encodes the data in Base64 and includes it in the JSON log entry written to disk. If the content type is set to any other value, Catcher leaves the Base64 payload in the JSON log entry blank and saves the payload to a separate file with the same filename as the JSON log entry with a “.bin” file extension. An HTTPS exfiltration event causes Catcher to save a JSON formatted log file to disk containing the following information from the HTTP request:

• Time,
• Source IP address,
• Request method,
• Host,
• Path,
• Query string,
• Headers, and
• Base64 payload.

These JSON event log files and binary output files are then initially saved to the directory /root/hits/tmp and later moved to the /root/hits/ready directory once processed. This prevents incomplete files, which are still being uploaded to Catcher, from premature exfiltration from the server. Approximately every 60 seconds, a likely automated workflow establishes a Secure Shell (SSH) connection with the server hosting Flowerbed for a few seconds, almost certainly exfiltrating the data processed by Catcher to non-public-facing infrastructure. The command in Figure 8 also executes hourly to remove all files last modified at least two days ago from the /root/hits/ready directory.

Response strategies

Mitigations

In many cases, by the time an organization identifies a compromise related to this campaign, numerous sensitive and proprietary emails have already been exfiltrated. The significant risk posed by this cyber threat emphasizes the importance for organizations that use ZCS and other similar webmail solutions to take proactive steps to mitigate this risk.

All organizations that use the ZCS webmail service should immediately prioritize ensuring that their ZCS is not running a vulnerable version. A patch for CVE-2025-66376 was released for both 10.1.13 and 10.0.18 versions of ZCS [D3-AH]. If immediate patching is not feasible, organizations should advise employees to use alternative mail clients to access email and avoid using the Classic ZCS webmail client until ZCS is updated to a non-vulnerable version [d3f:Isolate].

System administrators should closely monitor any Internet-connected ZCS or other email systems and the workstations that access those systems and promptly apply available software updates [D3-AH]. Administrators can maintain awareness of active vulnerability exploitation by referencing open source resources, including CISA’s Known Exploited Vulnerabilities Catalog and NCSC-UK’s Responding to active exploitation of vulnerabilities guidance.

Organizations should consider using a third-party authentication service that supports passkeys for authentication to mediate access to ZCS and other services that do not natively support passkeys. By doing so, organizations can work to eliminate the possibility of automated password collection from autocomplete or password reuse [D3-CH]. However, Application Passcodes may still be necessary and should be monitored closely.  

Organizations should implement network monitoring capabilities with collection and short-term retention of packet capture or NetFlow data and maintain log collection and storage [CPG 3.Q]. This will allow organizations to monitor for and identify suspicious network activity [CPG 4.B], such as:

• Significant amounts of outbound data being sent to IPs associated with VPS providers not used by the organization [D3-NTA];
• Frequent DNS queries for a suspicious domain with seemingly random subdomains [D3-DNSTA];
• A sudden spike of connections to a server associated with a recently established domain [D3-NTCD]; and  
• Connections to internal services, such as webmail, from VPN providers frequently leveraged by this group for nefarious activity, such as Mullvad VPN [D3-NTCD].

Additionally, for organizations that can inspect the content of outbound HTTPS connections via break-and-inspect infrastructure, security teams should identify traffic matching the characteristics described in the Exfiltration section of this advisory.

Indicators of compromise (IOCs)

Flowerbed infrastructure

The following indicators have been attributed to use by LAUNDRY BEAR for their campaign targeting ZCS’s webmail service as of the publication of this advisory. (Disclaimer: Due to the frequency of operational structure changes by this group, these indicators are intended solely for historic attribution purposes. Some indicators, such as IPs, compromised emails, and domains, may be outdated, so organizations should check for current activity before acting on these IOCs.) Table 7 provides details about the server infrastructure used to host Flowerbed, and Table 8 lists the corresponding SHA-1 hash values for the Let’s Encrypt certificates used by that infrastructure [D3-IAA].

LAUNDRY BEAR has used the following email addresses to procure resources used for this campaign:

• ivanka.zurabishvili@proton[.]me,
• zmul1@buildandconsulting[.]com,
• garrysmithme@pinmx[.]net, and
• hostingclient@pinmx[.]net.

Phishing distribution

LAUNDRY BEAR primarily relied on ProtonMail for distribution of malicious email. However, as stated above, LAUNDRY BEAR’s more recent efforts likely have shifted to distributing the payload through previous victims.  

The following email addresses have distributed payloads attributed to this campaign:

• c.laurent.ejfa@proton[.]me,
• j.moreau.epsc@proton[.]me,
• liberty.insights@proton[.]me,
• certain email addresses (presumably compromised) at the isofts.kiev[.]ua domain (i.e., ending with @isofts.kiev[.]ua), and
• certain email addresses (presumably compromised) at the navs.edu[.]ua domain (i.e., ending with @navs.edu[.]ua).

Additionally, the following are SHA-256 hashes of email samples containing the malicious payload attributed to this campaign:

• 98df604ecc57f884a2e6ce3266a0013ad64455cac48442c2312cfa4765007aaf,
• 60db9abae75cd8ccc49dd7ea5feb41677566dcd442f12ebc5745ffd2810fb874,
• b1f5beb1175fc5c7d1806a2f0d900eb124c54f0286c5c52b66eea7a6633adb1d, and
• 1517b3caa495f6c4e832df9c75fc94667e3c233773f7fa4e056d5e30e5ead760.

Post-compromise artifacts

Currently, the script does not remove artifacts. This leaves additional opportunities to identify victims of this activity. While emphasis should always be placed on consistent monitoring of network traffic and endpoint activity, there are a variety of persistent artifacts described below that can be used to identify victims of this campaign.

This Ulej capability relies on creating a significant number of SOAP requests to collect account information for exfiltration. ZCS logs from these requests are stored, by default, in the /opt/zimbra/log/mailbox.log file [D3-PA]. A significant amount of SOAP request activity that aligns with what was described in the Persistence and credential access and Collection sections of this advisory could indicate a potential compromise. Specific examples of high-risk SOAP request activity might include:

• Many SearchGalRequest command requests from a single user over a short period of time;
• Use of the CreateAppSpecificPasswordRequest command, especially in cases where it is creating an Application Passcode named “ZimbraWeb”; and
• Use of the GetScratchCodesRequest command.

While LAUNDRY BEAR uses the localStorage property to track what days had emails previously exfiltrated, defenders can use this property to identify victims of this campaign and determine the scope of exfiltrated information [D3-PA]. Review of the items stored in that property for an organization’s ZCS webmail client page on an endpoint device could indicate compromise if there are items named with a format of zd_comp_YYYY-MM-DD, as explained in the Collection section of this advisory.

While Application Passcodes have non-malicious purposes, in this case instances of these passcodes with the name “ZimbraWeb” are almost certainly malicious. The ZCS webmail application can support 2FA natively and does not require the use of an Application Passcode, so there is no reason that there should be one named “ZimbraWeb.”

In instances where organizations identify victims of this campaign, they should also examine the inbox of the suspected victim for the original phishing email [D3-MA]. If an email that has a payload exploiting CVE-2025-66376 is discovered, steps should be taken immediately to identify and quarantine other instances of emails with similar body content, senders, and subject lines to prevent further exploitation and exfiltration.  

Remediation

In the event an organization identifies activity associated with this campaign, that organization should take steps to minimize further exploitation. The organization should consider requesting that employees minimize use of the ZCS webmail client until the organization updates to a patched version that is not vulnerable to CVE-2025-66376.

Organizations should use identifiers from the IOCs section of this report to identify any individuals compromised by this campaign and record the date(s) of compromise(s) to determine the scale and scope of emails exfiltrated.

All users from the organization should have all Application Passcodes and 2FA scratch keys revoked. Affected organizations should require all employees to change passwords in line with establishing minimum password strength requirements [CPG 3.B] and creating unique credentials [CPG 3.C], specifically noting that compromised employees might have had any password stored in a password manager exfiltrated.

Works cited

[1] Netherlands General Intelligence and Security Service (AIVD) and Netherlands Defence Intelligence and Security Service (MIVD). AIVD and MIVD identify a new Russian cyber threat actor. 2025. https://www.aivd.nl/site/binaries/site-content/collections/documents/2025/05/27/aivd-en-mivd-onderkennen-nieuwe-russische-cyberactor/Advisory+AIVD+en+MIVD+Public+report+on+new+cyber+actor.pdf

[2] Microsoft Corporation. New Russia-affiliated actor Void Blizzard targets critical sectors for espionage. 2025. https://www.microsoft.com/en-us/security/blog/2025/05/27/new-russia-affiliated-actor-void-blizzard-targets-critical-sectors-for-espionage/

[3] Palo Alto Networks Unit 42. Russian Global Webmail Espionage. 2026. https://unit42.paloaltonetworks.com/russian-webmail-espionage/ 

[4] Proofpoint. TA488 Targets Zimbra Mailservers with Half-Click Exploits. 2026. https://www.proofpoint.com/us/blog/threat-insight/ta488-zcs-exploit

[5] Seqrite. Operation GhostMail: Russian APT exploits Zimbra Webmail to Target Ukraine State Agency. 2026. https://www.seqrite.com/blog/operation-ghostmail-zimbra-xss-russian-apt-ukraine/  

Footnotes

¹ Národní úřad pro kybernetickou a informační bezpečnost
² Forsvarets Efterretningstjeneste
³ Välisluureamet
⁴ Sotilastiedustelu
⁵  Suojelupoliisi
⁶ Direction générale de la sécurité intérieure
⁷ Agence nationale de la sécurité des systèmes d’information
⁸ Agenzia Informazioni e Sicurezza Esterna
⁹ Agenzia Informazioni e Sicurezza Interna
¹⁰ Serviciul de Informații și Securitate al Republicii Moldova
¹¹ Agencja Wywiadu
¹² Służba Kontrwywiadu Wojskowego
¹³ Centro Nacional de Inteligencia
¹⁴ Nationellt Cybersäkerhetscenter
¹⁵ MITRE and ATT&CK are registered trademarks of The MITRE Corporation. MITRE D3FEND is a trademark of The MITRE Corporation.

Acknowledgements

The authoring agencies acknowledge the contributions to this advisory from Palo Alto Networks Unit 42 and Proofpoint.

Disclaimer of endorsement

The information and opinions contained in this document are provided "as is" and without any warranties or guarantees. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement, recommendation, or favoring by the United States Government, and this guidance shall not be used for advertising or product endorsement purposes.

Organizations have no obligation to respond or provide information back to the authoring organizations in response to this joint advisory. If, after reviewing the information provided, an organization decides to provide information to the authoring organizations, reporting must be consistent with all applicable laws and policies.

Purpose

This document was developed in furtherance of the authoring agencies’ cybersecurity missions, including their responsibilities to identify and disseminate threats, and to develop and issue cybersecurity specifications and mitigations. This information may be shared broadly to reach all appropriate stakeholders.

Contact

Appendix A: MITRE ATT&CK tactics and techniques

See Table 9 through Table 19 for all the threat actor tactics and techniques referenced in this advisory.