Read more of this story at Slashdot.

Read more of this story at Slashdot.

For May 2026, Apple released 82 unique CVEs across the three macOS versions: 79 for macOS Tahoe 26.5, 45 for macOS Sequoia 15.7.7, and 42 for macOS Sonoma 14.8.7. Since Apple doesn’t provide CVSS scores or other severity information, we’re left to speculate on which of these bugs is the most severe. However, there are a couple that stand out.

-              CVE-2026-28819 (Wi-Fi) stands out as the strongest candidate for the most severe as it states, “An app may be able to execute arbitrary code with kernel privileges.” The combination of arbitrary code execution at the kernel level is about as bad as it gets on a severity scale. Plus, it affects all three macOS versions (Tahoe, Sequoia, and Sonoma).

-              CVE-2026-43668 (mDNSResponder) also piques my interest since, “A remote attacker may be able to cause unexpected system termination or corrupt kernel memory.” The remote attack vector with kernel memory corruption on all three OS versions makes this a serious one, especially since mDNSResponder is always running.

-              CVE-2026-28972 (Kernel) This one states that “An app may be able to cause unexpected system termination or write kernel memory.” An out-of-bounds write directly into kernel memory on all three OS versions. This one may also have implications in the upcoming Pwn2Own Berlin contest.

Here’s a look at all the bugs released by Apple this month:

CVE ID	Component	Impact	macOS Tahoe 26.5	macOS Sequoia 15.7.7	macOS Sonoma 14.8.7
CVE-2026-28991	Accelerate	An app may be able to cause a denial-of-service	Yes	No	No
CVE-2026-28988	Accounts	An app may be able to bypass certain Privacy preferences	Yes	No	No
CVE-2026-28959	APFS	An app may be able to cause unexpected system termination	Yes	Yes	Yes
CVE-2026-28995	App Intents	A malicious app may be able to break out of its sandbox	Yes	No	No
CVE-2026-1837	AppleJPEG	Processing a maliciously crafted image may lead to a denial-of-service	Yes	No	No
CVE-2026-28956	AppleJPEG	Processing a maliciously crafted media file may lead to unexpected app termination or corrupt process memory	Yes	Yes	Yes
CVE-2026-39869	Audio	Processing an audio stream in a maliciously crafted media file may terminate the process	Yes	Yes	Yes
CVE-2026-28922	CoreMedia	An app may be able to access private information	Yes	Yes	Yes
CVE-2026-28936	CoreServices	Processing a maliciously crafted file may lead to unexpected app termination	Yes	No	Yes
CVE-2026-28918	CoreSymbolication	Parsing a maliciously crafted file may lead to an unexpected app termination	Yes	No	No
CVE-2026-28878	Crash Reporter	An app may be able to enumerate a user's installed apps	No	Yes	No
CVE-2026-28915	CUPS	An app may be able to gain root privileges	Yes	Yes	Yes
CVE-2026-43659	FileProvider	An app may be able to access sensitive user data	Yes	Yes	Yes
CVE-2026-28923	GPU Drivers	A malicious app may be able to break out of its sandbox	Yes	Yes	Yes
CVE-2026-28925	HFS	An app may be able to cause unexpected system termination or write kernel memory	Yes	Yes	Yes
CVE-2025-43524	Icons	An app may be able to break out of its sandbox	No	Yes	Yes
CVE-2026-43661	ImageIO	Processing a maliciously crafted image may corrupt process memory	Yes	No	No
CVE-2026-28977	ImageIO	Processing a maliciously crafted file may lead to unexpected app termination	Yes	Yes	Yes
CVE-2026-28990	ImageIO	Processing a maliciously crafted image may corrupt process memory	Yes	Yes	Yes
CVE-2026-28978	Installer	A malicious app may be able to break out of its sandbox	Yes	Yes	Yes
CVE-2026-28992	IOHIDFamily	An attacker may be able to cause unexpected app termination	Yes	Yes	Yes
CVE-2026-28943	IOHIDFamily	An app may be able to determine kernel memory layout	Yes	Yes	Yes
CVE-2026-28969	IOKit	An app may be able to cause unexpected system termination	Yes	Yes	Yes
CVE-2026-43655	IOSurfaceAccelerator	An app may be able to cause unexpected system termination or read kernel memory	Yes	No	No
CVE-2026-43654	Kernel	An app may be able to disclose kernel memory	Yes	Yes	Yes
CVE-2026-28908	Kernel	An app may be able to modify protected parts of the file system	Yes	Yes	Yes
CVE-2026-28954	Kernel	A maliciously crafted disk image may bypass Gatekeeper checks	Yes	Yes	Yes
CVE-2026-28897	Kernel	A local user may be able to cause unexpected system termination or read kernel memory	Yes	Yes	Yes
CVE-2026-28952	Kernel	An app may be able to cause unexpected system termination	Yes	Yes	Yes
CVE-2026-28951	Kernel	An app may be able to gain root privileges	Yes	Yes	Yes
CVE-2026-28972	Kernel	An app may be able to cause unexpected system termination or write kernel memory	Yes	Yes	Yes
CVE-2026-28986	Kernel	An app may be able to cause unexpected system termination	Yes	Yes	Yes
CVE-2026-28987	Kernel	An app may be able to leak sensitive kernel state	Yes	Yes	Yes
CVE-2026-28983	LaunchServices	A remote attacker may be able to cause a denial of service	Yes	No	No
CVE-2026-28929	Mail Drafts	Replying to an email could display remote images in Mail in Lockdown Mode	Yes	Yes	Yes
CVE-2026-43653	mDNSResponder	An attacker on the local network may be able to cause a denial-of-service	Yes	No	Yes
CVE-2026-28985	mDNSResponder	An attacker on the local network may be able to cause a denial-of-service	Yes	No	No
CVE-2026-43668	mDNSResponder	A remote attacker may be able to cause unexpected system termination or corrupt kernel memory	Yes	Yes	Yes
CVE-2026-43666	mDNSResponder	An attacker on the local network may be able to cause a denial-of-service	Yes	Yes	Yes
CVE-2026-28941	Model I/O	Processing a maliciously crafted file may lead to a denial-of-service or potentially disclose memory contents	Yes	Yes	No
CVE-2026-28940	Model I/O	Processing a maliciously crafted image may corrupt process memory	Yes	Yes	No
CVE-2026-28961	Network Extensions	An attacker with physical access to a locked device may be able to view sensitive user information	Yes	No	No
CVE-2026-28906	Networking	An attacker may be able to track users through their IP address	Yes	Yes	Yes
CVE-2026-28840	PackageKit	An app may be able to gain root privileges	No	Yes	Yes
CVE-2026-43656	Quick Look	Parsing a maliciously crafted file may lead to an unexpected app termination	Yes	Yes	Yes
CVE-2026-43652	Sandbox	An app may be able to access protected user data	Yes	No	No
CVE-2026-39870	SceneKit	Processing a maliciously crafted image may corrupt process memory	Yes	Yes	Yes
CVE-2026-28846	SceneKit	A remote attacker may be able to cause unexpected app termination	Yes	Yes	Yes
CVE-2026-28993	Shortcuts	An app may be able to access user-sensitive data	Yes	Yes	Yes
CVE-2026-28848	SMB	A remote attacker may be able to cause unexpected system termination	Yes	Yes	No
CVE-2026-28930	Spotlight	An app may be able to access protected user data	Yes	No	No
CVE-2026-28974	Spotlight	An app may be able to cause a denial-of-service	Yes	Yes	No
CVE-2026-28996	Storage	An app may be able to access sensitive user data	Yes	Yes	Yes
CVE-2026-28919	StorageKit	An app may be able to gain root privileges	Yes	Yes	Yes
CVE-2026-28924	Sync Services	An app may be able to access Contacts without user consent	Yes	Yes	Yes
CVE-2026-39871	TV App	An app may be able to observe unprotected user data	Yes	Yes	Yes
CVE-2026-28976	UserAccountUpdater	An app may be able to gain root privileges	Yes	No	No
CVE-2026-43660	WebKit	Processing maliciously crafted web content may prevent Content Security Policy from being enforced	Yes	No	No
CVE-2026-28907	WebKit	Processing maliciously crafted web content may prevent Content Security Policy from being enforced	Yes	No	No
CVE-2026-28962	WebKit	Processing maliciously crafted web content may disclose sensitive user information	Yes	No	No
CVE-2026-43658	WebKit	Processing maliciously crafted web content may lead to an unexpected Safari crash	Yes	No	No
CVE-2026-28905	WebKit	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28847	WebKit	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28904	WebKit	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28955	WebKit	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28903	WebKit	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28953	WebKit	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28902	WebKit	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28901	WebKit	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28913	WebKit	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28883	WebKit	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28958	WebKit	An app may be able to access sensitive user data	Yes	No	No
CVE-2026-28917	WebKit	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28947	WebKit	Processing maliciously crafted web content may lead to an unexpected Safari crash	Yes	No	No
CVE-2026-28946	WebKit	Processing maliciously crafted web content may lead to an unexpected Safari crash	Yes	No	No
CVE-2026-28942	WebKit	Processing maliciously crafted web content may lead to an unexpected Safari crash	Yes	No	No
CVE-2026-28971	WebKit	A malicious iframe may use another website's download settings	Yes	No	No
CVE-2026-28944	WebRTC	Processing maliciously crafted web content may lead to an unexpected process crash	Yes	No	No
CVE-2026-28819	Wi-Fi	An app may be able to execute arbitrary code with kernel privileges	Yes	Yes	Yes
CVE-2026-28994	Wi-Fi	An attacker in a privileged network position may be able to perform denial-of-service attack using crafted Wi-Fi packets	Yes	Yes	Yes
CVE-2026-28914	zip	A maliciously crafted ZIP archive may bypass Gatekeeper checks	Yes	No	No
CVE-2026-28920	zlib	Visiting a maliciously crafted website may leak sensitive data	Yes	Yes	Yes

We’ll continue these macOS updates if people find them useful. Stay tuned for the regularly schedule Patch Tuesday blog covering Adobe and Microsoft.

Day Three added to an already historic event, bringing the final totals to $1,298,250 awarded for 47 unique 0-day vulnerabilities across three days of competition. DEVCORE claimed the title of Master of Pwn with a commanding 50.5 points and $505,000 — a dominant performance across all three days. STARLabs SG finished in second with 25 points and $242,500, followed by Out Of Bounds in third with 12.75 points and $95,750.

Congratulations to all the researchers who participated, and a special thank you to OffensiveCon for hosting. We'll see you at the next Pwn2Own.

Here are the results of Day Three:

SUCCESS/COLLISION - Sina Kheirkhah (@SinSinology) of Summoning Team (@SummoningTeam) used two bugs to exploit Red Hat Linux, but one of the bugs was previously known. He still earns $7,000 and 1.5 Master of Pwn points.

SUCCESS - Le Tran Hai Tung (@tacbliw), dungnm (@dungnm_) and hieuvd (@gr4ss341) of Viettel Cyber Security (@vcslab) used an integer overflow to escalate privileges on #Windows 11. Their 5th round win nets them $7,500 and 3 Master of Pwn points.

SUCCESS - Satoki Tsuji (@satoki00) of Ikotas Labs, Inc. abused an external control to exploit OpenAI Codex and pop a host of calcs. He earns $20,000 and 4 Master of Pwn points.

FAILURE - Unfortunately, Giuseppe Calì of Summoning Team (@SummoningTeam) could not get their exploit of VMware ESXi working within the time allotted.

COLLISON - Although successful on stage, Emanuele Barbeno, Cyrill Bannwart, Yves Bieri, Lukasz D., Urs Mueller (@compasssecurity) of Compass Security targeted Anthropic Claude Code, hitting a one-vulnerability collision with a previous attempt and earning $20,000 and 2 Master of Pwn points.

SUCCESS - Hyunwoo Kim (@v4bel) chained a use-after-free and uninitialized memory bug to escalate privileges on Red Hat Enterprise Linux for Workstations in the fourth round, earning $5,000 and 2 Master of Pwn points.

SUCCESS - splitline (@splitline) of DEVCORE Research Team chained 2 bugs to exploit Microsoft SharePoint, earning $100,000 and 10 Master of Pwn points.

SUCCESS - Nguyen Hoang Thach (@hi_im_d4rkn3ss) of STARLabs SG (@starlabs_sg) used a Memory Corruption bug to exploit VMware ESXi with the Cross-tenant Code Execution add-on, earning $200,000 and 20 Master of Pwn points.

COLLISON - While Byung Young Yi (@yibarrack) of Out Of Bounds successfully demonstrated their exploit of Anthropic Claude Code, the bug used had been previously disclosed. They still earn $20,000 and 2 Master of Pwn points.

For Jun 2026, Apple released 37 unique CVEs across iOS 26.5.2 / iPadOS 26.5.2, macOS Tahoe 26.5.2, Safari 26.5.2. Since Apple doesn’t provide CVSS scores or other severity information, we’re left to speculate on which of these bugs is the most severe. The overwhelming majority (31 of 37) are WebKit/WebRTC bugs reachable through malicious web content. Most of those are crash/DoS bugs rather than code execution, so the real risk lives in the small set of kernel bugs and the handful of WebKit sandbox escapes. However, there are a couple that stand out.

-    CVE-2026-43724 (Kernel) – According to Apple, “An app may be able to cause unexpected system termination or write kernel memory.” A kernel memory write is the highest-value primitive here: it's the privilege-escalation half of a full exploit chain and leads to complete device control. The bug was credited to Hyunwoo Kim (@v4bel), who is known to be a serious kernel researcher.

-    CVE-2026-39868 (Kernel) – Another kernel bug, this one could “cause unexpected system termination or corrupt kernel memory.” This is kernel memory corruption, and notably credited to a roster of elite offensive researchers (STAR Labs, Positive Technologies, Baidu Security). This kind of attribution usually signals a weaponizable, possibly Pwn2Own-grade bug rather than a theoretical crash.

-    CVE-2026-43725 / CVE-2026-43701 (WebKit) – Apple states these bugs could allow a website to process restricted web content outside the sandbox. I'm flagging this sandbox-escape pair over the many WebKit crash bugs because a sandbox escape is the bridge that turns a web-content bug into a path toward the kernel issues above. It's the most dangerous remotely-triggered class in the release.

Here’s a look at all the bugs released by Apple this month:

We’ll continue these macOS updates if people find them useful. Stay tuned for the regularly schedule Patch Tuesday blog covering Adobe and Microsoft.

Executive summary 

A group of Russian state-supported cyber actors has been targeting and compromising various Western government and commercial organizations using the Zimbra Collaboration Suite (ZCS) software since at least July 2025. The Russian state-supported advanced persistent threat (APT) group’s activity is tracked in the cybersecurity community under several names (see Cybersecurity industry tracking), primarily as “LAUNDRY BEAR,” a name initially coined by the Netherlands General Intelligence and Security Service (AIVD) and Defence Intelligence and Security Service (MIVD) [1].

LAUNDRY BEAR’s targeting is almost certainly to gather sensitive information for the Russian Federation, with these actors primarily focusing on the covert acquisition of email data. Previous campaigns indicated LAUNDRY BEAR relied on unsophisticated initial access techniques—including password spraying, phishing, and pass-the-cookie—allowing the group to successfully run high-volume operations. The latest campaign targeting ZCS uses a novel exploit that was a zero-day vulnerability when first exploited and continues to be successfully exploited. The vulnerability, Common Vulnerabilities and Exposures (CVE) CVE-2025-66376, was patched in November 2025. This demonstrates LAUNDRY BEAR’s intent and ability to deploy increasingly sophisticated technical capabilities.

Unlike traditional phishing campaigns that persuade a user into taking an action, such as clicking a link or opening a file, LAUNDRY BEAR’s latest campaign leverages a view-based exploit that only requires a user to view a malicious email within a vulnerable version of the webmail service. Once viewed, the exploit attempts to exfiltrate the victim’s last 90 days of email communications, the organization email directory (i.e., Global Address List [GAL]), and other sensitive information to servers controlled by LAUNDRY BEAR. The exploit also attempts to establish persistent access to victim accounts through a variety of means as detailed in the Persistence and credential access section.

This Cybersecurity Advisory (CSA) warns of this ongoing malicious threat activity and urges organizations to update their vulnerable software and implement additional mitigations to thwart these Russian state-supported actors’ continued success. The CSA is being released by the following authoring and co-sealing agencies:

• United States National Security Agency (NSA)
• United States Federal Bureau of Investigation (FBI)
• Netherlands Defence Intelligence and Security Service (MIVD)
• Netherlands General Intelligence and Security Service (AIVD)
• United States Cybersecurity and Infrastructure Security Agency (CISA)
• United States Defense Counterintelligence and Security Agency (DCSA)
• United States Department of Defense Cyber Crime Center (DC3)
• United States Department of the Treasury
• United States Naval Criminal Investigative Service (NCIS)
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Communications Security Establishment Canada’s (CSE’s) Canadian Centre for Cyber Security (Cyber Centre)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• United Kingdom National Cyber Security Centre (NCSC-UK)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)¹
• Danish Defence Intelligence Service (DDIS)²
• Estonian Foreign Intelligence Service (EFIS)³
• Finnish Defence Intelligence (FDI)⁴
• Finnish Security and Intelligence Service (SUPO)⁵
• French General Directorate for Internal Security (DGSI)⁶
• French National Cybersecurity Agency (ANSSI)⁷
• Italian External Intelligence and Security Agency (AISE)⁸
• Italian Internal Intelligence and Security Agency (AISI)⁹
• Security and Intelligence Service of the Republic of Moldova (SIS RM)¹⁰
• Polish Foreign Intelligence Agency (AW)¹¹
• The Military Counterintelligence Service of Poland (SKW)¹²
• Spain National Intelligence Centre (CNI)¹³
• Sweden National Cyber Security Centre (NCSC-SE)¹⁴

The authoring agencies urge any organizations using ZCS to implement the recommendations listed within the Mitigations section of this advisory to reduce the risk associated with this activity. This CSA also includes specific remediations for organizations to implement if they discover the presence of the listed Indicators of compromise (IOCs).  

As more organizations update their ZCS software based on this CSA, LAUNDRY BEAR may discontinue the current campaign exploiting this vulnerability; however, based on the success of this and previous campaigns, it is very likely that the group will continue to target ZCS and other email systems used by organizations in Western countries. The actors will almost certainly continue to rely on email to engage potential victims by exploiting novel vulnerabilities and, when necessary, use social engineering techniques to assist with their efforts. The authoring agencies recommend organizations regularly update their mail service software and continuously monitor their email systems and emails for malicious activity.

For a downloadable list of IOCs, see:

• AA26-204A.stix.xml (STIX XML)
• AA26-204A.stix.json (STIX JSON)

Cybersecurity industry tracking

The cybersecurity industry provides overlapping cyber threat intelligence, indicators of compromise (IOCs), and mitigation recommendations related to these Russian state-supported cyber actors. While not exhaustive, the following are threat group names commonly used for these actors within the cybersecurity community:

• LAUNDRY BEAR
• Void Blizzard [2]
• CL-STA-1114 [3]
• TA488 (formerly UNK_PitStop) [4]

Note: Cybersecurity companies have different methods of tracking and attributing cyber actors, and this may not be a 1:1 correlation to the U.S. government’s understanding for all activity related to these groupings.

Background

Public advisories from Netherlands General Intelligence and Security Service (AIVD), Netherlands Defence Intelligence and Security Service (MIVD), and Microsoft highlighted these Russian state-supported advanced persistent threat (APT) actors in May 2025, calling them LAUNDRY BEAR and Void Blizzard respectively [1] [2]. Both advisories assessed that the group was engaged in malicious cyber activity as early as April 2024.  

The May 2025 advisories highlighted a cluster of activity targeting cloud-based email environments, including Microsoft Exchange in particular, and abusing legitimate APIs to perform data exfiltration in bulk [T1114.002]. The group relied on unsophisticated means of initial access, including procuring stolen credentials on criminal marketplaces [T1078], and using social engineering techniques to lure targets into interacting with a malicious site masquerading as a legitimate one. As of April 2025, one of these sites resembled a European Defence & Security Summit registration portal that required registrants to sign in to their Microsoft account to view. Once a user entered their Microsoft credentials into this malicious site, LAUNDRY BEAR’s modified version of the open source adversary emulation toolkit, Evilginx, intercepted the user’s credentials. LAUNDRY BEAR then used this authentication data, including passwords and session tokens, to access the compromised account and conduct mass email exfiltration, as well as harvest other information. This method of compromise is commonly known as an adversary-in-the-middle (AiTM) technique [T1557].  

Beginning around July 2025, LAUNDRY BEAR shifted toward a more technical method of email compromise, highlighting their continued efforts to covertly acquire email communications from a variety of Western organizations of interest and deliver them to the Russian Federation. Using a custom-developed capability [T1587.001] named “Улей” or “Ulej” (Russian for beehive), LAUNDRY BEAR successfully targeted and exfiltrated sensitive user information from organizations who use the Zimbra Collaboration Suite (ZCS) product [T1114]. Data LAUNDRY BEAR attempted to exfiltrate from compromised accounts included:

• Last 90 days of emails,
• Email address,
• Password [T1589.001],
• Global Address List (GAL) [T1087],
• Two-factor authentication (2FA) tokens, and
• Newly-created Application Passcode [T1098].

The covert and persistent nature of this activity, along with the absence of any known financial extortion, almost certainly indicates this group’s involvement in espionage activities with Russian government backing. Additionally, extensive Ukrainian targeting, prior to use against U.S. and other NATO allies, outlines an increasing trend within Russian cyber threat groups to target Ukrainian users first—both as a priority target and as a testbench for malicious cyber techniques before broader global deployment.

Targeting details

LAUNDRY BEAR has targeted and compromised users in various organizations, including those associated with:

• the Defense Industrial Base (DIB),  
• the federal and local government,
• education,
• energy,
• law enforcement,  
• media,  
• non-governmental organizations, and
• technology.

Technical details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise framework, version 19. This advisory also uses MITRE D3FEND^TM version 1.4.0¹⁵. See Appendix A and Appendix B for tables of the activity mapped to MITRE ATT&CK and D3FEND tactics, techniques, and countermeasures.

Ulej is a novel data exfiltration and aggregation capability, that currently (as of the publication of this report) supports a campaign specifically targeting users of ZCS webmail servers. This capability is used to exploit CVE-2025-66376 [Common Weakness Enumeration (CWE) CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')], but likely could be adapted to exploit other vulnerabilities. It exfiltrates emails and other sensitive user data from a victim’s system immediately after exploitation and stores the data in an actor-controlled unattributable virtual private server (VPS) [T1074.002] running LAUNDRY BEAR’s “Flowerbed” collection framework. The collected data is almost certainly further exfiltrated to internal network resources for review and long-term retention.

Reconnaissance

LAUNDRY BEAR uses the Ulej capability to exploit the CVE-2025-66376 vulnerability in organizations using ZCS. This campaign’s targeted victimology and limited exploitation capabilities likely indicate this group manually identifies and targets the victim organizations. LAUNDRY BEAR likely identifies organizations with public-facing Zimbra infrastructure by port scanning [T1595] and fingerprinting datasets easily procured through various commercial vendors [T1596.005].  

After identifying a target organization, the group likely compiles email addresses for individual users to target with the exploit [T1589.002] from datasets offered by commercial vendors [T1597.002], open source intelligence [T1593], or previously exfiltrated data [T1597].  

Resource development

The actors procure VPSs from a variety of providers [T1583.003], including those with Know Your Customer (KYC) requirements, and often use fabricated identities. LAUNDRY BEAR primarily uses Mullvad VPN [T1583] when interacting with these servers, further demonstrating the group’s intent to mask their identity and maintain operations security (OPSEC). After the server is provisioned, an automated process deploys the Docker containers necessary for Ulej’s Flowerbed framework [T1608], which then receives and aggregates the data Ulej exfiltrates. These servers are typically only used for 7-60 days before moving to new infrastructure.

Flowerbed framework

Flowerbed is a Python project that uses Docker for containerization. The project includes four different Docker containers:

• Catcher,
• Certbot,
• Nginx, and
• Gardener.

Catcher acts as both a DNS and HTTP server to receive and aggregate exfiltrated victim information [T1048]. For additional information on Catcher, refer to the Exfiltration section of this advisory. Flowerbed’s next container, Certbot, is based on one of the official Certbot containers, which allows for automated generation of Let’s Encrypt certificates using DNS challenges through Cloudflare. This certificate can then be used by the Nginx container, which serves as an HTTPS reverse proxy for Catcher, enabling Flowerbed to disguise some of its exfiltration activity through an encrypted communications channel [T1048.002]. The Nginx reverse proxy also validates that the Server Name Indicator (SNI) value contains “*.i.*” prior to forwarding the traffic to Catcher. If the SNI does not contain that string, the Nginx server returns a 444 error to the client. This is likely an attempt to reject non-Ulej connections. Finally, the Gardener container functions as a health check for the Catcher service. Gardener is a simple Python script that validates Catcher correctly receives and processes data.

The simplistic Flowerbed codebase has indications that artificial intelligence (AI) played a role in its development. This highlights how AI is increasingly being used to develop malicious capabilities [T1588.007]. The dependence on AI for a simple capability, such as Flowerbed, alongside a previous reliance on open source capabilities, such as Evilginx2 [T1588.002], likely indicates a lack of advanced technical knowledge within LAUNDRY BEAR, especially in relation to true software development capabilities.

Initial access

To gain initial access, LAUNDRY BEAR sends an email containing a malicious JavaScript payload to the target [T1566]. Through exploitation of CVE-2025-66376, this JavaScript payload is immediately executed once the user views the malicious email [T1203], such as the one shown in Figure 1, in the ZCS webmail platform. Since at least November 2025, LAUNDRY BEAR began sending these phishing emails from victim infrastructure through compromised accounts [T1199], as shown in the email metadata in Figure 2. These compromised accounts were likely previous victims of this, or another LAUNDRY BEAR, campaign and their use is intended to further obfuscate and frustrate anti-phishing tools and training.

According to the National Vulnerability Database (NVD), CVE-2025-66376 was initially published on 5 January 2026. This vulnerability allows for execution of a JavaScript payload included in email content due to improper sanitization of Cascading Style Sheet’s (CSS) @import directives within an email [5]. Because the activity attributed to this campaign began in July 2025—months before Synacor released a patch and the CVE was published—the payload initially exploited a zero-day vulnerability at that time [T1587.004].  

Utilization of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability.

Hidden in LAUNDRY BEAR’s email is a Base64 encoded payload within the “onload” field of a Scalable Vector Graphics (SVG) element [T1027.017], as shown in Figure 3. Leading up to the inclusion of this payload in the SVG element are various instances of @import directives, as required to leverage CVE-2025-66376. This payload includes an XOR encrypted final script encoded in a Base64 inner payload (see Figure 3) [T1027.013]. The outer payload decodes and decrypts the inner payload using an XOR function and a hardcoded key and then executes the script contained within the inner payload containing the collection and exfiltration logic. By changing the key used for the XOR encryption of the inner payload or adding additional @import directives with non-functional code [T1027.010], LAUNDRY BEAR can easily generate new payloads that bypass basic threat detection signatures. This malicious payload attempts to collect and exfiltrate information in 12 asynchronous stages [T1119]. The stages in order of appearance within the payload are as follows:

1. sendStartPing,
2. gather_email,
3. gather_environment,
4. gather_2fa_codes,
5. gather_app_password,
6. gather_device_status,
7. gather_oauth_consumers,
8. gather_autocomplete_password,
9. enable_mail_protocols,
10. gather_gal,
11. sendArchives, and
12. sendFinishPing. 

Use of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability [T1587].

Persistence and credential access

To establish sustained persistence into the victim’s email account, the script attempts to modify account preferences and collect authentication information. Any collected credentials are later exfiltrated, as further described in the Exfiltration section below. Other campaigns attributed to LAUNDRY BEAR also demonstrated the group’s ability to circumvent multi-factor authentication through session token replay [T1550.004], and the Zimbra campaign follows a similar trend.

The script used in this campaign tries to discover the victim’s email address during the gather_email stage [T1087]. The script searches for this email address in two ways. First, it examines the batchInfoResponse variable, which an HTML script element on the webpage can define, for an email address. Even if the script finds an email address there, it also checks whether it acquired a Cross-Site Request Forgery (CSRF) token as described later in the Collection section of this advisory. If so, the script uses the “GetIdentitiesRequest” Simple Object Access Protocol (SOAP) command under the “ZimbraAccount” namespace to determine the victim’s email address [T1185] and then exfiltrates it. However, if the script does not have a CSRF token or the SOAP request fails, the script exfiltrates the email value recovered from the first method instead. If both attempts fail to capture the victim’s email, the script sends a JavaScript Object Notation (JSON) payload with a key of “email” and value of null over HTTPS and does not attempt DNS exfiltration.

During the gather_autocomplete_password stage, the script attempts to collect the victim’s saved password via the autocomplete feature of the victim’s password manager. The script injects two HTML div elements requesting login credentials onto the page outside of the victim’s view, as shown in Figure 4 and Figure 5. After waiting five seconds, the script then attempts to extract the password provided automatically by the password manager from the input element shown in Figure 4. If there is no value in that input field, it checks the password input field shown in Figure 5. If neither input field contains a value, a JSON payload with a key of “autocomplete_password” and value of null is sent over HTTPS and DNS exfiltration is not attempted.

LAUNDRY BEAR almost certainly relies on a mail client using the Internet Message Access Protocol (IMAP) for persistent access to the victim’s mailbox. During the enable_mail_protocols stage, a SOAP request leveraging the “ModifyPrefsRequest” command under the “ZimbraAccount” namespace is sent. This request attempts to set the “zimbraPrefImapEnabled” preference to TRUE. While the default setting for “zimbraPrefImapEnabled” is not well documented, this action is almost certainly intended to ensure that IMAP access to the victim’s mailbox is enabled.

ZCS does not support 2FA for some mail clients, including IMAP. To support users who rely on IMAP clients, ZCS allows for the generation of Application Passcodes. Application Passcodes are randomly generated passwords that can be used for clients that cannot support the normal 2FA process to authenticate. During the gather_app_password stage, the script makes a SOAP request using the “CreateAppSpecificPasswordRequest” command under the “ZimbraAccount” namespace to create a new Application Passcode [T1556.006]. The SOAP request uses “ZimbraWeb” as the name of the application.

Additionally, the script also attempts to collect 2FA tokens. During the gather_2fa_codes stage, the script makes a SOAP request using the “GetScratchCodesRequest” command under the “ZimbraAccount” namespace. The script then attempts to exfiltrate any non-null 2FA codes collected this way. The number of codes can vary, and each code is exfiltrated to Flowerbed individually.

Collection

As demonstrated in the Persistence and credential access section, this script relies heavily on SOAP requests to collect victim information. To make these requests, the script aims to acquire the victim’s current CSRF token, which it attempts to access within the webpage’s local storage using localStorage.getItem("csrfToken"). If the script is unable to acquire this CSRF token, it will be unable to make any SOAP requests. In addition to the SOAP commands documented in the Persistence and credential access section, other SOAP commands executed to collect victim information are shown in Table 1.

The script attempts to collect the victim’s GAL through brute force by searching for each two-character combination from a character set of “abcdefghijklmnopqrstuvwxyz1234567890.-_”. These queries are conducted using 20 batches of SOAP requests with 77 “SearchGalRequest” SOAP commands in each batch except for the last request containing only 58.

During the gather_environment stage, the script attempts to determine which type of ZCS webmail client the victim is using. The script checks the user’s current URL to determine the client type being used, checking for certain indicators (shown in Table 2) to determine the client type. The corresponding value is then used as the payload when exfiltrating the client type.

As part of collection, the script attempts to harvest any emails not marked as “junk” from the last 90 days from the victim’s account. Emails are collected daily by an HTTP GET request to the URL path, “/home/~/?fmt=tgz&meta=0&query=date:-{DAY_OFFSET}d AND (not in:junk)”. The {DAY_OFFSET} value would be between 0 and 89 representing how many days ago the email was sent or received. To prevent redundant collection and exfiltration of emails, a variable with a name based on the email date being queried, using a format of zd_comp_YYYY-MM-DD, and value of true, is saved to the window.top.localStorage property. This variable is saved regardless of whether the email is successfully exfiltrated.  

According to Mozilla documentation, if the user is not in a private browsing session, any data stored to localStorage does not typically expire. This means that if the user happens to execute the script again from the same computer, the script avoids attempting to re-exfiltrate previously captured emails. However, the script always attempts to pull any emails with a {DAY_OFFSET} of zero. In other words, the script always pulls emails sent or received the same day it is run. After email results are returned from the query for each day of email activity, those results are then passed to Flowerbed as described in the Exfiltration section.

The script also provides LAUNDRY BEAR with telemetry on any errors that occur during the collection process. This is accomplished by executing any collection or exfiltration code through helper functions that contain error handling logic. If an error occurs, a payload containing information on the error itself, the context of the error happening, and the stage in which the error occurred is sent to Flowerbed as described in the Exfiltration section below. For cases where the error occurs within a SOAP request, “:api” is concatenated to the stage value in the payload. If an error occurs during the batch SOAP requests that occur when collecting the GAL of the victim, the stage value will use a format of gather_gal:{VAL}:api. The {VAL} placeholder indicates which batch request, a number from 0 to 19, the error occurred in. Errors that occur during the password autocomplete interception process will use “gather_autocomplete_password:dom” for the stage value. Finally, if an error occurs when attempting to collect or exfiltrate a specific day’s emails, the stage will include which day the error occurred on, using the previously defined placeholder {DAY_OFFSET}, with a format of sendArchive:day-{DAY_OFFSET}.

Exfiltration

At the end of each stage in the collection process, the script attempts to exfiltrate acquired information to Flowerbed. The script primarily relies on two forms of data exfiltration: DNS [T1048.003] and HTTPS. Some information is exfiltrated over both the DNS and HTTPS channels.

Prior to exfiltration, a randomized 10- or 11-character alphanumeric string is generated as an identifier for the victim. This identifier is included in the URL of both the DNS- and HTTPS-based exfiltration.  

DNS exfiltration

DNS exfiltration occurs through DNS A record queries. To ensure data exfiltrated through DNS is not corrupted when traversing through non-actor-controlled DNS infrastructure, Ulej maintains compliance with RFC 1035, Domain Names - Implementation and Specification, specifically accounting for the case insensitivity and subdomain length requirements. Base32 encoding is used to create a case-insensitive payload. Once the payload is encoded, a period (“.”) is added every 60 characters to ensure each subdomain is under 63 characters long. The script then creates a new image object sourced from a URL with the scheme defined in Figure 6. Any traffic involving DNS exfiltration will have “d-“ prefixing the victim identifier, and the subdomain immediately following indicates the type of information being exfiltrated.

When the script generates an image object, the browser tries to retrieve the complete domain of the URL specified as the source of the image. This triggers a DNS request sent to the actor-controlled server and processed by Flowerbed. Table 3 lists both the information exfiltrated via DNS and their corresponding data type identifiers in the DNS queries.  

HTTPS exfiltration

Any information exfiltrated via DNS is also exfiltrated through HTTPS, as well as additional data including email content, contacts, attachments, and error logging information. By using Let’s Encrypt certificates, this group can quickly deploy new infrastructure and leverage encrypted HTTPS communications with valid server certificates when exfiltrating information from the victim’s environment. The HTTPS exfiltration capability only uses two HTTP content types, defined in Table 4. Traffic associated with HTTPS exfiltration will use the URL scheme shown in Figure 7.  

Some of the data transmitted via HTTPS uses the standard JSON content type format. The script includes the information in a POST request to actor-controlled infrastructure.  

Table 5 provides a summary of the JSON-based exfiltration.

The script transmits all HTTPS exfiltration not identified in Table 5 using the Octet-Stream content type as binary data. The POST requests for this method include a filename in the “X-Filename” header. Traditionally, developers use headers prefixed with “X-” to denote custom headers that do not follow a defined standard. The purpose of including this header remains unclear since the Catcher capability ignores the provided filename when saving the data. Table 6 summarizes the data exfiltrated in this format.

The script sends all exfiltrated data identified in Table 6 to the Catcher service exactly as received from the SOAP request in a JSON payload, except for email exfiltration. For email exfiltration, the script sends it as a GZIP compressed archive [T1560]. Although most of the exfiltration consists of valid JSON, the script still attempts to exfiltrate all information identified in Table 6 using the application/octet-stream content typing rather than application/json.

At the beginning and end of the collection and exfiltration activity, during the sendStartPing and sendFinishPing stages respectively, the script submits a POST request with a JSON payload to indicate that the script is starting or finishing execution. Throughout execution, the script also logs error events and send the logs using similar JSON payloads. The script sends the JSON in a POST request to the URL documented in Figure 2, using a URL path of “/v/p” and with a “subtype” key that shows which type of action it logged (start, finish, or error).  

Catcher

Ulej exfiltrates information to Flowerbed to be handled by a service named Catcher. Catcher is a containerized Python application, running in Docker as part of Flowerbed, which is detailed in the Resource development section. It receives exfiltrated data and temporarily stores it, enabling its eventual transfer to infrastructure designed for long-term, secure storage.

Catcher acts as an HTTP server over port 8000 and a DNS server on port 53. As described in the Resource development section, the Flowerbed project uses an additional Docker container running an Nginx reverse proxy to enable HTTPS support. This reverse proxy uses a certificate generated by Let’s Encrypt and forwards all traffic with an SNI containing “*.i.*” to port 8000 within the Catcher container.

The DNS service can accept A, AAAA, MX, TXT, and CAA queries. For any MX, AAAA, or CAA queries, the server will always provide an empty response. The system only supports TXT records as needed to process Automatic Certificate Management Environment (ACME) requests, which enable the assignment of Let’s Encrypt certificates. If the server receives an A query, Catcher will always respond with the public IP address of the Flowerbed server.  

However, if a query includes a domain formatted as shown in Figure 6 and Figure 7, the service saves a log file in JSON format to disk containing the following details of the DNS query:

• Time of query,
• Source IP address for query,
• Queried domain, and
• Type of query.

The HTTP server typically responds with OK, except in cases where the path is “pixel.gif” when the response contains a 1x1 gif image with a SHA-256 hash of ef1955ae757c8b966c83248350331bd3a30f658ced11f387f8ebf05ab3368629. Like the DNS service, the HTTP service will only log entries when the domain found in the host header of the request follows the expected formatting as seen in Figure 6 and Figure 7. As the HTTPS exfiltration uses non-standardized binary and JSON-formatted payloads when exfiltrating to Catcher, Catcher will check the content type of the request. If the content type is set to “application/json”, Catcher encodes the data in Base64 and includes it in the JSON log entry written to disk. If the content type is set to any other value, Catcher leaves the Base64 payload in the JSON log entry blank and saves the payload to a separate file with the same filename as the JSON log entry with a “.bin” file extension. An HTTPS exfiltration event causes Catcher to save a JSON formatted log file to disk containing the following information from the HTTP request:

• Time,
• Source IP address,
• Request method,
• Host,
• Path,
• Query string,
• Headers, and
• Base64 payload.

These JSON event log files and binary output files are then initially saved to the directory /root/hits/tmp and later moved to the /root/hits/ready directory once processed. This prevents incomplete files, which are still being uploaded to Catcher, from premature exfiltration from the server. Approximately every 60 seconds, a likely automated workflow establishes a Secure Shell (SSH) connection with the server hosting Flowerbed for a few seconds, almost certainly exfiltrating the data processed by Catcher to non-public-facing infrastructure. The command in Figure 8 also executes hourly to remove all files last modified at least two days ago from the /root/hits/ready directory.

Response strategies

Mitigations

In many cases, by the time an organization identifies a compromise related to this campaign, numerous sensitive and proprietary emails have already been exfiltrated. The significant risk posed by this cyber threat emphasizes the importance for organizations that use ZCS and other similar webmail solutions to take proactive steps to mitigate this risk.

All organizations that use the ZCS webmail service should immediately prioritize ensuring that their ZCS is not running a vulnerable version. A patch for CVE-2025-66376 was released for both 10.1.13 and 10.0.18 versions of ZCS [D3-AH]. If immediate patching is not feasible, organizations should advise employees to use alternative mail clients to access email and avoid using the Classic ZCS webmail client until ZCS is updated to a non-vulnerable version [d3f:Isolate].

System administrators should closely monitor any Internet-connected ZCS or other email systems and the workstations that access those systems and promptly apply available software updates [D3-AH]. Administrators can maintain awareness of active vulnerability exploitation by referencing open source resources, including CISA’s Known Exploited Vulnerabilities Catalog and NCSC-UK’s Responding to active exploitation of vulnerabilities guidance.

Organizations should consider using a third-party authentication service that supports passkeys for authentication to mediate access to ZCS and other services that do not natively support passkeys. By doing so, organizations can work to eliminate the possibility of automated password collection from autocomplete or password reuse [D3-CH]. However, Application Passcodes may still be necessary and should be monitored closely.  

Organizations should implement network monitoring capabilities with collection and short-term retention of packet capture or NetFlow data and maintain log collection and storage [CPG 3.Q]. This will allow organizations to monitor for and identify suspicious network activity [CPG 4.B], such as:

• Significant amounts of outbound data being sent to IPs associated with VPS providers not used by the organization [D3-NTA];
• Frequent DNS queries for a suspicious domain with seemingly random subdomains [D3-DNSTA];
• A sudden spike of connections to a server associated with a recently established domain [D3-NTCD]; and  
• Connections to internal services, such as webmail, from VPN providers frequently leveraged by this group for nefarious activity, such as Mullvad VPN [D3-NTCD].

Additionally, for organizations that can inspect the content of outbound HTTPS connections via break-and-inspect infrastructure, security teams should identify traffic matching the characteristics described in the Exfiltration section of this advisory.

Indicators of compromise (IOCs)

Flowerbed infrastructure

The following indicators have been attributed to use by LAUNDRY BEAR for their campaign targeting ZCS’s webmail service as of the publication of this advisory. (Disclaimer: Due to the frequency of operational structure changes by this group, these indicators are intended solely for historic attribution purposes. Some indicators, such as IPs, compromised emails, and domains, may be outdated, so organizations should check for current activity before acting on these IOCs.) Table 7 provides details about the server infrastructure used to host Flowerbed, and Table 8 lists the corresponding SHA-1 hash values for the Let’s Encrypt certificates used by that infrastructure [D3-IAA].

LAUNDRY BEAR has used the following email addresses to procure resources used for this campaign:

• ivanka.zurabishvili@proton[.]me,
• zmul1@buildandconsulting[.]com,
• garrysmithme@pinmx[.]net, and
• hostingclient@pinmx[.]net.

Phishing distribution

LAUNDRY BEAR primarily relied on ProtonMail for distribution of malicious email. However, as stated above, LAUNDRY BEAR’s more recent efforts likely have shifted to distributing the payload through previous victims.  

The following email addresses have distributed payloads attributed to this campaign:

• c.laurent.ejfa@proton[.]me,
• j.moreau.epsc@proton[.]me,
• liberty.insights@proton[.]me,
• certain email addresses (presumably compromised) at the isofts.kiev[.]ua domain (i.e., ending with @isofts.kiev[.]ua), and
• certain email addresses (presumably compromised) at the navs.edu[.]ua domain (i.e., ending with @navs.edu[.]ua).

Additionally, the following are SHA-256 hashes of email samples containing the malicious payload attributed to this campaign:

• 98df604ecc57f884a2e6ce3266a0013ad64455cac48442c2312cfa4765007aaf,
• 60db9abae75cd8ccc49dd7ea5feb41677566dcd442f12ebc5745ffd2810fb874,
• b1f5beb1175fc5c7d1806a2f0d900eb124c54f0286c5c52b66eea7a6633adb1d, and
• 1517b3caa495f6c4e832df9c75fc94667e3c233773f7fa4e056d5e30e5ead760.

Post-compromise artifacts

Currently, the script does not remove artifacts. This leaves additional opportunities to identify victims of this activity. While emphasis should always be placed on consistent monitoring of network traffic and endpoint activity, there are a variety of persistent artifacts described below that can be used to identify victims of this campaign.

This Ulej capability relies on creating a significant number of SOAP requests to collect account information for exfiltration. ZCS logs from these requests are stored, by default, in the /opt/zimbra/log/mailbox.log file [D3-PA]. A significant amount of SOAP request activity that aligns with what was described in the Persistence and credential access and Collection sections of this advisory could indicate a potential compromise. Specific examples of high-risk SOAP request activity might include:

• Many SearchGalRequest command requests from a single user over a short period of time;
• Use of the CreateAppSpecificPasswordRequest command, especially in cases where it is creating an Application Passcode named “ZimbraWeb”; and
• Use of the GetScratchCodesRequest command.

While LAUNDRY BEAR uses the localStorage property to track what days had emails previously exfiltrated, defenders can use this property to identify victims of this campaign and determine the scope of exfiltrated information [D3-PA]. Review of the items stored in that property for an organization’s ZCS webmail client page on an endpoint device could indicate compromise if there are items named with a format of zd_comp_YYYY-MM-DD, as explained in the Collection section of this advisory.

While Application Passcodes have non-malicious purposes, in this case instances of these passcodes with the name “ZimbraWeb” are almost certainly malicious. The ZCS webmail application can support 2FA natively and does not require the use of an Application Passcode, so there is no reason that there should be one named “ZimbraWeb.”

In instances where organizations identify victims of this campaign, they should also examine the inbox of the suspected victim for the original phishing email [D3-MA]. If an email that has a payload exploiting CVE-2025-66376 is discovered, steps should be taken immediately to identify and quarantine other instances of emails with similar body content, senders, and subject lines to prevent further exploitation and exfiltration.  

Remediation

In the event an organization identifies activity associated with this campaign, that organization should take steps to minimize further exploitation. The organization should consider requesting that employees minimize use of the ZCS webmail client until the organization updates to a patched version that is not vulnerable to CVE-2025-66376.

Organizations should use identifiers from the IOCs section of this report to identify any individuals compromised by this campaign and record the date(s) of compromise(s) to determine the scale and scope of emails exfiltrated.

All users from the organization should have all Application Passcodes and 2FA scratch keys revoked. Affected organizations should require all employees to change passwords in line with establishing minimum password strength requirements [CPG 3.B] and creating unique credentials [CPG 3.C], specifically noting that compromised employees might have had any password stored in a password manager exfiltrated.

Works cited

[1] Netherlands General Intelligence and Security Service (AIVD) and Netherlands Defence Intelligence and Security Service (MIVD). AIVD and MIVD identify a new Russian cyber threat actor. 2025. https://www.aivd.nl/site/binaries/site-content/collections/documents/2025/05/27/aivd-en-mivd-onderkennen-nieuwe-russische-cyberactor/Advisory+AIVD+en+MIVD+Public+report+on+new+cyber+actor.pdf

[2] Microsoft Corporation. New Russia-affiliated actor Void Blizzard targets critical sectors for espionage. 2025. https://www.microsoft.com/en-us/security/blog/2025/05/27/new-russia-affiliated-actor-void-blizzard-targets-critical-sectors-for-espionage/

[3] Palo Alto Networks Unit 42. Russian Global Webmail Espionage. 2026. https://unit42.paloaltonetworks.com/russian-webmail-espionage/ 

[4] Proofpoint. TA488 Targets Zimbra Mailservers with Half-Click Exploits. 2026. https://www.proofpoint.com/us/blog/threat-insight/ta488-zcs-exploit

[5] Seqrite. Operation GhostMail: Russian APT exploits Zimbra Webmail to Target Ukraine State Agency. 2026. https://www.seqrite.com/blog/operation-ghostmail-zimbra-xss-russian-apt-ukraine/  

Footnotes

¹ Národní úřad pro kybernetickou a informační bezpečnost
² Forsvarets Efterretningstjeneste
³ Välisluureamet
⁴ Sotilastiedustelu
⁵  Suojelupoliisi
⁶ Direction générale de la sécurité intérieure
⁷ Agence nationale de la sécurité des systèmes d’information
⁸ Agenzia Informazioni e Sicurezza Esterna
⁹ Agenzia Informazioni e Sicurezza Interna
¹⁰ Serviciul de Informații și Securitate al Republicii Moldova
¹¹ Agencja Wywiadu
¹² Służba Kontrwywiadu Wojskowego
¹³ Centro Nacional de Inteligencia
¹⁴ Nationellt Cybersäkerhetscenter
¹⁵ MITRE and ATT&CK are registered trademarks of The MITRE Corporation. MITRE D3FEND is a trademark of The MITRE Corporation.

Acknowledgements

The authoring agencies acknowledge the contributions to this advisory from Palo Alto Networks Unit 42 and Proofpoint.

Disclaimer of endorsement

The information and opinions contained in this document are provided "as is" and without any warranties or guarantees. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement, recommendation, or favoring by the United States Government, and this guidance shall not be used for advertising or product endorsement purposes.

Organizations have no obligation to respond or provide information back to the authoring organizations in response to this joint advisory. If, after reviewing the information provided, an organization decides to provide information to the authoring organizations, reporting must be consistent with all applicable laws and policies.

Purpose

This document was developed in furtherance of the authoring agencies’ cybersecurity missions, including their responsibilities to identify and disseminate threats, and to develop and issue cybersecurity specifications and mitigations. This information may be shared broadly to reach all appropriate stakeholders.

Contact

Appendix A: MITRE ATT&CK tactics and techniques

See Table 9 through Table 19 for all the threat actor tactics and techniques referenced in this advisory.

Appendix B: MITRE D3FEND countermeasures

See Table 20 for a mapping of several of the cybersecurity countermeasures mentioned in this advisory.

The confidential health records of half a million British volunteers have been offered for sale on Chinese website Alibaba, the UK government has confirmed.

The “de-identified” data, belonging to participants in the UK Biobank project, was found for sale on three separate listings last week. Ian Murray, the technology minister, told the Commons on Thursday that, after working with the Chinese government and Alibaba, the records had now been removed. It is not believed any sales were made.

Maximize app performance and ROI with the R8 Configuration Analyzer

A premium experience is only as good as its foundation, and a performant foundation is what allows your app to scale across the Android ecosystem. This is especially true with the release of Android 17, which introduces conservative, device RAM-based app memory limits to target extreme memory leaks and outliers before they cause system-wide instability. To stay below these new system thresholds and prevent your app from being terminated, having a lean footprint is no longer optional: it’s a critical requirement.

This year, we’re making it easier to build highly optimized, fast apps by introducing the R8 Configuration Analyzer in Android Studio. R8 is your most powerful tool for improving app performance, but its effectiveness is often limited by overly broad "keep rules" that prevent the compiler from stripping away unused code. The new Configuration Analyzer provides optimization, obfuscation, and shrinking scores, allowing you to identify specific rules that are preventing the benefits of R8 optimization.

By optimizing their R8 configurations, developers at Monzo achieved a 30% improvement in cold starts and a 35% reduction in ANRs. Smaller, faster code isn't just about efficiency; it's about ensuring your app has the memory headroom to deliver delight on every form factor, from the phone to the car.

Extend your reach with a unified approach to Widgets on Phones, Watches and Cars

User interaction is shifting toward quick, glanceable moments—short bursts of information that keep users connected without needing to open the full app. To help you increase the reach of your app content, we are unifying the development experience across the Android ecosystem with Jetpack Glance. By using a consistent, Compose-based model, you can elevate the content most important to your users straight to the phone’s home screen, Wear Widgets (previously Tiles!), and cars with a familiar workflow.

In order to help users engage with your content and features, even outside your app, we are making widgets more expressive and adaptive with RemoteCompose. On Wear OS, RemoteCompose allows you to use the Compose tools you’re already comfortable with to define UI logic that renders natively on remote surfaces, ensuring that your glanceable experiences remain highly performant and responsive even on resource-constrained hardware. On mobile and cars, RemoteCompose is used as a new framework giving Widgets new expressive capabilities.

You can use Jetpack Glance (together with RemoteCompose on Wear) to deliver a cohesive user journey. Whether it’s viewing flight status on the car dashboard, checking a gate change on a watch, or managing a boarding pass from a phone widget, this shared approach maximizes your app’s presence while keeping your development effort focused and efficient.

For more details, check out the premium Android experience YouTube playlist.

Posted by Alice Yuan, Developer Relations Engineer at Google, Arti Arutiunov, Product Manager at Datadog and Nikita Ogorodnikov, Staff Software Engineer at Datadog

Performance regressions are notoriously hard to reproduce, making regressions a massive bottleneck for mobile developers. Although signals like ANR rates indicate what issues occur in production, pinpointing the specific line of code that resulted in the performance issue has historically necessitated exhaustive manual reproduction or speculative trial-and-error experimentation.

Datadog collaborated with Google to mitigate this frustration by integrating the ProfilingManager API (available on Android 15+ devices) into its Real User Monitoring (RUM) and Continuous Profiling platforms. This integration transforms the debugging workflow, allowing developers to move beyond surface-level symptoms to being able to detect the why behind a performance bottleneck.

The impact of ProfilingManager

ProfilingManager is a system service introduced in Android 15 that enables apps to programmatically collect performance data such as call stack samples, field traces and memory heap dumps directly from production environments. This capability shifts the engineering paradigm from reactive manual reproduction to proactive field analysis.

Solving the Android code-level visibility challenge

Prior to the implementation of ProfilingManager, Datadog’s Real User Monitoring (RUM) focused on high-level application health and session-level telemetry to assess the user journey. Engineering teams could monitor Android performance signals like time to initial display, ANR rates, CPU load, and frozen frames. These insights extended to granular interactions, such as network latency, touch events, and main thread hangs. However, while this data effectively highlighted which performance bottlenecks were surfacing in the field, it provided no clear path to identifying the root cause of these failures.

To address this, Datadog needed a profiling engine capable of capturing Android traces directly from devices in production with minimal performance impact. After evaluating alternative approaches, such as writing their own trace processor using Android Debug APIs, the team selected ProfilingManager because it is the most performant solution of the profiling options they evaluated and offloads the sampling decisions overhead to the OS.

ProfilingManager supports a wide range of collection methods, including CPU traces, call stack sampling, memory analysis through Java heap dumps and native heap profiles. It enables developers to profile production builds, upload trace files to external storage, and review them in the Perfetto trace analyzer UI. As a SaaS provider, Datadog uploads, visualizes, and analyzes these profiles collected via its SDK, providing a unified view of application health.

• Granular session diagnostics: ProfilingManager enhances debuggability by delivering direct OS-level trace data, overcoming the visibility and alignment challenges typical of custom logging with system services. To dive deeper, developers can download these traces from Datadog to investigate further in visualization tools like the Perfetto UI.
• Automated telemetry triggers: By leveraging native system events to initiate trace recordings at key optimization points, Datadog reduces the need to build custom collection logic. While the initial rollout focuses on the APP_FULLY_DRAWN signal, there are already plans to expand this observability to include ANR, OOM, and COLD_START triggers.
• Proactive trace snapshots: By interfacing directly with the system-level Perfetto service (traced), ProfilingManager utilizes a proactive background recording model designed to capture unpredictable issues. This ensures that developers receive a precise visualization of the events leading up to a performance anomaly, offering a level of insight that exceeds what is possible through manual instrumentation.
• Bottleneck detection at scale: Datadog is able to synthesize telemetry from across Datadog’s global customer base to uncover regressions that only emerge under unique hardware configurations and variable network environments.
• System-enforced resource stability: The API leverages sampling trace collection to ensure performance and user experience impacts remain unnoticeable.
• On-device data controls: ProfilingManager filters out irrelevant information from other processes on-device before the profile is delivered to the app. This minimizes file sizes and ensures that only data relevant to the app's processes is provided.

Processing millions of weekly profiles to optimize real-world apps

Conclusion

By integrating Android’s ProfilingManager API, Datadog successfully closed the visibility gap between backend systems and mobile client applications for their customers. By processing millions of profiles weekly with negligible device overhead, Datadog equips Android developers with the code-level insights necessary to diagnose complex performance bugs instantly, helping developers build smoother applications and improve their app’s performance signals in the Play Store. To adopt the ProfilingManager API directly into your performance observability framework, check out our documentation.

In the future, Datadog aims to make Android profiling data a first-class input for coding agents to autonomously resolve performance bottlenecks, closing the feedback loop between detection and remediation. Datadog is working toward making Android profiling broadly accessible to developers.

To get started using the Datadog real user monitoring feature powered by ProfilingManager, visit Datadog Mobile Real User Monitoring.

Posted by Paul Feng, Vice President, Google Play Eng, Product, UX

More billing flexibility

Lower, separate fees

 

• New installs: A transaction from a user whose first-time install or first update of the app from Google Play occurred on or after the date that the new fee structure launched in their region.
• Existing installs: A transaction from a user whose first-time install or first update of the app from Google Play occurred before the date that the new fee structure launches in their market.

For transactions that use Google Play’s billing system, an additional billing fee applies. In the United States, United Kingdom, and the European Economic Area, the billing fee is set at 5%. We'll announce billing fee details for other markets soon. For transactions processed via alternative billing or external web links, the billing fee does not apply.

Review this Help Center article to understand how these rates apply to your business.

Games Level Up and Apps Experience program guidelines

We are also excited to announce even more opportunities for partners who deliver exceptional user experiences across the Android ecosystem: the revamped Games Level Up and the new Apps Experience program. Detailed guidelines are now available on the respective program websites.

Apps and games that meet all requirements are eligible for a new program rate card with reduced rates. See the table below for details:

Visit the Games Level Up and Apps Experience program websites, review the guidelines, and start preparing your games and apps ahead of September 30, 2026, when the program rate cards officially become available.

Global release schedule

Evolving our business model requires technical infrastructure and alignment with local regulations, so these updates will roll out on a staggered timeline. To help you plan, here is the previously announced release schedule for each update across all markets:

Here is a quick recap of the resources available to help you get started:

• Review the billing choice program;
• Learn more about Google Play's lower service fees;
• Explore detailed guidelines on the Games Level Up and Apps Experience program websites.

We look forward to building the next generation of Google Play experiences together.

Introduction

Note: This advisory was originally published on April 7, 2026, to provide tactics, techniques, and procedures (TTPs) and indicators of compromise (IOCs) related to ongoing cyber exploitation of internet-connected operational technology (OT) devices by Iranian-affiliated advanced persistent threat (APT) actors. The authoring agencies updated this advisory on July 22, 2026, to add new guidance on detecting malicious changes in reusable code modules leveraged within Rockwell Automation PLC programs. It also expands the manufacturer scope to include observed targeting of Schneider Electric, Siemens, and potentially other branded/manufactured PLCs, emphasizing the importance of restricting direct internet access and providing best practice resources for secure deployment.

The Federal Bureau of Investigation (FBI), Cybersecurity and Infrastructure Security Agency (CISA), National Security Agency (NSA), Environmental Protection Agency (EPA), Department of Energy (DOE), United States Cyber Command – Cyber National Mission Force (CNMF), and Department of the Treasury (Treasury) (hereafter referred to as the “authoring agencies”) are urgently warning U.S. organizations of ongoing cyber exploitation of internet-connected OT devices—including PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, Siemens, and potentially other manufactured PLCs—across multiple U.S. critical infrastructure sectors. As a result of this activity, organizations from multiple U.S. critical infrastructure sectors experienced disruptions through malicious interactions with PLC project files¹ and the manipulation of data displayed on human machine interface (HMI) and supervisory control and data acquisition (SCADA) displays. In a few cases, this activity caused operational disruption and financial loss.

The authoring agencies assess a group of Iranian-affiliated APT actors is conducting this activity to cause disruptive effects within the United States. The group targeted devices spanning multiple U.S. critical infrastructure sectors, including Government Services and Facilities (to include local municipalities), Water and Wastewater Systems (WWS), and Energy Sectors. The authoring agencies previously reported on similar activity targeting PLCs by CyberAv3ngers (aka Shahid Kaveh Group)—a cyber threat actor affiliated with Iran’s Islamic Revolutionary Guard Corps (IRGC) Cyber Electronic Command (CEC).

Due to the widespread use of these PLCs, and the potential for additional targeting of other branded OT devices across critical infrastructure, the authoring agencies recommend U.S. organizations urgently review the TTPs and IOCs in this advisory for indications of current or historical activity on their networks, and apply the recommendations listed in the Mitigations section of this advisory to reduce the risk of compromise.

If owners and operators discover an affected internet-accessible device in their environment, additional technical measures may be necessary to evaluate the risk of compromise. Please engage your cyber incident response plans and contact the authoring agencies and applicable vendors through existing support channels available to customers and integrators (see Contact Information) to receive support, mitigation, and investigation assistance.

For more information on Iranian malicious cyber activity, see CISA’s Iran Threat Overview and Advisories webpage and the FBI’s Iran Threat and Iran Cyber Threat Overview webpages.

Download the PDF version of this report:

(New, July 22, 2026) For a downloadable copy of July 22, 2026 IOCs, see:

• AA26-097A STIX XML (XML, 29 KB)
• AA26-097A STIX JSON (JSON, 30 KB)

For a downloadable copy of historical April 7, 2026 IOCs, see:

Background Information

Similar Historical Activity Targeting Programmable Logic Controllers

During a similar campaign beginning in November 2023, the IRGC CEC-affiliated cyber threat actors known as "CyberAv3ngers” targeted U.S.-based PLCs and HMIs, causing disruptive effects. Private industry and open sources also refer to this group as Hydro Kitten, Storm-0784, APT Iran, Bauxite, Mr. Soul, Soldiers of Solomon, UNC5691, and the Shahid Kaveh Group. These attacks compromised at least 75 devices, targeting U.S.-based Unitronics PLC devices with an HMI used across multiple critical infrastructure sectors, including the WWS. APT actors developed and deployed custom ladder logic code to these devices, replacing the valid ladder logic with malicious code that continues to be observed to date.

For more information on this group’s activity, see the joint Cybersecurity Advisory IRGC-Affiliated Cyber Actors Exploit PLCs in Multiple Sectors, Including US Water and Wastewater Systems Facilities.

Ongoing Threat Actor Activity Against U.S.-Based Programmable Logic Controllers

The FBI observed Iranian-affiliated APT actors targeting internet-exposed PLCs with the intent to cause disruptions—including maliciously interacting with project files, and manipulating data displayed on HMI and SCADA displays—to U.S. critical infrastructure organizations. Iranian-affiliated APT targeting campaigns against U.S. critical infrastructure have recently escalated, likely in response to hostilities between Iran, and the United States and Israel.

(New, July 22, 2026) At one U.S. victim, the FBI observed the APT actors download a malicious project file to a targeted PLC using configuration software. Analysis indicated the project file retained ladder logic for downstream function but added logic that overrode specific instruction sets responsible for maintaining safe operating parameters in the victim’s environment.

Since at least March 2026, the authoring agencies identified (through engagements with victim organizations) an Iranian-affiliated APT group disrupted the function of PLCs. Organizations across several U.S. critical infrastructure sectors (including Government Services and Facilities, WWS, and Energy Sectors) deployed these PLCs within a wide variety of industrial automation processes. Some of the victims experienced operational disruption and financial loss.

Technical Details

Note: This advisory uses the MITRE ATT&CK^® Matrix for Enterprise framework, version 19. See the MITRE ATT&CK Tactics and Techniques section of this advisory for tables of the threat actors’ activity mapped to MITRE ATT&CK tactics and techniques.

Initial Access

(Updated, July 22, 2026) The authoring agencies observed Iranian-affiliated APT actors using several foreign-based IP addresses to access internet-facing PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, Siemens, and potentially other manufactured PLCs [T0883]. The actors used leased, third-party hosted infrastructure and manufacturers’ PLC programming software to connect to misconfigured victim PLCs. Inbound malicious traffic has been observed targeting PLC devices on the following ports: 44818, 2222, 102, and 502, as well as targeting modems on port 22. Targeted devices include:

• Rockwell Automation: CompactLogix and Micro850 PLCs
• Schneider Electric: BMX P34/Modicon M340 PLCs
• Siemens: S7-1200 series PLCs

Command and Control

(Updated, July 22, 2026) The targeting of ports [T0885] associated with other OT vendors’ protocols suggests these actors are opportunistically targeting devices manufactured by companies other than Rockwell Automation/Allen-Bradley, including Schneider Electric and Siemens. In one reported instance, the actors utilized Dropbear Secure Shell (SSH) software on victim modems to enable them to gain remote access through port 22 [T1219].

Exfiltration

(New, July 22, 2026) The authoring agencies observed Iranian-affiliated APT actors using configuration software—such as Rockwell Automation’s Studio 5000 Logix Designer, Schneider Electric’s EcoStruxure Control Expert, and Siemens’ Totally Integrated Automation (TIA) Portal—on leased, third-party hosted infrastructure to exfiltrate device project files from PLC devices to threat-actor-controlled infrastructure [T1041].

Impact

(Updated, July 22, 2026) After the actors extracted device project files, the FBI and CISA identified the modification and deletion of project file logic, to include Add-On Instructions (AOIs) and data manipulation on HMI and SCADA displays [T1565]. Additionally, the changes disabled critical shutdown and alarm logic, allowing systems to enter unsafe conditions without notifying operators of the anomalies.

Note: An AOI is analogous to a “Function Block” or “User Defined Function Block” used in other PLC vendor programs.

Indicators of Compromise

See Table 1 and Table 2 for recent IP addresses used by the Iranian-affiliated APT actors to communicate with PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, and Siemens in the United States.

Disclaimer: The FBI observed the threat actors using the IP addresses listed below in the specified time frames. This data is being provided for customers to query against logs for indications of historical targeting by the Iranian-affiliated APT actors. The authoring agencies recommend organizations investigate or vet these IP addresses prior to taking action, such as blocking.

MITRE ATT&CK Tactics and Techniques

See Table 3 to Table 6 for all referenced threat actor tactics and techniques in this advisory. The authoring agencies recommend organizations review historical TTPs for similar Iranian-affiliated cyber actor activity in IRGC-Affiliated Cyber Actors Exploit PLCs in Multiple Sectors, Including US Water and Wastewater Systems Facilities. For assistance with mapping malicious cyber activity to the MITRE ATT&CK framework, see CISA and MITRE ATT&CK’s Best Practices for MITRE ATT&CK Mapping and CISA’s Decider Tool.

Mitigations

The authoring agencies recommend organizations implement the mitigations below to improve your organization’s cybersecurity posture on the basis of the threat actors’ activity. These mitigations align with the Cross-Sector Cybersecurity Performance Goals (CPGs) developed by CISA and the National Institute of Standards and Technology (NIST). The CPGs provide a minimum set of practices and protections that CISA and NIST recommend all organizations implement. CISA and NIST based the CPGs on existing cybersecurity frameworks and guidance to protect against the most common and impactful threats and TTPs. Visit CISA’s CPGs webpage for more information on the CPGs, including additional recommended baseline protections.

Network Defenders

The cyber threat actors accessed PLCs manufactured by Rockwell Automation/Allen-Bradley, Schneider Electric, Siemens, and potentially other branded/manufactured PLCs to cause disruptions to victim systems. To safeguard against this threat and threats to other types of PLCs, the authoring agencies urge organizations to consider the following mitigations.

(Updated, July 22, 2026) In addition to contacting the authoring agencies, organizations and integrators operating PLCs from the manufacturers mentioned in this advisory should review the previously issued guidance to strengthen the security of their OT deployments:

• Rockwell Automation: Contact the Rockwell Automation Product Security Incident Response Team (PSIRT) at PSIRT@rockwellautomation.com for questions regarding this guidance, or to report cyber incidents related to Rockwell Automation products.
  
  • Refer to Rockwell Automation Security Advisory SD1771 for recommended PLC hardening measures and configuration guidance.
• Schneider Electric: Contact the Schneider Electric Corporate Product Cyber Emergency Response Team (CPCERT) at cpcert@se.com for questions regarding this guidance, or to report cyber incidents related to Schneider Electric products.
  
  • Refer to Schneider Electric’s Recommended Cybersecurity Best Practices and Cybersecurity User Guide for Modicon Controller Platform for guidance on securing and configuring PLCs.
• Siemens: Contact Siemens ProductCERT at productcert@siemens.com for questions regarding this guidance, or to report cyber incidents and vulnerabilities related to Siemens products.
  
  • Refer to Siemens Security Bulletin 104599 for a list of security measures to harden PLCs and in-depth configuration guides.
  • Siemens users should review the Cybersecurity for Industry Operational Guidelines and implement defense-in-depth controls within their automation systems.

Immediate steps to prevent the attack:

• Disconnect the PLC from the public-facing internet [CPG 3.S]. Follow the joint guidance Secure connectivity principles for OT to safely allow remote access. Specifically, “remove inbound port exposure,” so the OT system is never directly exposed to the internet or external networks, and to ensure all access is mediated, monitored, and controlled. Do this through a secure gateway (jump host) that brokers the connection.
  
  • Ensure cellular modems, used for remote field connectivity and access, are secured with strong authentication and updated.
  • Enable logs for connected modems and regularly review for suspicious activity to detect intrusions and improve incident response speed.
  • (New, July 22, 2026) To mitigate unauthorized access to OT via cellular modems, organizations should consider implementing isolated architectures, such as private Access Point Name (APN), 5G Public Network Integrated Non-Public Network (PNI-NPN), cellular Software-Defined Wide Area Network (SD-WAN), Zero Trust Network Access (ZTNA), or a site-to-site virtual private network (VPN).
• (New, July 22, 2026) Strictly control network access to PLC devices.
  
  • Configure firewall rules or access control list (ACL) security features on PLCs or programmable controllers to allow only authorized communications between expected control system devices. Block access from unauthorized or threat actor-controlled IP addresses, such as those associated with hosting providers.
• For controllers with a physical mode switch, place the physical mode switch into run position to prevent remote modification. Devices should only be in the program or remote position when updating or downloading software online and immediately switched back to the run position when complete. (See Rockwell Automation’s² System Security Design Guidelines for manufacturer’s instructions.)
  
  • (New, July 22, 2026) Prior to switching the device to run mode, review and validate project files, as changing modes will lock in the current project file downloaded to the device.
• For devices that allow software key switching, enable programming protection in PLC configuration software (S7 TIA Portal) to limit who can modify PLCs remotely. (See Siemens’ Cybersecurity for Industry Operational Guidelines for the manufacturer’s instructions.)

Follow-up steps to strengthen security posture:

• (New, July 22, 2026) Review project files running on PLCs for unauthorized changes. Use vendor-provided integrity checking tools and visually compare the running program to known good logic. Ensure reusable logic and input/output configurations are valid. For Rockwell Automation PLCs listed in the Customer Guidance to Disconnect Devices from the Internet, check the AOIs for any anomalous modifications.
  
  • If restoring from backups, verify the backup does not contain malicious logic before deployment.
  • Review logs and configurations on all connected devices, including modems, HMIs, and workstations, to assess potential lateral movement by threat actors. If it appears the actors connected to additional devices, reimage these devices to remove any potential malicious changes or access tools.
• (New, July 22, 2026) Ensure device passwords are changed from their default and are configured to use complex, unique combinations of letters, numbers, and symbols that are not easily guessable. Implementing robust password practices remains a critical security measure that can help prevent unauthorized access and strengthen the overall security posture of OT devices.
• (New, July 22, 2026) Take defensive measures to minimize the risk of exploitation. Conduct comprehensive impact analysis and risk assessments prior to deploying defensive measures.
• Create and test strong backups of the logic and configurations of PLCs. Store backup files offline and secure the physical removal media to enable fast recovery.
• Implement multifactor authentication (MFA) [CPG 3.F] for access to the OT network from an external network.
• If remote access is required, implement a network proxy, gateway, firewall, and/or VPN in front of the PLC to control network access.
  
  • A VPN or gateway device can enable MFA for remote access even if the PLC does not support MFA. Implement security rules on these higher-level network security mechanisms to prevent the type of repeated and sustained login attempts seen during a brute force attack. When possible, implement a device control list for workstations sending messages or connecting to OT components.
  • Use the device control list to monitor for logon activity for unexpected or unusual access to devices from the internet.
• Keep PLC devices updated with the latest software patches issued by the manufacturer. Use established downtime windows to install patches. Known Exploited Vulnerabilities may need to be prioritized outside a downtime window.
• Configure external and internal firewalls to block traffic using common ports associated with network protocols that are unnecessary for the particular network segment.
• Disable any unused authentication methods, logic, or features, such as default authentication keys and passwords, as well as unused or needed services such as Teletype Network (Telnet), File Transfer Protocol (FTP), Remote Desktop Protocol (RDP), Virtual Network Computing (VNC), and web services.
• Monitor asset management systems for device configuration changes, which can be used to understand expected parameter settings.
• Monitor the content of network traffic for the following:
  
  • Unusual logins to internet-connected devices or unexpected protocols to/from the internet. 
  • Functions of industrial control systems management protocols that change an asset’s operating mode or modify programs.
• (New, July 22, 2026) Ensure service providers are informed of active threats targeting internet-connected PLC devices. Owners and operators should communicate directly with service providers to address risks, especially when remote monitoring or maintenance is involved. Some service providers may rely on internet connectivity essential to monitor and maintain OT/ICS operations but may not be fully aware of active threats.

In addition, the authoring agencies recommend network defenders apply the following mitigations to limit potential adversarial use of common system and network discovery techniques, as well as reduce the impact and risk of compromise by cyber threat actors:

• Reduce risk exposure. CISA offers a range of services at no cost, including scanning and testing, to help organizations reduce exposure to threats via mitigating attack vectors. CISA’s Cyber Hygiene Services can help provide additional review of organizations’ internet-accessible assets. 

Device Manufacturers

Note: The following guidance is general in nature and not specific to any OT vendor. Some of the features, settings, and practices may already be offered by certain vendors. The inclusion of this guidance should not be interpreted as an assertion that vendors referenced do not offer such security features. Also, this advisory is not highlighting a new vulnerability in the identified products, but instead discusses opportunistic targeting. Device manufacturers can make opportunistic attacks more difficult at scale by encouraging more secure behavior by default and in operations, as discussed below. 

Although critical infrastructure organizations using PLC devices can take steps to mitigate the risks, it is ultimately the responsibility of the device manufacturer to build products secured by design and default. The authoring agencies urge device manufacturers to take ownership of their customers’ security outcomes by following the principles in the joint guide Secure by Demand: Priority Considerations for OT Owners and Operators when Selecting Digital Products, primarily:

• Change the manufacturers’ default settings to prevent exposing administrative interfaces to the internet.
• Do not charge additional fees for basic security features needed to operate the product securely.
• Support MFA, including via phishing-resistant methods.

By using secure by design tactics, software manufacturers can make product lines secure “out of the box” without requiring customers to spend additional resources making configuration changes, purchasing tiered security software and logs, monitoring, and making routine updates.

For more information on common misconfigurations and guidance on reducing their prevalence, see joint advisory NSA and CISA Red and Blue Teams Share Top Ten Cybersecurity Misconfigurations. For more information on secure by design, see CISA’s Secure by Design webpage and joint guide.

Validate Security Controls

In addition to applying mitigations, the authoring agencies recommend exercising, testing, and validating your organization's security program against the threat behaviors mapped to the MITRE ATT&CK for Enterprise framework in this advisory. The authoring agencies recommend testing your existing security controls inventory to assess how they perform against the ATT&CK techniques described in this advisory.

To get started:

1. Select an ATT&CK technique described in this advisory (see Table 3 to Table 6).
2. Align your security technologies against the technique.
3. Test your technologies against the technique.
4. Analyze your detection and prevention technologies’ performance.
5. Repeat the process for all security technologies to obtain a set of comprehensive performance data.
6. Tune your security program, including people, processes, and technologies, based on the data generated by this process.

The authoring agencies recommend continually testing your security program, at scale, in a production environment to ensure optimal performance against the ATT&CK techniques identified in this advisory.

Resources

• Authoring Agencies: IRGC-Affiliated Cyber Actors Exploit PLCs in Multiple Sectors, Including US Water and Wastewater Systems Facilities
• CISA: Bulletproof Defense: Mitigating Risks From Bulletproof Hosting Providers
• EPA: Cybersecurity for the Water Sector
• CISA: Water and Wastewater Cybersecurity
• CISA: Exploitation of Unitronics PLCs used in Water and Wastewater Systems
• CISA: Iran Threat Overview and Advisories
• FBI: The Iran Threat and Cyber Threat Overview: Iran
• CISA, MITRE: Best Practices for MITRE ATT&CK Mapping
• CISA: Decider Tool
• CISA: Cross-Sector Cybersecurity Performance Goals 2.0
• CISA: No-Cost Cybersecurity Services and Tools
• CISA: Secure by Demand: Priority Considerations for OT Owners and Operators when Selecting Digital Products
• NSA, CISA: NSA and CISA Red and Blue Teams Share Top Ten Cybersecurity Misconfigurations
• CISA: Secure by Design
• FBI, CISA: Primary Mitigations to Reduce Cyber Threats to Operational Technology
• United Kingdom National Cyber Security Centre: Secure connectivity principles for operational technology

Contact Information

U.S. organizations are encouraged to report suspicious or criminal activity related to information in this advisory to CISA, the FBI, and/or NSA:

• Contact CISA via CISA’s 24/7 Operations Center at contact@cisa.dhs.gov or 1-844-Say-CISA (1-844-729-2472). File a claim with FBI’s Internet Crime Complaint Center (IC3) or contact your local FBI field office. When available, please include the following information regarding the incident: 
  • Date, time, and location of the incident;
  • Type of activity;
  • Number of people affected;
  • Type of equipment used for the activity; and
  • Name of the submitting company or organization, and a designated point of contact.
• For NSA cybersecurity guidance inquiries, contact CybersecurityReports@nsa.gov.
• Entities required to report incidents to DOE should follow established reporting requirements, as appropriate. For other energy sector inquiries, contact EnergySRMA@hq.doe.gov.
• Contact the Rockwell Automation PSIRT for questions regarding their guidance or for reporting cyber incidents related to Rockwell Automation products at PSIRT@rockwellautomation.com.
• Contact the Schneider Electric CPCERT at cpcert@se.com for questions regarding this guidance, or to report cyber incidents related to Schneider Electric products.
• Contact Siemens ProductCERT for up-to-date information about the security of Siemens products or to report cybersecurity vulnerabilities at productcert@siemens.com. For support with increasing the security of installed Siemens PLCs, contact Siemens Industrial Cybersecurity Services at services.automation@siemens.com. See Siemens ProductCERT and Siemens CERT for more information.

Disclaimer

The information in this report is being provided “as is” for informational purposes only. CISA and the authoring agencies do not endorse any commercial entity, product, company, or service, including any entities, products, or services linked within this document. Any reference to specific commercial entities, products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply endorsement, recommendation, or favoring by CISA and the authoring agencies.

Version History

April 7, 2026: Initial version.

July 22, 2026: Update includes new guidance on detecting malicious activity, expanded scope of observed targeting, and best practices for secure PLCs deployment.

Notes

¹Project file refers to the software file that contains ladder logic and configuration settings. On Rockwell Automation devices, it is referred to as an .ACD file.

² See CompactLogix 5370 Controllers (Chapter 5: “Select the Operating Mode of the Controller”) for more information on functions available for the switch.

If you have a previous version of Rust installed via rustup, you can get 1.96.0 with:

$ rustup update stable

If you don't have it already, you can get rustup from the appropriate page on our website, and check out the detailed release notes for 1.96.0.

If you'd like to help us out by testing future releases, you might consider updating locally to use the beta channel (rustup default beta) or the nightly channel (rustup default nightly). Please report any bugs you might come across!

What's in 1.96.0 stable

New Range* types

Many users expect Range and related core::ops types to be Copy, but this is not the case: they implement Iterator directly, and it is a footgun to implement both Iterator and Copy on the same type so this has been avoided. RFC3550 proposed a set of replacement range types that implement IntoIterator rather than Iterator, meaning they can also be Copy. The standard library portion of that RFC is now stable, introducing:

• core::range::Range
• core::range::RangeFrom
• core::range::RangeInclusive
• Associated iterators

A Rust version in the near future will also add core::range::RangeFull and core::range::RangeTo as re-exports from core::ops (these do not implement Iterator and already implement Copy), and core::range::legacy::* as the new home for the current ranges. Range syntax like 0..1 still produces the legacy types for now, but will be updated to core::range types in a future edition.

With these stabilizations, it is now possible to store slice accessors in Copy types without splitting start and end:

use core::range::Range;

#[derive(Clone, Copy)]
pub struct Span(Range<usize>);

impl Span {
    pub fn of(self, s: &str) -> &str {
        &s[self.0]
    }
}

The new RangeInclusive also makes its fields public, unlike the legacy version which avoided exposing the exhausted iterator state. This isn't a concern with the new type since it must be converted to begin iteration.

Library authors should consider making use of impl RangeBounds in public API, which accepts both legacy and new range types. If a concrete type is needed, prefer using new ranges as this will eventually become the default.

Assert matching patterns

The new macros assert_matches! and debug_assert_matches! check that a value matches a given pattern, panicking with a Debug representation of the value otherwise. These are essentially the same as assert!(matches!(..)) and debug_assert!(matches!(..)), but the printed value improves the possibility of diagnosing the failure.

These new macros have not been added to the standard prelude, because they would collide with popular third-party crates that provide macros with the same name. Instead, they should be manually imported from core or std before use.

use core::assert_matches;

/// [Random Number](https://xkcd.com/221/)
fn get_random_number() -> u32 {
    // chosen by a fair dice roll.
    // guaranteed to be random.
    4
}

fn main() {
    assert_matches!(get_random_number(), 1..=6);
}

Changes to WebAssembly targets

WebAssembly targets no longer pass --allow-undefined to the linker which means that undefined symbols when linking are now a linker error instead of being converted to WebAssembly imports from the "env" module. This change prevents modules from linking unless all linking-related symbols are defined to catch bugs earlier and prevent accidental issues with symbol naming or similar.

Undefined linking-related symbols are often indicative of build-time related bugs or misconfiguration. If, however, the old behavior is intended then it can be re-enabled with RUSTFLAGS=-Clink-arg=--allow-undefined or by editing the source code and using #[link(wasm_import_module = "env")] on the block defining the symbol.

This change was previously announced on this blog, and now takes effect in Rust 1.96.

Stabilized APIs

• assert_matches!
• debug_assert_matches!
• From<T> for AssertUnwindSafe<T>
• From<T> for LazyCell<T, F>
• From<T> for LazyLock<T, F>
• core::range::RangeToInclusive
• core::range::RangeFrom
• core::range::RangeFromIter
• core::range::Range
• core::range::RangeIter

Two Cargo advisories

Rust 1.96 contains fixes for two vulnerabilities for users of third-party registries.

• CVE-2026-5223 is a medium severity vulnerability regarding extraction of crate tarballs with symlinks.

• CVE-2026-5222 is a low severity vulnerability regarding authentication with normalized URLs.

Users of crates.io are not affected by either vulnerability.

Other changes

Check out everything that changed in Rust, Cargo, and Clippy.

Contributors to 1.96.0

Many people came together to create Rust 1.96.0. We couldn't have done it without all of you. Thanks!

Bots (and privacy-preserving browsers) not welcome

Browse a news site in a private window. Shop at a major retailer with a VPN. Visit a video streaming platform with anti-fingerprinting defenses tuned up. You’ll see the same responses: registration walls, block pages, and endless CAPTCHAs. The message is clear: if we think you might be a bot, you’re not welcome.

Websites have valid reasons for wanting to block bots. Bots enable volumetric abuse, abuse that wouldn’t otherwise be feasible if they had to be carried out by humans.  For example: SEO comment spam, credential stuffing and DDoSing. Consequently many sites employ dedicated anti-abuse tooling which aims to keep the bots out whilst minimizing friction for human visitors.

Unfortunately, that tooling is increasingly failing at both tasks. Browser privacy protections are dismantling the passive signals that anti-abuse systems depended on to identify and distinguish visitors. Meanwhile advances in generative AI have rendered CAPTCHAs ineffective: bots now solve them faster and more reliably than humans.

Many sites are switching to more invasive mechanisms and now ask visitors to disclose identifying information, e.g. an email address, a federated login or disabling their VPN. This means greater friction for users, since providing these details on a first visit takes time. It also compromises their privacy, since these details enable the same kinds of cross-site tracking that browser privacy protections were intended to mitigate.

This leaves users with a dilemma. The more effectively they protect their privacy, the harder it is for websites to distinguish them from bots and the worse the treatment they receive. Website operators are also suffering. The additional friction they inflict upon well-behaved visitors harms their site, but many are willing to pay the costs if it mitigates volumetric abuse.

Browser-based AI agents make this tension more acute. Sites may want to allow agents which are acting on behalf of individual users while blocking agents engaged in volumetric abuse. However, with no effective mechanisms to distinguish the two, websites are opting to block both. That hurts users, who should be free to choose the user agent they use to access the web; it hurts new browsers and agents, which struggle to interoperate; and it hurts sites, which lose legitimate visitors.

The consequence is that the web gets worse for everyone. Users get more friction or less privacy or both. Website operators see more volumetric abuse and the friction they add drives away users who would otherwise want to consume their content or services. New user agents struggle to access the same content as conventional browsers.

The Costs of Convenient Solutions

Some large ecosystem players have put forward solutions that leverage their control of the dominant operating systems and their deep integration with consumer hardware. These rely on device attestation: identifiers and privileged code baked into devices at the hardware level, which let manufacturers prove what software is running on a user’s device. Exposing this functionality to the web means attesting to sites that the user is running approved software with trusted hardware and therefore isn’t a bot. There have been two substantive proposals.

Google’s Web Environment Integrity, abandoned in 2023, was the blunt version. It attested to the user agent itself, as well as the operating system and device in use. Users would have lost control in two ways: once to the attester, which would decide which operating systems and devices could be blessed, and again to the website, which would decide which software to accept. If sites had adopted allow-lists of approved user agents, building a new browser would have become virtually impossible, and sites could have withdrawn access from any user agent they chose.

Apple’s Private Access Tokens, deployed across their ecosystem in 2022, have more subtle issues. Built on the Privacy Pass protocol standardized at the IETF, they get a lot right: a user receives a renewed, limited batch of one-time tokens that can be presented to websites without linking their visits together. This provides privacy for users and has shown rate limits to be an effective tool for sites – both points we’ll return to later in this post.

However, Private Access Tokens rely on device attestation, requiring that the hardware manufacturer be in overall control of the user’s device. Presenting a PAT tells a website you are locked into Apple’s rules for what counts as acceptable software. Due to PAT’s technical design^[1], there’s no way to open the system to other sources of scarcity without compromising the system’s privacy properties, meaning that if more widely deployed, access to the web would become tied to having bought expensive hardware from a small, hard to change set of vendors.

Both approaches are ultimately hostile to users and to the openness of the web. Both are premised on parts of a user’s device that sit within the manufacturer’s control and beyond the user’s own. Were they widely deployed, the web would become just another walled garden with centralized gatekeepers controlling acceptable hardware, operating systems and software. As convenient as these solutions are for the players who already dominate the ecosystem, we think there’s a better path.

A Better Path Forward

Bots’ harms arise from their ability to operate beyond human scale. For sites to prevent volumetric abuse they don’t actually need to know the user’s identity or receive cryptographic proof that they’re running approved software. If sites knew their visitors were restricted to a rate limit set by a site, that would be enough.  

Rate limits only make sense if they’re tied to something scarce; something an attacker can’t cheaply replicate to evade the limit. Without anchoring to a scarce resource, like the trusted hardware used in Private Access Tokens, attackers can generate as many fresh identities as they need to bypass the rate limit.

However, hardware is just one option for scarcity. Anything a user already has that an attacker can’t trivially spin up at scale will work: email addresses and phone numbers are naturally scarce. A paid subscription costs an attacker the same as a real user.  Even maintaining an account on a free service requires some non-trivial work.

What if we could use these scarce signals across the web? We could build an open ecosystem with many parties offering scarcity signals, each site choosing which to accept. By opening up who can provide a signal, and letting sites choose which to accept, we can avoid transferring control to device manufacturers and the resulting harms.

As a concrete example of who might be well positioned to provide such a signal, we can consider VPN providers acting as a subscription service. Sites routinely block VPN users indiscriminately, whether through a deliberate policy choice or through an indirect consequence of rate limiting visitors per IP address. But a VPN subscription is a perfect source of scarcity. If the VPN provider could vouch for its users so that sites could rate limit each user individually – then users would be able to browse the web with less friction and without giving up their VPN usage.

The catch is that building a system that can enable this on the open web whilst maintaining user’s privacy is genuinely difficult. It requires that we take information from one site — that this user holds some scarce thing — and expose it to other sites so that they can use that as the basis for their rate limiting. Letting one site verify a signal from another is the sort of information flow that privacy-preserving browsers have spent the last decade locking down to prevent cross-site tracking.

Our goal would be that no more than the minimum information gets through: a single bit communicating whether the user is below the rate limit set by the site. Leaking anything more – like the source of the scarcity that the rate limit is anchored to – would be unacceptable. Enabling a new cross-site information flow might feel like compromising privacy to gain better access, but reality is more nuanced. If a new system moves sites away from demanding that visitors be identifiable (whether through fingerprinting or login forms), it can be a win for both privacy and access.

The Foundations

The good news is that the cryptographic foundations for a privacy preserving approach already exist. The Privacy Pass protocol, originally developed in 2018 to reduce the friction of Cloudflare CAPTCHAs for Tor users, introduced the core primitive: a token that is unlinkable between issuance and redemption. You prove something to an issuer (e.g. by solving a CAPTCHA), receive some tokens, and later present a token to a website. The website can verify the token is legitimate, but can’t link it to the user it was issued to.

Figure 1: In Privacy Pass, a CAPTCHA provider can issue tokens to a client which can then be used to bypass challenges for future site visits. Even if the CAPTCHA provider and sites collude, they can’t use the tokens to identify the user or their browsing history.

Privacy Pass has gone on to be successfully deployed in systems where the issuer and verifier have a prior trust relationship: Apple uses it to authenticate users of Private Cloud Compute and Private Relay without linking their activity to their identity, Chrome uses it for two-hop IP protection, and Kagi uses it to provide private search. These deployments work in part because a small number of parties have agreed in advance on who issues tokens and who accepts them.

Applying this approach to an open system where any site can act as an issuer brings real challenges. Firstly, even though tokens are unlinkable, knowing a user has access to a specific issuer is a privacy leak on its own, because you can infer that the user meets the relevant issuance criteria. If one site can learn that you have a token from another site, that reveals that you have been to that site, which can be a major privacy problem. This compounds if sites can learn the set of issuers you have visited, since it becomes a fingerprint which can be used to identify you.

Generic techniques exist for proving a statement in zero knowledge: we can prove that a client has a token from a set of acceptable issuers without revealing which specific issuer it is. We’ll call this issuer blinding. The generic approach is often slow, but bespoke approaches tailored to the underlying cryptography can improve this considerably.

Another challenge is how sites using rate limits decide who to trust to issue tokens. If an issuer misbehaves then the site’s rate limits become ineffective, enabling volumetric abuse. However, if we need to prevent the site from learning which issuers a user has access to, the site is only going to know that one of its trusted issuers was used, not which one. This makes mistakes or misbehaviour by an issuer difficult to detect, and makes it hard for sites to evaluate new issuers. Solving this challenge is essential for openness. Without adequate information, sites are likely to lean towards conservative issuer selection. That could lead to less choice between Anchors, which in turn could lead to a new form of gatekeeper being created. 

To solve this, sites at least need a way to calculate an aggregate score for each issuer they use. This should roughly correspond to how much of the traffic it considers abusive to have come from users using that particular issuer. Mozilla has long invested in systems like Prio which use multiparty computation (MPC) to protect user privacy whilst enabling aggregate measurements of system behaviour.

Privacy Pass also struggles to handle dynamic adjustments to rate limits. Once tokens have been issued, they’re difficult to invalidate without either revoking all active tokens or risking attacks which can compromise the privacy of users. It’s also beneficial if sites can adjust rate limits on a per client basis, for example by increasing rate limits where they become more confident the client is benign and withdrawing access when abuse is detected.

Anonymous Credit Tokens offer a useful building block to solve this problem. Conventional Privacy Pass schemes rely on issuing a bucket of tokens but ACT works differently by enabling the use of a credential with state. For example, an ACT credential can hold an internal counter. When the credential is presented, the site can check the counter is over some threshold and mutate it, increasing or decreasing the counter whenever the site’s perception of the holder has improved or worsened. Critically, the exact value is never leaked to the site, preventing the site from tracking the holder and ensuring successive presentations of the same credential can’t be linked.

Putting it together

So how can we combine these techniques to build a system which can enable privacy-preserving rate limiting on the open web? In May 2026, we participated in a W3C CG Meeting in collaboration with Cloudflare, Chrome and other web stakeholders in which we started sketching out a design we’re calling PACT – Private Access Control Tokens.

Rate limits need a starting point, a source of scarcity to anchor on. We’ll call an entity that provides such a source an Anchor. To a user who meets the Anchor’s criteria, like having a subscription, an account in good standing, or a verified phone number, an Anchor issues a batch of Endorsement tokens, following the Privacy Pass model. In practice, Anchors could be any website which has access to this kind of signal. An Endorsement conveys scarcity to other sites.

That’s enough for a simple system where access is either granted or denied. But as we discussed earlier, we also want the ability to increase access where a visitor behaves benignly and decrease it where they don’t. The state needed to enforce a rate limit can’t live in the Endorsement, because Endorsements cross trust boundaries between unrelated sites. We need a second object that can hold that state, scoped to the party that maintains it.

We’ll call that the party that handles rate limiting for a site a Moderator and the stateful object a Credential. A Credential is specific to a Moderator and, unlike endorsements, we limit each site to nominating a single Moderator. In the common case the site itself plays the Moderator role, so there’s no new entity or trust boundary. A Moderator can also be a third-party service shared across many sites, allowing those sites to cooperatively share a rate limit. 

In the terminology of the previous section, the Anchor is the issuer of Endorsements, and the Moderator both verifies Endorsements and issues Credentials. A Moderator manages rate-limit policy: it decides which Anchors it trusts, accepts their Endorsements, and issues a Credential in return.

Figure 2: (1) Clients acquire Endorsements from Anchors in the course of normal browsing to sites they have relationships with. (2) Clients can exchange Endorsements for a stateful Credential from a Moderator. (3) Credentials can be used to access sites which use that Moderator. Credentials can be updated over time.

Directly revealing which Anchor backed an Endorsement would leak a lot of information about the user. The issuer blinding techniques from the previous section solve this: when an Endorsement is redeemed, the Moderator only learns that it came from one of the Anchors it trusts, but not which one.

When a Moderator covers more than one site, we let Credentials be presented across all of them but partition cookies and storage as we would for any other third party site. The unlinkability of Credential presentations keeps this from creating a new cross-site identifier. The benefit is that good behaviour on one site improves access on every site the Moderator covers, and bad behaviour cuts it everywhere. Websites can already build the same capability with a shared account system, so this doesn’t create a new way to lock users out, but it does provide a new way to grant access without requiring users to give up their privacy.

Enabling Moderators that cover many sites carries a centralisation risk, similar to the concentration we see today in anti-abuse providers. The mitigation is that the choice of Moderator stays with each site, and the choice of trusted Anchors stays with each Moderator. This can’t reverse the centralisation pressure the web already faces, but it ensures this system won’t lead to additional lock-in: a new Anchor or a new Moderator can be adopted without coordinating with a dominant vendor.

The system then has three flows. First, the user receives Endorsements from an Anchor in the course of normal interaction, based on the Anchor’s positive view of the user. This is a relatively rare operation for any given user and Anchor. After all, as our source of scarcity, Endorsements should not be too easy to accumulate.

Figure 3: In the course of normal browsing, clients browse to websites they have a relationship with. These sites can act as Anchors by issuing Endorsements to clients.

Second, when the user arrives at a site that works with a Moderator, the browser spends an Endorsement from an Anchor the Moderator trusts and receives a Credential in return. The presentation hides which Anchor was used, and neither the Anchor nor the Moderator can trace the Endorsement back to where it was issued. The Moderator decides what initial balance the Credential starts with. If the user has no Endorsements from suitable Anchors at all, existing mechanisms (CAPTCHAs, account creation, federated login) could be used to bootstrap a Credential the same way, so the system degrades to today’s experience rather than locking the user out.

Figure 4: When the client browses to a site, it can prompt the client for a Credential from the Moderator it uses. If the Client doesn’t have a suitable Credential, but does have a suitable Endorsement, it can exchange it for a Credential with the Moderator. In practice, the Moderator and the Site might be the same server.  

Third, as the user browses, the browser presents the Credential and the Moderator updates the internal state of the Credential. The Moderator can reward behaviour that looks benign and penalize suspicious activity, but can’t track the use of the Credential or identify it if it’s used on other sites the Moderator covers. Revocation falls out of the same mechanism: a Moderator can refuse to return an updated Credential. 

Figure 5: The Client can present the Credential on sites which use the matching Moderator. Sites can check if the Credential is in good standing. The sites can then adjust the access the Credential has in response to behaviour. E.g. increasing it when they gain confidence in the client or reducing it in response to malicious behaviour.

In practice, all of this would happen transparently to the user through a WebAPI that sites acting as Anchors or Moderators would call from JavaScript. In an ideal ecosystem, users would accumulate Endorsements through normal browsing, just by virtue of the sites they already visit, and the rest of the flow would happen in the background as they move around the web, leaving users with meaningfully less friction.

AI agents acting on behalf of a user slot into the same flow. An agent can carry its user’s Credentials, in which case the user remains accountable for how the agent behaves. Sites would not need to grant any more access than they would to the user themselves. Alternatively, the operator of an agent can run its own Anchor and vouch for its agents the way other Anchors vouch for human users. Sites retain control over which Anchors they accept, so they can choose how to treat agent traffic without needing a separate detection mechanism.

Several mechanisms combine to keep the information about a user that flows out close to a single bit. Cryptographic unlinkability ensures successive Credential presentations cannot be tied to each other or to the original issuance, so a user’s visits cannot be joined into a history. Each site is bound to a single Moderator, so the set of Moderators a user has Credentials with never becomes a cross-site fingerprint. The Anchor-to-Credential exchange happens in an isolated browsing context, so during ordinary browsing the only thing the site or its Moderator ever observes is a Credential presentation: the site only learns if the user has a valid Credential below the rate limit, or nothing. When the Moderator updates a Credential, it adjusts the credentials state without learning what it is.

The additional privacy given to users from Issuer blinding makes participating in the system more challenging for Moderators. Because the Moderator can’t see which Anchor backed a Credential at issuance, it can’t give a Credential from a strong Anchor more access than one from a weak Anchor: doing so would itself leak which Anchor was used. The initial access has to be uniform across the Moderator’s whole pool of Anchors, which in practice means setting it at the strength of the weakest. However, this is only relevant for that initial access, the Moderator can update credentials according to the holder’s behavior, enabling Credential’s to accrue access over time.

Building an open ecosystem also requires that sites can make effective decisions about the Anchors they choose to trust. Multiparty computation systems like Prio enable aggregate scoring without compromising privacy. When users present Credentials, they can provide an encrypted share which identifies the anchor they used and can be privately aggregated to compute the quality of an issuer.

Next Steps

We think the architecture we’ve sketched for PACT has the right shape, but many of the details still need to be worked out and the entire system needs rigorous privacy and security analysis.

We want to do that work in the open. The IETF is the natural venue for the cryptographic protocols underneath, and the W3C for the WebAPI surface that sits on top. We’ll be bringing draft specifications to these bodies as soon as they’re ready, and we welcome collaborators from across the ecosystem: browser vendors, site operators, anti-abuse providers, and the cryptography community.

If successful, we think we can provide a system which will keep the web open and private, while still giving sites the rate-limiting signal they need.

Acknowledgements

The ideas described here are the result of collaboration and conversations with many people, including: Watson Ladd, Thibault Meunier, Michele Orrù, Trevor Perrin, Eric Rescorla, Samuel Schlesinger, Martin Thomson, Eric Trouton, Benjamin Vandersloot & Cathie Yun. 

The post PACT: Anonymous Credentials for the Web appeared first on Mozilla Hacks - the Web developer blog.

In this post we walk through what folks have found on their journey to learn the Rust programming language with ups and downs covered.

As a disclaimer, LLMs (Large Language Models) come up in this post because our interviewees brought them up. We're scoping discussion to their use as a learning tool, covering research and example generation, not broader questions about AI (Artificial Intelligence) in software development.

Many paths to needing Rust

The interviews surfaced several different paths into Rust: curiosity, embedded work, job-market pressure, organizational adoption, and reassignment after a team or company chose Rust. That last path matters because many learners are not evaluating Rust from a blank slate; they are trying to become productive after Rust has already arrived in their work.

"Funny enough, I've advocated for more niche languages than Rust in the past. Rust has pretty much stopped being as much of a niche language as it was, but it's not Java." -- Fractional CTO

Rust learning resources

Likely as expected, the folks that we talked to reach for a range of resources to learn Rust. Some reach for official documentation, such as The Rust Programming Language Book and find that sufficient to build on what the compiler was already showing them.

"I started with the official Rust documentation because there are a lot of great examples of how features like the borrow checker work." -- Software engineer at an Automotive supplier

Others needed more passes and more formats, sometimes reaching for resources the community maintains, such as Rustlings, The Little Book of Rust Macros, and Learn Rust With Entirely Too Many Linked Lists.

"The first time I went through the chapter in [The Rust Programming Language] on borrow checking, I was like, what is this? I read it again, then I watched a YouTube video of someone explaining the chapter." -- Rust freelance consultant

"Rust book, Rustlings, Zero to Production in Rust, Jon Gjengset tutorials. A bunch of books. It's not a one-pass reading. Can't say how many times I've gone through it." -- Software engineer working on video streaming and storage

These resources have brought up an entire generation of Rust programmers. But, to some, there is a perception that these resources have trouble keeping pace with the language.

"We'd like to use [The Rust Programming Language/'the book'], but we've found that it's out of date, unfortunately. We've looked at the GitHub repo and found it's got a lot of unresolved issues and unmerged PRs" -- Principal Software Engineering work on Rust adoption in a regulated industry

Whether or not this is factually true, Rust's growth has nonetheless put more scrutiny on these materials. Companies evaluating adoption and engineers getting reassigned to Rust teams are looking at them with fresh eyes and finding the gaps that affect their own evaluation.

Beginner stumblings and unlearning habits

It's pretty typical for Rust to be the 2nd, 3rd or Nth programming language that someone picks up. They'd end up writing their most familiar language in Rust, whether C++ patterns, Java patterns, or whatever they knew, for months or even years. Eventually they got comfortable enough to start writing idiomatic Rust.

"There's a bit of a drop in productivity compared to C if you're already familiar with it just because you're learning new rules, new syntax." -- Principal Firmware Engineer (mobile robotics)

"In the beginning it was more poking around the code and adding and removing some ampersands and asterisks to try to make sense of mut and not mut and whatever." -- Senior engineer with 20 years of Java experience in cloud and IoT

We also spoke with someone who found that not having much of a programming background seemed to benefit people picking up Rust. Not having worn-in grooves from other languages may play a role here, and it's worth investigating further.

"I had someone who had never programmed much before start working on the internals of [our Rust project]. She was just fine with getting into Rust. It's more of the senior people that struggle as they need to unlearn practices which may work in other languages, but it's not the 'Rust' way." -- Researcher, Automotive OEM R&D Lab

Learning to work with the borrow checker

We heard a lot about learning to work with the borrow checker instead of against it. People get there through different paths, but a few patterns came up repeatedly.

The compiler as teacher

Rust's diagnostics did the teaching on their own, especially around lifetimes.

"If you mess up the lifetimes in a piece of code that you've written by hand, I usually find that Rust's diagnostics are very helpful" -- Researcher working on static analysis of Rust programs

"Whatever's missing, the compiler usually fills in: it tells me 'you need to declare the lifetime of this reference', so I know and can figure it out. That all generally works pretty well." -- Senior Software Engineer

Learning by doing

Others felt like they only really internalized the borrow checker after writing a lot of Rust. It took projects, coding challenges, prototyping and so on until at some point it clicked.

"I actually did not understand the borrow checker until I spent a lot of time writing Rust" -- Founder of a startup built on Rust

"Besides the prototyping work, I also did coding-challenge-type stuff to get familiar with Rust for Advent of Code. [..] It eventually clicked to the point where I wasn't fighting with Rust, it was working for me. I had that experience other people describe: when I managed to get my program to fit with Rust, it worked. I didn't spend time debugging." -- Principal Software Engineer, large SaaS provider

Letting go of "clone guilt"

Some learners arrive with the assumption that good Rust means zero clones, zero copies, lifetimes threaded through everything. They set the bar at optimal before they've learned how to write idiomatic Rust, and it makes the borrow checker feel harder than it needs to be at the outset.

"On one of my first projects, I was like, 'I don't ever want to copy or clone anything,' so I carefully wove through all the lifetimes and got myself into a bit of a bind. Then I saw someone else just cloning the struct I was working with, and it was super cheap. Sometimes you can just clone and it's going to be okay." -- Researcher at a university

The experienced Rust developers we spoke with consistently said the same thing: clone freely while you're learning, then optimize when you understand the problem. Rust's reputation for performance and correctness feeds this. Newcomers assume anything less than optimal is wrong before they've written a first working program, and clone guilt is how that shows up.

We think it could be an interesting area of future study to check into the patterns Rust programmers employ at different levels of experience and under which circumstances. One member of the Rust Vision doc team that's very experienced with Rust noted that there's kind of an "expected shape" they understand as passing the compiler. This knowledge influences how they approach writing code which wouldn't take that shape and they naturally find themselves understanding when to use so-called workarounds, such as passing around indices into arrays or Vecs.

Multi-paradigm, but not the OOP some are used to

The Rust programming language is multi-paradigm, and how that lands depends on what you're coming from. We heard some that came from a functional background were delighted with digging into learning how much Rust inherits from that lineage. Some others noted that they and others on their teams struggled to unlearn the object-oriented style they'd come to use heavily in other languages like C++ and Java.

"Developers coming from C++ tend to think object-oriented. I think that's a difference between C++ and Rust." -- Architect at Automotive OEM

"I had exactly that thing, where I would apply all my years of Java and JS thinking, where I could just create some object, not care about it, return it, have it sloshing around between various functions. Found myself reaching for these patterns and then being told 'no, you cannot do that'." -- Principal Engineer at a SaaS company

Developers coming from functional programming had less to unlearn: strong typing, pattern matching, and an expression-oriented style were already familiar.

"My background has been more functional programming, strong typing. That originated for me as a Lisper: once a Lisper, always a Lisper." -- Principal Software Engineer working on Rust tooling for safety-regulated industries

"The languages I primarily used before Rust were things like OCaml. Way back, I came from C and C++, the classic languages, and then I spent quite a long time doing primarily pure functional stuff. These days I've ended up back in what I like to think of as a pragmatic center ground [with Rust]." -- Fractional CTO

Teaching Rust in academia

We spoke with a university professor that's been teaching Rust generally. In the academic environment, they were able to use proxies for some things such as "traits are like interfaces in Java" because the students had already gone through a set of courses in their first and second years that taught them Java. They introduced concepts slowly throughout the course, choosing to deal with some more complex topics like generics later. The outcome generally was that students had no problem picking up Rust in this setting.

"I couldn't see any big difference on the embedded side. We also teach an embedded class, and we did an experiment. Half of the students' feedback was worse on the Rust class, mostly because they needed to build the project themselves. The C students just got one from [an LLM], absolutely no problem." -- University Professor, on teaching Rust

The C cohort leaned on LLMs for the project in ways the Rust cohort couldn't. We don't yet have a clear answer for why.

What did come through clearly was the Rust cohort's experience with the community. Some students needed to figure out which drivers to use for the embedded project and how to use them. Their professor encouraged them to open issues and ask questions directly on GitHub, and the maintainers responded. Students who had never contributed to open source before were getting answers from the people who wrote the code.

Learning using LLMs

Some experienced folks shared that they saw LLMs as a tool that can help someone come up to speed quickly, either as a research tool or for generating example Rust code to understand concepts.

"I'm optimistic that there's a way to work [LLMs] in that will cut down that learning curve. One of the big things these tools bring is reducing the learning curve in general; these are very good tools to help you navigate a space that you don't know yet." -- Maintainer of large open source Rust crate

"I try [LLMs] out once a month, usually for generating an example or something like this. Just like with Stack Overflow: when you read an example, you should read it carefully and try to understand it. Not copy and paste it, but type it in your own words in code and then check it, because that's where the teeny tiny little mistakes are." -- Founder of startup built on Rust

For some learners, an LLM is just another way to find answers, no different than a search engine.

"So for the most part, picking up Rust - how do I learn? I'll [use web search for] things, I'll ask [an LLM], I'll just poke around and read the code." -- Senior Software Engineer working in a regulated space

One founder went further and claimed that LLMs change who can become a Rust developer. One consulting company founder described hiring high school graduates with no systems programming background and training them as Rust developers, with LLMs filling in the learning gaps that would previously have required years of experience.

"At the beginning, I was worried, but now that we have [LLMs] supporting development, the difficulty of the language doesn't matter. I'm seeing a huge opportunity behind strong runtime languages like Rust. [..] In [Developing Country] we hire 20-25 high school graduates, train them to be Rust programmers, then they enhance our workforce worldwide." -- Founder of a consulting company

We heard this from one organization. This is a claim that the combination of Rust's compiler and LLM tooling can dramatically shorten the path from beginner to working developer. Whether it generalizes depends on questions we can't answer from a single interview: how long these developers stay, what kind of code they can maintain independently, and whether this training/learning model works outside this company's particular structure. If it holds up, the pool of people who can become Rust developers is much larger than the usual hiring profile suggests.

Organizational considerations for Rust learners

We spoke with a number of folks on teams that are using Rust in larger organizations. Teams wanted to know that everyone would end up at roughly the same level of competence, which led a good number to invest in training courses to get there. Some leaders found that staff was able to ramp well enough by reading The Rust Programming Language, going through Rustlings, and then picking up lower risk and priority tickets to work on. Having a sense of community was also important within companies; it helps people know they are not alone when they are asked to work on Rust after, say, a reorganization happens.

"[..] the idea with the class as opposed to 'just read the Rust book on your own' was that this gives everyone kind of the same baseline going in." -- Principal Firmware Engineer (mobile robotics)

"So typically we're going to have people work through Rustlings, work through The Rust Programming Language. We have them then start to pick up lower risk tickets to work on." -- Principal Engineer at a large SaaS provider

"We've got an internal Slack channel for Rust learning where people can drop questions and others will come in and answer them. That helps build up understanding and community." -- Software Engineer at a large corporation

Some organizations found that while the person they'd hire would need to learn Rust, it was still preferable to the alternative of hiring someone for a critical piece of software written in another language.

"They needed to grow and maintain this C++ codebase. They had a C++ wizard, and they tried for about two years to find someone with the same level of expertise. They ended up hiring people that didn't know Rust and ramping them up, creating FFI bindings from the C++ side so they could work in Rust. And you can feel it: the borrow checker is teaching these people the right way to handle their systems." -- Principal Engineer at an Automotive OEM

The community and helping each other aspect seems to grow bonds as organizations mature.

"Our team is [all about] mentorship. I've mentored people coming up to speed on Rust, and people help each other hugely." -- Principal Software Engineer at a large SaaS company

Silent attrition

We identified some cases where people have approached Rust and bounced off of it, for one reason or another. In the below case, someone with a background in a language with fewer guardrails found themselves frustrated enough with Rust to walk away.

"All of that means that that embedded ecosystem is very frustrating to somebody who comes from C and is like, why can't I just get a pointer to this peripheral and then write into the registers. What are you doing to me? [..] My friend never got over that. He looked at it and said, I'm not going to deal with this and walked away." -– A second University Professor

There may be language features that for a particular domain are not seen as comfortable or usable yet, such as async Rust usage in a safety domain. We'd like to map which language features feel off-limits in which domains; async in safety-critical work probably isn't the only case.

"We're not fully sure how async [Rust] will work out in the long run in our domain. [..] People don't feel comfortable yet since C++14 doesn't provide such concepts. [..] It's the chicken-and-egg problem again: we probably need to gain some experience to see whether we can actually benefit from these new concepts in the automotive and safety domains." -- Team Lead at Automotive Supplier (ASIL D target)

We heard in at least one case, that while the language was challenging and there was a near bounce, the tooling helped keep them coming back and trying.

"Well, I think my early impressions of Rust - one is I find C++ so intimidating, and I think a big part of why I was able to succeed at [..] learning Rust is the tooling. I mean, all this makes sense [..] but it's like, for me, getting started with Rust, the language was challenging, but the tooling was incredibly easy." -- Founder of another startup built on Rust

While it might be considered more of a community concern, if there are interactions online and in spaces that point to learners having so-called "skill issues" this feeds into the narrative that Rust must be hard to learn. We may be unintentionally turning away Rust Project contributors and maintainers due to the vibes being put out when new learners show up in certain spaces.

"People are very helpful, but generally the attitude is: if your program is very complicated, it's mostly a skill issue. There's not that much empathy when people get stuck learning, and a lot of people are just pushed away by it. There's probably a huge number of people who silently stop wanting to write Rust, because at some point it gets complicated and the feedback they get is 'you just need to be a better programmer, obviously'." -- Software Engineer at a SaaS Provider

Feedback on near-bounces from survey

We found a few interesting perspectives collected in the Rust Vision doc survey which we administered with examples of bouncing and coming back:

"I started before 1.0, got stuck very soon when trying to translate patterns from C++ to Rust (due to borrow checking). I tried again after 1.0 and it stuck. [..]" -- Survey Respondent A

Survey Respondent A went on to share in a more detailed response about a perceived weakness in Rust learning materials related to lifetimes and the borrow checker are explained. There was an observation that it's fairly easy to run into more complex situations with lifetimes and the borrow checker. They felt that the current state of this sort of material and tutorials is fairly superficial and can leave learners stuck when they run into those more complex situations.

One respondent that bounced once and came back shared challenges around usage of async. In concert with Rust's memory-safety and the borrow checker, they found some of the nitty-gritty details of async were difficult to learn. While we're aware of the Rust Project's continuous efforts to improve Rust's async story, this is another data point of a user that faced challenges.

Another survey respondent shared how they had multiple times bounced in trying to learn Rust. They returned after a year or so and found Rustlings to be highly motivating. We note that having multiple pathways for folks to learn Rust opens up more possibilities for those that nearly bounced, just like this person.

Need more focused work on silent attritrion

The thing that stood out most to us was the lack of real, first-hand knowledge of having bounced when learning Rust. While this is an obvious effect of soliciting answers to our survey and opportunities to interview through Rust channels and our networks, this cohort is good future candidate where interviews could start.

Conclusions

Across these conversations, the experience of learning Rust depended heavily on context. Why someone was learning and what support they had mattered as much as the borrow checker. The same kinds of examples kept coming up: a training course that got a team to a shared baseline, a maintainer answering a student's first GitHub issue, and a colleague whose code showed that cloning was okay.

That context is largely something the community has a hand in. With that in mind, here is what we take away from what we heard, and what we still don't know.

What seems worth trying

Learning materials aimed at unlearning. Syntax barely came up when people described their struggles. People struggled with unlearning habits from previous languages, whether OOP structuring from C++ and Java or the instinct to grab a raw pointer to a peripheral. Most of our learning materials teach Rust from first principles, and that works. What we didn't come across is much written for, say, the engineer with ten years of Java who lands on a Rust team after a reorg: material that names the patterns they'll reach for that won't transfer, and shows what to do instead. The professor we spoke with did a version of this in the classroom, leaning on "traits are like interfaces in Java" and saving generics for later in the course, and the students did fine. Something similar could work outside the classroom too.

Put the "clone freely while you're learning" advice somewhere official. Every experienced developer we spoke with gave the same advice, but learners seem to mostly pick it up by accident, like the researcher who happened to see someone else cloning the struct they had been carefully threading lifetimes through. Saying it early in official materials would take some of the steepness out of the curve. The broader version belongs there too: idiomatic Rust doesn't have to mean optimal Rust, especially on a first project.

Diagnostics are already a primary learning resource: several people told us the compiler taught them lifetimes before any documentation did. Diagnostics reach learners right at the moment they're stuck. When writing new ones, it seems worth keeping the confused newcomer in mind alongside the expert, because for a lot of people this is where the learning happens.

Is "the book" actually out of date? Whether or not The Rust Programming Language or other materials are actually behind, a team evaluating Rust looked at its repository, saw unresolved issues and unmerged PRs, and moved on. As more companies evaluate adoption, more people will look at these materials with the same fresh eyes. Visible issue triage and some communication about what's current and what's planned would address the perception, separately from whatever content work may or may not be needed.

How stuck learners get treated is shaping who stays. We heard about students getting answers on GitHub from the maintainers who wrote the code, and we heard about learners being told their struggles were a skill issue. The first group came away with a lasting good impression of Rust. Some of the second group walked away entirely, and because they leave quietly, it's easy to underestimate how many of them there are. The welcoming side of the community came up unprompted as a reason people stayed, so we know it makes a difference when we get this right.

Every organization we spoke with described essentially the same ramp-up for bringing a team to Rust. Teams that brought groups of developers to Rust described roughly the same approach: get everyone to a shared baseline with a training course or with The Rust Programming Language and Rustlings, start people on lower-risk tickets, and give them somewhere internal to ask questions. Several organizations also found that hiring developers without Rust experience and ramping them up worked out better than continuing to search for rare expertise in another language. None of this is complicated, and teams weighing adoption don't need to invent a training program from scratch.

What we still don't know

The biggest gap is the people we didn't reach. Nearly everyone we spoke with stuck with Rust long enough to be reachable through Rust channels, so the stories of bouncing off came to us second-hand: a friend who walked away from embedded Rust, colleagues who quietly stopped after the responses they got. As we wrote in our first post, finding people who decided against Rust takes targeted outreach. If the proposed User Research team comes together, talking with learners who bounced would make a good early project, and learning is probably the area where that research would teach us the most.

We also don't know what to make of LLMs as a learning tool yet. They came up as a search engine, as an example generator, and in one organization's case as something that makes training high school graduates into working Rust developers possible. We saw a classroom where the C cohort leaned on LLMs in ways the Rust cohort couldn't, and we don't have an explanation for it. All of this comes from a handful of conversations, so we treat it as a set of leads to follow up on. Given how quickly the tools are changing, it seems better to study this deliberately than to wait and see what folklore develops.

The folks we spoke with showed that people do get there: with enough passes through the materials and enough code written, it eventually clicks. The opportunities above are mostly about making it work for the people who didn't pick Rust on purpose, and for the ones who would have stuck around if their early experience had gone a little differently.

While previous policy updates focused heavily on certificate revocation, automation, and operational resilience, MRSP v3.1 focuses on a different challenge: ensuring that Certification Authority (CA) operations are sufficiently transparent, understandable, and auditable.

Trust in the Web PKI depends not only on technical requirements, but also on the ability of Mozilla, auditors, and the broader community to understand how CA systems are designed, operated, and assessed. MRSP v3.1 introduces new requirements intended to improve the quality of CA documentation and strengthen independent assurance of the design and effectiveness of controls that protect CA systems.

Improving CP/CPS Documentation

Certification Practice Statements (CPSes) and combined Certificate Policy / Certification Practice Statement documents (CP/CPSes) are among the most important public documents published by a CA. They describe how a CA conducts its operations and meets industry requirements.

Over the years, we have seen significant variation in the quality, structure, and level of detail provided in CP/CPS documentation. Some documents provide extensive implementation detail, while others rely heavily on incorporation by reference or provide only high-level descriptions of CA practices.

The revised policy will continue to require conformance with RFC 3647, as modified by applicable CA/Browser Forum requirements. Improvements to section 3.3 in the MRSP will establish clearer expectations regarding the content and quality of CP/CPS documentation. The new requirements emphasize that documentation must be explicit, bounded, auditable, and sufficiently detailed to describe the CA operator’s certificate issuance and management activities, while also establishing requirements for version control, accessibility, and ongoing maintenance. The objective is to ensure that a technically competent reviewer will be better-able to determine what commitments the CA has made, how those commitments are implemented, and whether the documented practices support technical, operational, and performance oversight.

Mozilla believes that these new CP/CPS requirements will improve transparency, reduce misunderstandings, support more effective audits, and help reduce the risk of certificate misissuance by ensuring that operational practices are documented accurately, consistently, and in sufficient detail to permit meaningful review.

Introducing Detailed Controls Reports

A second major enhancement in MRSP v3.1 is the introduction of Detailed Controls Reports (DCRs). Traditional WebTrust and ETSI audit reports provide valuable independent assurance regarding compliance with established criteria. However, they generally provide only limited visibility into the specific controls, testing procedures, and operational environments that support those conclusions.

Beginning with audit periods starting on or after July 1, 2027, CA operators with root certificates enabled for TLS website authentication will be required to obtain a DCR. The purpose of the DCR is to provide CA management, auditors, and Mozilla with greater visibility into the controls, testing, and operating effectiveness of CA systems that support compliance with the CA/Browser Forum’s TLS Baseline Requirements and Network and Certificate System Security Requirements. Mozilla generally expects to review DCRs only on an as-needed basis, such as during compliance reviews, incident investigations, root inclusion evaluations, or other oversight activities.

A DCR must include:

• The scope and boundaries of the audited CA systems;
• Applicable audit criteria;
• Controls implemented by the CA;
• The auditor’s testing procedures;
• Results of control testing; and
• Information regarding control exceptions or deficiencies.

Mozilla expects that DCRs will complement existing audit reports and strengthen transparency and assurance by providing additional detail regarding system boundaries, control implementation, testing procedures, and control effectiveness that is not typically available in traditional audit reports. Effective compliance requires more than documented policies and successful audits; it also requires management understanding, oversight, and engagement. By providing greater visibility into CA systems, controls, testing activities, and operational risks, DCRs can help reinforce a strong tone at the top regarding compliance expectations, support informed decision-making and resource allocation, enable earlier identification of weaknesses, and promote a culture of continuous improvement. The intent is not to replace existing audit reports, but to provide additional information that supports effective governance, oversight, and informed trust decisions.

Additional Clarifications and Improvements

MRSP v3.1 also includes several targeted clarifications and refinements:

• aligns Mozilla’s mass revocation planning requirements with the corresponding CA/Browser Forum Baseline Requirements, helping ensure consistency across compliance frameworks;
• clarifies audit expectations for root inclusion requests, including requirements relating to audit continuity and root key generation ceremonies;
• requires root CA key pairs submitted for inclusion to have been generated within the previous five years, helping ensure that newly included roots are based on contemporary cryptographic practices and controls; and
• clarifies expectations when ownership or operational control of a CA changes, helping ensure that Mozilla receives timely notice and can evaluate the impact of acquisitions or organizational changes on continued compliance.

Looking Forward

Mozilla recognizes that these changes will require preparation by CA operators, auditors, and other ecosystem participants. To support implementation, Mozilla is publishing accompanying wiki guidance regarding both CP/CPS Documentation and Detailed Controls Reports.

As with previous policy updates, these changes were informed by discussions with CA operators, auditors, and members of the Web PKI community. We appreciate the feedback received during the review process and look forward to continued collaboration as the ecosystem evolves.

Mozilla has a longstanding focus on building confidence in the Web PKI through transparency, accountability, and continuous improvement. By requiring higher-quality CP/CPS documentation and strengthening independent assurance, MRSP v3.1 advances Mozilla’s commitment to protecting its users and maintaining their trust in the systems that help secure the web.

The post Improving Transparency and Assurance in the Web PKI: Mozilla Root Store Policy v3.1 appeared first on Mozilla Security Blog.

If you have a previous version of Rust installed via rustup, getting Rust 1.96.1 is as easy as:

rustup update stable

If you don't have it already, you can get rustup from the appropriate page on our website.

What's in 1.96.1

Rust 1.96.1 fixes:

• Missing retries / timeouts in Cargo's HTTP client
• Miscompilation in a MIR optimization

It also fixes three CVEs affecting libssh2 (which is compiled into Cargo):

• CVE-2025-15661
• CVE-2026-55199
• CVE-2026-55200

Contributors to 1.96.1

Many people came together to create Rust 1.96.1. We couldn't have done it without all of you. Thanks!

If you have a previous version of Rust installed via rustup, you can get 1.97.0 with:

$ rustup update stable

If you don't have it already, you can get rustup from the appropriate page on our website, and check out the detailed release notes for 1.97.0.

If you'd like to help us out by testing future releases, you might consider updating locally to use the beta channel (rustup default beta) or the nightly channel (rustup default nightly). Please report any bugs you might come across!

What's in 1.97.0 stable

Symbol mangling v0 enabled by default

When Rust is compiled into object files and binaries, each item (functions, statics, etc) must have a globally unique "symbol" identifying it. To avoid conflicts when linking together different Rust programs, Rust mangles the original name of items to include additional context such as the module path, defining crate, generics, and more. Historically, this mangling was based on the Itanium ABI, also (sometimes) used by C++.

The new mangling scheme resolves a number of drawbacks from the previous one:

• Generic parameter instantiations preserve their values, rather than being tracked solely behind a hash
• Inconsistencies: not all parts used the Itanium ABI, meaning that custom demangling was still necessary

Since Rust 1.59, the compiler has supported opting into a Rust-specific mangling scheme via -Csymbol-mangling-version=v0. Since November 2025, this scheme has been enabled by default on nightly, and 1.97 is now enabling it on stable Rust. The legacy mangling scheme can only be enabled on nightly, and the current plan is to fully remove it.

See the previous blog post for more details.

Cargo support for denying warnings

It's common practice to deny warnings in CI. Historically, doing so is typically done through RUSTFLAGS=-Dwarnings. With Rust 1.97, Cargo controls how warnings interact with build success: either silencing them (via allow level), rendering without failing (default, warn), or denying them (via deny).

As a result of Cargo configuration determining the behavior, using this feature doesn't invalidate the underlying build cache, meaning that it's easy to temporarily opt-in. For example, if warnings are adding unwanted noise while working through fixing errors after a refactor, you can run CARGO_BUILD_WARNINGS=allow cargo check, temporarily silencing them.

In CI, jobs can instead set CARGO_BUILD_WARNINGS=deny to deny warnings. This can be combined with --keep-going to collect all errors and warnings rather than stopping on the first failing package.

See the documentation for more details.

Linker output no longer hidden by default

rustc invokes a linker on behalf of users. Historically, rustc has silenced linker output by default if the link completes successfully. This can mask real problems, though, so in Rust 1.97 we are enabling linker messages by default. These are emitted as a warning lint, for example:

warning: linker stderr: ignoring deprecated linker optimization setting '1'
  |
  = note: `#[warn(linker_messages)]` on by default

Common linker messages that have been diagnosed as false positives or intentional behavior are filtered out by rustc. Several defects have already been fixed as a result of no longer hiding this output on nightly.

Note that currently, linker_messages is a special lint that is not affected by the warnings lint group. This is intentional as rustc generally doesn't control linker output as precisely, and it's not uncommon for output to only appear on some platforms. If you are seeing what you think is a false positive output from the linker, please file an issue.

To silence the warning in the mean time, you can configure the lint level to allow. This can be done through Cargo.toml by adding a lints section like this:

[lints.rust]
linker_messages = "allow"

Stabilized APIs

• Default for RepeatN
• Copy for ffi::FromBytesUntilNulError
• Send for std::fs::File on UEFI
• <{integer}>::isolate_highest_one
• <{integer}>::isolate_lowest_one
• <{integer}>::highest_one
• <{integer}>::lowest_one
• <{uN}>::bit_width
• NonZero<{integer}>::isolate_highest_one
• NonZero<{integer}>::isolate_lowest_one
• NonZero<{integer}>::highest_one
• NonZero<{integer}>::lowest_one
• NonZero<{uN}>::bit_width

These previously stable APIs are now stable in const contexts:

• char::is_control

Other changes

Check out everything that changed in Rust, Cargo, and Clippy.

Contributors to 1.97.0

Many people came together to create Rust 1.97.0. We couldn't have done it without all of you. Thanks!

If you have a previous version of Rust installed via rustup, getting Rust 1.97.1 is as easy as:

rustup update stable

If you don't have it already, you can get rustup from the appropriate page on our website.

What's in 1.97.1

Rust 1.97.1 fixes a miscompilation in an LLVM optimization.

We have backported both an LLVM fix and a disable of the underlying change in Rust 1.97.0 of Rust's generated IR that increased the likelihood of this happening. However, note that the underlying miscompilation has been present since at least Rust 1.87.

If you'd like to help us out by testing future releases, you might consider running your code's CI or locally using the beta channel (rustup default beta) or the nightly channel (rustup default nightly). Please report any bugs you might come across!

Contributors to 1.97.1

Many people came together to create Rust 1.97.1. We couldn't have done it without all of you. Thanks!

Thanks to Micro Center for sponsoring this video!
Check out Micro Center's Desktop Deals: https://micro.center/6e567d
Sign up for a FREE 128 gig Flash Drive at Micro Center Austin, Texas: https://micro.center/6e567d
Sign up for a FREE 128 gig Flash Drive at Micro Center North Jersey: https://micro.center/f0e700
Visit Micro Center News: https://micro.center/cd7061

Downloading apps seems straight forward, but on mobile it's anything but. There are hoops to jump through, pop-ups to fend off, and monolithic app stores to contend with. Getting full control on Android is even slipping further and further away. Join us as we embark on a journey to get to the bottom of sideloading.

Thanks to the founders of the Alt Store, Riley Testut and Shane Gill for helping us with this episode.

Leave a reply with your requests for future episodes.

► SHOP OUR PRODUCTS: https://lttstore.com
► GET A VPN: https://www.piavpn.com/TechQuickie
► GET EXCLUSIVE CONTENT ON FLOATPLANE: https://lmg.gg/lttfloatplane
► SPONSORS, AFFILIATES, AND PARTNERS: https://lmg.gg/partners

The post GitHub ordered to remove decentralized messaging app Bitchat in India appeared first on CyberInsider.

The post Hackers Use Fake Claude Desktop and Bing Ads to Deliver SectopRAT to 29 Organizations appeared first on Cyber Security News.

Zwei große Änderungen hat es in den vergangenen Jahren bei Phishing-Angriffen gegeben: Die Kriminellen erstellen mithilfe von generativer KI sprachlich fast perfekte Mails, die in Stil, Struktur und Tonalität kaum noch von legitimen Nachrichten zu unterscheiden sind. Wo früher holpriges Deutsch sofort Misstrauen geweckt hat, liest sich heute eine Phishing-Mail wie eine echte Mitteilung von Microsoft, einer Bank oder einem Paketdienst.

Auch das Design wirkt meist höchst professionell. Zum anderen sind auch die technischen Tricks beim Datendiebstahl heute höher entwickelt. Einige Maschen umgehen sogar eine Zwei-Faktor-Authentifizierung. Das Ziel der Angreifer bleiben vor allem Zugangsdaten, Session-Tokens und persönliche Infos.

1. Microsoft-365-Log-in-Falle trickst Zwei-Faktor-Anmeldung aus

Eine neue Angriffsmethode verwendet den originalen Microsoft-Anmeldedialog und kommt entsprechend fast ohne gefälschte Webseiten aus. Die Kriminellen nutzen dafür den Oauth-Device-Code-Flow. Das ist ein Anmeldeverfahren für Geräte oder Programme, die keinen brauchbaren Browser oder keine komfortable Texteingabe bieten, etwa Smart-TVs, IoT-Geräte, Drucker oder CLI-Tools.

Offiziell heißt er „OAuth 2.0 Device Authorization Grant“. Mit der Methode lassen sich auch Konten übernehmen, die mit einer Zwei-Faktor-Authentifizierung geschützt sind.

Die Kriminellen schicken an ihre Opfer eine Phishing-Nachricht und geben vor, das Gerät der Opfer müsste für den Log-in ins Microsoft-365-Konto neu autorisiert werden. Die Nachrichten beginnen meist harmlos, etwa mit „Ihre Sitzung ist abgelaufen“, und bieten einen Link zur Neuanmeldung. Wenn das Opfer dem Link in der Nachricht folgt, landet es zunächst auf einer gefälschten Website, schließlich aber beim offiziellen Microsoft-Authentifizierungsverfahren für Geräte und Anwendungen (Oauth-Device-Code-Flow).

Proofpoint

Es handelt sich um echte Microsoft-Meldungen und Webseiten. Allerdings autorisiert das Opfer nicht den Zugang zu seinem eigenen PC oder Smartphone, sondern eine Anwendung der Kriminellen. Diese bekommen nach der Freigabe durch das getäuschte Opfer einen Access-Token. Damit kann die feindliche Anwendung per API auf das Microsoft-Konto zugreifen, ohne dass noch einmal ein Passwort eingegeben werden muss.

Übrigens: Die meisten dieser Angriffe verstecken den Link zur gefälschten Website in einem QR-Code. Dieser entgeht den Spam-Filtern eher als ein üblicher Link, und es lässt die meisten Opfer vom PC auf das Smartphone wechseln.

Auf diesem ist es wegen des kleineren Bildschirms und oft fehlender Sicherheits-Software noch wahrscheinlicher, dass das Opfer die Täuschung nicht bemerkt. Eine ausführliche Analyse der Angriffe auf Microsoft-365-Konten haben die Sicherheitsexperten von Proofpoint veröffentlicht.

2. Support-Masche: Ihr Computer ist gesperrt & Co.

Die Support-Masche ist zwar nicht neu, funktioniert aber nach wie vor: Noch immer fallen zahlreiche Menschen auf die perfide Betrugsstrategie herein. Zu den prominenten Opfern zählt Bundestagspräsidentin Julia Klöckner.

Mutmaßlich staatlich organisierte Angreifer kontaktierten sie über den Messenger-Dienst Signal und gaben sich als vermeintliche Signal-Support-Mitarbeiter aus. Unter einem Vorwand forderten sie Klöckner und weitere Politiker auf, ihre PIN einzugeben. Dadurch erlangten die Angreifer Zugriff auf die Signal-Konten der Betroffenen – und damit auf private Chats und Kontakte.

Das Bundesamt für Verfassungsschutz und das Bundesamt für Sicherheit in der Informationstechnik (BSI) haben gemeinsam einen Leitfaden veröffentlicht, der potenziellen Opfern hilft zu prüfen, ob ihr Signal-Konto übernommen wurde.

Bundesnetzagentur

Ebenfalls weiterhin verbreitet sind Angriffe durch angebliche Microsoft-Support-Mitarbeiter. Die Betrüger kontaktieren ihre Opfer per Telefon, E-Mail oder über gefälschte Pop-up-Warnungen im Browser.

Dabei behaupten sie, der Windows-PC habe ein Sicherheitsproblem – etwa sei der Computer gesperrt oder mit Schadsoftware infiziert. Anschließend versuchen sie, die Betroffenen zur Installation einer Fernwartungssoftware oder eines vermeintlichen Sicherheitstools zu bewegen. Tatsächlich erhalten die Angreifer dadurch oft vollständigen Zugriff auf den Rechner.

3. Gefälschter Microsoft Defender warnt

Der Microsoft Defender ist ein Windows-Bordmittel und schützt PCs gegen alle bekannten PC-Viren. Entsprechend alarmierend ist für viele Nutzer eine Warnung dieses Antiviren-Tools. Eine gefälschte Form dieser Warnung erscheint mal per E-Mail, mal als Pop-up im Browser. In diesen Nachrichten wird behauptet, der Schutz des Defenders müsse kostenpflichtig erneuert werden. In der Folge werden die Nutzer auf gefälschte Shop-Webseiten geleitet, die eine Zahlung für einen Virenschutz verlangen.

Grundsätzlich gilt: Der Microsoft Defender ist auf Privat-PCs ein Bordmittel und kostenlos in Windows enthalten. Eine Zahlung ist nicht nötig. Sollte die Warnung per Mail bei Ihnen landen, löschen Sie diese einfach. Schlägt sie als Pop-up im Browser auf, schließen Sie einfach das Browser-Fenster, notfalls mit der Tastenkombination „Alt+F4”.

Der Antivirenspezialist Norton hat eine Anleitung veröffentlicht, die erklärt, wie sich solche Pop-up-Warnungen im Browser beseitigen lassen, falls sie sich im System festgesetzt haben.

4. Microsoft-Onedrive: Cloud-Phishing über Freigaben

Cloud-Dienste wie Onedrive von Microsoft nutzen viele Windows-Nutzer mehrmals täglich. Genau deshalb sind sie ein attraktives Ziel für Phishing. Statt klassischer E-Mails mit Dateianhängen erhalten die Nutzer Freigabe-Benachrichtigungen mit einem Betreff wie „Dokument wurde mit Ihnen geteilt“. Der Inhalt wirkt meist harmlos und oft beruflich relevant: Rechnungen, Projektpläne, Gehaltslisten oder interne Dokumente.

Besonders tückisch ist die Kombination aus echten und gefälschten Elementen. Manche Angriffe nutzen tatsächlich legitime Cloud-Plattformen, bieten dort aber manipulierte Dokumente an. Das Ziel dieser Angriffe sind mehrheitlich die Log-in-Daten der Opfer zu Ihren Cloud- und Mail-Konten. Diese werden dann von den Angreifern übernommen und etwa für neue Phishing-Attacken genutzt.

5. Lieferdienste, Lieferdienste und noch mal Lieferdienste

Phishing im Namen von Paketdiensten gehört zu den stabilsten Angriffsmustern überhaupt und wird gleichzeitig immer ausgefeilter. Der Grund ist die hohe Alltagstauglichkeit: Fast jeder erwartet regelmäßig Lieferungen und ist deshalb kaum misstrauisch, wenn eine Mail, SMS oder Whatsapp zum Thema Paketversand eintrudelt. Moderne Varianten enthalten nicht nur einfache Textlinks, sondern vollständige Tracking-Systeme.

Arne Arnold

Diese Seiten sind dynamisch aufgebaut und simulieren echte Logistikprozesse. Beim Sendungsverlauf heißt es dann etwa: „Zustellung fehlgeschlagen – bitte Adresse bestätigen“ oder „Letzte Möglichkeit zur Terminänderung“. Besonders kritisch ist die Kombination aus Zeitdruck und Kontext. Wer Opfer eines solchen Angriffs wird, gibt meist seine Log-in-Daten für Shopping- oder Zahlungsdienste preis. Oder er überweist den Angreifern direkt Geld, da angeblich Steuern, Bearbeitungsgebühren oder ein Expresszuschlag fällig sind.

Arne Arnold

Übrigens: Ab dem 1. Juli 2026 gibt es zusätzliche Abgaben auf Sendungen aus Nicht-EU-Ländern. Für Waren unter 150 Euro sind dann pauschal 3 Euro Zollgebühr und eine Einfuhrumsatzsteuer fällig. Einige Kurierdienste verlangen zusätzlich eine Servicepauschale für diese Zollanmeldung. Über die genauen Kosten informiert eine Seite der Verbraucherzentrale NRW. Es lohnt sich, die tatsächlichen Kosten zu kennen, denn es ist wahrscheinlich, dass zu diesem Termin vermehrt Phishing-Mails zu diesem Thema versendet werden.

6. Phishing zu Online-Banking gibt es immer

Phishing zum Online-Banking gibt es fast schon so lange wie das Online-Banking selbst. Die Bedrohungslage ist aber so angespannt wie nie, denn die Angriffe sind nun wirklich zahlreich. Über die neuesten Phishing-Fallen informieren unter anderem die Verbraucherzentralen.

Beispiele aus dem Mai 2026 lauten etwa so: „Bestätigung Ihrer Mobilfunknummer erforderlich“. Absender ist vorgeblich die Easybank. Eine Fälschung von Commerzbank-Mails warnt vor einem fälligen „Photo-TAN Update“, bei dem ein „einmaliger Abgleich der Zugangsdaten“ nötig ist.

Andere Phishing-Mails geben vor, von der Deutschen Bank zu sein, und fordern eine Reaktivierung des „photoTAN-Sicherheitszertifikats“. Auch Kunden der DKB erhielten im Mai Phishing-Mails.

Verbraucherzentrale

Sollten Sie eine Mail von Ihrer Bank bekommen, klicken Sie auf keinen Fall auf einen der Links in dieser Mail. Wenn Sie sich unsicher sind, ob Sie reagieren sollen, rufen Sie die Website Ihrer Bank über Ihren Browser auf.

Sollte es tatsächlich ein Anliegen der Bank geben, wird es Ihnen nach dem Einloggen in Ihr Online-Konto angezeigt. Oder Sie rufen Ihre Bank einfach per Telefon an und fragen, ob Informationen von Ihnen benötigt werden.

7. Phishing per Post: Kreditbetrug per Postident-Verfahren

Diese Phishing-Angriffe erreichen Sie per Post in Ihrem echten Briefkasten. Die Briefe geben vor, von Ihrer Bank zu stammen, und fordern Sie auf, Ihre Daten erneut per Postident zu bestätigen. Postident ist ein Verfahren der Post, mit dem Sie Ihre Identität gegenüber anderen, etwa einer neuen Bank oder einem Kreditinstitut, bestätigen können. Wer das beigefügte Schreiben nutzt, legitimiert in der Regel einen hohen Kredit bei einer anderen Bank.

Schäden von 15.000 bis 25.000 Euro sind hier keine Seltenheit. Vorangegangen ist meist ein Diebstahl Ihrer genauen Daten (Postadresse, Hausbank, Arbeitgeber, Verdienst), den die Angreifer dann nutzen. An die Daten kommen die Kriminellen etwa über gefälschte Wohnungsinserate bei Immoscout24 oder ähnlichen Portalen. Wer sich auf eine Wohnung oder ein Haus mit Gehaltszetteln und weiteren Angaben bewirbt, hat bereits alle wichtigen Daten für den Postident-Betrug verraten. Seien Sie beim Postident-Verfahren stets besonders vorsichtig. Konkrete Tipps lesen Sie hier.

Sicherheitstipps: Phishing erkennen und blockieren

An diesen Merkmalen erkennen Sie betrügerische Nachrichten:

• Unverlangter Kontakt: Sie erhalten eine E-Mail, Whatsapp oder SMS über eine Gutschrift, eine Lastschrift oder andere finanzielle Ansprüche, obwohl Sie aktuell keine Buchung storniert oder reklamiert haben.
• Zeitdruck: Die Nachricht suggeriert dringenden Handlungsbedarf und fordert zur schnellen Reaktion auf.
• Verdächtige Links: Die Links in der Nachricht sind hinter einem QR-Code maskiert, führen zu unpassenden Domains oder sind ungewöhnlich lang.
• Aufforderung zur Dateneingabe: Seriöse Unternehmen fordern in Nachrichten oder Mails nur äußerst selten zur Eingabe sensibler Daten auf.
• Unpersönliche Anrede: Oft fehlt die namentliche Ansprache oder es werden generische Formulierungen verwendet.

Diese Maßnahmen schützen vor Phishing-Fallen:

• E-Mail, SMS und Whatsapp & Co. sind keine geschlossenen Nachrichtenkanäle: Sie müssen damit rechnen, auch betrügerische Nachrichten zu erhalten.
• Misstrauen Sie Links in Nachrichten: Klicken Sie keine Links an und scannen Sie keine QR-Codes, wenn Log-in-, Zahlungs- oder Sicherheitsaufforderungen in der Mail stehen. Öffnen Sie den jeweiligen Dienst im Browser über die manuelle Eingabe der Adresse.
• Nutzen Sie Browser und Passwortmanager als Frühwarnsystem: Wenn Ihr Passwortmanager Ihre Log-in-Daten auf einer Webseite nicht einfügen möchte, dann ist die Domain vermutlich gefälscht. Achten Sie zudem auf die Warnungen Ihres Browsers.
• MFA aktivieren: Nutzen Sie immer eine Zwei- oder Multifaktor-Authentifizierung, wenn diese angeboten wird. Vor allem Passkeys erhöhen die Sicherheit.
• Remote-Support misstrauen: Installieren Sie keine Fernwartungs-Tools, nachdem Sie unaufgefordert kontaktiert wurden.
• Freigaben hinterfragen: Wenn Sie Freigaben für Dateien in Cloud-Speichern erhalten, kontaktieren Sie zunächst den Absender, idealerweise telefonisch.

Infos zu aktuellen Angriffen: Informieren Sie sich über Phishing-Kampagnen etwa bei der Verbraucherzentrale NRW.

Als letzte Verteidigungslinie lassen sich Antivirenprogramme, Browserschutz und Spezial-Tools einsetzen:

• Antivirus: Große Sicherheits-Suiten wie G Data Internet Security filtern Phishing-Mails heraus, bevor sie diese Nachrichten öffnen.
• Browser-Schutz: Browser von Sicherheitsanbietern blockieren viele aktuelle Phishing-Seiten, etwa der KI-Browser Norton Neo.
• Spezial-Tools: KI-Chatbots wie Scamio von Bitdefender begutachten verdächtige Nachrichten und warnen vor gefährlichen Inhalten.

Arne Arnold

Read more of this story at Slashdot.

You're reading Codeberg bans hosting ‘mostly’ AI-generated code, a blog post from OMG! Ubuntu. Do not reproduce elsewhere without permission.