Executive summary 

A group of Russian state-supported cyber actors has been targeting and compromising various Western government and commercial organizations using the Zimbra Collaboration Suite (ZCS) software since at least July 2025. The Russian state-supported advanced persistent threat (APT) group’s activity is tracked in the cybersecurity community under several names (see Cybersecurity industry tracking), primarily as “LAUNDRY BEAR,” a name initially coined by the Netherlands General Intelligence and Security Service (AIVD) and Defence Intelligence and Security Service (MIVD) [1].

LAUNDRY BEAR’s targeting is almost certainly to gather sensitive information for the Russian Federation, with these actors primarily focusing on the covert acquisition of email data. Previous campaigns indicated LAUNDRY BEAR relied on unsophisticated initial access techniques—including password spraying, phishing, and pass-the-cookie—allowing the group to successfully run high-volume operations. The latest campaign targeting ZCS uses a novel exploit that was a zero-day vulnerability when first exploited and continues to be successfully exploited. The vulnerability, Common Vulnerabilities and Exposures (CVE) CVE-2025-66376, was patched in November 2025. This demonstrates LAUNDRY BEAR’s intent and ability to deploy increasingly sophisticated technical capabilities.

Unlike traditional phishing campaigns that persuade a user into taking an action, such as clicking a link or opening a file, LAUNDRY BEAR’s latest campaign leverages a view-based exploit that only requires a user to view a malicious email within a vulnerable version of the webmail service. Once viewed, the exploit attempts to exfiltrate the victim’s last 90 days of email communications, the organization email directory (i.e., Global Address List [GAL]), and other sensitive information to servers controlled by LAUNDRY BEAR. The exploit also attempts to establish persistent access to victim accounts through a variety of means as detailed in the Persistence and credential access section.

This Cybersecurity Advisory (CSA) warns of this ongoing malicious threat activity and urges organizations to update their vulnerable software and implement additional mitigations to thwart these Russian state-supported actors’ continued success. The CSA is being released by the following authoring and co-sealing agencies:

• United States National Security Agency (NSA)
• United States Federal Bureau of Investigation (FBI)
• Netherlands Defence Intelligence and Security Service (MIVD)
• Netherlands General Intelligence and Security Service (AIVD)
• United States Cybersecurity and Infrastructure Security Agency (CISA)
• United States Defense Counterintelligence and Security Agency (DCSA)
• United States Department of Defense Cyber Crime Center (DC3)
• United States Department of the Treasury
• United States Naval Criminal Investigative Service (NCIS)
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Communications Security Establishment Canada’s (CSE’s) Canadian Centre for Cyber Security (Cyber Centre)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• United Kingdom National Cyber Security Centre (NCSC-UK)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)¹
• Danish Defence Intelligence Service (DDIS)²
• Estonian Foreign Intelligence Service (EFIS)³
• Finnish Defence Intelligence (FDI)⁴
• Finnish Security and Intelligence Service (SUPO)⁵
• French General Directorate for Internal Security (DGSI)⁶
• French National Cybersecurity Agency (ANSSI)⁷
• Italian External Intelligence and Security Agency (AISE)⁸
• Italian Internal Intelligence and Security Agency (AISI)⁹
• Security and Intelligence Service of the Republic of Moldova (SIS RM)¹⁰
• Polish Foreign Intelligence Agency (AW)¹¹
• The Military Counterintelligence Service of Poland (SKW)¹²
• Spain National Intelligence Centre (CNI)¹³
• Sweden National Cyber Security Centre (NCSC-SE)¹⁴

The authoring agencies urge any organizations using ZCS to implement the recommendations listed within the Mitigations section of this advisory to reduce the risk associated with this activity. This CSA also includes specific remediations for organizations to implement if they discover the presence of the listed Indicators of compromise (IOCs).  

As more organizations update their ZCS software based on this CSA, LAUNDRY BEAR may discontinue the current campaign exploiting this vulnerability; however, based on the success of this and previous campaigns, it is very likely that the group will continue to target ZCS and other email systems used by organizations in Western countries. The actors will almost certainly continue to rely on email to engage potential victims by exploiting novel vulnerabilities and, when necessary, use social engineering techniques to assist with their efforts. The authoring agencies recommend organizations regularly update their mail service software and continuously monitor their email systems and emails for malicious activity.

For a downloadable list of IOCs, see:

• AA26-204A.stix.xml (STIX XML)
• AA26-204A.stix.json (STIX JSON)

Cybersecurity industry tracking

The cybersecurity industry provides overlapping cyber threat intelligence, indicators of compromise (IOCs), and mitigation recommendations related to these Russian state-supported cyber actors. While not exhaustive, the following are threat group names commonly used for these actors within the cybersecurity community:

• LAUNDRY BEAR
• Void Blizzard [2]
• CL-STA-1114 [3]
• TA488 (formerly UNK_PitStop) [4]

Note: Cybersecurity companies have different methods of tracking and attributing cyber actors, and this may not be a 1:1 correlation to the U.S. government’s understanding for all activity related to these groupings.

Background

Public advisories from Netherlands General Intelligence and Security Service (AIVD), Netherlands Defence Intelligence and Security Service (MIVD), and Microsoft highlighted these Russian state-supported advanced persistent threat (APT) actors in May 2025, calling them LAUNDRY BEAR and Void Blizzard respectively [1] [2]. Both advisories assessed that the group was engaged in malicious cyber activity as early as April 2024.  

The May 2025 advisories highlighted a cluster of activity targeting cloud-based email environments, including Microsoft Exchange in particular, and abusing legitimate APIs to perform data exfiltration in bulk [T1114.002]. The group relied on unsophisticated means of initial access, including procuring stolen credentials on criminal marketplaces [T1078], and using social engineering techniques to lure targets into interacting with a malicious site masquerading as a legitimate one. As of April 2025, one of these sites resembled a European Defence & Security Summit registration portal that required registrants to sign in to their Microsoft account to view. Once a user entered their Microsoft credentials into this malicious site, LAUNDRY BEAR’s modified version of the open source adversary emulation toolkit, Evilginx, intercepted the user’s credentials. LAUNDRY BEAR then used this authentication data, including passwords and session tokens, to access the compromised account and conduct mass email exfiltration, as well as harvest other information. This method of compromise is commonly known as an adversary-in-the-middle (AiTM) technique [T1557].  

Beginning around July 2025, LAUNDRY BEAR shifted toward a more technical method of email compromise, highlighting their continued efforts to covertly acquire email communications from a variety of Western organizations of interest and deliver them to the Russian Federation. Using a custom-developed capability [T1587.001] named “Улей” or “Ulej” (Russian for beehive), LAUNDRY BEAR successfully targeted and exfiltrated sensitive user information from organizations who use the Zimbra Collaboration Suite (ZCS) product [T1114]. Data LAUNDRY BEAR attempted to exfiltrate from compromised accounts included:

• Last 90 days of emails,
• Email address,
• Password [T1589.001],
• Global Address List (GAL) [T1087],
• Two-factor authentication (2FA) tokens, and
• Newly-created Application Passcode [T1098].

The covert and persistent nature of this activity, along with the absence of any known financial extortion, almost certainly indicates this group’s involvement in espionage activities with Russian government backing. Additionally, extensive Ukrainian targeting, prior to use against U.S. and other NATO allies, outlines an increasing trend within Russian cyber threat groups to target Ukrainian users first—both as a priority target and as a testbench for malicious cyber techniques before broader global deployment.

Targeting details

LAUNDRY BEAR has targeted and compromised users in various organizations, including those associated with:

• the Defense Industrial Base (DIB),  
• the federal and local government,
• education,
• energy,
• law enforcement,  
• media,  
• non-governmental organizations, and
• technology.

Technical details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise framework, version 19. This advisory also uses MITRE D3FEND^TM version 1.4.0¹⁵. See Appendix A and Appendix B for tables of the activity mapped to MITRE ATT&CK and D3FEND tactics, techniques, and countermeasures.

Ulej is a novel data exfiltration and aggregation capability, that currently (as of the publication of this report) supports a campaign specifically targeting users of ZCS webmail servers. This capability is used to exploit CVE-2025-66376 [Common Weakness Enumeration (CWE) CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')], but likely could be adapted to exploit other vulnerabilities. It exfiltrates emails and other sensitive user data from a victim’s system immediately after exploitation and stores the data in an actor-controlled unattributable virtual private server (VPS) [T1074.002] running LAUNDRY BEAR’s “Flowerbed” collection framework. The collected data is almost certainly further exfiltrated to internal network resources for review and long-term retention.

Reconnaissance

LAUNDRY BEAR uses the Ulej capability to exploit the CVE-2025-66376 vulnerability in organizations using ZCS. This campaign’s targeted victimology and limited exploitation capabilities likely indicate this group manually identifies and targets the victim organizations. LAUNDRY BEAR likely identifies organizations with public-facing Zimbra infrastructure by port scanning [T1595] and fingerprinting datasets easily procured through various commercial vendors [T1596.005].  

After identifying a target organization, the group likely compiles email addresses for individual users to target with the exploit [T1589.002] from datasets offered by commercial vendors [T1597.002], open source intelligence [T1593], or previously exfiltrated data [T1597].  

Resource development

The actors procure VPSs from a variety of providers [T1583.003], including those with Know Your Customer (KYC) requirements, and often use fabricated identities. LAUNDRY BEAR primarily uses Mullvad VPN [T1583] when interacting with these servers, further demonstrating the group’s intent to mask their identity and maintain operations security (OPSEC). After the server is provisioned, an automated process deploys the Docker containers necessary for Ulej’s Flowerbed framework [T1608], which then receives and aggregates the data Ulej exfiltrates. These servers are typically only used for 7-60 days before moving to new infrastructure.

Flowerbed framework

Flowerbed is a Python project that uses Docker for containerization. The project includes four different Docker containers:

• Catcher,
• Certbot,
• Nginx, and
• Gardener.

Catcher acts as both a DNS and HTTP server to receive and aggregate exfiltrated victim information [T1048]. For additional information on Catcher, refer to the Exfiltration section of this advisory. Flowerbed’s next container, Certbot, is based on one of the official Certbot containers, which allows for automated generation of Let’s Encrypt certificates using DNS challenges through Cloudflare. This certificate can then be used by the Nginx container, which serves as an HTTPS reverse proxy for Catcher, enabling Flowerbed to disguise some of its exfiltration activity through an encrypted communications channel [T1048.002]. The Nginx reverse proxy also validates that the Server Name Indicator (SNI) value contains “*.i.*” prior to forwarding the traffic to Catcher. If the SNI does not contain that string, the Nginx server returns a 444 error to the client. This is likely an attempt to reject non-Ulej connections. Finally, the Gardener container functions as a health check for the Catcher service. Gardener is a simple Python script that validates Catcher correctly receives and processes data.

The simplistic Flowerbed codebase has indications that artificial intelligence (AI) played a role in its development. This highlights how AI is increasingly being used to develop malicious capabilities [T1588.007]. The dependence on AI for a simple capability, such as Flowerbed, alongside a previous reliance on open source capabilities, such as Evilginx2 [T1588.002], likely indicates a lack of advanced technical knowledge within LAUNDRY BEAR, especially in relation to true software development capabilities.

Initial access

To gain initial access, LAUNDRY BEAR sends an email containing a malicious JavaScript payload to the target [T1566]. Through exploitation of CVE-2025-66376, this JavaScript payload is immediately executed once the user views the malicious email [T1203], such as the one shown in Figure 1, in the ZCS webmail platform. Since at least November 2025, LAUNDRY BEAR began sending these phishing emails from victim infrastructure through compromised accounts [T1199], as shown in the email metadata in Figure 2. These compromised accounts were likely previous victims of this, or another LAUNDRY BEAR, campaign and their use is intended to further obfuscate and frustrate anti-phishing tools and training.

According to the National Vulnerability Database (NVD), CVE-2025-66376 was initially published on 5 January 2026. This vulnerability allows for execution of a JavaScript payload included in email content due to improper sanitization of Cascading Style Sheet’s (CSS) @import directives within an email [5]. Because the activity attributed to this campaign began in July 2025—months before Synacor released a patch and the CVE was published—the payload initially exploited a zero-day vulnerability at that time [T1587.004].  

Utilization of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability.

Hidden in LAUNDRY BEAR’s email is a Base64 encoded payload within the “onload” field of a Scalable Vector Graphics (SVG) element [T1027.017], as shown in Figure 3. Leading up to the inclusion of this payload in the SVG element are various instances of @import directives, as required to leverage CVE-2025-66376. This payload includes an XOR encrypted final script encoded in a Base64 inner payload (see Figure 3) [T1027.013]. The outer payload decodes and decrypts the inner payload using an XOR function and a hardcoded key and then executes the script contained within the inner payload containing the collection and exfiltration logic. By changing the key used for the XOR encryption of the inner payload or adding additional @import directives with non-functional code [T1027.010], LAUNDRY BEAR can easily generate new payloads that bypass basic threat detection signatures. This malicious payload attempts to collect and exfiltrate information in 12 asynchronous stages [T1119]. The stages in order of appearance within the payload are as follows:

1. sendStartPing,
2. gather_email,
3. gather_environment,
4. gather_2fa_codes,
5. gather_app_password,
6. gather_device_status,
7. gather_oauth_consumers,
8. gather_autocomplete_password,
9. enable_mail_protocols,
10. gather_gal,
11. sendArchives, and
12. sendFinishPing. 

Use of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability [T1587].

Persistence and credential access

To establish sustained persistence into the victim’s email account, the script attempts to modify account preferences and collect authentication information. Any collected credentials are later exfiltrated, as further described in the Exfiltration section below. Other campaigns attributed to LAUNDRY BEAR also demonstrated the group’s ability to circumvent multi-factor authentication through session token replay [T1550.004], and the Zimbra campaign follows a similar trend.

The script used in this campaign tries to discover the victim’s email address during the gather_email stage [T1087]. The script searches for this email address in two ways. First, it examines the batchInfoResponse variable, which an HTML script element on the webpage can define, for an email address. Even if the script finds an email address there, it also checks whether it acquired a Cross-Site Request Forgery (CSRF) token as described later in the Collection section of this advisory. If so, the script uses the “GetIdentitiesRequest” Simple Object Access Protocol (SOAP) command under the “ZimbraAccount” namespace to determine the victim’s email address [T1185] and then exfiltrates it. However, if the script does not have a CSRF token or the SOAP request fails, the script exfiltrates the email value recovered from the first method instead. If both attempts fail to capture the victim’s email, the script sends a JavaScript Object Notation (JSON) payload with a key of “email” and value of null over HTTPS and does not attempt DNS exfiltration.

During the gather_autocomplete_password stage, the script attempts to collect the victim’s saved password via the autocomplete feature of the victim’s password manager. The script injects two HTML div elements requesting login credentials onto the page outside of the victim’s view, as shown in Figure 4 and Figure 5. After waiting five seconds, the script then attempts to extract the password provided automatically by the password manager from the input element shown in Figure 4. If there is no value in that input field, it checks the password input field shown in Figure 5. If neither input field contains a value, a JSON payload with a key of “autocomplete_password” and value of null is sent over HTTPS and DNS exfiltration is not attempted.

LAUNDRY BEAR almost certainly relies on a mail client using the Internet Message Access Protocol (IMAP) for persistent access to the victim’s mailbox. During the enable_mail_protocols stage, a SOAP request leveraging the “ModifyPrefsRequest” command under the “ZimbraAccount” namespace is sent. This request attempts to set the “zimbraPrefImapEnabled” preference to TRUE. While the default setting for “zimbraPrefImapEnabled” is not well documented, this action is almost certainly intended to ensure that IMAP access to the victim’s mailbox is enabled.

ZCS does not support 2FA for some mail clients, including IMAP. To support users who rely on IMAP clients, ZCS allows for the generation of Application Passcodes. Application Passcodes are randomly generated passwords that can be used for clients that cannot support the normal 2FA process to authenticate. During the gather_app_password stage, the script makes a SOAP request using the “CreateAppSpecificPasswordRequest” command under the “ZimbraAccount” namespace to create a new Application Passcode [T1556.006]. The SOAP request uses “ZimbraWeb” as the name of the application.

Additionally, the script also attempts to collect 2FA tokens. During the gather_2fa_codes stage, the script makes a SOAP request using the “GetScratchCodesRequest” command under the “ZimbraAccount” namespace. The script then attempts to exfiltrate any non-null 2FA codes collected this way. The number of codes can vary, and each code is exfiltrated to Flowerbed individually.

Collection

As demonstrated in the Persistence and credential access section, this script relies heavily on SOAP requests to collect victim information. To make these requests, the script aims to acquire the victim’s current CSRF token, which it attempts to access within the webpage’s local storage using localStorage.getItem("csrfToken"). If the script is unable to acquire this CSRF token, it will be unable to make any SOAP requests. In addition to the SOAP commands documented in the Persistence and credential access section, other SOAP commands executed to collect victim information are shown in Table 1.

The script attempts to collect the victim’s GAL through brute force by searching for each two-character combination from a character set of “abcdefghijklmnopqrstuvwxyz1234567890.-_”. These queries are conducted using 20 batches of SOAP requests with 77 “SearchGalRequest” SOAP commands in each batch except for the last request containing only 58.

During the gather_environment stage, the script attempts to determine which type of ZCS webmail client the victim is using. The script checks the user’s current URL to determine the client type being used, checking for certain indicators (shown in Table 2) to determine the client type. The corresponding value is then used as the payload when exfiltrating the client type.

As part of collection, the script attempts to harvest any emails not marked as “junk” from the last 90 days from the victim’s account. Emails are collected daily by an HTTP GET request to the URL path, “/home/~/?fmt=tgz&meta=0&query=date:-{DAY_OFFSET}d AND (not in:junk)”. The {DAY_OFFSET} value would be between 0 and 89 representing how many days ago the email was sent or received. To prevent redundant collection and exfiltration of emails, a variable with a name based on the email date being queried, using a format of zd_comp_YYYY-MM-DD, and value of true, is saved to the window.top.localStorage property. This variable is saved regardless of whether the email is successfully exfiltrated.  

According to Mozilla documentation, if the user is not in a private browsing session, any data stored to localStorage does not typically expire. This means that if the user happens to execute the script again from the same computer, the script avoids attempting to re-exfiltrate previously captured emails. However, the script always attempts to pull any emails with a {DAY_OFFSET} of zero. In other words, the script always pulls emails sent or received the same day it is run. After email results are returned from the query for each day of email activity, those results are then passed to Flowerbed as described in the Exfiltration section.

The script also provides LAUNDRY BEAR with telemetry on any errors that occur during the collection process. This is accomplished by executing any collection or exfiltration code through helper functions that contain error handling logic. If an error occurs, a payload containing information on the error itself, the context of the error happening, and the stage in which the error occurred is sent to Flowerbed as described in the Exfiltration section below. For cases where the error occurs within a SOAP request, “:api” is concatenated to the stage value in the payload. If an error occurs during the batch SOAP requests that occur when collecting the GAL of the victim, the stage value will use a format of gather_gal:{VAL}:api. The {VAL} placeholder indicates which batch request, a number from 0 to 19, the error occurred in. Errors that occur during the password autocomplete interception process will use “gather_autocomplete_password:dom” for the stage value. Finally, if an error occurs when attempting to collect or exfiltrate a specific day’s emails, the stage will include which day the error occurred on, using the previously defined placeholder {DAY_OFFSET}, with a format of sendArchive:day-{DAY_OFFSET}.

Exfiltration

At the end of each stage in the collection process, the script attempts to exfiltrate acquired information to Flowerbed. The script primarily relies on two forms of data exfiltration: DNS [T1048.003] and HTTPS. Some information is exfiltrated over both the DNS and HTTPS channels.

Prior to exfiltration, a randomized 10- or 11-character alphanumeric string is generated as an identifier for the victim. This identifier is included in the URL of both the DNS- and HTTPS-based exfiltration.  

DNS exfiltration

DNS exfiltration occurs through DNS A record queries. To ensure data exfiltrated through DNS is not corrupted when traversing through non-actor-controlled DNS infrastructure, Ulej maintains compliance with RFC 1035, Domain Names - Implementation and Specification, specifically accounting for the case insensitivity and subdomain length requirements. Base32 encoding is used to create a case-insensitive payload. Once the payload is encoded, a period (“.”) is added every 60 characters to ensure each subdomain is under 63 characters long. The script then creates a new image object sourced from a URL with the scheme defined in Figure 6. Any traffic involving DNS exfiltration will have “d-“ prefixing the victim identifier, and the subdomain immediately following indicates the type of information being exfiltrated.

When the script generates an image object, the browser tries to retrieve the complete domain of the URL specified as the source of the image. This triggers a DNS request sent to the actor-controlled server and processed by Flowerbed. Table 3 lists both the information exfiltrated via DNS and their corresponding data type identifiers in the DNS queries.  

HTTPS exfiltration

Any information exfiltrated via DNS is also exfiltrated through HTTPS, as well as additional data including email content, contacts, attachments, and error logging information. By using Let’s Encrypt certificates, this group can quickly deploy new infrastructure and leverage encrypted HTTPS communications with valid server certificates when exfiltrating information from the victim’s environment. The HTTPS exfiltration capability only uses two HTTP content types, defined in Table 4. Traffic associated with HTTPS exfiltration will use the URL scheme shown in Figure 7.  

Some of the data transmitted via HTTPS uses the standard JSON content type format. The script includes the information in a POST request to actor-controlled infrastructure.  

Table 5 provides a summary of the JSON-based exfiltration.

The script transmits all HTTPS exfiltration not identified in Table 5 using the Octet-Stream content type as binary data. The POST requests for this method include a filename in the “X-Filename” header. Traditionally, developers use headers prefixed with “X-” to denote custom headers that do not follow a defined standard. The purpose of including this header remains unclear since the Catcher capability ignores the provided filename when saving the data. Table 6 summarizes the data exfiltrated in this format.

The script sends all exfiltrated data identified in Table 6 to the Catcher service exactly as received from the SOAP request in a JSON payload, except for email exfiltration. For email exfiltration, the script sends it as a GZIP compressed archive [T1560]. Although most of the exfiltration consists of valid JSON, the script still attempts to exfiltrate all information identified in Table 6 using the application/octet-stream content typing rather than application/json.

At the beginning and end of the collection and exfiltration activity, during the sendStartPing and sendFinishPing stages respectively, the script submits a POST request with a JSON payload to indicate that the script is starting or finishing execution. Throughout execution, the script also logs error events and send the logs using similar JSON payloads. The script sends the JSON in a POST request to the URL documented in Figure 2, using a URL path of “/v/p” and with a “subtype” key that shows which type of action it logged (start, finish, or error).  

Catcher

Ulej exfiltrates information to Flowerbed to be handled by a service named Catcher. Catcher is a containerized Python application, running in Docker as part of Flowerbed, which is detailed in the Resource development section. It receives exfiltrated data and temporarily stores it, enabling its eventual transfer to infrastructure designed for long-term, secure storage.

Catcher acts as an HTTP server over port 8000 and a DNS server on port 53. As described in the Resource development section, the Flowerbed project uses an additional Docker container running an Nginx reverse proxy to enable HTTPS support. This reverse proxy uses a certificate generated by Let’s Encrypt and forwards all traffic with an SNI containing “*.i.*” to port 8000 within the Catcher container.

The DNS service can accept A, AAAA, MX, TXT, and CAA queries. For any MX, AAAA, or CAA queries, the server will always provide an empty response. The system only supports TXT records as needed to process Automatic Certificate Management Environment (ACME) requests, which enable the assignment of Let’s Encrypt certificates. If the server receives an A query, Catcher will always respond with the public IP address of the Flowerbed server.  

However, if a query includes a domain formatted as shown in Figure 6 and Figure 7, the service saves a log file in JSON format to disk containing the following details of the DNS query:

• Time of query,
• Source IP address for query,
• Queried domain, and
• Type of query.

The HTTP server typically responds with OK, except in cases where the path is “pixel.gif” when the response contains a 1x1 gif image with a SHA-256 hash of ef1955ae757c8b966c83248350331bd3a30f658ced11f387f8ebf05ab3368629. Like the DNS service, the HTTP service will only log entries when the domain found in the host header of the request follows the expected formatting as seen in Figure 6 and Figure 7. As the HTTPS exfiltration uses non-standardized binary and JSON-formatted payloads when exfiltrating to Catcher, Catcher will check the content type of the request. If the content type is set to “application/json”, Catcher encodes the data in Base64 and includes it in the JSON log entry written to disk. If the content type is set to any other value, Catcher leaves the Base64 payload in the JSON log entry blank and saves the payload to a separate file with the same filename as the JSON log entry with a “.bin” file extension. An HTTPS exfiltration event causes Catcher to save a JSON formatted log file to disk containing the following information from the HTTP request:

• Time,
• Source IP address,
• Request method,
• Host,
• Path,
• Query string,
• Headers, and
• Base64 payload.

These JSON event log files and binary output files are then initially saved to the directory /root/hits/tmp and later moved to the /root/hits/ready directory once processed. This prevents incomplete files, which are still being uploaded to Catcher, from premature exfiltration from the server. Approximately every 60 seconds, a likely automated workflow establishes a Secure Shell (SSH) connection with the server hosting Flowerbed for a few seconds, almost certainly exfiltrating the data processed by Catcher to non-public-facing infrastructure. The command in Figure 8 also executes hourly to remove all files last modified at least two days ago from the /root/hits/ready directory.

Response strategies

Mitigations

In many cases, by the time an organization identifies a compromise related to this campaign, numerous sensitive and proprietary emails have already been exfiltrated. The significant risk posed by this cyber threat emphasizes the importance for organizations that use ZCS and other similar webmail solutions to take proactive steps to mitigate this risk.

All organizations that use the ZCS webmail service should immediately prioritize ensuring that their ZCS is not running a vulnerable version. A patch for CVE-2025-66376 was released for both 10.1.13 and 10.0.18 versions of ZCS [D3-AH]. If immediate patching is not feasible, organizations should advise employees to use alternative mail clients to access email and avoid using the Classic ZCS webmail client until ZCS is updated to a non-vulnerable version [d3f:Isolate].

System administrators should closely monitor any Internet-connected ZCS or other email systems and the workstations that access those systems and promptly apply available software updates [D3-AH]. Administrators can maintain awareness of active vulnerability exploitation by referencing open source resources, including CISA’s Known Exploited Vulnerabilities Catalog and NCSC-UK’s Responding to active exploitation of vulnerabilities guidance.

Organizations should consider using a third-party authentication service that supports passkeys for authentication to mediate access to ZCS and other services that do not natively support passkeys. By doing so, organizations can work to eliminate the possibility of automated password collection from autocomplete or password reuse [D3-CH]. However, Application Passcodes may still be necessary and should be monitored closely.  

Organizations should implement network monitoring capabilities with collection and short-term retention of packet capture or NetFlow data and maintain log collection and storage [CPG 3.Q]. This will allow organizations to monitor for and identify suspicious network activity [CPG 4.B], such as:

• Significant amounts of outbound data being sent to IPs associated with VPS providers not used by the organization [D3-NTA];
• Frequent DNS queries for a suspicious domain with seemingly random subdomains [D3-DNSTA];
• A sudden spike of connections to a server associated with a recently established domain [D3-NTCD]; and  
• Connections to internal services, such as webmail, from VPN providers frequently leveraged by this group for nefarious activity, such as Mullvad VPN [D3-NTCD].

Additionally, for organizations that can inspect the content of outbound HTTPS connections via break-and-inspect infrastructure, security teams should identify traffic matching the characteristics described in the Exfiltration section of this advisory.

Indicators of compromise (IOCs)

Flowerbed infrastructure

The following indicators have been attributed to use by LAUNDRY BEAR for their campaign targeting ZCS’s webmail service as of the publication of this advisory. (Disclaimer: Due to the frequency of operational structure changes by this group, these indicators are intended solely for historic attribution purposes. Some indicators, such as IPs, compromised emails, and domains, may be outdated, so organizations should check for current activity before acting on these IOCs.) Table 7 provides details about the server infrastructure used to host Flowerbed, and Table 8 lists the corresponding SHA-1 hash values for the Let’s Encrypt certificates used by that infrastructure [D3-IAA].

LAUNDRY BEAR has used the following email addresses to procure resources used for this campaign:

• ivanka.zurabishvili@proton[.]me,
• zmul1@buildandconsulting[.]com,
• garrysmithme@pinmx[.]net, and
• hostingclient@pinmx[.]net.

Phishing distribution

LAUNDRY BEAR primarily relied on ProtonMail for distribution of malicious email. However, as stated above, LAUNDRY BEAR’s more recent efforts likely have shifted to distributing the payload through previous victims.  

The following email addresses have distributed payloads attributed to this campaign:

• c.laurent.ejfa@proton[.]me,
• j.moreau.epsc@proton[.]me,
• liberty.insights@proton[.]me,
• certain email addresses (presumably compromised) at the isofts.kiev[.]ua domain (i.e., ending with @isofts.kiev[.]ua), and
• certain email addresses (presumably compromised) at the navs.edu[.]ua domain (i.e., ending with @navs.edu[.]ua).

Additionally, the following are SHA-256 hashes of email samples containing the malicious payload attributed to this campaign:

• 98df604ecc57f884a2e6ce3266a0013ad64455cac48442c2312cfa4765007aaf,
• 60db9abae75cd8ccc49dd7ea5feb41677566dcd442f12ebc5745ffd2810fb874,
• b1f5beb1175fc5c7d1806a2f0d900eb124c54f0286c5c52b66eea7a6633adb1d, and
• 1517b3caa495f6c4e832df9c75fc94667e3c233773f7fa4e056d5e30e5ead760.

Post-compromise artifacts

Currently, the script does not remove artifacts. This leaves additional opportunities to identify victims of this activity. While emphasis should always be placed on consistent monitoring of network traffic and endpoint activity, there are a variety of persistent artifacts described below that can be used to identify victims of this campaign.

This Ulej capability relies on creating a significant number of SOAP requests to collect account information for exfiltration. ZCS logs from these requests are stored, by default, in the /opt/zimbra/log/mailbox.log file [D3-PA]. A significant amount of SOAP request activity that aligns with what was described in the Persistence and credential access and Collection sections of this advisory could indicate a potential compromise. Specific examples of high-risk SOAP request activity might include:

• Many SearchGalRequest command requests from a single user over a short period of time;
• Use of the CreateAppSpecificPasswordRequest command, especially in cases where it is creating an Application Passcode named “ZimbraWeb”; and
• Use of the GetScratchCodesRequest command.

While LAUNDRY BEAR uses the localStorage property to track what days had emails previously exfiltrated, defenders can use this property to identify victims of this campaign and determine the scope of exfiltrated information [D3-PA]. Review of the items stored in that property for an organization’s ZCS webmail client page on an endpoint device could indicate compromise if there are items named with a format of zd_comp_YYYY-MM-DD, as explained in the Collection section of this advisory.

While Application Passcodes have non-malicious purposes, in this case instances of these passcodes with the name “ZimbraWeb” are almost certainly malicious. The ZCS webmail application can support 2FA natively and does not require the use of an Application Passcode, so there is no reason that there should be one named “ZimbraWeb.”

In instances where organizations identify victims of this campaign, they should also examine the inbox of the suspected victim for the original phishing email [D3-MA]. If an email that has a payload exploiting CVE-2025-66376 is discovered, steps should be taken immediately to identify and quarantine other instances of emails with similar body content, senders, and subject lines to prevent further exploitation and exfiltration.  

Remediation

In the event an organization identifies activity associated with this campaign, that organization should take steps to minimize further exploitation. The organization should consider requesting that employees minimize use of the ZCS webmail client until the organization updates to a patched version that is not vulnerable to CVE-2025-66376.

Organizations should use identifiers from the IOCs section of this report to identify any individuals compromised by this campaign and record the date(s) of compromise(s) to determine the scale and scope of emails exfiltrated.

All users from the organization should have all Application Passcodes and 2FA scratch keys revoked. Affected organizations should require all employees to change passwords in line with establishing minimum password strength requirements [CPG 3.B] and creating unique credentials [CPG 3.C], specifically noting that compromised employees might have had any password stored in a password manager exfiltrated.

Works cited

[1] Netherlands General Intelligence and Security Service (AIVD) and Netherlands Defence Intelligence and Security Service (MIVD). AIVD and MIVD identify a new Russian cyber threat actor. 2025. https://www.aivd.nl/site/binaries/site-content/collections/documents/2025/05/27/aivd-en-mivd-onderkennen-nieuwe-russische-cyberactor/Advisory+AIVD+en+MIVD+Public+report+on+new+cyber+actor.pdf

[2] Microsoft Corporation. New Russia-affiliated actor Void Blizzard targets critical sectors for espionage. 2025. https://www.microsoft.com/en-us/security/blog/2025/05/27/new-russia-affiliated-actor-void-blizzard-targets-critical-sectors-for-espionage/

[3] Palo Alto Networks Unit 42. Russian Global Webmail Espionage. 2026. https://unit42.paloaltonetworks.com/russian-webmail-espionage/ 

[4] Proofpoint. TA488 Targets Zimbra Mailservers with Half-Click Exploits. 2026. https://www.proofpoint.com/us/blog/threat-insight/ta488-zcs-exploit

[5] Seqrite. Operation GhostMail: Russian APT exploits Zimbra Webmail to Target Ukraine State Agency. 2026. https://www.seqrite.com/blog/operation-ghostmail-zimbra-xss-russian-apt-ukraine/  

Footnotes

¹ Národní úřad pro kybernetickou a informační bezpečnost
² Forsvarets Efterretningstjeneste
³ Välisluureamet
⁴ Sotilastiedustelu
⁵  Suojelupoliisi
⁶ Direction générale de la sécurité intérieure
⁷ Agence nationale de la sécurité des systèmes d’information
⁸ Agenzia Informazioni e Sicurezza Esterna
⁹ Agenzia Informazioni e Sicurezza Interna
¹⁰ Serviciul de Informații și Securitate al Republicii Moldova
¹¹ Agencja Wywiadu
¹² Służba Kontrwywiadu Wojskowego
¹³ Centro Nacional de Inteligencia
¹⁴ Nationellt Cybersäkerhetscenter
¹⁵ MITRE and ATT&CK are registered trademarks of The MITRE Corporation. MITRE D3FEND is a trademark of The MITRE Corporation.

Acknowledgements

The authoring agencies acknowledge the contributions to this advisory from Palo Alto Networks Unit 42 and Proofpoint.

Disclaimer of endorsement

The information and opinions contained in this document are provided "as is" and without any warranties or guarantees. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement, recommendation, or favoring by the United States Government, and this guidance shall not be used for advertising or product endorsement purposes.

Organizations have no obligation to respond or provide information back to the authoring organizations in response to this joint advisory. If, after reviewing the information provided, an organization decides to provide information to the authoring organizations, reporting must be consistent with all applicable laws and policies.

Purpose

This document was developed in furtherance of the authoring agencies’ cybersecurity missions, including their responsibilities to identify and disseminate threats, and to develop and issue cybersecurity specifications and mitigations. This information may be shared broadly to reach all appropriate stakeholders.

Contact

Appendix A: MITRE ATT&CK tactics and techniques

See Table 9 through Table 19 for all the threat actor tactics and techniques referenced in this advisory.

Appendix B: MITRE D3FEND countermeasures

See Table 20 for a mapping of several of the cybersecurity countermeasures mentioned in this advisory.

While app performance is often equated with a smooth UI and fast start times, memory serves as the silent foundation upon which these visible metrics are built. It's no secret that we're seeing a shift where device memory is more important than ever. Not only have we made strides in Android memory optimizations with Android 17, we're providing the tooling and API support to help you stay ahead of stricter memory requirements later this year.

To ensure device stability, starting in Android 17, the system will begin enforcing app memory limits based on the device's total RAM. If an app exceeds those limits, Android will kill the process with no associated stack trace.

Optimize image loading

Detect and fix memory leaks with Android Studio

Memory leaks in Android occur when your code holds onto an object's reference long after its lifecycle has ended. This prevents the Garbage Collector (GC) from reclaiming that memory, eventually leading to sluggish performance or OutOfMemoryError (OOM).

Android Studio Panda 3 features a dedicated LeakCanary profiler task, allowing developers to analyze real-time memory leaks and map traces within the IDE.

The LeakCanary profiler task in Android Studio actively moves the memory leak analysis from your device to your development machine, resulting in a significant performance boost during the leak analysis phase as compared to on-device leak analysis.

Additionally, the leak analysis is now contextualized within the IDE and fully integrated with your source code, providing features like go to declaration and other helpful code connections that drastically reduce the friction and time required to investigate and fix memory leaks.

Trim memory when app leaves visible state

Android can reclaim memory from your app or stop your app entirely if necessary to free up memory for critical tasks, as explained in Overview of memory management. Android will usually reclaim memory from your app when it’s not visible to the user, such as by discarding some of your app’s code and data pages in memory or compressing your heap allocations. When the user resumes your app and your app tries to access some memory that’s been reclaimed, the OS will swap that memory back in on demand. This swapping behavior can be slow, and cause unexpected jank or stutters in your app.

If you leave it to the OS to decide what memory to reclaim from your app, you may find that the OS reclaimed memory that you’ll need shortly after resuming your app. Instead, your app can voluntarily discard memory allocations that it can regenerate later, on demand and at a low cost. To do so, you can implement the ComponentCallbacks2 interface. You can implement onTrimMemory in your Activity, Fragment, Service, or even your custom Application class. Using it in the Application class is highly effective for global cache management.

The provided onTrimMemory() callback method notifies your app of lifecycle or memory-related events that present a good opportunity for your app to voluntarily reduce its memory usage.

In terms of memory lifecycle management, your implementation should focus exclusively on TRIM_MEMORY_UI_HIDDEN and TRIM_MEMORY_BACKGROUND. Since Android 14, the system has ceased delivering notifications for other legacy constants, which were formally deprecated in Android 15.

TRIM_MEMORY_UI_HIDDEN: This signal indicates that your application's UI has transitioned out of the user's view. This provides an opportunity to release substantial memory allocations tied strictly to the interface—such as Bitmaps, video playback buffers, or complex animation resources.

TRIM_MEMORY_BACKGROUND: At this level, your process is residing in the background and is now a candidate for termination to satisfy the system's global memory needs. To extend the duration your process remains in the cached state, and reduce the number of app cold starts, you should aggressively release any resources that can be easily reconstructed once the user resumes their session.

import android.content.ComponentCallbacks2
// Other import statements.

class MainActivity : AppCompatActivity(), ComponentCallbacks2 {

    /**
     * Release memory when the UI becomes hidden or when system resources become low.
     * @param level the memory-related event that is raised.
     */
    override fun onTrimMemory(level: Int) {

        if (level >= ComponentCallbacks2.TRIM_MEMORY_UI_HIDDEN) {
            // Release memory related to UI elements, such as bitmap caches.
        }

        if (level >= ComponentCallbacks2.TRIM_MEMORY_BACKGROUND) {
            // Release memory related to background processing, such as by
            // closing a database connection.
        }
    }
}

Note: The onTrimMemory integration may depend on SDK support. For instance, certain games rely on their game engine to enable this capability. Please check out the game memory optimization documents.

Advanced memory observability with ProfilingManager

To catch and diagnose memory issues in the field that cannot be reproduced locally, you should leverage the ProfilingManager API. Introduced in Android 15, this advanced observability API allows you to programmatically collect real-user Perfetto profiles.

For teams that lack a dedicated infrastructure to manage and host performance artifacts, Crashlytics is exploring a specialized solution to streamline this workflow. They are inviting developers to provide feedback.

Android 17 introduces new event-driven triggers, most notably TRIGGER_TYPE_OOM and TRIGGER_TYPE_ANOMALY:

• The OOM trigger automatically collects a Java heap dump at the exact moment an OutOfMemoryError crash occurs, providing precise allocation states. A collected OOM profile is provided the next time the app starts and registers the registerForAllProfilingResults callback.
• The Anomaly trigger detects severe performance issues, such as excessive binder spam or breached memory thresholds. The memory anomaly delivers a heap dump just prior to the system terminating the app.

  val profilingManager = 
applicationContext.getSystemService(ProfilingManager::class.java)
    val triggers = ArrayList()  


    triggers.add(ProfilingTrigger.Builder(
                 ProfilingTrigger.TRIGGER_TYPE_ANOMALY))
    val mainExecutor: Executor = Executors.newSingleThreadExecutor()
    val resultCallback = Consumer { profilingResult ->
        if (profilingResult.errorCode != ProfilingResult.ERROR_NONE) {
            // upload profile result to server for further analysis          
            setupProfileUploadWorker(profilingResult.resultFilePath)
        } 

    profilingManager.registerForAllProfilingResults(mainExecutor, resultCallback)
    profilingManager.addProfilingTriggers(triggers)

Once you’ve collected the heap dump, you can download the profile from the server, or locally via adb pull and drag and drop the file into the Perfetto UI. To streamline your memory debugging workflow, use the Heap Dump Explorer, this is the new default view for heap dumps in Perfetto UI. This tool provides an intuitive interface for inspecting Java heap dumps, allowing you to visualize object allocation hierarchies, compute retained memory sizes, and identify the shortest path from garbage collection root. By leveraging the Heap Dump Explorer, you can rapidly pinpoint memory leaks, bloated retained objects such as excessive bitmap allocations, and analyze heap object allocations all in one place.

Conclusion

Optimizing bytecode with R8, adopting image loading best practices, and resolving memory leaks are critical steps toward delivering a high-quality user experience while managing resources effectively under pressure. Adopting these proactive measures helps maintain app stability and performance, preventing unexpected terminations while safeguarding user context. To further your performance expertise, explore our revised memory guidance.

Posted by Alice Yuan, Developer Relations Engineer at Google, Arti Arutiunov, Product Manager at Datadog and Nikita Ogorodnikov, Staff Software Engineer at Datadog

Performance regressions are notoriously hard to reproduce, making regressions a massive bottleneck for mobile developers. Although signals like ANR rates indicate what issues occur in production, pinpointing the specific line of code that resulted in the performance issue has historically necessitated exhaustive manual reproduction or speculative trial-and-error experimentation.

Datadog collaborated with Google to mitigate this frustration by integrating the ProfilingManager API (available on Android 15+ devices) into its Real User Monitoring (RUM) and Continuous Profiling platforms. This integration transforms the debugging workflow, allowing developers to move beyond surface-level symptoms to being able to detect the why behind a performance bottleneck.

The impact of ProfilingManager

ProfilingManager is a system service introduced in Android 15 that enables apps to programmatically collect performance data such as call stack samples, field traces and memory heap dumps directly from production environments. This capability shifts the engineering paradigm from reactive manual reproduction to proactive field analysis.

Solving the Android code-level visibility challenge

Prior to the implementation of ProfilingManager, Datadog’s Real User Monitoring (RUM) focused on high-level application health and session-level telemetry to assess the user journey. Engineering teams could monitor Android performance signals like time to initial display, ANR rates, CPU load, and frozen frames. These insights extended to granular interactions, such as network latency, touch events, and main thread hangs. However, while this data effectively highlighted which performance bottlenecks were surfacing in the field, it provided no clear path to identifying the root cause of these failures.

To address this, Datadog needed a profiling engine capable of capturing Android traces directly from devices in production with minimal performance impact. After evaluating alternative approaches, such as writing their own trace processor using Android Debug APIs, the team selected ProfilingManager because it is the most performant solution of the profiling options they evaluated and offloads the sampling decisions overhead to the OS.

ProfilingManager supports a wide range of collection methods, including CPU traces, call stack sampling, memory analysis through Java heap dumps and native heap profiles. It enables developers to profile production builds, upload trace files to external storage, and review them in the Perfetto trace analyzer UI. As a SaaS provider, Datadog uploads, visualizes, and analyzes these profiles collected via its SDK, providing a unified view of application health.

• Granular session diagnostics: ProfilingManager enhances debuggability by delivering direct OS-level trace data, overcoming the visibility and alignment challenges typical of custom logging with system services. To dive deeper, developers can download these traces from Datadog to investigate further in visualization tools like the Perfetto UI.
• Automated telemetry triggers: By leveraging native system events to initiate trace recordings at key optimization points, Datadog reduces the need to build custom collection logic. While the initial rollout focuses on the APP_FULLY_DRAWN signal, there are already plans to expand this observability to include ANR, OOM, and COLD_START triggers.
• Proactive trace snapshots: By interfacing directly with the system-level Perfetto service (traced), ProfilingManager utilizes a proactive background recording model designed to capture unpredictable issues. This ensures that developers receive a precise visualization of the events leading up to a performance anomaly, offering a level of insight that exceeds what is possible through manual instrumentation.
• Bottleneck detection at scale: Datadog is able to synthesize telemetry from across Datadog’s global customer base to uncover regressions that only emerge under unique hardware configurations and variable network environments.
• System-enforced resource stability: The API leverages sampling trace collection to ensure performance and user experience impacts remain unnoticeable.
• On-device data controls: ProfilingManager filters out irrelevant information from other processes on-device before the profile is delivered to the app. This minimizes file sizes and ensures that only data relevant to the app's processes is provided.

Processing millions of weekly profiles to optimize real-world apps

Conclusion

By integrating Android’s ProfilingManager API, Datadog successfully closed the visibility gap between backend systems and mobile client applications for their customers. By processing millions of profiles weekly with negligible device overhead, Datadog equips Android developers with the code-level insights necessary to diagnose complex performance bugs instantly, helping developers build smoother applications and improve their app’s performance signals in the Play Store. To adopt the ProfilingManager API directly into your performance observability framework, check out our documentation.

In the future, Datadog aims to make Android profiling data a first-class input for coding agents to autonomously resolve performance bottlenecks, closing the feedback loop between detection and remediation. Datadog is working toward making Android profiling broadly accessible to developers.

To get started using the Datadog real user monitoring feature powered by ProfilingManager, visit Datadog Mobile Real User Monitoring.

Posted by Ben Weiss, Senior Developer Relations Engineer, Android Developer Relations

Welcome back to the blog post series "Build intelligent Android apps" where we take a basic Android app and transform it into a personalized, intelligent, and agentic experience. In our previous post, we explored how to leverage Firebase AI Logic to build cloud-hosted and hybrid AI features.

In this article, we'll show you how we designed and integrated these capabilities into our travel planning app, JetPacker, using Android AppFunctions. We'll explore the rationale behind our feature choices, discuss the specialized tooling we used to accelerate development, and dive into the code that makes it all work.

Designing AI-ready features: making choices that matter for your users

To select which features to provide to the intelligence system, we looked for tasks where a voice or text command is objectively faster than tapping through screens. In this side-by-side screen recording you can see this contrast perfectly: on the left, a user tapping through multiple screens to log an expense; on the right, the same task completed instantly in the background via a privileged agent.

Our first choice was expense tracking. Logging a coffee expense during a trip usually takes quite a few taps—unlocking the phone, opening the app, finding the active trip, navigating to the expenses tab, tapping the add button, taking a picture of the receipt, and checking the result. By providing the addExpense and getExpenses features as AppFunctions, the system agent handles the heavy lifting. When the user says, "Add a five-dollar coffee expense to my Paris trip," the agent automatically searches for the correct trip ID in the background and inserts the expense, skipping the manual UI flow entirely.

We also prioritized itinerary management. Finding what activity is next on a busy trip itinerary usually requires scrolling through a dense timeline view. By providing getItinerary and addItineraryEvent to the system, the user can simply ask, "What am I doing next in Paris?" and get an immediate answer.

Finally, we focused on hands-free note capturing. Typing out reminders or notes while walking down a busy street is difficult and unsafe. Exposing a voice note capability allows the user to say, "The flight was amazing, I saw a beautiful sunset and managed to sleep well," and the privileged agent automatically transcribes and saves it directly into the travel database  using the addVoiceNote AppFunction.

Android MCP powered by AppFunctions

This entire experience is built on Android MCP. Under this design, the app acts as a local MCP server. Rather than remote APIs, you provide your app features directly to the on-device intelligence system.

Android AppFunctions is the API that brings this concept to life. It reads annotated Kotlin functions and compiles them into type-safe, sandboxed tool definitions that the privileged agent can discover and invoke locally on the device.

Diagram highlighting our apps, the android platform, and system agents coordinate AppFunctions.

Under the Android MCP model, your app acts as a local MCP server that exposes structured tools, while the Android platform serves as the central tool registry. On the MCP client side, agent apps are registered with the intelligence system after being granted system-privileged permissions to access the registry.

When a user interacts with a registered agent, its LLM determines if the request can be handled by an AppFunction, queries the platform's metadata, and executes the appropriate registered functions in the background. This local MCP client-server design gives you full control: you choose exactly which features are accessible to the agent, keeping the rest of your app's data private.

How we accelerated development with Android skills

To streamline the integration process, we leveraged the AppFunctions development skill. The AppFunctions development skill is a complete development companion. It guided us through the entire lifecycle: mapping Kotlin data classes to serialize parameters, generating the necessary Service entry points, refining our KDoc documentation to ensure the LLM understands parameter boundaries, and setting up automated testing using ADB.

Providing app features to the intelligence system

Enough with the theory, let's dive into the implementation.

Configuration and dependency setup

We begin by adding the AppFunctions dependencies. One for the API and one for the Kotlin Symbol Processing compiler.

implementation("androidx.appfunctions:appfunctions:1.0.0-alpha10")
ksp("androidx.appfunctions:appfunctions-compiler:1.0.0-alpha10")

Modeling custom data types

Any custom object exchanged with the agent must be annotated with @AppFunctionSerializable. In our TripSerializable.kt file, we define our trip data model:

@AppFunctionSerializable(isDescribedByKDoc = true)
data class TripSerializable(
    /** The trip's unique identifier. */
    val id: String,
    /** The trip's title. */
    val title: String,
    /** The trip's destination location. */
    val location: String,
    /** The trip's start date in milliseconds. */
    val startDate: Long,
    /** The trip's end date in milliseconds. */
    val endDate: Long,
    /** A list of participants. */
    val participants: List<String>,
)

Providing features using the @AppFunction annotation

Next, the skill wrote the Kotlin functions that perform the database queries and annotate them with @AppFunction. We can view this in searchTrip:

/**
 * Looks for trips based on optional filters like id, title (name), location, and dates.
 *
 * @param id The unique identifier of the trip.
 * @param title The title or name of the trip.
 * @param location The destination location.
 * @param startDate The minimum start date in milliseconds.
 * @param endDate The maximum end date in milliseconds.
 * @return A list of trips matching the filters.
 */
@AppFunction(isDescribedByKDoc = true)
suspend fun searchTrip(
    id: String? = null,
    title: String? = null,
    location: String? = null,
    startDate: Long? = null,
    endDate: Long? = null
): List<TripSerializable> {
    return withContext(Dispatchers.IO) {
    // implementation
}

Since AppFunctions run on the UI thread by default, we use withContext(Dispatchers.IO) to switch to a background dispatcher. Additionally, we refine our KDoc to use clear, imperative verbs and specify parameter constraints. This documentation compiles directly into the tool's schema, which the privileged agent uses to resolve parameters and handle runtime errors.

The service entry point and Hilt integration

To register these features with the intelligence system, we create an abstract base class that extends AppFunctionService. We annotate it with @AppFunctionServiceEntryPoint:

@RequiresApi(36)
@AndroidEntryPoint
@AppFunctionServiceEntryPoint(
    serviceName = "JetPackerAppFunctionService",
    appFunctionXmlFileName = "jetpacker_app_function_service"
)
abstract class BaseJetPackerAppFunctionService : AppFunctionService() {
    @Inject internal lateinit var tripDao: TripDao
    // DAOs and database references are injected here...
}

During compilation, KSP generates the final concrete service subclass, JetPackerAppFunctionService, as declared with the serviceName parameter. We also register app_metadata.xml in the app's manifest. This file provides global operational rules for JetPacker's declared AppFunctions.

Testing and verifying your AppFunctions

Once implemented, you should verify that your AppFunctions are registered and working correctly.

Running devices or emulators with Android 17 or newer, you can use ADB commands from your terminal to list and invoke your functions. Running adb shell cmd app_function list-app-functions displays all registered functions for your package. You can then execute a specific function and test its database integration by running adb shell cmd app_function execute-app-function while passing a raw JSON parameters string.

Instead of these ADB commands, you can also use the AppFunctions Testing Agent to inspect your configuration, list and execute AppFunctions, and even see how your AppFunctions behave in a real conversational flow.

Wrapping it up

When thinking about app features that can be contributed to the intelligence system using AppFunctions requires a slight shift in how we think about code and documentation. AppFunctions enable you to use this new interaction model for apps, which allows using an agent to access app features..

First, the AppFunctions development skill is an essential lifecycle tool, helping you discover features, implement and refine AppFunctions for your apps. Second, KDoc comments are a compiled API asset; clear parameter descriptions directly impact the execution accuracy of the system agent. Finally, Android MCP provides local-first execution allowing apps to safely collaborate with AI agents.

Contributing app features through AppFunctions makes your application ready for the intelligence system. Let us know how you are adapting your apps for the agentic era!

Learn more

Check out the other parts of this blog post series:
Part 1: Introduction of the app and a high-level overview.
Part 2: On-device intelligence. Deep-dive into ML Kit’s GenAI APIs and Gemini Nano to build privacy-first features like itinerary summarization, receipt parsing, and local audio processing.
Part 3: Hybrid and cloud reasoning. Explore how to use Firebase AI Logic to ground LLM answers in real-world data like Google Maps and web context.
Part 4 (this post!): System integration. Integrating with the Android intelligence system using AppFunctions.
Part 5 (coming soon): In-app agentic workflows. Extend the app with an end-to-end booking assistant powered by A2UI and ADK.

Interested in more on Android Development? Follow Android Developers on YouTube or LinkedIn!

All code snippets in this blog post follow the following copyright notice:

Copyright 2026 Google LLC.
SPDX-License-Identifier: Apache-2.0

Read more of this story at Slashdot.

Note: This joint Cybersecurity Advisory is being published as an addition to the Cybersecurity and Infrastructure Security Agency (CISA) May 6, 2025, joint fact sheet Primary Mitigations to Reduce Cyber Threats to Operational Technology and European Cybercrime Centre’s (EC3) Operation Eastwood, in which CISA, Federal Bureau of Investigation (FBI), Department of Energy (DOE), Environmental Protection Agency (EPA), and EC3 shared information about cyber incidents affecting the operational technology (OT) and industrial control systems (ICS) of critical infrastructure entities in the United States and globally.

FBI, CISA, National Security Agency (NSA), and the following partners—hereafter referred to as “the authoring organizations”—are releasing this joint advisory on the targeting of critical infrastructure by pro-Russia hacktivists:

• U.S. Department of Energy (DOE)
• U.S. Environmental Protection Agency (EPA)
• U.S. Department of Defense Cyber Crime Center (DC3)
• Europol European Cybercrime Centre (EC3)
• EUROJUST – European Union Agency for Criminal Justice Cooperation
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Canadian Centre for Cyber Security (Cyber Centre)
• Canadian Security Intelligence Service (CSIS)
• Czech Republic Military Intelligence (VZ)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)
• Czech Republic National Centre Against Terrorism, Extremism, and Cyber Crime (NCTEKK)
• French National Cybercrime Unit – Gendarmerie Nationale (UNC)
• French National Jurisdiction for the Fight Against Organized Crime (JUNALCO)
• German Federal Office for Information Security (BSI)
• Italian State Police (PS)
• Latvian State Police (VP)
• Lithuanian Criminal Police Bureau (LKPB)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• Romanian National Police (PR)
• Spanish Civil Guard (GC)
• Spanish National Police (CNP)
• Swedish Polisen (SC3)
• United Kingdom National Cyber Security Centre (NCSC-UK)

The authoring organizations assess pro-Russia hacktivist groups are conducting less sophisticated, lower-impact attacks against critical infrastructure entities, compared to advanced persistent threat (APT) groups. These attacks use minimally secured, internet-facing virtual network computing (VNC) connections to infiltrate (or gain access to) OT control devices within critical infrastructure systems. Pro-Russia hacktivist groups—Cyber Army of Russia Reborn (CARR), Z-Pentest, NoName057(16), Sector16, and affiliated groups—are capitalizing on the widespread prevalence of accessible VNC devices to execute attacks against critical infrastructure entities, resulting in varying degrees of impact, including physical damage. Targeted sectors include Water and Wastewater Systems, Food and Agriculture, and Energy.

The authoring organizations encourage critical infrastructure organizations to implement the recommendations in the Mitigations section of this advisory to reduce the likelihood and impact of pro-Russia hacktivist-related incidents. For additional information on Russian state-sponsored malicious cyber activity, see CISA’s Russia Threat Overview and Advisories webpage.

Download the PDF version of this report:

Background and Development of Pro-Russia Hacktivist Groups

Over the past several years, the authoring organizations have observed pro-Russia hacktivist groups conducting cyber operations against numerous organizations and critical infrastructure sectors worldwide. The escalation of the Russia-Ukraine conflict in 2022 significantly increased the number of these pro-Russia groups. Consisting of individuals who support Russia’s agenda but lack direct governmental ties, most of these groups target Ukrainian and allied infrastructure. However, among the increasing number of groups, some appear to have associations with the Russian state through direct or indirect support.

Cyber Army of Russia Reborn

The authoring organizations assess that the Russian General Staff Main Intelligence Directorate (GRU) Main Center for Special Technologies (GTsST) military unit 74455—tracked in the cybersecurity community under several names (see Appendix B: Additional Designators Used for Cited Groups)—is likely responsible for supporting the creation of CARR —also known as “The People’s Cyber Army of Russia”—in late February or early March of 2022. Actors suspected to be from GRU unit 74455 likely funded the tools CARR threat actors used to conduct distributed denial-of-service (DDoS) attacks through at least September 2024.

In April 2022, the group began using a new Telegram channel featuring the name “CyberArmyofRussia_Reborn” to organize and plan group actions. The channel creators recruited actors to use CARR as an unattributable platform for conducting cyber activities beneath the level of an APT, aimed at deterring anti-Russia rhetoric. CARR threat actors presented themselves as a group of pro-Russia hacktivists supporting Russia’s stance on the Ukrainian conflict, and they soon began claiming responsibility for DDoS attacks against the U.S. and Europe for supporting Ukraine.

CARR documented these actions through embellished images and videos shared on their social media channels, promoting Russian ideology, disseminating talking points, and publicizing leaked information from hacks attributed to Russian state threat actors.

In late 2023, CARR expanded their operations to include attacks on industrial control systems (ICS), claiming an intrusion against a European wastewater treatment facility in October 2023. In November 2023, CARR targeted human-machine interface (HMI) devices, claiming intrusions at two U.S. dairy farms.

The authoring organizations assess that by late September 2024, CARR channel administrators became dissatisfied with the level of support and funding provided by the GRU. This dissatisfaction led CARR administrators and an administrator from another hacktivist group, NoName057(16), to create the Z-Pentest group, employing the same tactics, techniques, and procedures (TTPs) as CARR but separate from GRU involvement.

NoName057(16)

The authoring organizations assess that the Center for the Study and Network Monitoring of the Youth Environment (CISM), established on behalf of the Kremlin, created NoName057(16) as a covert project within the organization. Senior executives and employees within CISM developed and customized the NoName057(16) proprietary DDoS tool DDoSia, paid for the group’s network infrastructure, served as administrators on NoName057(16) Telegram channels, and selected DDoS targets.

Active since March 2022, NoName057(16) has conducted frequent DDoS attacks against government and private sector entities in North Atlantic Treaty Organization (NATO) member states and other European countries perceived as hostile to Russian geopolitical interests. The group operates primarily through Telegram channels and used GitHub, alongside various websites and repositories, to host DDoSia and share materials and TTPs with their followers. 

In 2024, NoName057(16) began collaborating closely with other pro-Russia hacktivist groups, operating a joint chat with CARR by mid-2024. In July 2024, NoName057(16) jointly claimed responsibility with CARR for an alleged intrusion against OT assets in the U.S. The high degree of cooperation with CARR likely contributed to the formation of Z-Pentest, which is composed of actors and administrators from both teams, in September 2024.

Z-Pentest

Established in September 2024, Z-Pentest is composed of members from CARR and NoName057(16). The group specializes in OT intrusion operations targeting globally dispersed critical infrastructure entities. Additionally, the group uses “hack and leak” operations and defacement attacks to draw attention to their pro-Russia messaging. Unlike other pro-Russia hacktivist groups, Z-Pentest largely avoids DDoS activities, claiming OT intrusions as attempts to garner more attention from the media.

Shortly after Z-Pentest’s inception, the group announced alliances with CARR and NoName057(16), possibly to leverage the other groups’ subscribers to grow the new channel. In March 2025, Z-Pentest posted evidence claiming OT device intrusions to their channel using a NoName057(16) cyberattack campaign hashtag. Similarly, in April 2025, Z-Pentest shared a video purporting defacement of an HMI by changing system names to NoName057(16) and CARR references. Z-Pentest continues to create new alliances with other groups, like Sector16, to continue growing their subscriber base and incidentally propagate TTPs with new partners.

Sector16

Formed in January 2025, Sector16 is a novice pro-Russia hacktivist group that emerged through collaboration with Z-Pentest. Sector16 actively maintains an online presence, including a public Telegram channel where they share videos, statements, and claims of compromising U.S. energy infrastructure. These communications often align with pro-Russia narratives and reflect their self-proclaimed support for Russian geopolitical objectives.

Members of Sector16 may have received indirect support from the Russian government in exchange for conducting specific cyber operations that further Russian strategic goals. This aligns with broader Russian cyber strategies that involve leveraging non-state threat actors for certain cyber activities, adding a layer of deniability.

Technical Details

Note: This advisory uses the MITRE ATT&CK^® Matrix for Enterprise framework, version 18. See the MITRE ATT&CK Tactics and Techniques section of this advisory for a table of the threat actors’ activity mapped to MITRE ATT&CK tactics and techniques.

TTP Overview

Pro-Russia hacktivist groups employ easily disseminated and replicated TTPs across various entities, increasing the likelihood of widespread adoption and escalating the frequency of intrusions. These groups have limited capabilities, frequently misunderstanding the processes they aim to disrupt. Their apparent low level of technical knowledge results in haphazard attacks where actors intend to cause physical damage but cannot accurately anticipate actual impact. Despite these limitations, the authoring organizations have observed these groups willfully cause actual harm to vulnerable critical infrastructure.

Pro-Russia hacktivist groups use the TTPs in this Cybersecurity Advisory to target virtual network computing (VNC)-connected HMI devices. These groups are primarily seeking notoriety with their actions. While they have caused damage in some instances, they regularly make false or exaggerated claims about their attacks on critical infrastructure to garner more attention. They frequently misrepresent their capabilities and the impacts of their actions, portraying minor incursions as significant breaches, but such incursions can still lead to lost time and resources for operators remediating systems.

Additionally, pro-Russia hacktivists use an opportunistic targeting methodology. They leverage superficial criteria, such as victim availability and existing vulnerabilities, rather than focusing on strategically significant entities. Their lack of strategic focus can lead to a broad array of targets, ranging from water treatment facilities to oil well systems. Pro-Russia hacktivists have demonstrated a pattern of frequently taking advantage of the widespread availability of vulnerable VNC connections. While system owners typically use VNC connections for legitimate remote system access functions, threat actors can maliciously use these connections to broadly target numerous platforms and services. Consequently, these groups can indiscriminately compromise critical infrastructure entities, including those in the Water and Wastewater, Food and Agriculture, and Energy Sectors.

Pro-Russia hacktivist groups have successfully targeted supervisory control and data acquisition (SCADA) networks using basic methods, and in some cases, performed simultaneous DDoS attacks against targeted networks to facilitate SCADA intrusions. As recently as April 2025, threat actors used the following unsophisticated TTPs to access networks and conduct SCADA intrusions:

• Scan for vulnerable devices on the internet [T0883] with open VNC ports [T1595.002].
• Initiate temporary virtual private server (VPS) [T1583.003] to execute password brute force software.
• Use VNC software to access hosts [T1021.005].
• Confirm connection to the vulnerable device [T0886].
• Brute force the password, if required [T1110.003].
• Gain access to HMI devices [T0883], typically with default [T0812], weak, or no passwords [T0859].
• Log the confirmed vulnerable device IP address, port, and password.
• Using the HMI graphical interface [T0823], capture screen recordings or intermittent screenshots while conducting the following actions, intending to affect productivity and cause additional costs [T0828]:
  • Modify usernames/passwords [T0892];
  • Modify parameters [T0836];
  • Modify device name [T0892];
  • Modify instrument settings [T0831];
  • Disable alarms [T0878];
  • Create loss of view (a technique that mandates local hands-on operator intervention) [T0829]; and/or
  • Device restart or shutdown [T0816].
• Disconnect from the device, ending the VNC connection.
• Research the compromised device company after the intrusion [T1591].

Propagation

To reach a wider audience, pro-Russia hacktivist groups work together, amplify each other’s posts, create additional groups to amplify their own posts, and likely share TTPs. For example, Z-Pentest jointly claimed intrusion of a U.S. system with Sector16. Sector16 later began posting additional intrusions for which the group claimed sole responsibility. It is likely that these and similar groups will continue to iterate and share these methods to disrupt critical infrastructure organizations.

Reconnaissance and Initial Access

The threat actors’ intrusion methodology is relatively unsophisticated, inexpensive to execute, and easy to replicate. These pro-Russia hacktivist groups abuse popular internet-scraping tools, such as Nmap or OPENVAS, to search for visible VNC services and use brute force password spraying tools to access devices via known default or otherwise weak credentials. Threat actors typically search for these services on the default port 5900 or other nearby ports (5901-5910). Their goal is to gain remote access to HMI devices connected to live control networks.

Once threat actors obtain access, they manipulate available settings from the graphical user interface (GUI) on the HMI devices, such as arbitrary physical parameter and setpoint changes, or conduct defacement activities. Because pro-Russia hacktivist groups seem to lack sector-specific expertise or cyber-physical engineering knowledge, they currently cannot reliably estimate the true impact of their actions. Regardless of outcome, pro-Russia hacktivist groups often post images and screen recordings to their social media platforms, boasting the compromises and exaggerating impacts to garner attention from their peers and the media.

Impact

While pro-Russia hacktivist groups currently demonstrate limited ability to consistently cause significant impact, there is a risk that their continued attacks will result in further harm or grievous physical consequences. Attacks have not yet caused injury; however, the attacks against occupied factories and community facilities demonstrate a lack of consideration for human safety.

Victim organizations reported that the most common operational impact caused by these threat actors is a temporary loss of view, necessitating manual intervention to manage processes. However, any modifications to programmatic and systematic procedures can result in damage or disruption, including substantial labor costs from hiring a programmable logic controller programmer to restore operations, costs associated with operational downtime, and potential costs for network remediation.

MITRE ATT&CK Tactics and Techniques

See Table 1 to Table 10 for all referenced threat actor tactics and techniques in this advisory. For assistance with mapping malicious cyber activity to the MITRE ATT&CK framework, see CISA and MITRE ATT&CK’s Best Practices for MITRE ATT&CK Mapping and CISA’s Decider Tool.

Incident Response

If organizations find exposed systems with weak or default passwords, they should assume threat actors compromised the system and begin the following incident response protocols:

1. Determine which hosts were compromised and isolate them by quarantining or taking them offline.
2. Initiate threat hunting activities to scope the intrusion. Collect and review artifacts, such as running processes/services, unusual authentications, and recent network connections.
3. Reimage compromised hosts.
4. Provision new account credentials.
5. Report the compromise to CISA, FBI, and/or NSA. See the Contact Information section of this advisory.
6. Harden the network to prevent additional malicious activity. See the Mitigations section of this advisory for guidance.

Mitigations

OT Asset Owners and Operators

The authoring organizations recommend organizations implement the mitigations below to improve your organization’s cybersecurity posture based on the threat actors’ activity. These mitigations align with the Cross-Sector Cybersecurity Performance Goals (CPGs) developed by CISA and the National Institute of Standards and Technology (NIST). The CPGs provide a minimum set of practices and protections that CISA and NIST recommend all organizations implement. CISA and NIST based the CPGs on existing cybersecurity frameworks and guidance to protect against the most common and impactful threats, tactics, techniques, and procedures. Visit CISA’s CPGs webpage for more information on the CPGs, including additional recommended baseline protections.

• Reduce exposure of OT assets to the public-facing internet. When connected to the internet, OT devices are easy targets for malicious cyber threat actors. Many devices can be found by searching for open ports on public IP ranges with search engine tools to target victims with OT components [CPG 3.S].
  • Asset owners should use attack surface management services and web-based search platforms to scan the internet. This mitigation can help identify if there are VNC systems exposed within the IP ranges they own, especially for connections set up by third parties.
    Note: For more information on attack surface management, see CISA’s Internet Exposure Reduction Guidance, CISA’s Cyber Hygiene Services for U.S. critical infrastructure, and NSA’s Attack Surface Management for the U.S. Defense Industrial Base.
  • Implement network segmentation between IT and OT networks. Segmenting critical systems and introducing a demilitarized zone (DMZ) for passing control data to enterprise logistics reduces the potential impact of cyber threats and the risk of disruptions to essential OT operations [CPG 3.I].
  • Consider implementing a firewall and/or virtual private network if exposure to the internet is necessary for controlling access to devices.
    • Consider disabling public exposure by default and implementing time-limited remote access to reduce the amount of time systems are exposed.
    • Restrict and monitor both inbound and outbound traffic at OT perimeter firewalls. Configure OT perimeter firewalls to enforce a default-deny policy for all traffic. Asset owners should explicitly permit authorized destinations and protocols based on operational requirements.
    • Implement strict egress filtering to prevent unauthorized data exfiltration or command-and-control callbacks.
    • Regularly audit firewall rulesets and monitor outbound traffic patterns for anomalies indicative of threat actor activity, such as beaconing or unexpected protocol usage.
• Adopt mature asset management processes, including mapping data flows and access points. Generating a complete picture of both OT and IT assets provides visibility to operators and management, allowing organizations to monitor and assess deviations for criticality [CPG 2.A].
  • Keep remote access services updated with the latest version available and ensure all systems and software are up to date with patches and necessary security updates.
    • Keep VNC systems updated with the latest version available.
  • Refer to the joint Foundations for OT Cybersecurity: Asset Inventory Guidance for Owners and Operators to help with reducing cybersecurity risk by identifying which assets within their environment should be secured and protected.
• Ensure OT assets use robust authentication procedures.
  • Many devices lack robust authentication and authorization. Devices with weak authentication are vulnerable targets to threat actors using credential theft techniques.
  • Implement MFA where possible. Where MFA is not feasible, use strong, unique passwords. Apply password standards for operator-accessible services on underlying OT assets, as well as network devices protecting those services. This is especially important for services that require internet accessibility [CPG 3.A] [CPG 3.B] [CPG 3.C] [CPG 3.F].
  • Establish an allowlist that permits only authorized device IP addresses and/or media access control addresses. The allowlist can be refined to operator working hours to further obstruct malicious threat actor activity; organizations are encouraged to establish monitoring and alerting for access attempts not meeting these criteria [CPG 3.E].
  • Disable any unused authentication methods, logic, or features, such as default authentication keys and default passwords. Block all unused high ephemeral ports and monitor for attempted connections using standard protocols on non-standard ports [CPG 3.R].
  • Authenticate all access to field controllers before authorizing access to, or modification of, a device’s state, logic, program, or filesystems.
• Enable control system security features that can separate and audit view and control functions. Limiting remotely accessible or default user accounts to “view-only” removes the potential for impact without exploiting a vulnerability [CPG 3.G].
• Implement and practice business recovery/disaster recovery plans. Plans should also take into consideration redundancy, fail-safe mechanisms, islanding capabilities, backup restoration, and manual operation.
  • Include scenarios that necessitate switching to manual operations. Maintaining the capability of an organization to revert to manual controls to quickly restore operations is vital in the immediate aftermath of a cyber incident [CPG 6.A].
  • Create backups of the engineering logic, configurations, and firmware of HMIs to enable fast recovery. Organizations should routinely test backups and standby systems to ensure safe manual operations in the event of an incident [CPG 3.O].
• Collect and monitor the traffic of OT assets and networking devices. This includes unusual logins or unexpected protocols communicating over the internet, and functions of ICS management protocols that change an asset’s operating mode or modify programs.
• Review configurations for setpoint ranges or tag values to stay within safe ranges and establish alerting for deviations.
• Take a proactive approach in the procurement process by following the guidance outlined in the joint guide Secure by Demand: Priority Considerations for Operational Technology Owners and Operators when Selecting Digital Products.

OT Device Manufacturers

Although critical infrastructure organizations can take steps to mitigate risks, it is ultimately the responsibility of OT device manufacturers to build products that are secure by design. The authoring organizations urge device manufacturers to take ownership of the security outcomes of their customers in line with the joint guide Shifting the Balance of Cybersecurity Risk: Principles and Approaches for Secure by Design Software.

• Eliminate default credentials and require strong passwords. The use of default credentials is a top weakness threat actors exploit to gain access to systems.
• Mandate MFA for privileged users. Changes to engineering logic or configurations are safety-impacting events in critical infrastructure. MFA should be available for safety critical components at no additional cost.
• Practice secure by default principles. OT components were initially designed without public internet connectivity in mind. When internet connection becomes necessary, implementing additional security measures is essential to safeguard these systems. Manufacturers should recognize insecure states and promptly inform users so they can make informed risk decisions.
  • Include logging at no additional charge. Change and access control logs allow operators to track safety-impacting events in their critical infrastructure. These logs should be available for no cost and use open standard logging formats.
• Publish Software Bill of Materials (SBOMs). Vulnerabilities in underlying software libraries can affect a wide range of devices. Without an SBOM, it is nearly impossible for a critical infrastructure system owner to measure and mitigate the impact of a vulnerability on their existing systems. See CISA’s SBOM webpage for more information.

Additionally, see CISA’s Secure by Design Alert on how software manufacturers can shield web management interfaces from malicious cyber activity. By using secure by design tactics, software manufacturers can make their product lines secure “out of the box” without requiring customers to spend additional resources making configuration changes, purchasing tiered security software and logs, monitoring, and making routine updates.

For more information on secure by design, see CISA’s Secure by Design webpage.

Validate Security Controls

In addition to applying mitigations, the authoring organizations recommend exercising, testing, and validating your organization’s security program against the threat behaviors mapped to the MITRE ATT&CK Matrix for Enterprise framework in this advisory. The authoring organizations recommend testing your existing security controls inventory to assess how it performs against the ATT&CK techniques described in this advisory.

To start:

1. Select an ATT&CK technique described in this advisory (see Table 1 to Table 10).
2. Align your security technologies against the technique.
3. Test your technologies against the technique.
4. Analyze your detection and prevention technologies’ performance.
5. Repeat the process for all security technologies to obtain a set of comprehensive performance data.
6. Tune your security program, including people, processes, and technologies, based on the data generated by this process.

The authoring organizations recommend continually testing your security program, at scale, in a production environment to ensure optimal performance against the MITRE ATT&CK techniques identified in this advisory.

Resources

Entities requiring additional support for implementing any of the mitigations in this advisory should contact their regional CISA Cybersecurity Advisor for assistance. Key resources organizations should reference include:

• CISA, EPA, NSA, FBI, ASD’s ACSC, Cyber Centre, BSI, NCSC-NL, and NCSC-NZ’s Foundations for OT Cybersecurity: Asset Inventory Guidance for Owners and Operators offers best practices to assist organizations in identifying and prioritizing which assets should be secured and protected.
• CISA, FBI, NSA, EPA, DOE, USDA, FDA, MS-ISAC, Cyber Centre, and NCSC-UK’s guidance on Defending OT Operations Against Ongoing Pro-Russia Hacktivist Activity that can help organizations protect OT systems from pro-Russia hacktivist activity.
• NSA and CISA’s guidance on Control System Defense: Know the Opponent helps organizations defend OT and ICS assets against malicious cyber activity.
• CISA and EPA’s resource page on Water and Wastewater Cybersecurity to help organizations reduce risks posed by malicious cyber actors targeting water and wastewater systems.
  • For additional guidance, see CISA, EPA, and FBI’s fact sheet on Top Cyber Actions for Securing Water Systems.
• The Food and Ag-ISAC’s best practices on Food and Ag Cybersecurity: A Guide for Small & Medium Enterprises provides recommendations to help mitigate against cyber threats.
• DOE and National Association of Regulatory Utility Commissioners Cybersecurity Baselines for Electric Distribution Systems and Distributed Energy (DER) webpage provides resources for state public utility commissions and utilities, as well as DER operators and aggregators to help mitigate cybersecurity risks.

Additional resources that apply to this advisory include:

• EPA’s Cybersecurity for the Water Sector resource page provides organizations with guidance on implementing basic cyber hygiene practices.
• CISA’s Cross-Sector Cybersecurity Performance Goals enables critical infrastructure organizations to reduce the likelihood and impact of known risks and adversary techniques.
• CISA’s Require Strong Passwords webpage supports small and medium-sized businesses mitigating against malicious cyber activity that targets weak passwords.
• CISA, NSA, FBI, EPA, TSA, and international partners’ guidance Secure by Demand: Priority Considerations for Operational Technology Owners and Operators when Selecting Digital Products.
• DOE’s guidance on Cyber-Informed Engineering recommends considering cyber-enabled risks during the conception, design, and development phases when manufacturing physical systems.
• CISA’s Cyber Hygiene Services help enable critical infrastructure organizations to reduce their exposure to threats by taking a proactive approach to monitoring and mitigating attack vectors.
• CISA, NSA, FBI, and international partners’ guidance on Shifting the Balance of Cybersecurity Risk: Principles and Approaches for Secure by Design Software urges software manufacturers to provide customers with products that are safer and more secure.
  • See more information in these Secure by Design Alerts: How Manufacturers Can Protect Customers by Eliminating Default Passwords and How Software Manufacturers Can Shield Web Management Interfaces From Malicious Cyber Activity.

Contact Information

U.S. organizations are encouraged to report suspicious or criminal activity related to information in this advisory to CISA, FBI, and/or NSA:

• Contact CISA via CISA’s 24/7 Operations Center at contact@cisa.dhs.gov or 1-844-Say-CISA (1-844-729-2472) or your local FBI field office. When available, please include the following information regarding the incident: date, time, and location of the incident; type of activity; number of people affected; type of equipment used for the activity; the name of the submitting company or organization; and a designated point of contact.
• For NSA cybersecurity guidance inquiries, contact CybersecurityReports@nsa.gov.

Australian organizations: Visit cyber.gov.au or call 1300 292 371 (1300 CYBER 1) to report cybersecurity incidents and access alerts and advisories.

Canadian organizations: Report incidents by emailing Cyber Centre at contact@cyber.gc.ca.

New Zealand organizations: Report cyber security incidents to incidents@ncsc.govt.nz or call 04 498 7654.

United Kingdom organizations: Report a significant cyber security incident: report.ncsc.gov.uk (monitored 24 hours) or, for urgent assistance, call 03000 200 973.

Disclaimer

The information in this report is being provided “as is” for informational purposes only. The authoring organizations do not endorse any commercial entity, product, company, or service, including any entities, products, or services linked within this document. Any reference to specific commercial entities, products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply endorsement, recommendation, or favoring by FBI and co-sealers.

Acknowledgements

Schneider Electric, Nozomi Networks, Eversource Energy, Electricity Information Sharing and Analysis Center, Chevron, BP, and Dragos contributed to this advisory.

Version History

December 09, 2025: Initial version.

Appendix A: Targeting Methodologies for Pro-Russia Hacktivist Groups

For further information on targeting methodologies for pro-Russia hacktivist groups, see:

• CISA’s alert Unsophisticated Cyber Threat Actor(s) Targeting Operational Technology;
• The joint fact sheet Primary Mitigations to Reduce Cyber Threats to Operational Technology; and
• CISA’s Russia Cyber Threat webpage.

Appendix B: Additional Designators Used for Cited Groups

The cybersecurity industry and cyber actor groups often use various names to reference actor groups. While not exhaustive, the following are the most notable names used within the cybersecurity community to reference the groups in this advisory.

Note: Cybersecurity organizations have different methods of tracking and attributing cyber actors, and this may not be a 1:1 correlation to the authoring organizations’ understanding for all activity related to these groupings.

• GRU military unit 74455
  • Sandworm Team
  • Voodoo Bear
  • Seashell Blizzard
  • APT44
• Cyber Army of Russia Reborn (CARR)
  • CyberArmy of Russia
  • Народная CyberАрмия (НКА)
  • People’s CyberArmy of Russia (PCA)
  • Russian CyberArmy Team (RCAT)
• NoName057(16)
  • NoName057(16) Spain
  • NoName057(16) Italy
  • NoName057(16) France
• Z-Pentest
  • Z-Pentest Beograd
  • Z-Pentest Alliance
  • Z-Alliance

Executive summary

Russian Federal Security Service (FSB) Center 16 cyber actors continue to exploit poorly configured and vulnerable networking devices worldwide, opportunistically compromising multiple critical infrastructure sector networks. This joint Cybersecurity Advisory (CSA) builds on FBI’s Russian Government Cyber Actors Targeting Networking Devices, Critical Infrastructure Public Service Announcement of the decade-plus FSB Center 16 cyber activity by providing additional tactics, techniques, and procedures (TTPs) to enable defenders to more fully understand and counter the threat. [1] 

This CSA is being released by the following authoring and co-sealing agencies: 

• United States National Security Agency (NSA)
• United States Cybersecurity and Infrastructure Security Agency (CISA)
• United States Federal Bureau of Investigation (FBI)
• United States Department of Defense Cyber Crime Center (DC3)
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Communications Security Establishment Canada’s (CSE’s) Canadian Centre for Cyber Security (Cyber Centre)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• United Kingdom National Cyber Security Centre (NCSC-UK)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)¹ 
• Danish Defence Intelligence Service (DDIS)² 
• Estonian Foreign Intelligence Service (EFIS)³ 
• Estonian Information System Authority (RIA)⁴
• Finnish Defence Intelligence (FDI)⁵
• Finnish Security and Intelligence Service (SUPO)⁶
• French National Cybersecurity Agency (ANSSI)⁷
• Italian External Intelligence and Security Agency (AISE)⁸ 
• Italian Internal Intelligence and Security Agency (AISI)⁹
• The Military Counterintelligence Service of Poland (SKW)¹⁰ 
• Sweden National Cyber Security Centre (NCSC-SE)¹¹ 

The authoring and co-sealing agencies strongly urge device owners and network defenders to take mitigation and remediation actions against Russian government-sponsored exploitation of vulnerable routers.

Download the PDF version of this report:

• Improve Router Hygiene to Protect Against Russian State-Sponsored Targeting (PDF, 816KB)

Cybersecurity industry tracking 

The cybersecurity industry provides overlapping cyber threat intelligence, indicators of compromise (IOCs), and mitigation recommendations related to this activity. Although not all encompassing, the following list contains the most notable threat group names commonly used within the cybersecurity community related to this activity: 

• Berserk Bear 
• Energetic Bear
• Crouching Yeti 
• Dragonfly
• Ghost Blizzard
• Static Tundra

Note: Cybersecurity companies have different methods of tracking and attributing cyber actors, and this list may not provide a 1:1 correlation to the authoring agencies’ understanding for all activity related to these groupings.

Targeting details

Critical infrastructure sectors most at risk from the Russian Federal Security Service (FSB) Center 16 cyber actors’ targeting include:

• Communications,
• Defense Industrial Base,
• Energy,
• Financial Services,
• Government Services and Facilities, especially organizations at the state and local level, and
• Healthcare and Public Health.

Technical details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise¹² framework, version 19. See Appendix A for tables of the activity mapped to MITRE ATT&CK tactics and techniques. This advisory also uses MITRE DEFEND^TM version 1.4.0.

The Russian FSB Center 16 cyber actors primarily use scanning to identify poorly configured networking devices, primarily routers, for exploitation. The actors scan for Internet IP ranges with active Simple Network Management Protocol (SNMP) agents that accept common or default community strings for authentication [T1595.001, T1595.002]. These scans, run via proxies, consist of SNMP Set-Requests from a spoofed IP address [T1027] containing Object Identifiers (OIDs) that instruct the SNMP agent on poorly configured networking devices to [T1569, T1602.001, T1090]:

• Copy its configuration to a file, often called “config.bkp” or “output.txt” [T1003, T1602.002].
• Transfer the file, typically using Trivial File Transfer Protocol (TFTP), to an actor-controlled leased virtual private server (VPS) or compromised FTP server [T1583.003, T1090, T1071, T1048].

While SNMP scanning is the primary method the actors use to discover and exploit poorly configured networking devices, they occasionally exploit common vulnerabilities and exposures (CVEs) in Cisco devices, Cisco’s Smart Install (SMI) functionality, and web portals to manage network devices. The actors previously exploited at least the following CVEs [T1584.008, T1588.005, T1190, T1068]: 

• CVE-2018-0171
• CVE-2008-4128¹³

Many of these TTPs overlap with activity by other malicious cyber actors, such as Salt Typhoon. Even though this CSA focuses on Russian FSB Center 16 cyber activity, the mitigations below should detect and counter these and similar TTPs used by other actors.

Mitigation actions

The authoring agencies highly recommend network defenders implement the following mitigations to harden networks against this exploitation:

• Disable Cisco Smart Install on all devices [D3-ACH]. [2]
• Use SNMPv3 with “authPriv” configured to the most modern encryption standard that is supported by the device instead of SNMPv1 or SNMPv2 [D3-ACH]. [3]
  • Disable SNMPv1 and SNMPv2. These are legacy protocols and should no longer be needed on current devices. If they are necessary, change all community strings from defaults and only allow read-only community strings rather than read-write access.
  • SNMPv3 adds strong authentication and data encryption that are unavailable in SNMPv1 and v2. SNMPv3 replaces clear text shared passwords, known as community strings, with more securely encoded parameters, and authenticates and encrypts data [D3-MAN, D3-MENCR].
• Use strong, unique passwords for local accounts on network devices and configure credentials to be stored securely to prevent reuse of compromised passwords [D3-CH].
  • Cisco devices protect passwords in the configuration file using different hashing types. Use hashing type 8 for user credentials. Avoid using hashing type 0, 4, and 7 as they are insecure or store passwords in plaintext in the configuration file. [4]
  • Monitor for unusual credentials that do not conform to standard organizational naming conventions [D3-PM]. 
  •  Monitor for and alert on logins using local accounts. Local accounts should only be used in emergency situations when accounts supported by centralized authentication servers are unavailable. Centralized authentication to network devices should support multi-factor authentication where feasible. [3]
• Monitor and restrict access to SNMP OIDs using a Management Information Base (MIB) allow list [D3-ACH]. [5] Reference the vendor-specific MIB for the network devices and monitor OIDs for indications of reconnaissance or misconfiguration in logs or intrusion detection systems (IDS). IDS rules should be written for inbound SNMP Set-Requests that contain OIDs targeting sensitive device data [D3-PM].
  
  • Example OIDs include:
    • 1.3.6.1.4.1.9.9.96.1.1 (Cisco Config Copy)
    • 1.3.6.1.4.1.9.9.96.1.1.1.1.5 (Config Copy Server Address, value for this OID is where the configuration file is being sent to) 
• Restrict management protocols [D3-NTF].
  • Use Access Control Lists (ACLs) to only allow management protocols, such as SNMP, from management devices, preferably on an out-of-band network. [3]
  • On edge firewalls and devices deny all external communications on the following ports unless mission critical, with strict monitoring if blocking is not feasible:
    • User Datagram Protocol (UDP) port 69 (TFTP) 
    • Transmission Control Protocol (TCP) port 4786 (SMI)
    • UDP ports 161 and 162 (SNMP)
    • TCP/UDP ports 10161 and 10162 (SNMPv3)
• Update network device software and firmware images, especially to patch known vulnerabilities, and upgrade end-of-life devices to supported ones. 
  
  • Use an attack surface management service to identify and secure Internet-facing systems with weak configurations and known vulnerabilities [D3-NVA].
    • U.S.-based federal, state, local, tribal, and territorial governments and U.S. critical infrastructure organiztions should consider signing up for CISA’s no-cost Cyber Hygiene services.
    • U.S. Defense Industrial Base organizations should consider signing up for NSA’s DIB Cybersecurity Services.

Resources

United States:

• Russia Threat Overview and Advisories
• Network Infrastructure Security Guide

Canada:

• Routers cyber security best practices (ITSAP.80.019)
• Security considerations for edge devices (ITSM.80.101)
• Guidance on securely configuring network protocols (ITSP.40.062)
• Baseline security requirements for network security zones (ITSP.80.022)
• Top 10 IT security actions to protect Internet-connected networks and information (ITSM.10.089)

Works cited

[1] FBI. Russian Government Cyber Actors Targeting Networking Devices, Critical Infrastructure. Alert Number: I-082025-PSA. 2025. https://www.ic3.gov/PSA/2025/PSA250820

[2] NSA. Cisco Smart Install Protocol Misuse. 2017. https://media.defense.gov/2019/Jul/16/2002157833/-1/-1/0/CSA-CISCO-SMART-INSTALL-PROTOCOL-MISUSE.PDF

[3] NSA. Network Infrastructure Security Guide. 2023. https://media.defense.gov/2022/Jun/15/2003018261/-1/-1/0/CTR_NSA_NETWORK_INFRASTRUCTURE_SECURITY_GUIDE_20220615.PDF

[4] NSA. Cybersecurity Information Sheet Cisco Password Types: Best Practices. 2022. https://media.defense.gov/2022/Feb/17/2002940795/-1/-1/0/CSI_CISCO_PASSWORD_TYPES_BEST_PRACTICES_20220217.PDF

[5] NSA. Cybersecurity Information Sheet: Reducing the Risk of Simple Network Management Protocol (SNMP) Abuse. 2026. https://media.defense.gov/2026/Jul/09/2003959459/-1/-1/0/CSI_REDUCING_RISK_OF_SNMP_ABUSE.PDF

Footnotes

¹  Národní úřad pro kybernetickou a informační bezpečnost

²  Forsvarets Efterretningstjeneste

³ Välisluureamet

⁴ Riigi Infosüsteem Amet

⁵ Sotilastiedustelu

⁶ Suojelupoliisi

⁷ Agence nationale de la sécurité des systèmes d’information

⁸ Agenzia Informazioni e Sicurezza Esterna

⁹ Agenzia Informazioni e Sicurezza Interna

¹⁰ Służba Kontrwywiadu Wojskowego

¹¹ Nationellt Cybersäkerhetscenter

¹² MITRE and ATT&CK are registered trademarks of The MITRE Corporation. MITRE DEFEND is a trademark of the MITRE Corporation.

¹³ CVE-2008-4128 only affects end-of-life Cisco devices.

Disclaimer of Endorsement

The information and opinions contained in this document are provided "as is" and without any warranties or guarantees. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement, recommendation, or favoring by the United States Government, and this guidance shall not be used for advertising or product endorsement purposes.

Purpose

This document was developed in furtherance of the authoring agencies’ cybersecurity missions, including their responsibilities to identify and disseminate threats, and to develop and issue cybersecurity specifications and mitigations. This information may be shared broadly to reach all appropriate stakeholders.

Contact

United States organizations

• National Security Agency (NSA)
  • Cybersecurity Report Feedback: CybersecurityReports@nsa.gov 
  • Defense Industrial Base Inquiries and Cybersecurity Services: DIB_Defense@cyber.nsa.gov 
  • Media Inquiries / Press Desk: NSA Media Relations: 443-634-0721, MediaRelations@nsa.gov
• Cybersecurity and Infrastructure Security Agency (CISA) and Federal Bureau of Investigation (FBI)
  •  U.S. organizations are encouraged to report suspicious or criminal activity related to information in this advisory to CISA via the agency’s Incident Reporting System, its 24/7 Operations Center (report@cisa.gov or 888-282-0870), or your local FBI field office. When available, please include the following information regarding the incident: date, time, and location of the incident; type of activity; number of people affected; type of equipment user for the activity; the name of the submitting company or organization; and a designated point of contact. 
• United States Department of Defense Cyber Crime Center (DC3)  
  • Defense Industrial Base Inquiries and Cybersecurity Services: DC3.DCISE@us.af.mil 
  • Defense Industrial Base mandatory cyber incident reporting as required by 10 U.S. Code Sections 391 and 393 and Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012 is submitted at https://dibnet.dod.mil.
  •  Media Inquiries / Press Desk: DC3.Information@us.af.mil

Australian organizations

• Australian Signals Directorate
  • Visit cyber.gov.au or call 1300 292 371 (1300 CYBER 1) to report cybersecurity incidents and access alerts and advisories.

Canadian organizations

• The Canadian Centre for Cyber Security (Cyber Centre), part of the Communications Security Establishment, encourages Canadian organizations to report cyber incidents and to strengthen the security of their networking devices. 
  • Report an incident or suspicious activity to the Cyber Centre by email at contact@cyber.gc.ca, online via the reporting tool Report a cyber incident - Canadian Centre for Cyber Security or by phone at 1-833-CYBER-88 (1-833-292-3788).

New Zealand organizations

• New Zealand National Cyber Security Centre (NCSC-NZ): info@ncsc.govt.nz

United Kingdom organizations

• Report significant cyber security incidents to ncsc.gov.uk/report-an-incident (monitored 24/7)

Estonia organizations

• Estonian Foreign Intelligence Service (EFIS): info@valisluureamet.ee

Finnish organizations

• Finnish Security and Intelligence Service: supo.fi/en/contact

French organizations

• French organizations are encouraged to report suspicious activity or incident related information found in this advisory by contacting ANSSI/CERT-FR at: cert-fr@ssi.gouv.fr or by phone at: 3218 or +33 9 70 83 32 18.

Italian Organizations

• Italian External Intelligence and Security Agency (AISE): 
  • Visit https://www.sicurezzanazionale.gov.it/ 
• Italian Internal Intelligence and Security Agency (AISI): 
  • Visit https://www.sicurezzanazionale.gov.it/ 

Appendix A: MITRE ATT&CK tactics and techniques

See Table 1 through Table 10 for all the threat actor tactics and techniques referenced in this advisory.

Appendix B: MITRE D3FEND countermeasures

See Table 11 for a mapping of several of the cybersecurity countermeasures mentioned in this advisory.

• Maxx Crawford added a pref to hide the New Tab logo so users can opt out of branding without altering page layout or resorting to CSS overrides.
• Harshit enabled video overlay detection in Nightly 153, allowing you to use the context menu to control videos on more pages! We plan on letting this ride out in Firefox 153.
  • You can try it out on this Instagram reel in Nightly

• A note to WebExtension authors – as part of a planned deprecation announced last month, executeScript and insertCSS are now restricted from moz-extension pages starting in Firefox 152 – Bug 2015559
• Nicolas Chevobbe [:nchevobbe] added support and debugging for modern attr()(which is enabled on Nightly) (#2014751)

Friends of the Firefox team

Resolved bugs (excluding employees)

Script to find new contributors from bug list

Volunteers that fixed more than one bug

• Sam Johnson
• Sebastian Zartner [:sebo]

New contributors (🌟 = first patch)

• Immaculate Atim: Switch to using an array instead of an object string for browser.backup.enabled_on.profiles
• liz: Screenshots overlay visible on both splitview browsers
• 🌟 Rahman Mahmutović [:r_m]: Can’t change content in box model in inspector for box-sizing:border-box elements
• Takeru Mitsumori: Fix typo in ID name about-translations-swap-langauges-icon in about-translations.html
• 🌟 Freya Arbjerg [:freyacodes]: Blackboxed columns are ignored
•  tom.passarelli: tab-preview-panel emits unpaired popupshown/popuphidden events, breaking sidebar autohide

Project Updates

Add-ons / Web Extensions

Addon Manager & about:addons

• As part of the work for the Project Nova about:addons page restyling, the about:addons sidebar has been migrated to the moz-page-nav and moz-page-nav-button reusable components, improving accessibility and visual consistency with the Firefox Desktop about:settings page – Bug 1881767

WebExtensions Framework

• Implemented WebExtensions negative permissions infrastructure, providing the foundations for enterprise policy “blocked host permissions” features – Bug 1745823
• Restricted host permission changes for MV3 extensions force-installed via enterprise policy (matching similar behaviors provided by Chrome enterprise policy behaviors) – Bug 1904054
  • Thanks to Mike Kaply for the implementation of this enterprise policy enforcement feature.

WebExtension APIs

• Fixed handling of <all_urls> as an API permission in Manifest V3, ensuring the permission is correctly initialized on extension install – Bug 1758306

DevTools

• Rahman Mahmutović [:r_m] made it possible to edit width/height in the box model section of the Layout panel (#1717176)
• Sebastian Zartner [:sebo] improved toggling tools driving in-page highlighters (e.g. the Measuring) (#1262773)
• Sebastian Zartner [:sebo] added a setting to control visibility of HTML comments in the markup view (#1455294)
• Freya Arbjerg [:freyacodes] fixed an issue in script blackboxing (#2036767)
• Alexandre Poirot [:ochameau] replaced custom preference to log RDP messages with MOZ_LOG (#1622857)
• Alexandre Poirot [:ochameau] fixed retrieval of garbage collected script text content (#1758454)

WebDriver

• Sameem updated the “Take Element Screenshot” command from WebDriver Classic to crop screenshots of elements which exceed the viewport. This aligns with the specification and avoids errors when attempting to capture huge elements.
• Alexandra Borovova updated the events for new top-level browsing contexts: we will not send anymore “browsingContext.domContentLoaded” and “browsingContext.load” events for them, instead the “browsingContext.contextCreated” event will be sent when a tab is ready to be used. This is required to align with the expected per-spec behavior.
• Henrik Skupin landed a patch allowing geckodriver to gracefully shut down Firefox when geckodriver itself is terminated.
• Hiroyuki Ikezoe disabled Firefox’s “scroll axis lock” feature so WebDriver actions for wheel input devices can scroll in arbitrary directions when using pan gestures.

Lint, Docs and Workflow

• Added a rule to prevent new uses of Preferences.sys.mjs.
• The browser environment globals within ESLint have now been updated. These include Sanitizer, VideoFrame and a few other new ones.
• Temporal, and some other definitions have been added to TypeScript.

New Tab Page

• Much has happened in the last 2 weeks! Here’s a full bug list, and here are some highlights.
• Dre fixed the List widget that was creating a new list too eagerly on the New Tab Page (2033592) — prevents accidental list creation and improves the Lists UI reliability.
• Maxx Crawford fixed Weather widget small card layout issues with opt-in location options and an error message displayed, resolving card overflow and removing the spurious opt-in error so users see a compact Weather card and correct location prompts on New Tab.
• Reem Hamoui added key dates state to the Sports widget, enabling the Sports card to surface event deadlines/key-date highlights on New Tab so sports users see timely date info.
• Scott Downe added a manage widgets option to the New Tab nova widgets context menu, giving users a direct context-menu entry to open the widget management flow from any widget with Nova enabled.
• Scott Downe added a reusable Newtab widget base component to centralize lifecycle, focus/keyboard handling, DOM templates, and telemetry hooks, reducing duplication and making widget behavior more consistent; see Newtab widget base component.
• Dre converted per-widget expansion handling to a shared widget expansion handler to unify expand/collapse state management and prevent widgets from incorrectly retaining or losing expanded state; see Convert widget expansion handling to shared widget expansion.
• Nina Pypchenko [:nina-py] updated the Sports widget to populate the “follow teams” state from the /teams endpoint, so follow/unfollow toggles now reflect server-side subscriptions and reduce incorrect follow states.
• Scott Downe moved widget menu items within New Tab widgets to standardize menu ordering and action grouping, so users find Add/Remove/Configure entries in expected positions across platforms.
• Dre fixed a World Clock city search bug for the word clocks widget, restoring expected search filtering/matching so city lookups return correct results.
• Scott Downe fixed an issue where the New Tab small weather widget size change didn’t always apply by correcting the widget size update path (JS/CSS layout interactions), improving consistent rendering for small-tile weather across responsive breakpoints and platforms; see Newtab small weather widget size change doesn’t always work.
• Nina Pypchenko [:nina-py] added a group stage section to match highlights in the sports widget on New Tab so users now see stage-aware grouping and stage labels on match highlight cards, making tournament context (group vs knockout) visible while browsing highlights.
• Dre fixed the small world clock widget not expanding to large while editing clocks so users can enter edit mode and expand the widget as expected; the change wires the edit-mode resize handler to update widget size/class during edits.
• Maxx Crawford added WCW OMC message strings so World Cup widget messaging flows on New Tab now display the correct copy (localized where available) instead of falling back to missing-text behavior.
• Reem Hamoui added a “View all” button and a list view for the results tab at medium widget size so Sports widget users on medium New Tab tiles can expand results and scroll full lists without resizing the widget.
• Maxx Crawford added WCW “Watch Live” stream strings to the Sports widget strings bundle so the widget can surface a localized “Watch Live” CTA for applicable events.
• Dre restored VoiceOver reachability for Edit/Remove in World Clock on macOS so macOS VoiceOver users can now focus and activate clock Edit/Remove controls thanks to accessibility role/label and focus-order fixes.
• Maxx Crawford removed the persistent browser logo when all new-tab features (Top Sites, widgets, content feed) are disabled by adding a conditional render guard in the New Tab component, preventing an orphaned logo (2041033).
• Mike Conley added New Tab jest tests to the node tests Tier 1 CI job Run newtab jest tests as part of node tests Tier 1 job to catch regressions earlier in CI
• Irene Ni shipped multiple visual fixes for the Sports widget Sports widget – various visual fixes (spacing, truncation, icon alignment, clipping) to improve readability and layout on constrained viewports.

Picture-in-Picture

• kpatenio adjusted our YouTube site specific wrapper so that the URL bar toggle appears more reliably, especially when selecting videos from the YouTube search page.
• Thanks to Sylvestre for patching some bugs to prevent some spurious console errors!
• Niklas fixed captions on autopip videos failing to sync with the origin videos.

Performance Tools (aka Firefox Profiler)

• Firefox Profiler now has a CLI! We also added a profiler-analysis skill to the Firefox codebase. Once you capture a performance profile, you can ask Claude or an AI to analyze it by providing a link or local path. You can use it to analyze a performance regression or debug an issue if you have a profile at hand.
  • https://www.npmjs.com/package/@firefox-devtools/profiler-cli
  • You can install it with npm install -g @firefox-devtools/profiler-cli@latest

Search and Urlbar

Nova UI refresh

• Drew and Daisuke continued working on reorganizing styles and updating the urlbar for Nova.
• 2019154, 2019152, 2041501, 2040532

Suggest

• Drew landed several Suggest improvements: realtime suggestions colors, sports suggestions received World Cup tweaks, and online Suggest via OHTTP was enabled for eligible users in Firefox 153.
• 2040561, 2039753, 2035614, 2038843

Adaptive autofill

• James fixed soft-block counting to track autofill dismisses, rather than consecutive backspaces on the same autofill, and added telemetry to measure URLs reintegration after blocking.
• 2040819, 2037177

Quick actions

• Dharma created a new Firefox Labs quick action, fixed the Update action button, and re-enabled ScotchBonnet in some tests that were not updated yet.
• Caleb added Calculator support for certain unicode operators.
• 2023169, 1928635, 1923383, 2033861

Multi Context Address Bar

• Moritz continued refactoring the urlbar code: converted some of the js modules to not be system modules, fixed dynamic results templates, incorrect reuse of result rows, and keyboard shortcuts on the unified search button panel.
• 2039297, 2036095, 2039844, 2037933, 2030050

Other

• Marco, Drew and Daisuke fixed several intermittent test failures.
• 2038510, 2023908, 2011584, 1938142, 1971091

Search

• Mark removed old WebExtension-based search engines from the source tree, removed loading of search add-ons from resource://search-extensions/.
• Caleb fixed multiple documentation issues and added a test covering searches from a private window.
• 1904613, 2035878, 2037942, 2033545, 2005724

Places

• Marco removed some unnecessary database transactions, fixed the bookmarks panel folder dropdown on Windows, and resolved several intermittent test failures.
• Thanks to Sam Johnson who fixed the bookmark edit panel showing “mobile” instead of “Mobile Bookmarks”.
• 2039534, 1505800, 2008829, 2029541, 2035084

The model, available immediately on all of Anthropic's platforms, is priced at $5 per million input tokens and $25 per million output tokens, unchanged from its predecessor, Opus 4.8. It becomes the new default model on Claude Max, Anthropic's premium consumer tier, and the strongest model available on Claude Pro.

The positioning is deliberate. Anthropic is not claiming Opus 5 is its smartest model — that distinction still belongs to Fable 5, and rival systems retain an edge in certain domains. Instead, the company is making a subtler argument that may matter more to enterprise buyers: that the most economically important AI work happens in a middle band of difficulty, where near-frontier intelligence delivered efficiently and cheaply beats frontier intelligence delivered expensively.

"Opus 5 as your daily driver, the model you hand complex work to and review when it's done," an Anthropic spokesperson said in an interview with VentureBeat, describing how the company's lineup now stratifies. "Fable 5 for your most ambitious work, the days-long autonomous projects nothing could take on before... Sonnet 5 for work you run at scale, where speed and cost per call decide what ships. Haiku 4.5 for subagents and instant answers."

How Claude Opus 5 benchmark results stack up against Fable 5 and rival AI models

On paper, the results are striking. Anthropic says Opus 5 sets new state-of-the-art marks on coding and knowledge-work evaluations including Frontier-Bench and GDPval-AA. On Frontier-Bench v0.1, an agentic terminal coding benchmark, Opus 5 scores 43.3 percent — more than double Opus 4.8's 18.7 percent and well ahead of Fable 5's 33.7 percent — at a lower cost per task, according to the company. On ARC-AGI 3, an evaluation of novel problem-solving, Anthropic reports Opus 5 scored three times as high as the next best model. On OSWorld 2.0, a computer-use benchmark, the company says the model surpasses Fable 5's best result at just over a third of the cost.

The numbers come with honest caveats that are themselves notable in an industry prone to superlatives. Anthropic acknowledges Opus 5 remains behind Mythos 5, a competing model, on cybersecurity tasks and biology research, and an OpenAI-family model still leads on one agentic coding benchmark.

The more revealing caveat came from Anthropic itself, when asked where Opus 5 still falls short of Fable 5. The spokesperson's answer amounted to a candid admission about what benchmarks do and don't capture.

"The evals where Opus 5 wins are bounded tasks with a specific outcome, which is where it's strongest. What those evals don't measure is duration," the spokesperson told VentureBeat. "One way to put it: Opus 5 is the best tool for the jobs benchmarks can see, and Fable 5 is what you reach for when the job outruns the benchmark."

Fable 5, by contrast, "is for the longest, most autonomous jobs, where the model has to stay coherent across many connected steps over hours or days with dense source material," the spokesperson said, advising customers to "run both on a representative workload, one bounded task and one long-horizon job." That framing — bounded tasks versus long-horizon autonomy — may become the defining axis of model differentiation in 2026, as benchmarks saturate and the hardest remaining problems involve sustained, multi-day agentic work rather than discrete puzzles.

Why token efficiency is becoming the real battleground for enterprise AI spending

Threaded through the launch is a theme Anthropic clearly wants buyers to absorb: Opus 5 doesn't just score well, it scores well per dollar. The model ships with an adjustable "effort" setting that lets customers trade intelligence for speed and token savings, and Anthropic's charts emphasize performance at a given cost rather than peak performance alone.

Early customers echoed the point with unusual specificity. Harvey, the legal AI company, said Opus 5 achieved similar performance to Opus 4.8's maximum-reasoning mode "while generating 26% fewer tokens on average," according to Niko Grupen, its head of applied research. Richard Pham of Fundamental Research Lab said that on hard financial-modeling tasks, the model averaged nine percentage points higher accuracy "while using roughly one-third fewer turns and tool calls and 60% less time."

Wade Foster, chief executive of Zapier, said Opus 5 topped his company's AutomationBench leaderboard "without spending more tokens than prior Claude models," running a full churn-prevention workflow from start to finish. "Previous models didn't pass; Opus 5 hit 100%," he said. Scott Wu, chief executive of Cognition, the company behind the Devin coding agent, said that on FrontierCode 1.1, "Claude Opus 5 approaches Fable-level performance at half the cost," with particular strength in debugging and root-cause analysis.

The efficiency emphasis reflects commercial reality. Enterprise AI spending is no longer experimental, and inference costs — the price of actually running these models at scale — have become a board-level line item. 

Anthropic's business skews heavily toward API and enterprise usage; according to a February 2026 analysis by Contrary Research, Claude held roughly 40 percent of the enterprise large language model market by usage as of late 2025, and Claude Code alone had reached about $1 billion in annualized revenue. For a company whose customers pay by the token, a model that does more with fewer tokens is not a nice-to-have. It is the product.

Self-verifying AI agents and what they mean for the hidden costs of automation

Beyond the numbers, Anthropic is selling a behavioral story: that Opus 5 verifies its work and iterates until it succeeds. The company offered several examples from testing that read like small parables of machine stubbornness.

In one Frontier-Bench task, the model was asked to reconstruct a machine part as a 3D CAD model from a drawing it was intentionally given no way to view. Rather than fail, Anthropic says, Opus 5 wrote its own computer vision pipeline to extract the geometry from raw pixels — and did so repeatedly, while no competing model solved the task in five attempts. In another case, given a real bug in a popular open-source package manager, the model found the root cause and fixed an edge case the community's own patch had missed; a competing model patched only the symptom and declared victory. An engineer at a trading firm, the company says, used Opus 5 to build a market data feed for a new exchange in a single session and, finding no live feed to validate against, watched the model build its own test harness to check its parsing code.

Customers described similar behavior in the wild. Cristian Rivera, a staff software engineer at Stripe, said he gave the model "a chief-of-staff role over my dev environments" for a weekend: "it built its own monitor, drove each box, and pulled me in only for the judgment calls."

This is the capability enterprises actually care about, and it is worth dwelling on why. The gap between a model that produces plausible output and one that verifies its output is the gap between a demo and a deployable system. Most of the hidden cost of enterprise AI today is human review — engineers checking the machine's work. A model that reliably checks its own work compresses that cost, which is precisely why customers keep citing fewer turns, fewer passes, and less time rather than higher raw scores.

Inside Anthropic's safety strategy: capability gaps, classifiers, and model fallbacks

The launch also showcases Anthropic's increasingly intricate approach to safety — one that now involves deliberately not teaching its models certain skills. The company says its automated behavioral audit found Opus 5 to be its most aligned model to date, scoring 2.3 on overall misaligned behavior, lower than Opus 4.8, Sonnet 5, or Fable 5, with the lowest rates of deceptive behavior and the least susceptibility to being tricked into misuse.

On the capability side, Anthropic says it intentionally avoided training Opus 5 on cyber tasks, as it did with Opus 4.8. The model improved on them anyway — a side effect of general capability gains — and now nearly matches Mythos 5 at finding software vulnerabilities. But it remains far behind at exploiting them: on Anthropic's OSS-Fuzz evaluation, Opus 5 identified vulnerabilities at a 79.4 percent rate, close to Mythos 5's 80 percent, but succeeded at developing exploits in only 4 challenges versus Mythos 5's 13. That asymmetry — strong at defense-relevant discovery, weak at offense-relevant exploitation — appears to be by design, and the safeguards follow the same logic. Anthropic expects Opus 5's cyber classifiers to intervene about 85 percent less often than Fable 5's.

When a classifier does trigger, requests in Claude.ai, Claude Code, and Claude Cowork fall back to Opus 4.8 by default — raising an obvious question: if a request is too risky for one model, why is it acceptable for another? "The model it falls back to has lower capability levels making the risk of harmful use lower as well," the spokesperson said, adding that "there is a message that lets the user know when this occurs and is visible in the chat."

The logic is defensible, but it reveals how AI safety actually works in 2026: risk is not a property of the question alone, but of the question multiplied by the capability of the system answering it. On biology, the calculus runs the other way. Opus 5 is now Anthropic's most capable generally available model for scientific research — scoring 10.2 percentage points higher than Opus 4.8 on the company's internal chemistry benchmark — though the spokesperson acknowledged that "Mythos 5 remains the stronger model for long-horizon, open-ended work like autonomous drug design campaigns."

The business stakes behind the launch: a $380 billion valuation and massive compute bets

The launch lands at a moment of extraordinary commercial momentum — and extraordinary obligations — for Anthropic. Reuters reported in February that the company was valued at roughly $380 billion in its latest funding round, following a period in which, per Contrary Research's analysis, its annualized revenue climbed from about $1 billion at the end of 2024 to a projected $9 billion by the end of 2025, with internal targets reportedly reaching $20 to $26 billion for 2026. Those targets are underwritten by enormous infrastructure commitments, including a reported $30 billion Azure compute deal alongside arrangements with Google Cloud and Nvidia — spending that only pencils out if enterprises keep expanding usage.

That is the context in which Opus 5's pricing strategy makes sense. Holding the price at Opus 4.8 levels while roughly doubling performance on key agentic benchmarks is effectively a steep price cut per unit of capability, designed to widen the funnel of workloads that are economical to automate. Every task that was marginal at Opus 4.8's cost-per-success becomes viable at Opus 5's — and every viable task is recurring token revenue.

The regulatory backdrop has grown more complex as well. A U.S. judge gave final approval this week to Anthropic's $1.5 billion copyright settlement with book authors, Reuters reported, closing a chapter of litigation over the company's early training data. And in June, Reuters, citing Axios, reported that the U.S. government had moved to block foreign access to Anthropic's most advanced models — a reminder that frontier AI is now entangled with export policy in ways that shape which customers can buy what.

Also shipping Friday: a Fast mode running at roughly 2.5 times default speed at twice the base price, automatic fallback routing on the API, and mid-conversation tool changes that no longer invalidate the prompt cache — a small feature that agent developers may appreciate more than any benchmark. Consistent with prior Opus models, Opus 5 carries no data retention requirements for general access, a point the spokesperson flagged unprompted for customers with "a hard zero data retention requirement." Developers can access the model as claude-opus-5 on the Claude API starting today.

Two questions will determine whether the bet pays off: whether Opus 5's efficiency claims survive contact with production workloads at scale, and whether enterprises embrace a world where safety classifiers, not users, sometimes decide which model answers. But the deeper message of Friday's launch is that the AI industry's center of gravity has moved. For three years, the labs competed on what their best model could do on its best day. With Opus 5, Anthropic is competing on something less glamorous and far more lucrative: what a very good model can do every day, for half the price. In a market where the frontier keeps moving, Anthropic is wagering that the real fortune lies just behind it.

Zimbra Phishing Campaign Uses CVE-2025-66376

LAUNDRY BEAR Targets Email and Sensitive Data

Ulej and Flowerbed Support Email Data Exfiltration

Organizations Urged to Patch Vulnerable Zimbra Systems

The post How to Build an End-to-End OCR Pipeline with Baidu’s Unlimited-OCR for High-Resolution Images and Multi-Page PDF Parsing appeared first on MarkTechPost.

The announcement, made by Microsoft AI's Superintelligence team, lands roughly a year after the company committed to building purpose-built models internally, and it arrives with an unusual level of specificity about where those models now run: Bing, PowerPoint, OneDrive, Dynamics 365, Excel, GitHub Copilot, and Azure. The message to enterprise buyers — and, implicitly, to OpenAI — is that Microsoft's homegrown models are no longer research projects. They are production infrastructure serving millions of users.

"Each of these enhancements is a step toward the same goal: Microsoft products, powered by Microsoft models," the company wrote in its announcement blog.

How MAI-Image-2.5-Pro and MAI-Voice-2-Flash stake out opposite ends of the AI cost curve

The two new releases occupy opposite ends of what Microsoft calls the quality-speed-cost curve, and the positioning is deliberate. MAI-Image-2.5-Pro targets the premium tier: hero imagery, detailed editing, and precise in-image text rendering — the last of which has long been a notorious weak spot for image generation models. Microsoft priced the model at $5 per million text input tokens, $8 per million image input tokens, and $106 per million image output tokens. The base MAI-Image-2.5 model recently launched at No. 2 for image editing on Arena, the community leaderboard that has become a de facto scoreboard for generative media.

The creative industry appears to be taking notice. Rob Reilly, global chief creative officer at advertising giant WPP, called the Pro model "a strong leap forward for GenMedia tools" in a statement included in Microsoft's announcement, adding that "Microsoft has firmly established itself among the leaders in generative AI."

MAI-Voice-2-Flash goes the other direction. First previewed at Microsoft's Build conference, Flash runs twice as fast as MAI-Voice-2 and costs 32% less, priced at $15 per million characters. It is designed for the unglamorous but enormous market of high-volume voice — call centers, voice agents, and real-time speech applications where latency and cost-per-call matter more than marginal gains in expressiveness. Together, the two models reflect a strategy of building families of models rather than a single flagship, because, as the company put it, a creative studio chasing maximum fidelity has very different needs from a customer service operation handling millions of calls a day.

Microsoft's production metrics show in-house models cutting GPU costs by up to 89%

The model launches are arguably less newsworthy than the deployment metrics Microsoft attached to them — numbers that read like a systematic case for swapping out third-party frontier models across its product portfolio. 

Bing Image Creator now runs entirely on MAI-Image-2.5, end to end, marking the first time the consumer image tool is fully in-house. In PowerPoint, Microsoft says MAI-Image-2.5 reduces GPU costs by up to 84% compared with GPT-Image-2, OpenAI's image model. In OneDrive, where MAI-Image-2.5 is now the default for key image-editing scenarios, the company reports a 26% increase in save rates, roughly 25% lower P95 latency, and 2.5 times greater efficiency under medium-utilization production workloads.

On the voice side, MAI-Voice-2-Flash now powers Dynamics 365 Contact Center — the platform used by customers including T-Mobile and EasyJet — where Microsoft claims GPU cost reductions of up to 89%. The model is also integrated into Azure Voice Live for developers building speech-to-speech agents.

Perhaps the most consequential deployment sits in healthcare. Microsoft's Dragon Copilot, used by 170,000 medical providers and responsible for processing 28 million patient encounters last quarter, now runs on MAI-Transcribe-1.5 for its multilingual workflow across 58 languages. Microsoft says internal evaluations show a 50% relative reduction in both transcription and language-identification error rates across most languages — a meaningful claim in a domain where transcription errors can propagate directly into clinical notes.

Inside the 'hill-climbing' strategy that lets small models beat GPT-5.6 in Excel

In a companion post published the same day, Microsoft detailed the methodology behind these results — what it calls its "hill-climbing machine," an integrated flywheel of data, models, and the product "harness" that surrounds them.

The clearest example is MAI-Code-1-Flash, the lightweight coding model launched in GitHub Copilot in June. Microsoft says the model achieves an approximately 10% higher code accept rate than GPT-5.4 Mini and Claude Haiku 4.5 in VS Code, while using 10% fewer median tokens. Developer retention tells a similar story: users were 6% more likely to return across multiple days than with GPT-5.4 Mini, and 11% more likely than with Claude Haiku 4.5.

Then Microsoft did something more interesting. It took the MAI-Code-1-Flash checkpoint and further trained it inside an Excel reinforcement learning environment, teaching a coding model the tools and workflows of spreadsheet knowledge work. The result, according to production user feedback, is a model on par with GPT-5.6 for the most common Excel tasks — while being small enough to run on Nvidia's older H100 and even A100 GPUs rather than requiring the latest-generation accelerators.

That hardware detail deserves emphasis. Every major AI company is fighting for allocation of cutting-edge chips, and a model that delivers frontier-adjacent quality on two-generation-old silicon fundamentally changes the deployment economics. It also frees the newest hardware — including Microsoft's now-operational GB200 cluster — for training rather than serving.

Satya Nadella's 'frontier diffusion' manifesto redraws the OpenAI relationship

Microsoft CEO Satya Nadella framed the announcements in a lengthy post on X titled "Frontier Diffusion & Control," which functions as something close to a strategic manifesto. "We can now take saturated frontier capabilities and deliver them at scale and at lower cost through models optimized for high-usage products, while continuing to use frontier models for frontier needs," Nadella wrote, adding that Microsoft is "beginning to route traffic across our first-party surfaces to MAI whenever our models match or outperform frontier alternatives."

Translated from executive prose: capabilities that were state-of-the-art a year ago are now table stakes, and Microsoft believes it can replicate them cheaply for the specific, repetitive tasks that dominate real product usage. Why pay frontier prices for a frontier model when a user just wants to reformat a spreadsheet column?

Nadella was careful to note that "frontier models from OpenAI and Anthropic are part of the orchestration system alongside MAI" — but he also articulated a pointed principle of model independence, arguing that a company's evaluations "should continue to hill climb even when any given model has been removed." 

“Keeping the harness, memory, context, and skills outside the model, he argued, is what gives Microsoft control. The subtext is hard to miss. Reuters reported in April that Microsoft’s exclusive license to OpenAI’s technology had been revised into a non-exclusive arrangement, and The Information reported last September that Microsoft had begun incorporating Anthropic models into some products. Wednesday’s announcement completes the triangle: Microsoft as orchestrator, with its partners’ frontier models as interchangeable components and its own models absorbing an ever-larger share of routine traffic.”

Developers cheer cheaper task-specific models while skeptics question Microsoft's track record

The response online captured both the appeal and the skepticism surrounding the strategy. "I love when people use small models for niche tasks," wrote one X user, @mavihsk, responding to Nadella's post. "Why do I have to use the all-knowing model just to change my field in Excel?" Another user, @nabu_lines, distilled the pitch neatly: "cost and performance both improve when you stop overusing the biggest model."

Others were less charitable about Microsoft's execution track record. "Microsoft is the worst when it comes to listening to user feedback," wrote designer @designedbyabin, arguing the company "will lose the AI race because they repeatedly failed to understand user needs." And one user, @tokenoverflow, offered a drier critique of the model-independence pitch: "i want it keep hill climbing after removing microsoft."

The skeptics raise a fair point. Microsoft's self-reported metrics — accept rates, save rates, GPU savings — come from its own internal evaluations, not independent benchmarks, and the company chooses which comparisons to publish.

But the strategy's logic does not depend on any single number. Nadella's framing that software now has "real marginal cost for the first time" explains why Microsoft is obsessive about tokens, GPUs, and serving costs: when AI features run on every keystroke across a billion-user product portfolio, an 84% GPU cost reduction is not an optimization. It is the difference between a viable business and a money pit.

Why Microsoft is turning its internal AI playbook into an Azure product

The final piece of the strategy is that Microsoft is selling the playbook, not just the models. Nadella explicitly positioned the hill-climbing approach as "a template for every other AI native, SaaS, or Enterprise company," and Microsoft is packaging the toolchain through Foundry and what it calls Frontier Tuning — letting enterprises train specialized models against their own proprietary evaluations and reinforcement learning environments. That turns Microsoft's internal cost-cutting exercise into an Azure product, and it gives enterprise customers a reason to run their AI workloads on Microsoft's cloud even if the models themselves come from elsewhere.

The company's emphasis on models trained "on clean, traceable, enterprise-grade data, without distillation from third-party models" serves the same commercial end. In an industry facing mounting scrutiny over training data provenance, Microsoft is betting that enterprise buyers — and courts — will care where model capabilities come from. Microsoft says it is now extending the hill-climbing approach to Copilot Chat, Outlook, and PowerPoint, and both new models are available in public preview through Microsoft Foundry and the MAI Playground. "None of this is an endpoint," the company wrote. "We're just getting started."

Seven years ago, Microsoft bet more than $13 billion that OpenAI would build the future of AI. Wednesday's announcement suggests the company has since learned a cheaper lesson: the future of AI may belong to whoever builds the frontier, but the profits belong to whoever makes it ordinary.

Read more of this story at Slashdot.

Summary

Successful exploitation of this vulnerability could allow an authenticated attacker to write arbitrary files to restricted system directories outside of the application's intended directory.

The following versions of Rockwell Automation ThinManager are affected:

• ThinManager >=13.0.0|<13.0.7, >=13.1.0|<13.1.5, >=13.2.0|<13.2.4, >=14.0.0|<14.0.2

Background

• Critical Infrastructure Sectors: Chemical, Critical Manufacturing, Energy, Food and Agriculture, Water and Wastewater
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: United States

Vulnerabilities

Acknowledgments

• Rockwell Automation reported this vulnerability to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability.

Minimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.

Locate control system networks and remote devices behind firewalls and isolating them from business networks.

When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

CISA also recommends users take the following measures to protect themselves from social engineering attacks:

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

No known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-14

Legal Notice and Terms of Use

Summary

Successful exploitation of these vulnerabilities could allow an attacker with network access to achieve remote code execution.

The following versions of Johnson Controls C-CURE 9000 and Victor application server are affected:

• C-CURE 9000 and victor <=v2.90_v3.0 
• victor Web <=v7.1 

Background

• Critical Infrastructure Sectors: Critical Manufacturing
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Ireland

Vulnerabilities

Acknowledgments

• Harrison Neal reported these vulnerabilities to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities. CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

CISA also recommends users take the following measures to protect themselves from social engineering attacks:

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

No known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-23

Legal Notice and Terms of Use

Summary

Successful exploitation of this vulnerability could result in an attacker obtaining confidential information from the device.

The following versions of Johnson Controls XAAP Android are affected:

• XAAP Android <1.53

Background

• Critical Infrastructure Sectors: Critical Manufacturing
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Ireland

Vulnerabilities

Acknowledgments

• Johnson Controls reported this vulnerability to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability.

Minimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.

Locate control system networks and remote devices behind firewalls and isolating them from business networks.

When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

No known public exploitation specifically targeting this vulnerability has been reported to CISA at this time. This vulnerability is not exploitable remotely.

Revision History

• Initial Release Date: 2026-07-23

Legal Notice and Terms of Use

Summary

Successful exploitation of these vulnerabilities could allow an unauthenticated network-adjacent attacker to crash critical IEC 61850 services or execute arbitrary code, disrupting or compromising protection, visibility, and control functions.

The following versions of MZ Automation libIEC61850 are affected:

• libIEC61850 >=v1.0.0|<=v1.6.1 

Background

• Critical Infrastructure Sectors: Critical Manufacturing, Energy, Transportation Systems
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Germany

Vulnerabilities

Acknowledgments

• Abhinav Agarwal reported these vulnerabilities to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities.

Minimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.

Locate control system networks and remote devices behind firewalls and isolating them from business networks.

When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

CISA also recommends users take the following measures to protect themselves from social engineering attacks:

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

No known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-23

Legal Notice and Terms of Use

Summary

Successful exploitation of this vulnerability could cause the parsing process to crash, which will cause a denial of service.

The following versions of MZ Automation lib60870 are affected:

• lib60870 <=2.4.0

Background

• Critical Infrastructure Sectors: Chemical, Energy, Water and Wastewater
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Germany

Vulnerabilities

Acknowledgments

• Lars Tray reported this vulnerability to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of this (these) vulnerability(ies).

Minimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.

Locate control system networks and remote devices behind firewalls and isolating them from business networks.

When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

CISA also recommends users take the following measures to protect themselves from social engineering attacks:

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

No known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-23

Legal Notice and Terms of Use

Summary

Successful exploitation of these vulnerabilities could allow an attacker with access to the IT network to manipulate industrial control devices without requiring physical access, specialized insider knowledge, or advanced tooling.

The following versions of Panduit IntraVUE are affected:

• IntraVUE <=3.2.1a14 

Background

• Critical Infrastructure Sectors: Critical Manufacturing, Energy, Information Technology, Water and Wastewater
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Netherlands

Vulnerabilities

Acknowledgments

• Phlebas of Lumintel reported these vulnerabilities to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of these vulnerabilities.

Minimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the Internet.

Locate control system networks and remote devices behind firewalls and isolating them from business networks.

When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

CISA also recommends users take the following measures to protect themselves from social engineering attacks:

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

No known public exploitation specifically targeting these vulnerabilities has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-23

Legal Notice and Terms of Use

Summary

Successful exploitation of these vulnerabilities could allow a non-privileged user to escalate privileges or view the credentials of other users.

The following versions of Weintek cMT3092X are affected:

• cMT3092X firmware <20210218 
• EasyWeb <v2.1.20

Background

• Critical Infrastructure Sectors: Critical Manufacturing
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: Taiwan

Vulnerabilities