The post Building Self-Evolving AI Agents with OpenSpace Using Skills, MCP, Lineage, and Low-Cost Reuse appeared first on MarkTechPost.

Adobe Patches for June 2026

For June, Adobe released 11 bulletins addressing 123 unique CVEs in Adobe Acrobat Reader, ColdFusion, Experience Manager, Experience Manager Forms, InDesign, InCopy, Substance 3D Sampler, Content Credentials SDK, Dreamweaver, Format Plugins, and Adobe Campaign Classic. A total of 11 of these CVEs were reported through the ZDI program.

Here’s this month’s overview table:

Obviously, the update for Campaign Classic should be on the top of your deployment list if you’re a user. A CVSS 10 is rare; two in the same bulletin is pretty much a unicorn. Adobe says there are no active attacks, but I would expect heavy research into creating one. The update for Coldfusion is also a Priority 1, but again, no known attacks is the wild. I suspect the Reader patch will also receive a lot of attention as malicious PDFs are common in ransomware attacks. The update for Experience Manager may be large, but it’s mostly just cross-site scripting (XSS) bugs.

Microsoft Patches for June 2026

This month, Microsoft released a new record 208 CVEs Windows and Windows components, Office and Office Components, Microsoft Edge (Chromium-based), Azure, .NET and Visual Studio, Github Copilot, Defender, Exchange Server, Hyper-V, Secure Boot, and BitLocker. At least, that’s my count. Microsoft’s tools seem to be having some issues, as they initially included a CVE from 2020 in this release. Regardless, the count is over 200, and I counted several times.

One of these bugs came through the ZDI program, but bugs submitted during Pwn2Own Berlin remain unpatched. If you include the Chromium and other third-party bugs, the total CVE count for June comes to a staggering 571 CVEs. 38 of these cases are rated Critical while the rest are rated Important in severity.

I’ve been counting CVEs on Patch Tuesday since 2017, and this is by far the largest monthly release in that time. The previous record was 177 set last year. It is extraordinary that Microsoft can produce so many patches in a single month, but it does raise concerns. How many of these cases were found using AI tools? How many patches were generated using AI to assist in coding or testing? What quality issues may exist in these patches? And likely most importantly, is this the new normal? The last two months were also large releases. Should sysadmins adjust their processes for prioritization and patch deployment based on this new volume of updates? Unfortunately, Microsoft is not providing those answers right now. Hopefully that changes in the future. BTW – just a note – the current number of CVEs shipped by Microsoft this year exceeds the total number of CVEs shipped in all of 2018.

One of the bugs patched by Microsoft this month is listed as under active exploitation and three others are listed as publicly known at the time of release. Let’s take a closer look at some of the more interesting updates for this month, starting with the bug being exploited in the wild.

-   CVE-2026-41091 - Microsoft Defender Elevation of Privilege Vulnerability
Since Microsoft doesn’t provide info on how widespread exploitation is, we must read some tea leaves. For this patch, several different people were acknowledged, which indicates multiple parties say this is in the wild, meaning exploitation is likely significant. The good news is that most people won’t need to take action as Defender updates itself. However, if you don’t have this configured or are in an isolated environment, you’ll need to update to the latest version.

-    CVE-2026-45657 - Windows Kernel Remote Code Execution Vulnerability
This CVSS 9.8 bug allows remote, unauthenticated attackers to execute code at SYSTEM level without user interaction. Yup – this is wormable. The problem lies in the way the kernel handles TCP/IP. This was listed as “Exploitation Less Likely” by Microsoft, but rest assured that every researcher and bug shop on the planet is reversing this patch right now trying to create an exploit. Test and deploy this patch quickly.

-    CVE-2026-47291 - HTTP.sys Remote Code Execution Vulnerability
Our second CVSS 9.8 bug of the month, this also allows remote, unauthenticated attackers to execute code on affected systems without user interaction. However, there is a caveat. Systems using the default MaxRequestBytes registry value used by the Windows HTTP stack are not affected by this bug. You can edit your registry settings if you need protection while you test and deploy the patch. The bulletin includes instructions and even a PowerShell script for doing this action. Microsoft lists this as “Exploitation more likely”, so I would definitely check your registry settings.

-    CVE-2026-44815 - DHCP Client Service Remote Code Execution Vulnerability
Here’s another CVSS 9.8 that has an odd incongruity. Although the CVSS says no permissions are required for exploitation, the write-up states it must be an “authenticated” user. I would err on the side of caution here and believe the CVSS. If that’s correct, then we have another bug where a remote, unauthenticated attacker could execute code on affected systems without user interaction. And since the DHCP client is on every OS, it’s a juicy target. This is another one to test and deploy with haste.

-    CVE-2026-45585/CVE-2026-50507 - Windows BitLocker Security Feature Bypass Vulnerability
If you’ve followed the ongoing saga of Nightmare Eclipse vs. MSRC, the bugs should look familiar. One is definitely a fix for “YellowKey”, while the other appears to be a fix for “GreenPlasma”. The researcher has promised a “bone shattering” drop on June 14, so let’s hope Microsoft is able to reach some understanding with the researcher before more 0-days are released. Also, there is a script provided by Microsoft as a mitigation, but the better strategy is to test and deploy the updates.

 Here’s the full list of CVEs released by Microsoft for June 2026:

* Indicates this CVE had been released by a third party and is now being included in Microsoft releases.

† Indicates further administrative actions are required to fully address the vulnerability.

Looking at the other Critical-rated bugs in this release, the scariest-looking one is actually nothing to concern yourself with at all. The CVSS 10 bug in Azure HorizonDB has already been addressed by Microsoft and is just being documented now. That’s also the case for five others. Of course, there wouldn’t be a release without Office bugs that have the Preview Pane as an attack vector. There are multiple in June. There’s a handful of bugs in the Remote Desktop Client, but these rely on connecting to a malicious RDP server. There are three patches for Hyper-V that allow for guest-to-host code execution. The bug in Active Directory requires authentication, but any authenticated user can hit it. For the Windows Directory Service vulnerability, it needs to be listening for TFTP. You have blocked that everywhere, right? The bug in Azure Network Adapter is somewhat unique as you need to update your Linux kernel to be protected. The bug in Azure Kubernetes allows an attacker to break out of a container and gain control of the AKS worker node. Finally, the bug in the Kerberos Key Distribution Center (KDC) seems unlikely, but if exploited, it could allow authenticated attackers to get code execution on affected systems.

Moving on to the other code execution bugs, there are the ubiquitous open-an-own bugs in Office components like Excel and Word. The code injection bug in Exchange Server looks troubling, but it requires a machine-in-the-middle (MiTM), so exploitation is unlikely. The bugs in SharePoint require authentication, but you should note that the patch applies to both SharePoint Server 2016 and SharePoint Enterprise Server 2016. The two bugs in UPnP are interesting. Both can lead to code execution by causing an error during the handling of specially crafted data, which could lead to a Use After Free (UAF) bug. The bugs in RDP Client all require connecting to a malicious RDP server, but it’s not clear why some are rated Critical and some are rated Important. The NTFS vulnerability requires a user to mount a virtual hard drive on an affected system. The last RCE bug this month is in Azure Stack Edge and requires the attacker to send a specially crafted file upload request that includes a manipulated file name or path, leading to code execution.

There are more than 60 Elevation of Privilege (EoP) bugs in this month’s release, and as usual, most simply lead to local attackers executing their code at SYSTEM-level privileges or administrative privileges, so there’s not much to add without further technical details about the bugs themselves. A notable exception is in Exchange Server, where a user on Outlook Web Access (OWA) could gain access to other mailboxes. The bug in Visual Studio Code could allow attackers to gain permissions associated with the MCP Server’s managed identity. The bugs in Windows SDK and Windows UI Automation Manager could let attacker go from low integrity up to medium integrity code execution. The bug in Bluetooth just allows “elevated” privileges without really describing what elevated might be.

Moving on to the more than 20 security feature bypass (SFB) bugs in the June release, there are a total of 10 that impact Secure Boot. All carry scope change (S:C) in the CVSS, meaning successful exploitation affects security boundaries beyond the vulnerable component itself — specifically the ability to load untrusted code at boot, bypass Virtual Secure Mode, and undermine boot integrity guarantees. CVE-2026-45654 explicitly calls out VSM exposure. The bulk of these are credited to Alon Leviev (STORM), which is notable given his prior BootKitty/BlackLotus-adjacent research. The bugs in the Windows Boot Manager have a similar impact as the Secure Boot bugs. The UEFI Secure Boot vulnerabilities go a layer deeper. They require either local admin or physical access but could allow for the running of untrusted code even before the OS loads. Rootkits anyone? The four bugs in BitLocker all require physical access but could yield encrypted data if exploited. The bug in Windows Administration Protection allows attackers to bypass the feature that prevents standard-user apps from performing admin-level actions. The bug in Visual Studio Copilot Chat could be the most interesting non-boot bug here as it allows authentication impersonation. Mark of the Web (MotW) and Excel vulns could bypass user warnings. Lastly, the bug in PC Manager bypasses expected user controls.

Turning our attention to the mass of spoofing bugs in the release, we instantly see 18 impacting SharePoint Server. Fortunately, these are simply cross-site scripting (XSS) bugs. It’s the Exchange bugs we should really watch for. One is an XSS that an attacker can exploit by convincing an Exchange administrator to open a malicious link or message, which then runs code in the admin's web session. That's a meaningful privilege escalation path. Another is listed as an SSRF-based attack, but no other details are available. The last is a lower-impact XSS with limited confidentiality/integrity loss. The bug in Bing Search (remember Bing?) is a classic search result spoofing. The bug in Azure Stack Edge is interesting as it could allow access to resources outside the vulnerable component's security boundary. The bug in Office for Android requires user interaction. The Office Project Server bug is an authenticated XSS with low impact. The final spoofing bug is in Azure Attestation but has already been addressed. You should still verify you are protected by following the instructions in the write-up from Microsoft.

There are 30 different information disclosure bugs in this release, and fortunately, the vast majority of these simply result in info leaks consisting of unspecified memory contents or memory addresses. The two bugs in Visual Studio require user interaction and could “disclose information over a network.” How obtuse. The bug in GitHub Copilot and Visual Studio Code could disclose discloses a sign-in access token for a user's work account. That's a meaningful credential exposure, not just random memory. That leaves the two bugs in Exchange Server. One could allow an authenticated user to gain information about which network services that the Exchange server can reach. The other sounds much like the spoofing bug in OWA as it allows attackers to see information in mailboxes they should not have access to.

I’ve never been a fan of the “tampering” category, as it could mean so many different things. For example, the bug in .NET simply says it could allow an unauthorized attacker to perform tampering locally. Similarly, the bug in Visual Studio says the same, expect here the tampering occurs over a network. Microsoft doesn’t even bother with a CWE for the tampering bug in the DHCP Server, so your guess is as good as mine.

There are seven DoS bugs in the June release, and as usual, Microsoft provides little to no actionable information about the vulnerabilities. The most interesting is the bug in HTTP.sys, which is listed as publicly known. This is an uncontrolled resource consumption, rated "Exploitation More Likely," and publicly disclosed. Since, HTTP.sys sits at the core of IIS and Windows web services, a network-accessible DoS here can take down any Windows server running HTTP-based services. Based on the Acknowledgement, it looks like this bug may have been found using AI. There are no real details for the other bugs, but based simply on the impact, I would focus on the Kerberos and TCP/IP bugs if you had to prioritize.

No new advisories are being released this month.

Looking Ahead

The next Patch Tuesday will be on July 14 and will be the last one before Black Hat/DEFCON. It’s usually a big release, so strap in and hang on. I’ll be back then to give you my full thoughts. Until then, stay safe, happy patching, and may all your reboots be smooth and clean!

A remote code execution vulnerability exists in the HTTP Protocol Stack for Microsoft Internet Information Services implemented in HTTP.sys. The vulnerability is due to invalid validating incoming HTTP requests.

A remote, unauthenticated attacker can exploit this vulnerability by sending crafted HTTP packets to the target system. Successful exploitation of this vulnerability can result in a denial-of-service condition, or, in the worst case, code execution with kernel privileges.

The Vulnerability

HTTP.sys is the kernel-mode HTTP protocol driver in Microsoft Windows. It provides HTTP request parsing, response caching, and SSL/TLS termination for Internet Information Services (IIS) and other applications that register URL prefixes. The driver listens on configured TCP ports (commonly 80 for HTTP and 443 for HTTPS) and processes inbound HTTP/1.x and HTTP/2 requests at the kernel level.

When operating over HTTPS, HTTP.sys delegates TLS processing to the Windows Secure Channel (SChannel) provider. Inbound TCP data is decrypted on a per-record basis: each TLS record constitutes an independent unit of encryption and is decrypted separately by SChannel before being delivered to HTTP.sys as a distinct plaintext buffer. A single TLS 1.3 application data record has the following structure:

The decrypted payload of each TLS record is delivered independently to the HTTP parser via

UlHttpBufferReceiveEvent(), regardless of how many TLS records the underlying TCP connection coalesces into a single TCP segment. This behavior is distinct from plaintext HTTP connections, where the Windows TCP stack coalesces multiple segments into a single receive indication before the data reaches HTTP.sys.

The HTTP parser maintains a per-request state object that includes a dynamically grown buffer reference array. The capacity field stores the current number of allocated slots in the buffer reference array. The count field stores the number of slots currently in use. The ref_array_ptr field points to the dynamically allocated array of 8-byte buffer reference entries.

An integer overflow vulnerability exists in HTTP.sys. The vulnerability is due to insufficient bounds checking when growing a buffer reference array during HTTP/1.x header parsing. When HTTP.sys receives data for an HTTP/1.x request, it allocates a UL_REQUEST_BUFFER structure for each receive indication and tracks these buffers in the per-request reference array described above. The count field records the number of active buffer references, and the capacity field records the total number of allocated slots.

As the HTTP parser (UlpParseNextRequest()) processes header lines, it calls an inline buffer reference routine each time a new receive buffer is consumed. When count reaches capacity, the routine grows the array by reallocating it with five additional slots. The new allocation size is computed as 0x28 + capacity * 8, the contents of the existing array are copied via memmove using count * 8 as the copy length, and capacity is incremented by 5 as a 16-bit unsigned integer addition. No overflow check is performed on this addition.

After 13,107 growth events, capacity reaches 0xFFFB. The next growth adds 5, producing 0x10000, which truncates to 0x0000 in the 16-bit field. On the subsequent buffer reference addition, count (which is now 65,536 or greater) exceeds the zero capacity, triggering another growth. The allocation size computation 0x28 + 0 * 8 produces a 40-byte allocation, but the memmove copies count * 8 bytes (approximately 524,256 bytes) from the old buffer into the 40-byte allocation. This results in a kernel pool heap buffer overflow of over 500 kilobytes.

Each buffer reference corresponds to one receive buffer delivered to the HTTP parser. For plaintext HTTP connections, the Windows TCP stack coalesces received segments into large indications, and UlpMergeBuffers() further combines buffers within HTTP.sys. Over TLS connections, each TLS record is decrypted independently by SChannel and delivered as a separate buffer through UlHttpBufferReceiveEvent() into UlpCopyIndicatedData(). If each TLS record contains exactly one complete header line (terminated by CRLF), the HTTP parser fully consumes the buffer without setting the partial-parse flag, causing UlpAdjustBuffers() to advance to the next buffer via its non-merge path. This creates a 1:1 correspondence between TLS records sent and buffer references accumulated.

To trigger the overflow, an attacker crafts an HTTP request in which each header line is encapsulated in a separate TLS application data record. Given a minimum header line size of approximately 4 bytes and a required count of 65,536 buffer references, the total request size comes to roughly 262,144 bytes. The MaxRequestBytes registry value (at HKLM\SYSTEM\CurrentControlSet\Services\HTTP\Parameters) must be configured to a value of at least 262,144 bytes for the server to accept a request of this size. The default value of 16,384 bytes limits the request to approximately 4000 header lines, which is insufficient to trigger the overflow. As a mitigation, keeping MaxRequestBytes at or below 65,535 bytes represents the most conservative configuration to prevent this attack.

A remote unauthenticated attacker could exploit this vulnerability by sending a specially crafted HTTP/1.x request over a TLS connection to an affected server. Successful exploitation results in unexpected system termination due to a memory access exception in the context of the kernel. Under specific memory layout conditions, exploitation could result in arbitrary code execution in the context of the kernel.

Notes:

• The vulnerability is only reachable through HTTP/1.x header parsing over TLS connections. HTTP/2 and HTTP/3 use different parser paths that do not interact with the buffer reference array.

• Body data parsing (Content-Length or chunked transfer encoding) does not add entries to the buffer reference array. Only header parsing triggers buffer reference growth.

• At a sending rate of 10 milliseconds per TLS record, the overflow requires approximately 11 minutes to trigger.

Source Code Walkthrough

The following code snippet was taken from HTTP.sys version 10.0.26100.7705. Comments added by TrendAI Research have been highlighted.

In UlpParseNextRequest():

Detection Guidance

To detect an attack exploiting this vulnerability, the detection device must monitor and parse traffic on the TCP port 443.

The traffic on the affected port(s) is TLS-encrypted. The detection device must be able to decrypt the TLS traffic before applying the following detection method. The detection device should monitor for HTTPS connections.

An HTTP/1.x request [1] consists of a request line followed by zero or more header field lines, each terminated by CRLF. The following grammar defines the relevant structure:

Decrypted traffic inspection:

After decrypting the TLS session, the detection device must parse the HTTP/1.x request headers. The detection device must count the number of distinct header field lines present in a single HTTP request. If the number of header field lines in a single request exceeds 1,000, the traffic should be considered suspicious; an attack exploiting this vulnerability is likely underway.

Encrypted traffic heuristics:

Where decryption is not available, the detection device should inspect the pattern of TLS application data records within the encrypted session. If each TLS application data record contains a single short payload and the total number of such records on a single connection exceeds 1,000, the traffic should be considered suspicious; an attack exploiting this vulnerability is likely underway.

Notes:

• The preferred detection method (header line count) requires the ability to decrypt TLS traffic, for example through TLS inspection, a decrypting proxy, or possession of the server's private key. This method directly observes the attack indicator and produces low false-positive and false-negative rates.

• The TLS record heuristic operates on encrypted traffic and does not require decryption. This method is more prone to false positives (legitimate applications that send many small TLS records, such as interactive streaming sessions, may trigger the heuristic) and to false negatives (the threshold is based on observable record sizes rather than the actual header count that determines exploitability). Where possible, decrypted traffic inspection should be preferred.

• The attack requires approximately 11 minutes of sustained connection to accumulate sufficient header lines. Connection duration monitoring may serve as a supplementary detection heuristic.

Conclusion

This vulnerability was patched by Microsoft in the June 2026 release cycle. They note several mitigations that include editing the registry to ensure unpatched systems are not vulnerable to exploitation. However, the best method to ensure this bug has been fully remediated is to test and deploy the vendor-supplied patch.

Special thanks to Yazhi Wang and Jonathan Lein of the TrendAI Research team for providing such a thorough analysis of this vulnerability. For an overview of TrendAI Research services, please visit https://go.trendmicro.com/tis/vulnerabilities.html.

The threat research team will be back with other great vulnerability analysis reports in the future. Until then, follow the team on Twitter, Mastodon, LinkedIn, or Bluesky for the latest in exploit techniques and security patches.

For Jun 2026, Apple released 37 unique CVEs across iOS 26.5.2 / iPadOS 26.5.2, macOS Tahoe 26.5.2, Safari 26.5.2. Since Apple doesn’t provide CVSS scores or other severity information, we’re left to speculate on which of these bugs is the most severe. The overwhelming majority (31 of 37) are WebKit/WebRTC bugs reachable through malicious web content. Most of those are crash/DoS bugs rather than code execution, so the real risk lives in the small set of kernel bugs and the handful of WebKit sandbox escapes. However, there are a couple that stand out.

-    CVE-2026-43724 (Kernel) – According to Apple, “An app may be able to cause unexpected system termination or write kernel memory.” A kernel memory write is the highest-value primitive here: it's the privilege-escalation half of a full exploit chain and leads to complete device control. The bug was credited to Hyunwoo Kim (@v4bel), who is known to be a serious kernel researcher.

-    CVE-2026-39868 (Kernel) – Another kernel bug, this one could “cause unexpected system termination or corrupt kernel memory.” This is kernel memory corruption, and notably credited to a roster of elite offensive researchers (STAR Labs, Positive Technologies, Baidu Security). This kind of attribution usually signals a weaponizable, possibly Pwn2Own-grade bug rather than a theoretical crash.

-    CVE-2026-43725 / CVE-2026-43701 (WebKit) – Apple states these bugs could allow a website to process restricted web content outside the sandbox. I'm flagging this sandbox-escape pair over the many WebKit crash bugs because a sandbox escape is the bridge that turns a web-content bug into a path toward the kernel issues above. It's the most dangerous remotely-triggered class in the release.

Here’s a look at all the bugs released by Apple this month:

We’ll continue these macOS updates if people find them useful. Stay tuned for the regularly schedule Patch Tuesday blog covering Adobe and Microsoft.

Pwn2Own Ireland returns for 2026, and it’s the third year for this event in the Emerald Isle. Despite the dreary Irish skies (and the threat of a random banshee), we had an amazing event, even if we did end up in a jail at the end. With that in mind, we’re excited to return to Cork this fall for yet another great Pwn2Own event. We’ll also be returning to some of the great pubs Ireland has to offer in the evenings and wrapping the event up at a special location (stay tuned for that announcement).

As for the contest itself, it will run from October 6-9, 2026. As always, we’ll have a random drawing to determine the schedule of attempts on the first day of the contest, and we will proceed from there. Registration closes at 5:00 p.m. Irish Standard Time on Oct 1st, 2026. There are no exceptions for late entries, so if you have questions, please contact us at pwn2own@trendmicro.com (note the address). We will be happy to address your issues or concerns directly.

Due to the overwhelming amount of registrations and last-minute entries for our Pwn2Own Berlin event, we’re changing who can enter the contest a bit to ensure it’s fair for all researchers. To enter, you must have received an aggregate bounty payment totaling at least $15,000 during their life-time participation in ZDI. This includes past Pwn2Own events and our regular bug bounty program. We recognize there may be some who haven’t participated in the past with great exploits to demonstrate, so we will also accept up to 10 new contestants at our discretion. We’re capping the number of entries to 80 this year. Once we have 80 qualifying entries, we will close registration. That means if you want to enter, it is in your best interest to contact us sooner rather than later. Please read the rules thoroughly to ensure you meet all the requirements.

Now on to this year’s target categories. We’ll have seven different categories for this year’s event:

-- Mobile Phones
-- Smart Home Devices
-- Wellness
-- Printers
-- Messaging
-- AI Infrastructure
-- AI Coding Agents

Let’s take a look at each category in more detail, starting with mobile phones.

The Target Phones

Back in Amsterdam where this contest originated, it was originally dubbed “Mobile Pwn2Own” and our focus was strictly on phones. Mobile handsets remain at the heart of this event, and some of the Samsung entries from last year were absolutely smashing. As always, these phones will be running the latest version of their respective operating systems with all available updates installed. Last year we also introduced the USB attack vector, but no one submitted an entry for it. We’ll see if that changes this year.

Otherwise, contestants must compromise the device by browsing to content in the default browser for the target under test or by communicating with the following short-distance protocols: near field communication (NFC), Wi-Fi, or Bluetooth. The awards for this category are:

Back to top

Smart Home Devices

As you might have noticed, we have eliminated most of the consumer-related devices from this year’s event. However, there are still a few “pro-sumer” devices that still could have an impact on enterprises, and the first of these categories are the devices that control other devices and services. An attempt in this category must be launched against the target’s exposed network services, RF attack surface, or exposed features from the contestant’s laptop within the contest network.

Back to top

Wellness Category

This is one of the new categories this year and our first foray into the world of healthcare devices. However, we don’t intend to make this too easy. Entries that require physically pressing any button on the target, or the use of any information, code or PIN printed on the device, are out of scope. Entries that require the contestant to be paired to the target prior to the start of the attempt are not in scope. An attempt in this category must be launched against the target’s exposed network services, RF attack surface, or exposed features from the contestant’s laptop within the contest network.

Back to top

Rage Against the Printers

Printers have long been the source of jokes and memes, but they are also an often overlooked attack surface in your office. The printer category always produces some interesting results, often by playing music it shouldn’t or the occasional Rick Roll. We’ve reduced the number of targets in this category this year, but we still expect to see some interesting exploits in these oft unheralded targets.

Back to top

The Messaging Category

We introduced WhatsApp as a target last year and came close to seeing a functioning exploit. Sadly, that didn’t happen. However, WhatsApp is used by more than three billion people globally, and some of the messages transmitted can be quite sensitive. That’s why we are bringing it back and hoping for some better results. We know the bugs are out there. We’re just hoping the right researcher decides to show us an exploit that leads to code execution. All of the target handset will be available as clients. Here’s the full prize list for Messaging category:

Back to top

AI Infrastructure Category

We introduced these targets at Pwn2Own Berlin, and we saw such…uh…enthusiasm from the community that we decided to immediately bring them back for our Ireland event. An attempt in this category must be launched from the contestant’s laptop. Here’s a look at the targets and awards in the AI Infrastructure category:

Back to top

AI Coding Agent Category

Let’s face it. At some point or another, we’ve probably all vibe coded something. There’s no shame in that, but how secure are the tools we use for vibe coding? Well, let’s take the most popular choices and find out. A successful entry must interact with a contestant-controlled resource (e.g. web page, repository, media file) to exploit a vulnerability within the coding agent. The attack vector of the entry must be a common coding agent use case. There are few things out of scope here as well. UI spoofing or misrepresentation unrelated to permission prompts, model jailbreaks or prompt outputs that do not cross security boundaries, and vulnerabilities that require unsafe or permission-less modes are just a few of the things not allowed. As this is a recently updated category, please read the rules carefully to ensure your entry qualifies. Here’s a look at the targets and awards in the AI Coding Agent category:

Back to top

Master of Pwn

No Pwn2Own contest would be complete without crowning a Master of Pwn, which signifies the overall winner of the competition. Earning the title results in a slick trophy, a different sort of wearable, and brings with it an additional 65,000 ZDI reward points (instant Platinum status in 2027).

For those not familiar with how it works, points are accumulated for each successful attempt. While only the first demonstration in a category wins the full cash award, each successful entry claims the full number of Master of Pwn points. Since the order of attempts is determined by a random draw, those who receive later slots can still claim the Master of Pwn title – even if they earn a lower cash payout. As with previous contests, there are penalties for withdrawing from an attempt once you register for it. If the contestant decides to remove an Add-on Bonus during their attempt, the Master of Pwn points for that Add-on Bonus will be deducted from the final point total for that attempt. For example, someone registers for the Apple iPhone 15 with the Kernel Bonus Add-on. During the attempt, the contestant drops the Kernel Bonus Add-on but completes the attempt. The final point total will be 20 Master of Pwn points.

The Complete Details

The full set of rules for Pwn2Own Ireland 2026 can be found here. They may be changed at any time without notice. We highly encourage potential entrants to read the rules thoroughly and completely should they choose to participate. We also encourage contestants to read this blog covering what to expect when participating in Pwn2Own.

Registration is required to ensure we have sufficient resources on hand at the event. Please contact ZDI at pwn2own@trendmicro.com to begin the registration process. (Email only, please; queries via social media, blog post, or other means will not be acknowledged or answered.) If we receive more than one registration for any category, we’ll hold a random drawing to determine the contest order. Registration closes at 5:00 p.m. Irish Standard Time on Oct 1st, 2025.

The Results

We’ll be blogging and tweeting results in real-time throughout the competition. Be sure to keep an eye on the blog for the latest information. Follow us on Twitter at @thezdi and @trendaisecurity, and keep an eye on the #P2OIreland hashtag for continuing coverage.

We look forward to seeing everyone in Cork, and we look forward to seeing what new exploits and attack techniques they bring with them.

©2026 Trend Micro Incorporated. All rights reserved. PWN2OWN, ZERO DAY INITIATIVE, ZDI, TrendAI, and Trend Micro are trademarks or registered trademarks of Trend Micro Incorporated. All other trademarks and trade names are the property of their respective owners.

Adobe Patches for July 2026

Adobe has now moved to a bimonthly release schedule, which means they will be releasing patches on the second and fourth Tuesdays of the month. I’ll continue to cover the second Tuesday release here and update this blog should the fourth Tuesday release contain anything significant. I think this is a smart way to break up a monster release into something a bit more manageable. Apple has said they are taking a similar approach. We’ll see if other vendors follow their lead.

For the first part of the July release, Adobe released 12 bulletins addressing 88 unique CVEs in Adobe ColdFusion, Commerce, After Effects, Animate, Audition, Bridge, Creative Cloud Desktop Application, Experience Manager, Illustrator, Media Encoder, Premiere Pro, and the Content Credentials SDK.

Here’s this month’s overview table:

While nothing is under active exploit, I would prioritize the Cold Fusion and Commerce patches first. The patch for Cold Fusion even clocks in with a CVSS 9.9 bug. Beyond that, most of these updates are pretty straightforward. If you’re using these products, patch them. However, you can use you regular patch cadence here.

Microsoft Patches for July 2026

Here it is. The Mother of All Releases. To call this record-breaking is an understatement. How to count this mess is anyone’s guess, but I see new Microsoft 621 CVEs for the month of July. Some of these are in online services where no user action is required. They also list about 480 bugs in Chromium and Microsoft Edge (Chromium-based) that I won’t cover here. Here’s how I put this in context. I looked at the last 20 years of Microsoft releases. The CVE count year-to-date exceeds all other years’ totals.

The products covered this month are also astonishing. There are patches for Windows and Windows components, Office and Office Components, Microsoft Edge (Chromium-based), Azure, .NET and Visual Studio, Github Copilot, Defender, Exchange Server, Hyper-V, Ages of Empire II, and Minecraft Server (really!). That phrase “Windows components” does some pretty heavy lifting here, too, as just about everything you’ve ever heard of is getting patched. All told, there are 63 rated Critical, six rated Moderate, one rated Low, with the rest rated Important in severity. Eight of these bugs were submitted through the ZDI program (more on that later). Two CVEs are listed as under active exploit while one other is listed as publicly known.

So how do we eat this elephant? One byte at a time (pun intended). Let’s start by looking a closer look at some of the more interesting updates for this month, starting with the bugs being exploited in the wild.

-    CVE-2026-56155 - Active Directory Federation Services Elevation of Privilege Vulnerability
This is one of several AD FS being patched this month, but it’s the only one being actively exploited. It stems from insufficient access-control granularity and does require local access and low privileges to start, but AD FS is exactly the kind of identity infrastructure attackers love to pivot through once they're in. It can also be paired with an RCE as we often see in ransomware. Test and deploy this patch quickly.

-    CVE-2026-56164 - Microsoft SharePoint Server Elevation of Privilege Vulnerability
The other bug being exploited in the wild this month is a modest CVSS 5.3 – but it shows why Moderate severity bugs still matter. It's a missing-authentication flaw, meaning an unauthenticated attacker can hit it over the network with no user interaction required. When something this reachable is being actively abused, patch it now and worry about the score later.

-    CVE-2026-57092 - Microsoft Windows VMSwitch Elevation of Privilege Vulnerability
This patch rates the highest CVSS score for the month: a solid 9.9. It’s a use-after-free that lets a low-privileged attacker escalate to full host compromise across a VM boundary. We saw something like this demonstrated at Pwn2Own Berlin on ESXi, but it clearly isn’t alone. If you’re using VMSwitch in your Hyper-V deployments (and you likely are), test and deploy this one quickly.

-    CVE-2026-50522/58644 - Microsoft SharePoint Remote Code Execution Vulnerability
This matching pair of CVSS 9.8 bugs results from the deserialization-of-untrusted-data and are reachable without authentication or user interaction. CVE-2026-50522 was demonstrated during Pwn2Own Berlin, so it’s odd to see Microsoft list it as “Exploit Maturity Unknown” since we literally handed them a working exploit. Just another reason to do your own risk assessment and not rely 100% on the vendor. If you have any Internet accessible SharePoint servers, test and deploy this patch quickly.

-    CVE-2026-56190 - Remote Desktop Protocol Remote Code Execution Vulnerability
This patch covers an unauthenticated, network-reachable, no user interaction required bug. The root cause is a classic one: use of uninitialized resource (CWE-908), meaning specially crafted RDP traffic can interact with memory that was never properly initialized, letting an attacker corrupt memory and potentially steer code execution. RDP Servers are a common target, so audit your systems to see which are internet accessible and start from there.

-    CVE-2026-55008 - Microsoft Exchange Server Spoofing Vulnerability
Ignore the title here and treat this like the XSS bug it is. The vulnerability is listed as a CVSS 9.6 since it’s a stored cross-site scripting flaw in Outlook Web Access, with a scope-changed impact that lets it break out of the web app context entirely. An attacker sends a specially crafted email, and if the victim simply opens it in OWA, arbitrary JavaScript executes in their browser session — no attachment needed, no macro warning, just viewing the message does it. If you’re using OWA, test and deploy this one quickly.

-    CVE-2026-50518 - Windows DHCP Server Remote Code Execution Vulnerability
There are a couple of these DHCP RCE patches in this release, but the other has caveats while this one does not. Both are heap-based buffer overflows scoring CVSS 9.8, both unauthenticated and network-reachable. If you're running DHCP Server role on anything Internet-adjacent (you're not, right?), these move to the top of the list.

-    CVE-2026-56188 - Windows Server Network driver Remote Code Execution Vulnerability
Another Critical-rated bug, this one is caused by a race condition. It’s always fun to see a TOCTOU bug rated this high, since race conditions are notoriously finicky to exploit reliably. While it may prove tricky to exploit, this bug could allow an attacker to execute privileged code over the network without user interaction. Don’t let the race condition lull you to sleep on a wormable bug.

-    CVE-2026-55010 - Minecraft Bedrock Dedicated Server Remote Code Execution Vulnerability
File this in the “why not” category. This bug is a heap-based buffer overflow in Minecraft Bedrock Dedicated Server, also CVSS 9.8 and also unauthenticated RCE. Yes, your kid’s Minecraft server (it is your kid’s server, right?) is exposed to the same class of bug as your DHCP infrastructure. Patch it anyway.

Here’s the full list of CVEs released by Microsoft for July 2026: