Executive summary 

A group of Russian state-supported cyber actors has been targeting and compromising various Western government and commercial organizations using the Zimbra Collaboration Suite (ZCS) software since at least July 2025. The Russian state-supported advanced persistent threat (APT) group’s activity is tracked in the cybersecurity community under several names (see Cybersecurity industry tracking), primarily as “LAUNDRY BEAR,” a name initially coined by the Netherlands General Intelligence and Security Service (AIVD) and Defence Intelligence and Security Service (MIVD) [1].

LAUNDRY BEAR’s targeting is almost certainly to gather sensitive information for the Russian Federation, with these actors primarily focusing on the covert acquisition of email data. Previous campaigns indicated LAUNDRY BEAR relied on unsophisticated initial access techniques—including password spraying, phishing, and pass-the-cookie—allowing the group to successfully run high-volume operations. The latest campaign targeting ZCS uses a novel exploit that was a zero-day vulnerability when first exploited and continues to be successfully exploited. The vulnerability, Common Vulnerabilities and Exposures (CVE) CVE-2025-66376, was patched in November 2025. This demonstrates LAUNDRY BEAR’s intent and ability to deploy increasingly sophisticated technical capabilities.

Unlike traditional phishing campaigns that persuade a user into taking an action, such as clicking a link or opening a file, LAUNDRY BEAR’s latest campaign leverages a view-based exploit that only requires a user to view a malicious email within a vulnerable version of the webmail service. Once viewed, the exploit attempts to exfiltrate the victim’s last 90 days of email communications, the organization email directory (i.e., Global Address List [GAL]), and other sensitive information to servers controlled by LAUNDRY BEAR. The exploit also attempts to establish persistent access to victim accounts through a variety of means as detailed in the Persistence and credential access section.

This Cybersecurity Advisory (CSA) warns of this ongoing malicious threat activity and urges organizations to update their vulnerable software and implement additional mitigations to thwart these Russian state-supported actors’ continued success. The CSA is being released by the following authoring and co-sealing agencies:

• United States National Security Agency (NSA)
• United States Federal Bureau of Investigation (FBI)
• Netherlands Defence Intelligence and Security Service (MIVD)
• Netherlands General Intelligence and Security Service (AIVD)
• United States Cybersecurity and Infrastructure Security Agency (CISA)
• United States Defense Counterintelligence and Security Agency (DCSA)
• United States Department of Defense Cyber Crime Center (DC3)
• United States Department of the Treasury
• United States Naval Criminal Investigative Service (NCIS)
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Communications Security Establishment Canada’s (CSE’s) Canadian Centre for Cyber Security (Cyber Centre)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• United Kingdom National Cyber Security Centre (NCSC-UK)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)¹
• Danish Defence Intelligence Service (DDIS)²
• Estonian Foreign Intelligence Service (EFIS)³
• Finnish Defence Intelligence (FDI)⁴
• Finnish Security and Intelligence Service (SUPO)⁵
• French General Directorate for Internal Security (DGSI)⁶
• French National Cybersecurity Agency (ANSSI)⁷
• Italian External Intelligence and Security Agency (AISE)⁸
• Italian Internal Intelligence and Security Agency (AISI)⁹
• Security and Intelligence Service of the Republic of Moldova (SIS RM)¹⁰
• Polish Foreign Intelligence Agency (AW)¹¹
• The Military Counterintelligence Service of Poland (SKW)¹²
• Spain National Intelligence Centre (CNI)¹³
• Sweden National Cyber Security Centre (NCSC-SE)¹⁴

The authoring agencies urge any organizations using ZCS to implement the recommendations listed within the Mitigations section of this advisory to reduce the risk associated with this activity. This CSA also includes specific remediations for organizations to implement if they discover the presence of the listed Indicators of compromise (IOCs).  

As more organizations update their ZCS software based on this CSA, LAUNDRY BEAR may discontinue the current campaign exploiting this vulnerability; however, based on the success of this and previous campaigns, it is very likely that the group will continue to target ZCS and other email systems used by organizations in Western countries. The actors will almost certainly continue to rely on email to engage potential victims by exploiting novel vulnerabilities and, when necessary, use social engineering techniques to assist with their efforts. The authoring agencies recommend organizations regularly update their mail service software and continuously monitor their email systems and emails for malicious activity.

For a downloadable list of IOCs, see:

• AA26-204A.stix.xml (STIX XML)
• AA26-204A.stix.json (STIX JSON)

Cybersecurity industry tracking

The cybersecurity industry provides overlapping cyber threat intelligence, indicators of compromise (IOCs), and mitigation recommendations related to these Russian state-supported cyber actors. While not exhaustive, the following are threat group names commonly used for these actors within the cybersecurity community:

• LAUNDRY BEAR
• Void Blizzard [2]
• CL-STA-1114 [3]
• TA488 (formerly UNK_PitStop) [4]

Note: Cybersecurity companies have different methods of tracking and attributing cyber actors, and this may not be a 1:1 correlation to the U.S. government’s understanding for all activity related to these groupings.

Background

Public advisories from Netherlands General Intelligence and Security Service (AIVD), Netherlands Defence Intelligence and Security Service (MIVD), and Microsoft highlighted these Russian state-supported advanced persistent threat (APT) actors in May 2025, calling them LAUNDRY BEAR and Void Blizzard respectively [1] [2]. Both advisories assessed that the group was engaged in malicious cyber activity as early as April 2024.  

The May 2025 advisories highlighted a cluster of activity targeting cloud-based email environments, including Microsoft Exchange in particular, and abusing legitimate APIs to perform data exfiltration in bulk [T1114.002]. The group relied on unsophisticated means of initial access, including procuring stolen credentials on criminal marketplaces [T1078], and using social engineering techniques to lure targets into interacting with a malicious site masquerading as a legitimate one. As of April 2025, one of these sites resembled a European Defence & Security Summit registration portal that required registrants to sign in to their Microsoft account to view. Once a user entered their Microsoft credentials into this malicious site, LAUNDRY BEAR’s modified version of the open source adversary emulation toolkit, Evilginx, intercepted the user’s credentials. LAUNDRY BEAR then used this authentication data, including passwords and session tokens, to access the compromised account and conduct mass email exfiltration, as well as harvest other information. This method of compromise is commonly known as an adversary-in-the-middle (AiTM) technique [T1557].  

Beginning around July 2025, LAUNDRY BEAR shifted toward a more technical method of email compromise, highlighting their continued efforts to covertly acquire email communications from a variety of Western organizations of interest and deliver them to the Russian Federation. Using a custom-developed capability [T1587.001] named “Улей” or “Ulej” (Russian for beehive), LAUNDRY BEAR successfully targeted and exfiltrated sensitive user information from organizations who use the Zimbra Collaboration Suite (ZCS) product [T1114]. Data LAUNDRY BEAR attempted to exfiltrate from compromised accounts included:

• Last 90 days of emails,
• Email address,
• Password [T1589.001],
• Global Address List (GAL) [T1087],
• Two-factor authentication (2FA) tokens, and
• Newly-created Application Passcode [T1098].

The covert and persistent nature of this activity, along with the absence of any known financial extortion, almost certainly indicates this group’s involvement in espionage activities with Russian government backing. Additionally, extensive Ukrainian targeting, prior to use against U.S. and other NATO allies, outlines an increasing trend within Russian cyber threat groups to target Ukrainian users first—both as a priority target and as a testbench for malicious cyber techniques before broader global deployment.

Targeting details

LAUNDRY BEAR has targeted and compromised users in various organizations, including those associated with:

• the Defense Industrial Base (DIB),  
• the federal and local government,
• education,
• energy,
• law enforcement,  
• media,  
• non-governmental organizations, and
• technology.

Technical details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise framework, version 19. This advisory also uses MITRE D3FEND^TM version 1.4.0¹⁵. See Appendix A and Appendix B for tables of the activity mapped to MITRE ATT&CK and D3FEND tactics, techniques, and countermeasures.

Ulej is a novel data exfiltration and aggregation capability, that currently (as of the publication of this report) supports a campaign specifically targeting users of ZCS webmail servers. This capability is used to exploit CVE-2025-66376 [Common Weakness Enumeration (CWE) CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')], but likely could be adapted to exploit other vulnerabilities. It exfiltrates emails and other sensitive user data from a victim’s system immediately after exploitation and stores the data in an actor-controlled unattributable virtual private server (VPS) [T1074.002] running LAUNDRY BEAR’s “Flowerbed” collection framework. The collected data is almost certainly further exfiltrated to internal network resources for review and long-term retention.

Reconnaissance

LAUNDRY BEAR uses the Ulej capability to exploit the CVE-2025-66376 vulnerability in organizations using ZCS. This campaign’s targeted victimology and limited exploitation capabilities likely indicate this group manually identifies and targets the victim organizations. LAUNDRY BEAR likely identifies organizations with public-facing Zimbra infrastructure by port scanning [T1595] and fingerprinting datasets easily procured through various commercial vendors [T1596.005].  

After identifying a target organization, the group likely compiles email addresses for individual users to target with the exploit [T1589.002] from datasets offered by commercial vendors [T1597.002], open source intelligence [T1593], or previously exfiltrated data [T1597].  

Resource development

The actors procure VPSs from a variety of providers [T1583.003], including those with Know Your Customer (KYC) requirements, and often use fabricated identities. LAUNDRY BEAR primarily uses Mullvad VPN [T1583] when interacting with these servers, further demonstrating the group’s intent to mask their identity and maintain operations security (OPSEC). After the server is provisioned, an automated process deploys the Docker containers necessary for Ulej’s Flowerbed framework [T1608], which then receives and aggregates the data Ulej exfiltrates. These servers are typically only used for 7-60 days before moving to new infrastructure.

Flowerbed framework

Flowerbed is a Python project that uses Docker for containerization. The project includes four different Docker containers:

• Catcher,
• Certbot,
• Nginx, and
• Gardener.

Catcher acts as both a DNS and HTTP server to receive and aggregate exfiltrated victim information [T1048]. For additional information on Catcher, refer to the Exfiltration section of this advisory. Flowerbed’s next container, Certbot, is based on one of the official Certbot containers, which allows for automated generation of Let’s Encrypt certificates using DNS challenges through Cloudflare. This certificate can then be used by the Nginx container, which serves as an HTTPS reverse proxy for Catcher, enabling Flowerbed to disguise some of its exfiltration activity through an encrypted communications channel [T1048.002]. The Nginx reverse proxy also validates that the Server Name Indicator (SNI) value contains “*.i.*” prior to forwarding the traffic to Catcher. If the SNI does not contain that string, the Nginx server returns a 444 error to the client. This is likely an attempt to reject non-Ulej connections. Finally, the Gardener container functions as a health check for the Catcher service. Gardener is a simple Python script that validates Catcher correctly receives and processes data.

The simplistic Flowerbed codebase has indications that artificial intelligence (AI) played a role in its development. This highlights how AI is increasingly being used to develop malicious capabilities [T1588.007]. The dependence on AI for a simple capability, such as Flowerbed, alongside a previous reliance on open source capabilities, such as Evilginx2 [T1588.002], likely indicates a lack of advanced technical knowledge within LAUNDRY BEAR, especially in relation to true software development capabilities.

Initial access

To gain initial access, LAUNDRY BEAR sends an email containing a malicious JavaScript payload to the target [T1566]. Through exploitation of CVE-2025-66376, this JavaScript payload is immediately executed once the user views the malicious email [T1203], such as the one shown in Figure 1, in the ZCS webmail platform. Since at least November 2025, LAUNDRY BEAR began sending these phishing emails from victim infrastructure through compromised accounts [T1199], as shown in the email metadata in Figure 2. These compromised accounts were likely previous victims of this, or another LAUNDRY BEAR, campaign and their use is intended to further obfuscate and frustrate anti-phishing tools and training.

According to the National Vulnerability Database (NVD), CVE-2025-66376 was initially published on 5 January 2026. This vulnerability allows for execution of a JavaScript payload included in email content due to improper sanitization of Cascading Style Sheet’s (CSS) @import directives within an email [5]. Because the activity attributed to this campaign began in July 2025—months before Synacor released a patch and the CVE was published—the payload initially exploited a zero-day vulnerability at that time [T1587.004].  

Utilization of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability.

Hidden in LAUNDRY BEAR’s email is a Base64 encoded payload within the “onload” field of a Scalable Vector Graphics (SVG) element [T1027.017], as shown in Figure 3. Leading up to the inclusion of this payload in the SVG element are various instances of @import directives, as required to leverage CVE-2025-66376. This payload includes an XOR encrypted final script encoded in a Base64 inner payload (see Figure 3) [T1027.013]. The outer payload decodes and decrypts the inner payload using an XOR function and a hardcoded key and then executes the script contained within the inner payload containing the collection and exfiltration logic. By changing the key used for the XOR encryption of the inner payload or adding additional @import directives with non-functional code [T1027.010], LAUNDRY BEAR can easily generate new payloads that bypass basic threat detection signatures. This malicious payload attempts to collect and exfiltrate information in 12 asynchronous stages [T1119]. The stages in order of appearance within the payload are as follows:

1. sendStartPing,
2. gather_email,
3. gather_environment,
4. gather_2fa_codes,
5. gather_app_password,
6. gather_device_status,
7. gather_oauth_consumers,
8. gather_autocomplete_password,
9. enable_mail_protocols,
10. gather_gal,
11. sendArchives, and
12. sendFinishPing. 

Use of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability [T1587].

Persistence and credential access

To establish sustained persistence into the victim’s email account, the script attempts to modify account preferences and collect authentication information. Any collected credentials are later exfiltrated, as further described in the Exfiltration section below. Other campaigns attributed to LAUNDRY BEAR also demonstrated the group’s ability to circumvent multi-factor authentication through session token replay [T1550.004], and the Zimbra campaign follows a similar trend.

The script used in this campaign tries to discover the victim’s email address during the gather_email stage [T1087]. The script searches for this email address in two ways. First, it examines the batchInfoResponse variable, which an HTML script element on the webpage can define, for an email address. Even if the script finds an email address there, it also checks whether it acquired a Cross-Site Request Forgery (CSRF) token as described later in the Collection section of this advisory. If so, the script uses the “GetIdentitiesRequest” Simple Object Access Protocol (SOAP) command under the “ZimbraAccount” namespace to determine the victim’s email address [T1185] and then exfiltrates it. However, if the script does not have a CSRF token or the SOAP request fails, the script exfiltrates the email value recovered from the first method instead. If both attempts fail to capture the victim’s email, the script sends a JavaScript Object Notation (JSON) payload with a key of “email” and value of null over HTTPS and does not attempt DNS exfiltration.

During the gather_autocomplete_password stage, the script attempts to collect the victim’s saved password via the autocomplete feature of the victim’s password manager. The script injects two HTML div elements requesting login credentials onto the page outside of the victim’s view, as shown in Figure 4 and Figure 5. After waiting five seconds, the script then attempts to extract the password provided automatically by the password manager from the input element shown in Figure 4. If there is no value in that input field, it checks the password input field shown in Figure 5. If neither input field contains a value, a JSON payload with a key of “autocomplete_password” and value of null is sent over HTTPS and DNS exfiltration is not attempted.

LAUNDRY BEAR almost certainly relies on a mail client using the Internet Message Access Protocol (IMAP) for persistent access to the victim’s mailbox. During the enable_mail_protocols stage, a SOAP request leveraging the “ModifyPrefsRequest” command under the “ZimbraAccount” namespace is sent. This request attempts to set the “zimbraPrefImapEnabled” preference to TRUE. While the default setting for “zimbraPrefImapEnabled” is not well documented, this action is almost certainly intended to ensure that IMAP access to the victim’s mailbox is enabled.

ZCS does not support 2FA for some mail clients, including IMAP. To support users who rely on IMAP clients, ZCS allows for the generation of Application Passcodes. Application Passcodes are randomly generated passwords that can be used for clients that cannot support the normal 2FA process to authenticate. During the gather_app_password stage, the script makes a SOAP request using the “CreateAppSpecificPasswordRequest” command under the “ZimbraAccount” namespace to create a new Application Passcode [T1556.006]. The SOAP request uses “ZimbraWeb” as the name of the application.

Additionally, the script also attempts to collect 2FA tokens. During the gather_2fa_codes stage, the script makes a SOAP request using the “GetScratchCodesRequest” command under the “ZimbraAccount” namespace. The script then attempts to exfiltrate any non-null 2FA codes collected this way. The number of codes can vary, and each code is exfiltrated to Flowerbed individually.

Collection

As demonstrated in the Persistence and credential access section, this script relies heavily on SOAP requests to collect victim information. To make these requests, the script aims to acquire the victim’s current CSRF token, which it attempts to access within the webpage’s local storage using localStorage.getItem("csrfToken"). If the script is unable to acquire this CSRF token, it will be unable to make any SOAP requests. In addition to the SOAP commands documented in the Persistence and credential access section, other SOAP commands executed to collect victim information are shown in Table 1.

The script attempts to collect the victim’s GAL through brute force by searching for each two-character combination from a character set of “abcdefghijklmnopqrstuvwxyz1234567890.-_”. These queries are conducted using 20 batches of SOAP requests with 77 “SearchGalRequest” SOAP commands in each batch except for the last request containing only 58.

During the gather_environment stage, the script attempts to determine which type of ZCS webmail client the victim is using. The script checks the user’s current URL to determine the client type being used, checking for certain indicators (shown in Table 2) to determine the client type. The corresponding value is then used as the payload when exfiltrating the client type.

As part of collection, the script attempts to harvest any emails not marked as “junk” from the last 90 days from the victim’s account. Emails are collected daily by an HTTP GET request to the URL path, “/home/~/?fmt=tgz&meta=0&query=date:-{DAY_OFFSET}d AND (not in:junk)”. The {DAY_OFFSET} value would be between 0 and 89 representing how many days ago the email was sent or received. To prevent redundant collection and exfiltration of emails, a variable with a name based on the email date being queried, using a format of zd_comp_YYYY-MM-DD, and value of true, is saved to the window.top.localStorage property. This variable is saved regardless of whether the email is successfully exfiltrated.  

According to Mozilla documentation, if the user is not in a private browsing session, any data stored to localStorage does not typically expire. This means that if the user happens to execute the script again from the same computer, the script avoids attempting to re-exfiltrate previously captured emails. However, the script always attempts to pull any emails with a {DAY_OFFSET} of zero. In other words, the script always pulls emails sent or received the same day it is run. After email results are returned from the query for each day of email activity, those results are then passed to Flowerbed as described in the Exfiltration section.

The script also provides LAUNDRY BEAR with telemetry on any errors that occur during the collection process. This is accomplished by executing any collection or exfiltration code through helper functions that contain error handling logic. If an error occurs, a payload containing information on the error itself, the context of the error happening, and the stage in which the error occurred is sent to Flowerbed as described in the Exfiltration section below. For cases where the error occurs within a SOAP request, “:api” is concatenated to the stage value in the payload. If an error occurs during the batch SOAP requests that occur when collecting the GAL of the victim, the stage value will use a format of gather_gal:{VAL}:api. The {VAL} placeholder indicates which batch request, a number from 0 to 19, the error occurred in. Errors that occur during the password autocomplete interception process will use “gather_autocomplete_password:dom” for the stage value. Finally, if an error occurs when attempting to collect or exfiltrate a specific day’s emails, the stage will include which day the error occurred on, using the previously defined placeholder {DAY_OFFSET}, with a format of sendArchive:day-{DAY_OFFSET}.

Exfiltration

At the end of each stage in the collection process, the script attempts to exfiltrate acquired information to Flowerbed. The script primarily relies on two forms of data exfiltration: DNS [T1048.003] and HTTPS. Some information is exfiltrated over both the DNS and HTTPS channels.

Prior to exfiltration, a randomized 10- or 11-character alphanumeric string is generated as an identifier for the victim. This identifier is included in the URL of both the DNS- and HTTPS-based exfiltration.  

DNS exfiltration

DNS exfiltration occurs through DNS A record queries. To ensure data exfiltrated through DNS is not corrupted when traversing through non-actor-controlled DNS infrastructure, Ulej maintains compliance with RFC 1035, Domain Names - Implementation and Specification, specifically accounting for the case insensitivity and subdomain length requirements. Base32 encoding is used to create a case-insensitive payload. Once the payload is encoded, a period (“.”) is added every 60 characters to ensure each subdomain is under 63 characters long. The script then creates a new image object sourced from a URL with the scheme defined in Figure 6. Any traffic involving DNS exfiltration will have “d-“ prefixing the victim identifier, and the subdomain immediately following indicates the type of information being exfiltrated.

When the script generates an image object, the browser tries to retrieve the complete domain of the URL specified as the source of the image. This triggers a DNS request sent to the actor-controlled server and processed by Flowerbed. Table 3 lists both the information exfiltrated via DNS and their corresponding data type identifiers in the DNS queries.  

HTTPS exfiltration

Any information exfiltrated via DNS is also exfiltrated through HTTPS, as well as additional data including email content, contacts, attachments, and error logging information. By using Let’s Encrypt certificates, this group can quickly deploy new infrastructure and leverage encrypted HTTPS communications with valid server certificates when exfiltrating information from the victim’s environment. The HTTPS exfiltration capability only uses two HTTP content types, defined in Table 4. Traffic associated with HTTPS exfiltration will use the URL scheme shown in Figure 7.  

Some of the data transmitted via HTTPS uses the standard JSON content type format. The script includes the information in a POST request to actor-controlled infrastructure.  

Table 5 provides a summary of the JSON-based exfiltration.

The script transmits all HTTPS exfiltration not identified in Table 5 using the Octet-Stream content type as binary data. The POST requests for this method include a filename in the “X-Filename” header. Traditionally, developers use headers prefixed with “X-” to denote custom headers that do not follow a defined standard. The purpose of including this header remains unclear since the Catcher capability ignores the provided filename when saving the data. Table 6 summarizes the data exfiltrated in this format.

The script sends all exfiltrated data identified in Table 6 to the Catcher service exactly as received from the SOAP request in a JSON payload, except for email exfiltration. For email exfiltration, the script sends it as a GZIP compressed archive [T1560]. Although most of the exfiltration consists of valid JSON, the script still attempts to exfiltrate all information identified in Table 6 using the application/octet-stream content typing rather than application/json.

At the beginning and end of the collection and exfiltration activity, during the sendStartPing and sendFinishPing stages respectively, the script submits a POST request with a JSON payload to indicate that the script is starting or finishing execution. Throughout execution, the script also logs error events and send the logs using similar JSON payloads. The script sends the JSON in a POST request to the URL documented in Figure 2, using a URL path of “/v/p” and with a “subtype” key that shows which type of action it logged (start, finish, or error).  

Catcher

Ulej exfiltrates information to Flowerbed to be handled by a service named Catcher. Catcher is a containerized Python application, running in Docker as part of Flowerbed, which is detailed in the Resource development section. It receives exfiltrated data and temporarily stores it, enabling its eventual transfer to infrastructure designed for long-term, secure storage.

Catcher acts as an HTTP server over port 8000 and a DNS server on port 53. As described in the Resource development section, the Flowerbed project uses an additional Docker container running an Nginx reverse proxy to enable HTTPS support. This reverse proxy uses a certificate generated by Let’s Encrypt and forwards all traffic with an SNI containing “*.i.*” to port 8000 within the Catcher container.

The DNS service can accept A, AAAA, MX, TXT, and CAA queries. For any MX, AAAA, or CAA queries, the server will always provide an empty response. The system only supports TXT records as needed to process Automatic Certificate Management Environment (ACME) requests, which enable the assignment of Let’s Encrypt certificates. If the server receives an A query, Catcher will always respond with the public IP address of the Flowerbed server.  

However, if a query includes a domain formatted as shown in Figure 6 and Figure 7, the service saves a log file in JSON format to disk containing the following details of the DNS query:

• Time of query,
• Source IP address for query,
• Queried domain, and
• Type of query.

The HTTP server typically responds with OK, except in cases where the path is “pixel.gif” when the response contains a 1x1 gif image with a SHA-256 hash of ef1955ae757c8b966c83248350331bd3a30f658ced11f387f8ebf05ab3368629. Like the DNS service, the HTTP service will only log entries when the domain found in the host header of the request follows the expected formatting as seen in Figure 6 and Figure 7. As the HTTPS exfiltration uses non-standardized binary and JSON-formatted payloads when exfiltrating to Catcher, Catcher will check the content type of the request. If the content type is set to “application/json”, Catcher encodes the data in Base64 and includes it in the JSON log entry written to disk. If the content type is set to any other value, Catcher leaves the Base64 payload in the JSON log entry blank and saves the payload to a separate file with the same filename as the JSON log entry with a “.bin” file extension. An HTTPS exfiltration event causes Catcher to save a JSON formatted log file to disk containing the following information from the HTTP request:

• Time,
• Source IP address,
• Request method,
• Host,
• Path,
• Query string,
• Headers, and
• Base64 payload.

These JSON event log files and binary output files are then initially saved to the directory /root/hits/tmp and later moved to the /root/hits/ready directory once processed. This prevents incomplete files, which are still being uploaded to Catcher, from premature exfiltration from the server. Approximately every 60 seconds, a likely automated workflow establishes a Secure Shell (SSH) connection with the server hosting Flowerbed for a few seconds, almost certainly exfiltrating the data processed by Catcher to non-public-facing infrastructure. The command in Figure 8 also executes hourly to remove all files last modified at least two days ago from the /root/hits/ready directory.

Response strategies

Mitigations

In many cases, by the time an organization identifies a compromise related to this campaign, numerous sensitive and proprietary emails have already been exfiltrated. The significant risk posed by this cyber threat emphasizes the importance for organizations that use ZCS and other similar webmail solutions to take proactive steps to mitigate this risk.

All organizations that use the ZCS webmail service should immediately prioritize ensuring that their ZCS is not running a vulnerable version. A patch for CVE-2025-66376 was released for both 10.1.13 and 10.0.18 versions of ZCS [D3-AH]. If immediate patching is not feasible, organizations should advise employees to use alternative mail clients to access email and avoid using the Classic ZCS webmail client until ZCS is updated to a non-vulnerable version [d3f:Isolate].

System administrators should closely monitor any Internet-connected ZCS or other email systems and the workstations that access those systems and promptly apply available software updates [D3-AH]. Administrators can maintain awareness of active vulnerability exploitation by referencing open source resources, including CISA’s Known Exploited Vulnerabilities Catalog and NCSC-UK’s Responding to active exploitation of vulnerabilities guidance.

Organizations should consider using a third-party authentication service that supports passkeys for authentication to mediate access to ZCS and other services that do not natively support passkeys. By doing so, organizations can work to eliminate the possibility of automated password collection from autocomplete or password reuse [D3-CH]. However, Application Passcodes may still be necessary and should be monitored closely.  

Organizations should implement network monitoring capabilities with collection and short-term retention of packet capture or NetFlow data and maintain log collection and storage [CPG 3.Q]. This will allow organizations to monitor for and identify suspicious network activity [CPG 4.B], such as:

• Significant amounts of outbound data being sent to IPs associated with VPS providers not used by the organization [D3-NTA];
• Frequent DNS queries for a suspicious domain with seemingly random subdomains [D3-DNSTA];
• A sudden spike of connections to a server associated with a recently established domain [D3-NTCD]; and  
• Connections to internal services, such as webmail, from VPN providers frequently leveraged by this group for nefarious activity, such as Mullvad VPN [D3-NTCD].

Additionally, for organizations that can inspect the content of outbound HTTPS connections via break-and-inspect infrastructure, security teams should identify traffic matching the characteristics described in the Exfiltration section of this advisory.

Indicators of compromise (IOCs)

Flowerbed infrastructure

The following indicators have been attributed to use by LAUNDRY BEAR for their campaign targeting ZCS’s webmail service as of the publication of this advisory. (Disclaimer: Due to the frequency of operational structure changes by this group, these indicators are intended solely for historic attribution purposes. Some indicators, such as IPs, compromised emails, and domains, may be outdated, so organizations should check for current activity before acting on these IOCs.) Table 7 provides details about the server infrastructure used to host Flowerbed, and Table 8 lists the corresponding SHA-1 hash values for the Let’s Encrypt certificates used by that infrastructure [D3-IAA].

LAUNDRY BEAR has used the following email addresses to procure resources used for this campaign:

• ivanka.zurabishvili@proton[.]me,
• zmul1@buildandconsulting[.]com,
• garrysmithme@pinmx[.]net, and
• hostingclient@pinmx[.]net.

Phishing distribution

LAUNDRY BEAR primarily relied on ProtonMail for distribution of malicious email. However, as stated above, LAUNDRY BEAR’s more recent efforts likely have shifted to distributing the payload through previous victims.  

The following email addresses have distributed payloads attributed to this campaign:

• c.laurent.ejfa@proton[.]me,
• j.moreau.epsc@proton[.]me,
• liberty.insights@proton[.]me,
• certain email addresses (presumably compromised) at the isofts.kiev[.]ua domain (i.e., ending with @isofts.kiev[.]ua), and
• certain email addresses (presumably compromised) at the navs.edu[.]ua domain (i.e., ending with @navs.edu[.]ua).

Additionally, the following are SHA-256 hashes of email samples containing the malicious payload attributed to this campaign:

• 98df604ecc57f884a2e6ce3266a0013ad64455cac48442c2312cfa4765007aaf,
• 60db9abae75cd8ccc49dd7ea5feb41677566dcd442f12ebc5745ffd2810fb874,
• b1f5beb1175fc5c7d1806a2f0d900eb124c54f0286c5c52b66eea7a6633adb1d, and
• 1517b3caa495f6c4e832df9c75fc94667e3c233773f7fa4e056d5e30e5ead760.

Post-compromise artifacts

Currently, the script does not remove artifacts. This leaves additional opportunities to identify victims of this activity. While emphasis should always be placed on consistent monitoring of network traffic and endpoint activity, there are a variety of persistent artifacts described below that can be used to identify victims of this campaign.

This Ulej capability relies on creating a significant number of SOAP requests to collect account information for exfiltration. ZCS logs from these requests are stored, by default, in the /opt/zimbra/log/mailbox.log file [D3-PA]. A significant amount of SOAP request activity that aligns with what was described in the Persistence and credential access and Collection sections of this advisory could indicate a potential compromise. Specific examples of high-risk SOAP request activity might include:

• Many SearchGalRequest command requests from a single user over a short period of time;
• Use of the CreateAppSpecificPasswordRequest command, especially in cases where it is creating an Application Passcode named “ZimbraWeb”; and
• Use of the GetScratchCodesRequest command.

While LAUNDRY BEAR uses the localStorage property to track what days had emails previously exfiltrated, defenders can use this property to identify victims of this campaign and determine the scope of exfiltrated information [D3-PA]. Review of the items stored in that property for an organization’s ZCS webmail client page on an endpoint device could indicate compromise if there are items named with a format of zd_comp_YYYY-MM-DD, as explained in the Collection section of this advisory.

While Application Passcodes have non-malicious purposes, in this case instances of these passcodes with the name “ZimbraWeb” are almost certainly malicious. The ZCS webmail application can support 2FA natively and does not require the use of an Application Passcode, so there is no reason that there should be one named “ZimbraWeb.”

In instances where organizations identify victims of this campaign, they should also examine the inbox of the suspected victim for the original phishing email [D3-MA]. If an email that has a payload exploiting CVE-2025-66376 is discovered, steps should be taken immediately to identify and quarantine other instances of emails with similar body content, senders, and subject lines to prevent further exploitation and exfiltration.  

Remediation

In the event an organization identifies activity associated with this campaign, that organization should take steps to minimize further exploitation. The organization should consider requesting that employees minimize use of the ZCS webmail client until the organization updates to a patched version that is not vulnerable to CVE-2025-66376.

Organizations should use identifiers from the IOCs section of this report to identify any individuals compromised by this campaign and record the date(s) of compromise(s) to determine the scale and scope of emails exfiltrated.

All users from the organization should have all Application Passcodes and 2FA scratch keys revoked. Affected organizations should require all employees to change passwords in line with establishing minimum password strength requirements [CPG 3.B] and creating unique credentials [CPG 3.C], specifically noting that compromised employees might have had any password stored in a password manager exfiltrated.

Works cited

[1] Netherlands General Intelligence and Security Service (AIVD) and Netherlands Defence Intelligence and Security Service (MIVD). AIVD and MIVD identify a new Russian cyber threat actor. 2025. https://www.aivd.nl/site/binaries/site-content/collections/documents/2025/05/27/aivd-en-mivd-onderkennen-nieuwe-russische-cyberactor/Advisory+AIVD+en+MIVD+Public+report+on+new+cyber+actor.pdf

[2] Microsoft Corporation. New Russia-affiliated actor Void Blizzard targets critical sectors for espionage. 2025. https://www.microsoft.com/en-us/security/blog/2025/05/27/new-russia-affiliated-actor-void-blizzard-targets-critical-sectors-for-espionage/

[3] Palo Alto Networks Unit 42. Russian Global Webmail Espionage. 2026. https://unit42.paloaltonetworks.com/russian-webmail-espionage/ 

[4] Proofpoint. TA488 Targets Zimbra Mailservers with Half-Click Exploits. 2026. https://www.proofpoint.com/us/blog/threat-insight/ta488-zcs-exploit

[5] Seqrite. Operation GhostMail: Russian APT exploits Zimbra Webmail to Target Ukraine State Agency. 2026. https://www.seqrite.com/blog/operation-ghostmail-zimbra-xss-russian-apt-ukraine/  

Footnotes

¹ Národní úřad pro kybernetickou a informační bezpečnost
² Forsvarets Efterretningstjeneste
³ Välisluureamet
⁴ Sotilastiedustelu
⁵  Suojelupoliisi
⁶ Direction générale de la sécurité intérieure
⁷ Agence nationale de la sécurité des systèmes d’information
⁸ Agenzia Informazioni e Sicurezza Esterna
⁹ Agenzia Informazioni e Sicurezza Interna
¹⁰ Serviciul de Informații și Securitate al Republicii Moldova
¹¹ Agencja Wywiadu
¹² Służba Kontrwywiadu Wojskowego
¹³ Centro Nacional de Inteligencia
¹⁴ Nationellt Cybersäkerhetscenter
¹⁵ MITRE and ATT&CK are registered trademarks of The MITRE Corporation. MITRE D3FEND is a trademark of The MITRE Corporation.

Acknowledgements

The authoring agencies acknowledge the contributions to this advisory from Palo Alto Networks Unit 42 and Proofpoint.

Disclaimer of endorsement

The information and opinions contained in this document are provided "as is" and without any warranties or guarantees. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement, recommendation, or favoring by the United States Government, and this guidance shall not be used for advertising or product endorsement purposes.

Organizations have no obligation to respond or provide information back to the authoring organizations in response to this joint advisory. If, after reviewing the information provided, an organization decides to provide information to the authoring organizations, reporting must be consistent with all applicable laws and policies.

Purpose

This document was developed in furtherance of the authoring agencies’ cybersecurity missions, including their responsibilities to identify and disseminate threats, and to develop and issue cybersecurity specifications and mitigations. This information may be shared broadly to reach all appropriate stakeholders.

Contact

Appendix A: MITRE ATT&CK tactics and techniques

See Table 9 through Table 19 for all the threat actor tactics and techniques referenced in this advisory.

Appendix B: MITRE D3FEND countermeasures

See Table 20 for a mapping of several of the cybersecurity countermeasures mentioned in this advisory.

New users can save on the latest language-learning tech with a one-year subscription to Rosetta Stone Sapphire at a big discount.

(via Cult of Mac - Your source for the latest Apple news, rumors, analysis, reviews, how-tos and deals.)

• The profile backup mechanism has been enabled by default for all desktop platforms in Nightly, as well as Beta! The current plan is to have this ride out to Firefox 151 for Windows, macOS and Linux on May 18th!
  • This feature, when enabled, will create a copy of your profile data in the background and store it in a single file on your file system that you can restore from.
  • You will be able to manage this feature in Settings under Sync (for now)
    • 
  • You can read more about the feature here
• As followups to the recent addition to the WebExtension tabs API to support the new SplitView tabs feature, tabs.group() and tabs.ungroup() have been fixed to work correctly with split view tabs, and fixed split views being prepended instead of appended to tab groups when adopted into a new window – Bug 2029099 / Bug 2029534
• Adaptive autofill has been enabled on Nightly.
  • Previously, autofill only completed domains (e.g. typing red autofilled reddit.com). Now it can also complete full URLs for pages you visit often (e.g. red → reddit.com/r/firefox), learning from what you actually click in the address bar. If a suggestion isn’t helpful, you can now dismiss it so autofill learns what not to show you too.
    • If you run into issues or have feedback, you can file a bug here!
• Markus Stange [:mstange] implemented dynamic toolbar on top in RDM (#1978145), but also implemented some static skeleton UI so it’s closer to what we actually have in Firefox for Android
  • dynamic toolbar is behind a pref: devtools.responsive.dynamicToolbar.enabled
  • it can be put on top by setting devtools.responsive.dynamicToolbar.onTop, otherwise it’s at the bottom
  • 

Friends of the Firefox team

Resolved bugs (excluding employees)

Script to find new contributors from bug list

Volunteers that fixed more than one bug

• Amin Amir
• aoia7rz7l
• Chukwuka Rosemary
• DrSeed
• Frédéric Wang Nélar
• japandi
• John Iweh
• jonathancabera
• Josh Aas
• Keji Bakare
• kofoworola shonuyi
• konyhéa
• liz
• Mathew Hodson
• Okhuomon Ajayi
• Oluwatobi
• ROSHAAN
• Sam Johnson

New contributors (🌟 = first patch)

•  Anthony Mclamb: Disable the legacy Edge migrator
•  Amin Amir
  • 🌟Fix browsingContext.sys.mjs to assign to #contextCreatedHandled instead of contextCreatedHandled
  • Fix missing WITHOUT ROWID SQLite performance optimization in SERPCategorization.sys.mjs
  • 🌟 Amine Zroual: Omitted maxResults property not handled correctly in getRecentlyClosed
• any1here: install_sig_alt_stack incorrectly checks mmap’s return value
• 🌟 Armin Ulrich: Fix MessageHandlerRegistry.sys.mjs calling getExistingMessageHandler with an unused second argument
• japandi
  • Cannot remove amazon.com from top sites list
  • The height of the pinned tabs area should be responsive to the number of pins
  • Use cenum for nsIHelperAppLauncherDialog reason constants to enable better typescript annotations
• Nathan Johnson [:narjoDev]: Remove browser.display.use_system_colors pref
• DrSeed
  • Firefox shows vertical tabs in new windows despite “Hide tabs and sidebar” setting
  • The “Expand sidebar on hover” option is not kept after the vertical tabs are disabled and enabled again
• Keji Bakare:
  • Split view’s focus-outline is clipped on the right side of left tab
  • White space on the right side of left panel in split view
• 🌟 gotyaoi: Reload toolbar button is active on about:newtab
• Itoro James: [A11y][Keyboard Navigation]Cancelling a note via Keyboard Navigation still saves it
• John Iweh: The notification dot is not displayed if the tab is in a Split View
• 🌟 John Iweh: sidebar-shown attribute remains when sidebar.revamp is false
• 🌟 jonathancabera:
  • The Move tab to Split View option is also displayed for the tabs that are within the Split View
  • A Note with long text (1003 characters) is saved by pressing ENTER even if the “Save” button is disabled
  • Tab group guide line becomes disconnected under certain conditions related to split views in vertical tab mode
• Aloys: Remove logic that forces distribution language packs to be reinstalled when upgrading from Firefoxes older than 67
• liz:
  • Create test to ensure maxRenderCountEstimate is never being set to Infinity in virtual-list component in Fx View
  • Button accessible name does not convey its function: missing topic context (Settings dialog > Topics dialog > buttons Following/Unfollow/Blocked/Unblock)
• Mary cathline: Tab Group Label does not respect touch density in vertical tab bar
• 🌟 Brandon Lucier: Popups opened with window.open give window type normal instead of popup
• karan68: [dialog] New Shortcut dialog needs a label/accessible name
• 🌟 Vector: Button does not programmatically indicate that it opens a dialog (Recent activity section > story card > ••• disclosure > Delete from History button)
• 🌟 Osoble: Update font size and weight for synced tabs device name headers in Firefox View
• konyhéa:
  • Add test for sync admin disabled to browser_syncedtabs_errors_firefoxview.js
  • Check all second paramaters for TestUtils.waitForCondition in Fx View test files
  • Recently Closed Tabs, Tabs from Other Devices, and History pages should have Cmd / Ctrl + Click on a link open the link in the new background tab.
• Noble Chinonso: #shouldHandleEvent in SidebarTreeView.js compares event.keyCode to string values, causing Home/End keys to never be handled
• Pranjali Srivastava: Add a test to verify that the space above tabs is consistent across PB, LWT and sizemode (where appropriate)
• Okhuomon Ajayi:
  • More spacing is needed between the tab note icon and the close icon on the tab
  • The tabs in vertical mode collapsed state are positioned differently in Split View
  • Keep vertical split view tabs stacked vertically even when the sidebar is expanded when expand on hover is enabled
  • Vertical split view tabs can be too big or small when tabs are overflowing
• 🌟 Rishan: Fix duplicated arrow function in browser_history_sidebar.js
• Chukwuka Rosemary:
  • “Forget About This Site” context menu option missing from Firefox View history
  • Long strings are not displayed properly on the about:opentabs page search filed
  • Add test for Forget This Site option in Fxview history context menu.
• ROSHAAN:
  • 🌟Tab note background colour is incorrect for default light theme
  •  [win/linux] The splitter between content areas does not match Figma spec
  • Fix typo in OpenInTabsUtils.confirmOpenInTabs()
• Sameeksha: Disclosure button expanded/collapsed state not programmatically defined (Customize button)
• kofoworola shonuyi:
  • 🌟Actually hide or remove sidebar-shown attribute when in fullscreen.
  • Add a test for checking sidebar-shown attribute in fullscreen mode
• 🌟 Sayd Mateen: Page URL is displayed as tab name when page’s contains about:reader?</a></p> <p>

• Oluwatobi:
  • Unable to delete selected history entries from sidebar
  • Incorrect Sidebar button state/tooltip hover text
  • The city name heading level doesn’t follow the correct heading level order
• Nishchay [:nish]: Unable to add tabs to old closed tab groups (tabGroupState.splitViews is undefined)

Project Updates

Add-ons / Web Extensions

Addon Manager & about:addons

• In preparation for the Project Nova restyling of the about:addons page, we have refactored about:addons into separate per-component ES modules, splitting the monolithic aboutaddons.js and aboutaddons.html into 16 dedicated component files under components/ (with no behavior or UI changes) – Bug 2032014
  • NOTE: if you have working on patches with changes to about:addons internals it is very likely you’ll need to rebase and solve merge conflicts hit on top of this refactoring, the internals are still largely the same as before but don’t hesitate to reach out to the Addons team if you have doubts / questions or need help to figure out how to adapt your patch of top of these changes

WebExtensions Framework

• Fixed exportFunction to preserve the constructibility of the wrapped function instead of unconditionally making all exported functions implicitly as constructors – Bug 2033173
  • Thanks to Gregory Pappas for contributing this improvement to the Content Scripts’ Xray Wrappers helpers!
• Fixed a Firefox 151 regression where extension content scripts accessing location.ancestorOrigins caused subsequent page script reads of the same property to fail with “Permission denied”, breaking sites like Gmail – Bug 2034329
  • Thanks to Simon Farre for promptly investigating and fixing this recent regression!

WebExtension APIs

• Updated sessions.getRecentlyClosed() to remove the hardcoded cap when maxResults is omitted – Bug 1392125
  • Shoutout to Amine Zroual for contributing this enhancement to the sessions WebExtensions API!

DevTools

• Artem Manushenkov fixed an issue where autosuggestion popup was removing overridden indicators from properties in the Inspector (#1983408)
• Andrea Marchesini [:baku] fix DevTools cookie header serialization for long cookies, which could lead to cookies not being visible in Netmonitor (#2031299)
• Julian Descottes [:jdescottes] fixed a toolbox crash that was happening we couldn’t find a localization file (e.g. when using a language pack on Nightly) (#2028930)
• Nicolas Chevobbe [:nchevobbe] improved @container tooltip so it show the value of variables used in style()(#2030239), has enough contrast in dark mode (#2033782) and contains a link to select the container (#2031688)
  • 
• Hubert Boma Manilla (:bomsy) is making good progress on migrating the Console to CodeMirror 6 (#2032758, #2026569)

Fluent

• We’re now at over 72% of our strings being Fluent! Got a component still using .properties? Convert when you can!
• 

Migration Improvements

• Thanks to dao for fixing a recent alignment issue in the migration wizard dropdown
• Thanks to volunteer contributor Anthony Mclamb for his patch that disables the legacy EdgeHTML Edge migrator! Once that finishes rolling out, presuming no surprises, we’ll go ahead and remove the migrator entirely.

New Tab Page

• Nova for New Tab has ridden the trains to Beta! It will be enabled by default, globally, when Firefox 151 goes out to release on May 19th
  • It’s possible that we’ll do a train-hop coupled with an experiment to enable HNT Nova for a few clients a bit earlier.
• Maxx Crawford enabled Nova designs for New Tab, rolling out the updated layout, widgets, and customization panel behind HNT Nova flags.
• Maxx Crawford fixed the Nova content feed to render the intended four‑column layout by correcting CSS grid breakpoints.
• Maxx Crawford resolved a first‑load failure in the Weather widget by fixing init order and fetch timing, eliminating the “Oops” error.
• Maxx Crawford synchronized the Weather toggle between about:preferences#home and the panel via the shared showWeather pref to prevent desync.
• Maxx Crawford updated Nova grid focus order to align tab flow with visual order for keyboard users.
• Maxx Crawford fixed critical UI issues in Lists and Timer widgets covering overflow, controls, and layout stability.
• Maxx Crawford guarded document.dir access in Nova render paths to avoid startup cache worker errors and improve startup stability.
• Rolf added a new normalization method for the inferred interest vector to stabilize topic relevance across sessions.
• Rolf prevented unnecessary content refreshes during Pocket New Tab experiments, reducing jank and bandwidth.
• Sameeksha defined the Customize button’s expanded/collapsed state programmatically using aria-expanded for better a11y.
• liz clarified follow/unfollow/blocked button names with topic context so screen readers announce clear actions.
• Vector marked the Delete from History control as opening a dialog via aria-haspopup=dialog for assistive tech.
• Scott Downe fixed a regression that flipped the Wallpapers pref off, restoring user selections.
• Irene Ni corrected privacy link color and focus styles for contrast and keyboard visibility.
• Reem Hamoui added a wallpaper toggle reset in the Nova customization panel so users can quickly restore default wallpapers without extra steps.
• Reem Hamoui fixed the Customize pencil button to match the Nova spec, aligning placement and iconography for visual consistency.
• Dre updated the ‘Fresh new’ wallpapers copy to a clearer, localized message for better comprehension.
• Irene Ni fixed Nova privacy link color and focus styles to meet contrast and focus ring guidelines, improving accessibility on New Tab.
• Irene Ni adjusted Sponsored tile character limits to prevent truncation/overflow, yielding cleaner titles across grid and wide tiles.
• Scott Downe fixed a regression that flipped the Wallpapers user pref to false, restoring wallpapers for affected users and preventing unintended disablement.
• Reem Hamoui hooked the wallpaper check into the new toggle logic so the Customization Panel accurately reflects wallpaper availability and state.
• Irene Ni landed Nova UI updates for the Daily Briefing 3-pack card, improving spacing, type scale, and tap targets.
• Reem Hamoui added a wallpaper toggle reset in the Nova customization panel so users can quickly restore default wallpapers without extra steps.
• Reem Hamoui fixed the Customize pencil button to match the Nova spec, aligning placement and iconography for visual consistency.
• Dre updated the ‘Fresh new’ wallpapers copy to a clearer, localized message for better comprehension.
• Irene Ni fixed Nova privacy link color and focus styles to meet contrast and focus ring guidelines, improving accessibility on New Tab.
• Irene Ni adjusted Sponsored tile character limits to prevent truncation/overflow, yielding cleaner titles across grid and wide tiles.
• Scott Downe fixed a regression that flipped the Wallpapers user pref to false, restoring wallpapers for affected users and preventing unintended disablement.
• Reem Hamoui hooked the wallpaper check into the new toggle logic so the Customization Panel accurately reflects wallpaper availability and state.
• Irene Ni landed Nova UI updates for the Daily Briefing 3-pack card, improving spacing, type scale, and tap targets.

Search and Urlbar

• Marco has fixed a couple of issues with the places databases to try and improve stability. This should help with avoiding users losing bookmarks or favicons.
• Work continues on the new separate search bar to improve the functionality, e.g. allowing middle click to perform a search in a new tab, avoiding performing a search when adding a search engine.
• Work also continues on the new Nova layouts.

Smart Window

• uplifted 10 bugs to 150.0.1 dot release addressing initial user feedback from diary study and Connect
  • jump to bottom of conversation 2028692
  • stop streaming button 2029204
  • back/forward navigation from assistant 2029229
  • dark mode for various chips 2024499
• search engine switching from smart bar 2021973
• Nova styling within smart window 2026794

Storybook/Reusable Components/Acorn Design System

• Dustin converted moz-breadcrumb-group variables into JSON design tokens Bug 2029181 – Convert moz-breadcrumb-group variables into JSON design tokens
• Dustin converted moz-box-* variables into JSON design tokens Bug 2029180 – Convert moz-box-* variables into JSON design tokens
• Dustin converted moz-promo variables to JSON design tokens Bug 2029190 – Convert moz-promo variables into JSON design tokens
• Dustin converted moz-reorderable-list variables to JSON design tokens Bug 2029191 – Convert moz-reorderable-list variables into JSON design tokens
• Dustin converted moz-visual-picker variables to JSON design tokens Bug 2029193 – Convert moz-visual-picker-item variables into JSON design tokens
• Dustin updated browser-shared.css so it passes use-design-tokens Bug 2022985 – Update browser-shared.css so it passes use-design-tokens
• Dustin updated popup.css so it passes use-design-tokens Bug 2022979 – Update popup.css so it passes use-design-tokens
• Jon added opacity tokens and added opacity to use-design-tokens stylelint rule  Bug 1955325 – Create opacity tokens
• Jon converted toolbar design tokens to JSON Bug 2017970 – Convert toolbar design tokens to json
• Anna fixed moz-select with panel-list drop-down size inconsistency Bug 2032365 – Applications Action drop-down menus sometimes have a different size when opened
• Anna fixed issue with the disabled state of moz-radio component Bug 2027123 – moz-radio disabled state cannot be changed while the moz-radio-group is disabled
• Anna updated moz-button and moz-box-button components to prevent label corruption when accesskeys are present and the label changes.   Bug 2022326 – moz-button with accesskey label becomes corrupted when l10nId updates dynamically

UX Fundamentals

• The error pages shown when a server sends back an invalid response header or an unsupported content encoding now display accurate, context-specific messages. The invalid response header page also gained a helpful list of next steps. – 2027209
• In progress: The error page illustrations are being replaced with new artwork, and the system now supports per-illustration size configuration, giving each image the ability to define its own appropriate dimensions. – 2031837

Settings Redesign

• Tim converted settings related to Accessibility page to config-based pane Bug 1968116 – Convert settings related to Accessibility page to config-based settings
• Benjamin converted Privacy & Security page to the config-based pane Bug 1968112 – Convert settings related to Privacy & Security page to config-based settings
• Finn integrated Firefox Labs page into setting-pane config Bug 2021047 – Integrate Firefox Labs page into setting-pane config
• Anna converted Firefox Updates section to config-based prefs Bug 1990961 – Convert Firefox Updates section to config-based prefs
• Mark Kennedy added moz-promo, that is welcoming users to the redesigned settings Bug 2015093 – Add a moz-promo to welcome users to the redesign
  • 
• Anna added possibility to search for actions in the redesigned “Applications” section Bug 2020370 – It’s no longer possible to search for actions in the new “Applications” section
• Anna fixed the Settings navbar layout breakage

Read more of this story at Slashdot.

The announcement, made by Microsoft AI's Superintelligence team, lands roughly a year after the company committed to building purpose-built models internally, and it arrives with an unusual level of specificity about where those models now run: Bing, PowerPoint, OneDrive, Dynamics 365, Excel, GitHub Copilot, and Azure. The message to enterprise buyers — and, implicitly, to OpenAI — is that Microsoft's homegrown models are no longer research projects. They are production infrastructure serving millions of users.

"Each of these enhancements is a step toward the same goal: Microsoft products, powered by Microsoft models," the company wrote in its announcement blog.

How MAI-Image-2.5-Pro and MAI-Voice-2-Flash stake out opposite ends of the AI cost curve

The two new releases occupy opposite ends of what Microsoft calls the quality-speed-cost curve, and the positioning is deliberate. MAI-Image-2.5-Pro targets the premium tier: hero imagery, detailed editing, and precise in-image text rendering — the last of which has long been a notorious weak spot for image generation models. Microsoft priced the model at $5 per million text input tokens, $8 per million image input tokens, and $106 per million image output tokens. The base MAI-Image-2.5 model recently launched at No. 2 for image editing on Arena, the community leaderboard that has become a de facto scoreboard for generative media.

The creative industry appears to be taking notice. Rob Reilly, global chief creative officer at advertising giant WPP, called the Pro model "a strong leap forward for GenMedia tools" in a statement included in Microsoft's announcement, adding that "Microsoft has firmly established itself among the leaders in generative AI."

MAI-Voice-2-Flash goes the other direction. First previewed at Microsoft's Build conference, Flash runs twice as fast as MAI-Voice-2 and costs 32% less, priced at $15 per million characters. It is designed for the unglamorous but enormous market of high-volume voice — call centers, voice agents, and real-time speech applications where latency and cost-per-call matter more than marginal gains in expressiveness. Together, the two models reflect a strategy of building families of models rather than a single flagship, because, as the company put it, a creative studio chasing maximum fidelity has very different needs from a customer service operation handling millions of calls a day.

Microsoft's production metrics show in-house models cutting GPU costs by up to 89%

The model launches are arguably less newsworthy than the deployment metrics Microsoft attached to them — numbers that read like a systematic case for swapping out third-party frontier models across its product portfolio. 

Bing Image Creator now runs entirely on MAI-Image-2.5, end to end, marking the first time the consumer image tool is fully in-house. In PowerPoint, Microsoft says MAI-Image-2.5 reduces GPU costs by up to 84% compared with GPT-Image-2, OpenAI's image model. In OneDrive, where MAI-Image-2.5 is now the default for key image-editing scenarios, the company reports a 26% increase in save rates, roughly 25% lower P95 latency, and 2.5 times greater efficiency under medium-utilization production workloads.

On the voice side, MAI-Voice-2-Flash now powers Dynamics 365 Contact Center — the platform used by customers including T-Mobile and EasyJet — where Microsoft claims GPU cost reductions of up to 89%. The model is also integrated into Azure Voice Live for developers building speech-to-speech agents.

Perhaps the most consequential deployment sits in healthcare. Microsoft's Dragon Copilot, used by 170,000 medical providers and responsible for processing 28 million patient encounters last quarter, now runs on MAI-Transcribe-1.5 for its multilingual workflow across 58 languages. Microsoft says internal evaluations show a 50% relative reduction in both transcription and language-identification error rates across most languages — a meaningful claim in a domain where transcription errors can propagate directly into clinical notes.

Inside the 'hill-climbing' strategy that lets small models beat GPT-5.6 in Excel

In a companion post published the same day, Microsoft detailed the methodology behind these results — what it calls its "hill-climbing machine," an integrated flywheel of data, models, and the product "harness" that surrounds them.

The clearest example is MAI-Code-1-Flash, the lightweight coding model launched in GitHub Copilot in June. Microsoft says the model achieves an approximately 10% higher code accept rate than GPT-5.4 Mini and Claude Haiku 4.5 in VS Code, while using 10% fewer median tokens. Developer retention tells a similar story: users were 6% more likely to return across multiple days than with GPT-5.4 Mini, and 11% more likely than with Claude Haiku 4.5.

Then Microsoft did something more interesting. It took the MAI-Code-1-Flash checkpoint and further trained it inside an Excel reinforcement learning environment, teaching a coding model the tools and workflows of spreadsheet knowledge work. The result, according to production user feedback, is a model on par with GPT-5.6 for the most common Excel tasks — while being small enough to run on Nvidia's older H100 and even A100 GPUs rather than requiring the latest-generation accelerators.

That hardware detail deserves emphasis. Every major AI company is fighting for allocation of cutting-edge chips, and a model that delivers frontier-adjacent quality on two-generation-old silicon fundamentally changes the deployment economics. It also frees the newest hardware — including Microsoft's now-operational GB200 cluster — for training rather than serving.

Satya Nadella's 'frontier diffusion' manifesto redraws the OpenAI relationship

Microsoft CEO Satya Nadella framed the announcements in a lengthy post on X titled "Frontier Diffusion & Control," which functions as something close to a strategic manifesto. "We can now take saturated frontier capabilities and deliver them at scale and at lower cost through models optimized for high-usage products, while continuing to use frontier models for frontier needs," Nadella wrote, adding that Microsoft is "beginning to route traffic across our first-party surfaces to MAI whenever our models match or outperform frontier alternatives."

Translated from executive prose: capabilities that were state-of-the-art a year ago are now table stakes, and Microsoft believes it can replicate them cheaply for the specific, repetitive tasks that dominate real product usage. Why pay frontier prices for a frontier model when a user just wants to reformat a spreadsheet column?

Nadella was careful to note that "frontier models from OpenAI and Anthropic are part of the orchestration system alongside MAI" — but he also articulated a pointed principle of model independence, arguing that a company's evaluations "should continue to hill climb even when any given model has been removed." 

“Keeping the harness, memory, context, and skills outside the model, he argued, is what gives Microsoft control. The subtext is hard to miss. Reuters reported in April that Microsoft’s exclusive license to OpenAI’s technology had been revised into a non-exclusive arrangement, and The Information reported last September that Microsoft had begun incorporating Anthropic models into some products. Wednesday’s announcement completes the triangle: Microsoft as orchestrator, with its partners’ frontier models as interchangeable components and its own models absorbing an ever-larger share of routine traffic.”

Developers cheer cheaper task-specific models while skeptics question Microsoft's track record

The response online captured both the appeal and the skepticism surrounding the strategy. "I love when people use small models for niche tasks," wrote one X user, @mavihsk, responding to Nadella's post. "Why do I have to use the all-knowing model just to change my field in Excel?" Another user, @nabu_lines, distilled the pitch neatly: "cost and performance both improve when you stop overusing the biggest model."

Others were less charitable about Microsoft's execution track record. "Microsoft is the worst when it comes to listening to user feedback," wrote designer @designedbyabin, arguing the company "will lose the AI race because they repeatedly failed to understand user needs." And one user, @tokenoverflow, offered a drier critique of the model-independence pitch: "i want it keep hill climbing after removing microsoft."

The skeptics raise a fair point. Microsoft's self-reported metrics — accept rates, save rates, GPU savings — come from its own internal evaluations, not independent benchmarks, and the company chooses which comparisons to publish.

But the strategy's logic does not depend on any single number. Nadella's framing that software now has "real marginal cost for the first time" explains why Microsoft is obsessive about tokens, GPUs, and serving costs: when AI features run on every keystroke across a billion-user product portfolio, an 84% GPU cost reduction is not an optimization. It is the difference between a viable business and a money pit.

Why Microsoft is turning its internal AI playbook into an Azure product

The final piece of the strategy is that Microsoft is selling the playbook, not just the models. Nadella explicitly positioned the hill-climbing approach as "a template for every other AI native, SaaS, or Enterprise company," and Microsoft is packaging the toolchain through Foundry and what it calls Frontier Tuning — letting enterprises train specialized models against their own proprietary evaluations and reinforcement learning environments. That turns Microsoft's internal cost-cutting exercise into an Azure product, and it gives enterprise customers a reason to run their AI workloads on Microsoft's cloud even if the models themselves come from elsewhere.

The company's emphasis on models trained "on clean, traceable, enterprise-grade data, without distillation from third-party models" serves the same commercial end. In an industry facing mounting scrutiny over training data provenance, Microsoft is betting that enterprise buyers — and courts — will care where model capabilities come from. Microsoft says it is now extending the hill-climbing approach to Copilot Chat, Outlook, and PowerPoint, and both new models are available in public preview through Microsoft Foundry and the MAI Playground. "None of this is an endpoint," the company wrote. "We're just getting started."

Seven years ago, Microsoft bet more than $13 billion that OpenAI would build the future of AI. Wednesday's announcement suggests the company has since learned a cheaper lesson: the future of AI may belong to whoever builds the frontier, but the profits belong to whoever makes it ordinary.

Summary

Successful exploitation of this vulnerability could allow an authenticated attacker to write arbitrary files to restricted system directories outside of the application's intended directory.

The following versions of Rockwell Automation ThinManager are affected:

• ThinManager >=13.0.0|<13.0.7, >=13.1.0|<13.1.5, >=13.2.0|<13.2.4, >=14.0.0|<14.0.2

Background

• Critical Infrastructure Sectors: Chemical, Critical Manufacturing, Energy, Food and Agriculture, Water and Wastewater
• Countries/Areas Deployed: Worldwide
• Company Headquarters Location: United States

Vulnerabilities

Acknowledgments

• Rockwell Automation reported this vulnerability to CISA

Legal Notice and Terms of Use

This product is provided subject to this Notification (https://www.cisa.gov/notification) and this Privacy & Use policy (https://www.cisa.gov/privacy-policy).

Recommended Practices

CISA recommends users take defensive measures to minimize the risk of exploitation of this vulnerability.

Minimize network exposure for all control system devices and/or systems, ensuring they are not accessible from the internet.

Locate control system networks and remote devices behind firewalls and isolating them from business networks.

When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize VPN is only as secure as the connected devices.

CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.

CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov/ics. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.

CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets.

Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov/ics in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.

Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.

CISA also recommends users take the following measures to protect themselves from social engineering attacks:

Do not click web links or open attachments in unsolicited email messages.

Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.

Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.

No known public exploitation specifically targeting this vulnerability has been reported to CISA at this time.

Revision History

• Initial Release Date: 2026-07-14

Legal Notice and Terms of Use

“Our founder and CTO has actually been really pushing to enable our agents in YOLO mode,” Rishi told the audience. That admission comes from a publicly traded data security firm whose business is backing up what he called the most important data in the world.

YOLO mode strips the permission prompt out of agent workflows and lets the agent act on its own. In Rubrik's version, a second AI judges every action in real time against policy in place of a human clicking approve. Rubrik is running the experiment on itself first. Rishi treats autonomy as a settled capability question and an open judgment question. "If you ask the agent to act autonomously, it will," he said. "It's a question that you have internally. Should it?"

Rubrik earned that question the hard way. When Claude Code and Cowork pilots rolled out, the company required every command to run in ask mode so the employee issuing it carried the liability, and the developer pushback filled a single Slack thread 120 messages deep.

"The developers basically are pushing back, and they're like, this is like the iTunes service agreement. I'm just hitting check, check, check, check, check, check, check," Rishi said. "There's no way that I can actually read through this. And it becomes security theater." Roughly 80% of respondents are in the same bind, Rishi said, citing Rubrik Zero Labs research that found monitoring and approving agent actions takes more time than the agents save. The State of the Agent, the April report behind that figure, surveyed more than 1,600 IT and security leaders.

SAGE is the reason Rubrik trusts the bet. Short for Semantic AI Governance Engine, SAGE is the arbitration layer inside Rubrik Agent Cloud that watches every action an agent takes and reads the semantic intent behind it, then rules the action in or out against policies written in natural language. "We took what people said was human in the loop, a good idea, and we replaced it with AI in the loop," Rishi said, describing the pitch to security chiefs he characterized as skittish about non-deterministic systems.

Security approval, not cost, blocks AI ROI

Rishi’s path to Rubrik ran through Predibase, the generative AI infrastructure startup he co-founded and ran as CEO until Rubrik agreed to acquire it in June 2025. Before that, he led ML product at Google on the team that became Vertex AI, served as Kaggle's first product manager as it grew from about one million to ten million users, and holds bachelor's and master's degrees in computer science from Harvard.

Over roughly his first three and a half months at Rubrik, Rishi set up 200 customer conversations with IT and security leaders across a customer base that looks like the Global 2000, asking open-ended questions about cost, latency, performance, and orchestration. "Pretty consistently, what I heard through all of those conversations was that all of those are pretty secondary," he said. "The main challenge is actually, how do I get this approved from a security and risk standpoint? I'm concerned about all the different things that could go wrong. Actually, I felt like that was one of the biggest things constraining ROI."

VentureBeat Pulse research presented on the Transform stage earlier in the day confirms the gap Rishi kept hearing. Two-thirds of enterprises, 66%, already allow or are actively building toward production deployment with zero human review, yet only 5% fully trust the automated evaluations that would make that decision.

One AI reading what the rulebook can't

Rubrik's own policies exposed why written rules fail as enforcement. One internal rule states that agents should respect Rubrik's customer data use policy, which sounds enforceable until someone tries. "Rubrik's customer data use policy is like a three-page document of legal text," Rishi said. "I have no idea how to write that in there as a rule." Asked on stage how a team of AI infrastructure people took on a problem that security engineers own, Rishi answered, "with a lot of naivety and innocence, honestly." His team bet that models good at understanding language could police other models, and SAGE became the answer.

The case for putting a model in the judgment seat comes down to precision. A rule like "agents should not be able to edit revenue fields in Salesforce" fails in conventional tooling because Salesforce does not delineate which fields count as revenue, Rishi explained, so administrators fall back on approving every Salesforce action by hand. SAGE reads the intent instead and acts as a judge, carrying organizational context, which can tell a benign lookup from the edit the policy prohibits.

Keeping the judge small is what makes the economics work. SAGE runs on a small language model that Rishi said operates at an order of magnitude lower cost and latency than a frontier LLM. "If I told you, don't worry, you're gonna be secure and governed, but I'm gonna double your cost and latency, you would tell me to get out of the room," Rishi said.

When Rishi asked who in the audience had worried about token consumption over the past year, half the hands went up. "And I guess the other half is probably just too lazy to raise their hand," he said.

SAGE is an aggregation of judges based on parameter-efficient fine-tuning that Rubrik uses to take on task-specific variants of a base model with shared organizational context. One judge watches for tool-use hallucinations while another suppresses PII before it can leave, each running as its own enforceable policy. Security and GRC teams have started writing financial rules into the same layer, including one internal policy barring AI spend on personal projects.

The lethal trifecta

Asked which attacks worry him most, Rishi pointed at the lethal trifecta, the term security researcher Simon Willison coined in June 2025 for an agent that holds private data while taking in content nobody vetted, with a channel to send what it finds to the outside world. The danger, according to Rishi, is what happens when individually legitimate permissions stack. An agent granted Salesforce access and email access on an employee's credentials has done nothing wrong yet, with yet being the operative word. "A very simple example is that an agent can start pulling data from Salesforce and then decide to accidentally leak and exfiltrate that out via an email," he told the audience. A financial services company he met the morning of the session made the point for him, telling Rishi that none of the individual permissions are bad on their own and the agent needs every one of them to do its job. "It should have permission to each of those systems, but it's the combination that ends up becoming really destructive," Rishi said.

Traditional identity and access management never priced in that combination because it relied on the judgment of the employee holding the credentials, Rishi argued, and agents supply none. "I can tell you the number of times Claude Code has tried to leak some of our sensitive source code to a public GitHub repository is incredibly high," he said. Cutting agents off from public resources entirely would defeat their purpose, which returns the problem to adjudicating intent in context rather than revoking access.

A separate VentureBeat June Pulse survey of 107 qualified enterprise respondents maps the blast radius of exactly this pattern. On the Transform stage that morning, VentureBeat research reported that 69% of companies run credential sharing somewhere in their agent fleet. Companies with shared credentials anywhere got hit more often, reporting a security incident or near-miss at a 63.5% rate (47 of 74), against 40.9% (9 of 22) where every agent carries its own scoped identity.

The attacks no single turn reveals

Rubrik Agent Cloud reached general availability in February, though not everything Rishi described ships in it yet. Backtesting is just starting to roll out. The feature replays an organization's historical agent actions and tool calls against a new policy, showing where the policy would have stepped in and where an action would have sailed through uncaught, with policy edits applied in real time. Rishi called that archive one of the most valuable data troves an enterprise holds.

Real-time detection and blocking turn out to be the entry point rather than the whole product. Some attacks never trip a single-action rule. "No individual turn of the conversation was problematic, but if you took the session as a full trace, that ended up being problematic," Rishi said. Agent Cloud runs batch analysis across entire session traces every hour or every day and surfaces what Rubrik calls insights, the problems no individual guardrail caught. The same Zero Labs report found that 88% say they lack the ability to roll back agent actions without system disruption, a recovery gap that sits squarely in Rubrik's original line of business.

A skeptical CISO will ask the question the fireside did not answer. SAGE is a non-deterministic model policing other non-deterministic models, and Rishi offered no false positive or false negative rate for the judge itself. The closest thing the architecture gives to an answer is auditability, since backtesting and the batch insights both leave a human-reviewable trail of each call SAGE made and whatever got past it. Who watches the watcher, for now, is a trail of receipts rather than a benchmark. Until that benchmark exists, AI in the loop stays an operational wager rather than a quantified control.

Three questions fall out of the session for security teams. How many of the guardrails now in production depend on a human clicking approve, and what happens to that workload as agent count grows? Does anything in the stack enforce semantic intent, or is it all allow and deny lists? And can the team backtest agent behavior against a new policy, then unwind a multi-turn session without taking systems down?

Rishi's timing has a market behind it. In the same VentureBeat research, 82% of enterprises still name their primary AI provider's built-in guardrails and cloud controls as their main agent security layer, and 59% plan to adopt, add, or replace agent security tooling within the next 12 months. Only 12% include an agent-identity product in what they are considering, even with credential sharing still the norm. Every CISO at that Anthropic roundtable had a policy document and no enforcement mechanism, and Rubrik built a product for the space between the two. YOLO mode is the bet that an AI watching other AIs can finally make the policies real.

Executive summary 

A group of Russian state-supported cyber actors has been targeting and compromising various Western government and commercial organizations using the Zimbra Collaboration Suite (ZCS) software since at least July 2025. The Russian state-supported advanced persistent threat (APT) group’s activity is tracked in the cybersecurity community under several names (see Cybersecurity industry tracking), primarily as “LAUNDRY BEAR,” a name initially coined by the Netherlands General Intelligence and Security Service (AIVD) and Defence Intelligence and Security Service (MIVD) [1].

LAUNDRY BEAR’s targeting is almost certainly to gather sensitive information for the Russian Federation, with these actors primarily focusing on the covert acquisition of email data. Previous campaigns indicated LAUNDRY BEAR relied on unsophisticated initial access techniques—including password spraying, phishing, and pass-the-cookie—allowing the group to successfully run high-volume operations. The latest campaign targeting ZCS uses a novel exploit that was a zero-day vulnerability when first exploited and continues to be successfully exploited. The vulnerability, Common Vulnerabilities and Exposures (CVE) CVE-2025-66376, was patched in November 2025. This demonstrates LAUNDRY BEAR’s intent and ability to deploy increasingly sophisticated technical capabilities.

Unlike traditional phishing campaigns that persuade a user into taking an action, such as clicking a link or opening a file, LAUNDRY BEAR’s latest campaign leverages a view-based exploit that only requires a user to view a malicious email within a vulnerable version of the webmail service. Once viewed, the exploit attempts to exfiltrate the victim’s last 90 days of email communications, the organization email directory (i.e., Global Address List [GAL]), and other sensitive information to servers controlled by LAUNDRY BEAR. The exploit also attempts to establish persistent access to victim accounts through a variety of means as detailed in the Persistence and credential access section.

This Cybersecurity Advisory (CSA) warns of this ongoing malicious threat activity and urges organizations to update their vulnerable software and implement additional mitigations to thwart these Russian state-supported actors’ continued success. The CSA is being released by the following authoring and co-sealing agencies:

• United States National Security Agency (NSA)
• United States Federal Bureau of Investigation (FBI)
• Netherlands Defence Intelligence and Security Service (MIVD)
• Netherlands General Intelligence and Security Service (AIVD)
• United States Cybersecurity and Infrastructure Security Agency (CISA)
• United States Defense Counterintelligence and Security Agency (DCSA)
• United States Department of Defense Cyber Crime Center (DC3)
• United States Department of the Treasury
• United States Naval Criminal Investigative Service (NCIS)
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Communications Security Establishment Canada’s (CSE’s) Canadian Centre for Cyber Security (Cyber Centre)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• United Kingdom National Cyber Security Centre (NCSC-UK)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)¹
• Danish Defence Intelligence Service (DDIS)²
• Estonian Foreign Intelligence Service (EFIS)³
• Finnish Defence Intelligence (FDI)⁴
• Finnish Security and Intelligence Service (SUPO)⁵
• French General Directorate for Internal Security (DGSI)⁶
• French National Cybersecurity Agency (ANSSI)⁷
• Italian External Intelligence and Security Agency (AISE)⁸
• Italian Internal Intelligence and Security Agency (AISI)⁹
• Security and Intelligence Service of the Republic of Moldova (SIS RM)¹⁰
• Polish Foreign Intelligence Agency (AW)¹¹
• The Military Counterintelligence Service of Poland (SKW)¹²
• Spain National Intelligence Centre (CNI)¹³
• Sweden National Cyber Security Centre (NCSC-SE)¹⁴

The authoring agencies urge any organizations using ZCS to implement the recommendations listed within the Mitigations section of this advisory to reduce the risk associated with this activity. This CSA also includes specific remediations for organizations to implement if they discover the presence of the listed Indicators of compromise (IOCs).  

As more organizations update their ZCS software based on this CSA, LAUNDRY BEAR may discontinue the current campaign exploiting this vulnerability; however, based on the success of this and previous campaigns, it is very likely that the group will continue to target ZCS and other email systems used by organizations in Western countries. The actors will almost certainly continue to rely on email to engage potential victims by exploiting novel vulnerabilities and, when necessary, use social engineering techniques to assist with their efforts. The authoring agencies recommend organizations regularly update their mail service software and continuously monitor their email systems and emails for malicious activity.

For a downloadable list of IOCs, see:

• AA26-204A.stix.xml (STIX XML)
• AA26-204A.stix.json (STIX JSON)

Cybersecurity industry tracking

The cybersecurity industry provides overlapping cyber threat intelligence, indicators of compromise (IOCs), and mitigation recommendations related to these Russian state-supported cyber actors. While not exhaustive, the following are threat group names commonly used for these actors within the cybersecurity community:

• LAUNDRY BEAR
• Void Blizzard [2]
• CL-STA-1114 [3]
• TA488 (formerly UNK_PitStop) [4]

Note: Cybersecurity companies have different methods of tracking and attributing cyber actors, and this may not be a 1:1 correlation to the U.S. government’s understanding for all activity related to these groupings.

Background

Public advisories from Netherlands General Intelligence and Security Service (AIVD), Netherlands Defence Intelligence and Security Service (MIVD), and Microsoft highlighted these Russian state-supported advanced persistent threat (APT) actors in May 2025, calling them LAUNDRY BEAR and Void Blizzard respectively [1] [2]. Both advisories assessed that the group was engaged in malicious cyber activity as early as April 2024.  

The May 2025 advisories highlighted a cluster of activity targeting cloud-based email environments, including Microsoft Exchange in particular, and abusing legitimate APIs to perform data exfiltration in bulk [T1114.002]. The group relied on unsophisticated means of initial access, including procuring stolen credentials on criminal marketplaces [T1078], and using social engineering techniques to lure targets into interacting with a malicious site masquerading as a legitimate one. As of April 2025, one of these sites resembled a European Defence & Security Summit registration portal that required registrants to sign in to their Microsoft account to view. Once a user entered their Microsoft credentials into this malicious site, LAUNDRY BEAR’s modified version of the open source adversary emulation toolkit, Evilginx, intercepted the user’s credentials. LAUNDRY BEAR then used this authentication data, including passwords and session tokens, to access the compromised account and conduct mass email exfiltration, as well as harvest other information. This method of compromise is commonly known as an adversary-in-the-middle (AiTM) technique [T1557].  

Beginning around July 2025, LAUNDRY BEAR shifted toward a more technical method of email compromise, highlighting their continued efforts to covertly acquire email communications from a variety of Western organizations of interest and deliver them to the Russian Federation. Using a custom-developed capability [T1587.001] named “Улей” or “Ulej” (Russian for beehive), LAUNDRY BEAR successfully targeted and exfiltrated sensitive user information from organizations who use the Zimbra Collaboration Suite (ZCS) product [T1114]. Data LAUNDRY BEAR attempted to exfiltrate from compromised accounts included:

• Last 90 days of emails,
• Email address,
• Password [T1589.001],
• Global Address List (GAL) [T1087],
• Two-factor authentication (2FA) tokens, and
• Newly-created Application Passcode [T1098].

The covert and persistent nature of this activity, along with the absence of any known financial extortion, almost certainly indicates this group’s involvement in espionage activities with Russian government backing. Additionally, extensive Ukrainian targeting, prior to use against U.S. and other NATO allies, outlines an increasing trend within Russian cyber threat groups to target Ukrainian users first—both as a priority target and as a testbench for malicious cyber techniques before broader global deployment.

Targeting details

LAUNDRY BEAR has targeted and compromised users in various organizations, including those associated with:

• the Defense Industrial Base (DIB),  
• the federal and local government,
• education,
• energy,
• law enforcement,  
• media,  
• non-governmental organizations, and
• technology.

Technical details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise framework, version 19. This advisory also uses MITRE D3FEND^TM version 1.4.0¹⁵. See Appendix A and Appendix B for tables of the activity mapped to MITRE ATT&CK and D3FEND tactics, techniques, and countermeasures.

Ulej is a novel data exfiltration and aggregation capability, that currently (as of the publication of this report) supports a campaign specifically targeting users of ZCS webmail servers. This capability is used to exploit CVE-2025-66376 [Common Weakness Enumeration (CWE) CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')], but likely could be adapted to exploit other vulnerabilities. It exfiltrates emails and other sensitive user data from a victim’s system immediately after exploitation and stores the data in an actor-controlled unattributable virtual private server (VPS) [T1074.002] running LAUNDRY BEAR’s “Flowerbed” collection framework. The collected data is almost certainly further exfiltrated to internal network resources for review and long-term retention.

Reconnaissance

LAUNDRY BEAR uses the Ulej capability to exploit the CVE-2025-66376 vulnerability in organizations using ZCS. This campaign’s targeted victimology and limited exploitation capabilities likely indicate this group manually identifies and targets the victim organizations. LAUNDRY BEAR likely identifies organizations with public-facing Zimbra infrastructure by port scanning [T1595] and fingerprinting datasets easily procured through various commercial vendors [T1596.005].  

After identifying a target organization, the group likely compiles email addresses for individual users to target with the exploit [T1589.002] from datasets offered by commercial vendors [T1597.002], open source intelligence [T1593], or previously exfiltrated data [T1597].  

Resource development

The actors procure VPSs from a variety of providers [T1583.003], including those with Know Your Customer (KYC) requirements, and often use fabricated identities. LAUNDRY BEAR primarily uses Mullvad VPN [T1583] when interacting with these servers, further demonstrating the group’s intent to mask their identity and maintain operations security (OPSEC). After the server is provisioned, an automated process deploys the Docker containers necessary for Ulej’s Flowerbed framework [T1608], which then receives and aggregates the data Ulej exfiltrates. These servers are typically only used for 7-60 days before moving to new infrastructure.

Flowerbed framework

Flowerbed is a Python project that uses Docker for containerization. The project includes four different Docker containers:

• Catcher,
• Certbot,
• Nginx, and
• Gardener.

Catcher acts as both a DNS and HTTP server to receive and aggregate exfiltrated victim information [T1048]. For additional information on Catcher, refer to the Exfiltration section of this advisory. Flowerbed’s next container, Certbot, is based on one of the official Certbot containers, which allows for automated generation of Let’s Encrypt certificates using DNS challenges through Cloudflare. This certificate can then be used by the Nginx container, which serves as an HTTPS reverse proxy for Catcher, enabling Flowerbed to disguise some of its exfiltration activity through an encrypted communications channel [T1048.002]. The Nginx reverse proxy also validates that the Server Name Indicator (SNI) value contains “*.i.*” prior to forwarding the traffic to Catcher. If the SNI does not contain that string, the Nginx server returns a 444 error to the client. This is likely an attempt to reject non-Ulej connections. Finally, the Gardener container functions as a health check for the Catcher service. Gardener is a simple Python script that validates Catcher correctly receives and processes data.

The simplistic Flowerbed codebase has indications that artificial intelligence (AI) played a role in its development. This highlights how AI is increasingly being used to develop malicious capabilities [T1588.007]. The dependence on AI for a simple capability, such as Flowerbed, alongside a previous reliance on open source capabilities, such as Evilginx2 [T1588.002], likely indicates a lack of advanced technical knowledge within LAUNDRY BEAR, especially in relation to true software development capabilities.

Initial access

To gain initial access, LAUNDRY BEAR sends an email containing a malicious JavaScript payload to the target [T1566]. Through exploitation of CVE-2025-66376, this JavaScript payload is immediately executed once the user views the malicious email [T1203], such as the one shown in Figure 1, in the ZCS webmail platform. Since at least November 2025, LAUNDRY BEAR began sending these phishing emails from victim infrastructure through compromised accounts [T1199], as shown in the email metadata in Figure 2. These compromised accounts were likely previous victims of this, or another LAUNDRY BEAR, campaign and their use is intended to further obfuscate and frustrate anti-phishing tools and training.

According to the National Vulnerability Database (NVD), CVE-2025-66376 was initially published on 5 January 2026. This vulnerability allows for execution of a JavaScript payload included in email content due to improper sanitization of Cascading Style Sheet’s (CSS) @import directives within an email [5]. Because the activity attributed to this campaign began in July 2025—months before Synacor released a patch and the CVE was published—the payload initially exploited a zero-day vulnerability at that time [T1587.004].  

Utilization of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability.

Hidden in LAUNDRY BEAR’s email is a Base64 encoded payload within the “onload” field of a Scalable Vector Graphics (SVG) element [T1027.017], as shown in Figure 3. Leading up to the inclusion of this payload in the SVG element are various instances of @import directives, as required to leverage CVE-2025-66376. This payload includes an XOR encrypted final script encoded in a Base64 inner payload (see Figure 3) [T1027.013]. The outer payload decodes and decrypts the inner payload using an XOR function and a hardcoded key and then executes the script contained within the inner payload containing the collection and exfiltration logic. By changing the key used for the XOR encryption of the inner payload or adding additional @import directives with non-functional code [T1027.010], LAUNDRY BEAR can easily generate new payloads that bypass basic threat detection signatures. This malicious payload attempts to collect and exfiltrate information in 12 asynchronous stages [T1119]. The stages in order of appearance within the payload are as follows:

1. sendStartPing,
2. gather_email,
3. gather_environment,
4. gather_2fa_codes,
5. gather_app_password,
6. gather_device_status,
7. gather_oauth_consumers,
8. gather_autocomplete_password,
9. enable_mail_protocols,
10. gather_gal,
11. sendArchives, and
12. sendFinishPing. 

Use of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability [T1587].

Persistence and credential access

To establish sustained persistence into the victim’s email account, the script attempts to modify account preferences and collect authentication information. Any collected credentials are later exfiltrated, as further described in the Exfiltration section below. Other campaigns attributed to LAUNDRY BEAR also demonstrated the group’s ability to circumvent multi-factor authentication through session token replay [T1550.004], and the Zimbra campaign follows a similar trend.

The script used in this campaign tries to discover the victim’s email address during the gather_email stage [T1087]. The script searches for this email address in two ways. First, it examines the batchInfoResponse variable, which an HTML script element on the webpage can define, for an email address. Even if the script finds an email address there, it also checks whether it acquired a Cross-Site Request Forgery (CSRF) token as described later in the Collection section of this advisory. If so, the script uses the “GetIdentitiesRequest” Simple Object Access Protocol (SOAP) command under the “ZimbraAccount” namespace to determine the victim’s email address [T1185] and then exfiltrates it. However, if the script does not have a CSRF token or the SOAP request fails, the script exfiltrates the email value recovered from the first method instead. If both attempts fail to capture the victim’s email, the script sends a JavaScript Object Notation (JSON) payload with a key of “email” and value of null over HTTPS and does not attempt DNS exfiltration.

During the gather_autocomplete_password stage, the script attempts to collect the victim’s saved password via the autocomplete feature of the victim’s password manager. The script injects two HTML div elements requesting login credentials onto the page outside of the victim’s view, as shown in Figure 4 and Figure 5. After waiting five seconds, the script then attempts to extract the password provided automatically by the password manager from the input element shown in Figure 4. If there is no value in that input field, it checks the password input field shown in Figure 5. If neither input field contains a value, a JSON payload with a key of “autocomplete_password” and value of null is sent over HTTPS and DNS exfiltration is not attempted.

LAUNDRY BEAR almost certainly relies on a mail client using the Internet Message Access Protocol (IMAP) for persistent access to the victim’s mailbox. During the enable_mail_protocols stage, a SOAP request leveraging the “ModifyPrefsRequest” command under the “ZimbraAccount” namespace is sent. This request attempts to set the “zimbraPrefImapEnabled” preference to TRUE. While the default setting for “zimbraPrefImapEnabled” is not well documented, this action is almost certainly intended to ensure that IMAP access to the victim’s mailbox is enabled.

ZCS does not support 2FA for some mail clients, including IMAP. To support users who rely on IMAP clients, ZCS allows for the generation of Application Passcodes. Application Passcodes are randomly generated passwords that can be used for clients that cannot support the normal 2FA process to authenticate. During the gather_app_password stage, the script makes a SOAP request using the “CreateAppSpecificPasswordRequest” command under the “ZimbraAccount” namespace to create a new Application Passcode [T1556.006]. The SOAP request uses “ZimbraWeb” as the name of the application.

Additionally, the script also attempts to collect 2FA tokens. During the gather_2fa_codes stage, the script makes a SOAP request using the “GetScratchCodesRequest” command under the “ZimbraAccount” namespace. The script then attempts to exfiltrate any non-null 2FA codes collected this way. The number of codes can vary, and each code is exfiltrated to Flowerbed individually.

Collection

As demonstrated in the Persistence and credential access section, this script relies heavily on SOAP requests to collect victim information. To make these requests, the script aims to acquire the victim’s current CSRF token, which it attempts to access within the webpage’s local storage using localStorage.getItem("csrfToken"). If the script is unable to acquire this CSRF token, it will be unable to make any SOAP requests. In addition to the SOAP commands documented in the Persistence and credential access section, other SOAP commands executed to collect victim information are shown in Table 1.

The script attempts to collect the victim’s GAL through brute force by searching for each two-character combination from a character set of “abcdefghijklmnopqrstuvwxyz1234567890.-_”. These queries are conducted using 20 batches of SOAP requests with 77 “SearchGalRequest” SOAP commands in each batch except for the last request containing only 58.

During the gather_environment stage, the script attempts to determine which type of ZCS webmail client the victim is using. The script checks the user’s current URL to determine the client type being used, checking for certain indicators (shown in Table 2) to determine the client type. The corresponding value is then used as the payload when exfiltrating the client type.

As part of collection, the script attempts to harvest any emails not marked as “junk” from the last 90 days from the victim’s account. Emails are collected daily by an HTTP GET request to the URL path, “/home/~/?fmt=tgz&meta=0&query=date:-{DAY_OFFSET}d AND (not in:junk)”. The {DAY_OFFSET} value would be between 0 and 89 representing how many days ago the email was sent or received. To prevent redundant collection and exfiltration of emails, a variable with a name based on the email date being queried, using a format of zd_comp_YYYY-MM-DD, and value of true, is saved to the window.top.localStorage property. This variable is saved regardless of whether the email is successfully exfiltrated.  

According to Mozilla documentation, if the user is not in a private browsing session, any data stored to localStorage does not typically expire. This means that if the user happens to execute the script again from the same computer, the script avoids attempting to re-exfiltrate previously captured emails. However, the script always attempts to pull any emails with a {DAY_OFFSET} of zero. In other words, the script always pulls emails sent or received the same day it is run. After email results are returned from the query for each day of email activity, those results are then passed to Flowerbed as described in the Exfiltration section.

The script also provides LAUNDRY BEAR with telemetry on any errors that occur during the collection process. This is accomplished by executing any collection or exfiltration code through helper functions that contain error handling logic. If an error occurs, a payload containing information on the error itself, the context of the error happening, and the stage in which the error occurred is sent to Flowerbed as described in the Exfiltration section below. For cases where the error occurs within a SOAP request, “:api” is concatenated to the stage value in the payload. If an error occurs during the batch SOAP requests that occur when collecting the GAL of the victim, the stage value will use a format of gather_gal:{VAL}:api. The {VAL} placeholder indicates which batch request, a number from 0 to 19, the error occurred in. Errors that occur during the password autocomplete interception process will use “gather_autocomplete_password:dom” for the stage value. Finally, if an error occurs when attempting to collect or exfiltrate a specific day’s emails, the stage will include which day the error occurred on, using the previously defined placeholder {DAY_OFFSET}, with a format of sendArchive:day-{DAY_OFFSET}.

Exfiltration

At the end of each stage in the collection process, the script attempts to exfiltrate acquired information to Flowerbed. The script primarily relies on two forms of data exfiltration: DNS [T1048.003] and HTTPS. Some information is exfiltrated over both the DNS and HTTPS channels.

Prior to exfiltration, a randomized 10- or 11-character alphanumeric string is generated as an identifier for the victim. This identifier is included in the URL of both the DNS- and HTTPS-based exfiltration.  

DNS exfiltration

DNS exfiltration occurs through DNS A record queries. To ensure data exfiltrated through DNS is not corrupted when traversing through non-actor-controlled DNS infrastructure, Ulej maintains compliance with RFC 1035, Domain Names - Implementation and Specification, specifically accounting for the case insensitivity and subdomain length requirements. Base32 encoding is used to create a case-insensitive payload. Once the payload is encoded, a period (“.”) is added every 60 characters to ensure each subdomain is under 63 characters long. The script then creates a new image object sourced from a URL with the scheme defined in Figure 6. Any traffic involving DNS exfiltration will have “d-“ prefixing the victim identifier, and the subdomain immediately following indicates the type of information being exfiltrated.

When the script generates an image object, the browser tries to retrieve the complete domain of the URL specified as the source of the image. This triggers a DNS request sent to the actor-controlled server and processed by Flowerbed. Table 3 lists both the information exfiltrated via DNS and their corresponding data type identifiers in the DNS queries.  

HTTPS exfiltration

Any information exfiltrated via DNS is also exfiltrated through HTTPS, as well as additional data including email content, contacts, attachments, and error logging information. By using Let’s Encrypt certificates, this group can quickly deploy new infrastructure and leverage encrypted HTTPS communications with valid server certificates when exfiltrating information from the victim’s environment. The HTTPS exfiltration capability only uses two HTTP content types, defined in Table 4. Traffic associated with HTTPS exfiltration will use the URL scheme shown in Figure 7.  

Some of the data transmitted via HTTPS uses the standard JSON content type format. The script includes the information in a POST request to actor-controlled infrastructure.  

Table 5 provides a summary of the JSON-based exfiltration.

The script transmits all HTTPS exfiltration not identified in Table 5 using the Octet-Stream content type as binary data. The POST requests for this method include a filename in the “X-Filename” header. Traditionally, developers use headers prefixed with “X-” to denote custom headers that do not follow a defined standard. The purpose of including this header remains unclear since the Catcher capability ignores the provided filename when saving the data. Table 6 summarizes the data exfiltrated in this format.

The script sends all exfiltrated data identified in Table 6 to the Catcher service exactly as received from the SOAP request in a JSON payload, except for email exfiltration. For email exfiltration, the script sends it as a GZIP compressed archive [T1560]. Although most of the exfiltration consists of valid JSON, the script still attempts to exfiltrate all information identified in Table 6 using the application/octet-stream content typing rather than application/json.

At the beginning and end of the collection and exfiltration activity, during the sendStartPing and sendFinishPing stages respectively, the script submits a POST request with a JSON payload to indicate that the script is starting or finishing execution. Throughout execution, the script also logs error events and send the logs using similar JSON payloads. The script sends the JSON in a POST request to the URL documented in Figure 2, using a URL path of “/v/p” and with a “subtype” key that shows which type of action it logged (start, finish, or error).  

Catcher

Ulej exfiltrates information to Flowerbed to be handled by a service named Catcher. Catcher is a containerized Python application, running in Docker as part of Flowerbed, which is detailed in the Resource development section. It receives exfiltrated data and temporarily stores it, enabling its eventual transfer to infrastructure designed for long-term, secure storage.

Catcher acts as an HTTP server over port 8000 and a DNS server on port 53. As described in the Resource development section, the Flowerbed project uses an additional Docker container running an Nginx reverse proxy to enable HTTPS support. This reverse proxy uses a certificate generated by Let’s Encrypt and forwards all traffic with an SNI containing “*.i.*” to port 8000 within the Catcher container.

The DNS service can accept A, AAAA, MX, TXT, and CAA queries. For any MX, AAAA, or CAA queries, the server will always provide an empty response. The system only supports TXT records as needed to process Automatic Certificate Management Environment (ACME) requests, which enable the assignment of Let’s Encrypt certificates. If the server receives an A query, Catcher will always respond with the public IP address of the Flowerbed server.  

However, if a query includes a domain formatted as shown in Figure 6 and Figure 7, the service saves a log file in JSON format to disk containing the following details of the DNS query:

• Time of query,
• Source IP address for query,
• Queried domain, and
• Type of query.

The HTTP server typically responds with OK, except in cases where the path is “pixel.gif” when the response contains a 1x1 gif image with a SHA-256 hash of ef1955ae757c8b966c83248350331bd3a30f658ced11f387f8ebf05ab3368629. Like the DNS service, the HTTP service will only log entries when the domain found in the host header of the request follows the expected formatting as seen in Figure 6 and Figure 7. As the HTTPS exfiltration uses non-standardized binary and JSON-formatted payloads when exfiltrating to Catcher, Catcher will check the content type of the request. If the content type is set to “application/json”, Catcher encodes the data in Base64 and includes it in the JSON log entry written to disk. If the content type is set to any other value, Catcher leaves the Base64 payload in the JSON log entry blank and saves the payload to a separate file with the same filename as the JSON log entry with a “.bin” file extension. An HTTPS exfiltration event causes Catcher to save a JSON formatted log file to disk containing the following information from the HTTP request:

• Time,
• Source IP address,
• Request method,
• Host,
• Path,
• Query string,
• Headers, and
• Base64 payload.

These JSON event log files and binary output files are then initially saved to the directory /root/hits/tmp and later moved to the /root/hits/ready directory once processed. This prevents incomplete files, which are still being uploaded to Catcher, from premature exfiltration from the server. Approximately every 60 seconds, a likely automated workflow establishes a Secure Shell (SSH) connection with the server hosting Flowerbed for a few seconds, almost certainly exfiltrating the data processed by Catcher to non-public-facing infrastructure. The command in Figure 8 also executes hourly to remove all files last modified at least two days ago from the /root/hits/ready directory.

Response strategies

Mitigations

In many cases, by the time an organization identifies a compromise related to this campaign, numerous sensitive and proprietary emails have already been exfiltrated. The significant risk posed by this cyber threat emphasizes the importance for organizations that use ZCS and other similar webmail solutions to take proactive steps to mitigate this risk.

All organizations that use the ZCS webmail service should immediately prioritize ensuring that their ZCS is not running a vulnerable version. A patch for CVE-2025-66376 was released for both 10.1.13 and 10.0.18 versions of ZCS [D3-AH]. If immediate patching is not feasible, organizations should advise employees to use alternative mail clients to access email and avoid using the Classic ZCS webmail client until ZCS is updated to a non-vulnerable version [d3f:Isolate].

System administrators should closely monitor any Internet-connected ZCS or other email systems and the workstations that access those systems and promptly apply available software updates [D3-AH]. Administrators can maintain awareness of active vulnerability exploitation by referencing open source resources, including CISA’s Known Exploited Vulnerabilities Catalog and NCSC-UK’s Responding to active exploitation of vulnerabilities guidance.

Organizations should consider using a third-party authentication service that supports passkeys for authentication to mediate access to ZCS and other services that do not natively support passkeys. By doing so, organizations can work to eliminate the possibility of automated password collection from autocomplete or password reuse [D3-CH]. However, Application Passcodes may still be necessary and should be monitored closely.  

Organizations should implement network monitoring capabilities with collection and short-term retention of packet capture or NetFlow data and maintain log collection and storage [CPG 3.Q]. This will allow organizations to monitor for and identify suspicious network activity [CPG 4.B], such as:

• Significant amounts of outbound data being sent to IPs associated with VPS providers not used by the organization [D3-NTA];
• Frequent DNS queries for a suspicious domain with seemingly random subdomains [D3-DNSTA];
• A sudden spike of connections to a server associated with a recently established domain [D3-NTCD]; and  
• Connections to internal services, such as webmail, from VPN providers frequently leveraged by this group for nefarious activity, such as Mullvad VPN [D3-NTCD].

Additionally, for organizations that can inspect the content of outbound HTTPS connections via break-and-inspect infrastructure, security teams should identify traffic matching the characteristics described in the Exfiltration section of this advisory.

Indicators of compromise (IOCs)

Flowerbed infrastructure

The following indicators have been attributed to use by LAUNDRY BEAR for their campaign targeting ZCS’s webmail service as of the publication of this advisory. (Disclaimer: Due to the frequency of operational structure changes by this group, these indicators are intended solely for historic attribution purposes. Some indicators, such as IPs, compromised emails, and domains, may be outdated, so organizations should check for current activity before acting on these IOCs.) Table 7 provides details about the server infrastructure used to host Flowerbed, and Table 8 lists the corresponding SHA-1 hash values for the Let’s Encrypt certificates used by that infrastructure [D3-IAA].

LAUNDRY BEAR has used the following email addresses to procure resources used for this campaign:

• ivanka.zurabishvili@proton[.]me,
• zmul1@buildandconsulting[.]com,
• garrysmithme@pinmx[.]net, and
• hostingclient@pinmx[.]net.

Phishing distribution

LAUNDRY BEAR primarily relied on ProtonMail for distribution of malicious email. However, as stated above, LAUNDRY BEAR’s more recent efforts likely have shifted to distributing the payload through previous victims.  

The following email addresses have distributed payloads attributed to this campaign:

• c.laurent.ejfa@proton[.]me,
• j.moreau.epsc@proton[.]me,
• liberty.insights@proton[.]me,
• certain email addresses (presumably compromised) at the isofts.kiev[.]ua domain (i.e., ending with @isofts.kiev[.]ua), and
• certain email addresses (presumably compromised) at the navs.edu[.]ua domain (i.e., ending with @navs.edu[.]ua).

Additionally, the following are SHA-256 hashes of email samples containing the malicious payload attributed to this campaign:

• 98df604ecc57f884a2e6ce3266a0013ad64455cac48442c2312cfa4765007aaf,
• 60db9abae75cd8ccc49dd7ea5feb41677566dcd442f12ebc5745ffd2810fb874,
• b1f5beb1175fc5c7d1806a2f0d900eb124c54f0286c5c52b66eea7a6633adb1d, and
• 1517b3caa495f6c4e832df9c75fc94667e3c233773f7fa4e056d5e30e5ead760.

Post-compromise artifacts

Currently, the script does not remove artifacts. This leaves additional opportunities to identify victims of this activity. While emphasis should always be placed on consistent monitoring of network traffic and endpoint activity, there are a variety of persistent artifacts described below that can be used to identify victims of this campaign.

This Ulej capability relies on creating a significant number of SOAP requests to collect account information for exfiltration. ZCS logs from these requests are stored, by default, in the /opt/zimbra/log/mailbox.log file [D3-PA]. A significant amount of SOAP request activity that aligns with what was described in the Persistence and credential access and Collection sections of this advisory could indicate a potential compromise. Specific examples of high-risk SOAP request activity might include:

• Many SearchGalRequest command requests from a single user over a short period of time;
• Use of the CreateAppSpecificPasswordRequest command, especially in cases where it is creating an Application Passcode named “ZimbraWeb”; and
• Use of the GetScratchCodesRequest command.

While LAUNDRY BEAR uses the localStorage property to track what days had emails previously exfiltrated, defenders can use this property to identify victims of this campaign and determine the scope of exfiltrated information [D3-PA]. Review of the items stored in that property for an organization’s ZCS webmail client page on an endpoint device could indicate compromise if there are items named with a format of zd_comp_YYYY-MM-DD, as explained in the Collection section of this advisory.

While Application Passcodes have non-malicious purposes, in this case instances of these passcodes with the name “ZimbraWeb” are almost certainly malicious. The ZCS webmail application can support 2FA natively and does not require the use of an Application Passcode, so there is no reason that there should be one named “ZimbraWeb.”

In instances where organizations identify victims of this campaign, they should also examine the inbox of the suspected victim for the original phishing email [D3-MA]. If an email that has a payload exploiting CVE-2025-66376 is discovered, steps should be taken immediately to identify and quarantine other instances of emails with similar body content, senders, and subject lines to prevent further exploitation and exfiltration.  

Remediation

In the event an organization identifies activity associated with this campaign, that organization should take steps to minimize further exploitation. The organization should consider requesting that employees minimize use of the ZCS webmail client until the organization updates to a patched version that is not vulnerable to CVE-2025-66376.

Organizations should use identifiers from the IOCs section of this report to identify any individuals compromised by this campaign and record the date(s) of compromise(s) to determine the scale and scope of emails exfiltrated.

All users from the organization should have all Application Passcodes and 2FA scratch keys revoked. Affected organizations should require all employees to change passwords in line with establishing minimum password strength requirements [CPG 3.B] and creating unique credentials [CPG 3.C], specifically noting that compromised employees might have had any password stored in a password manager exfiltrated.

Works cited

[1] Netherlands General Intelligence and Security Service (AIVD) and Netherlands Defence Intelligence and Security Service (MIVD). AIVD and MIVD identify a new Russian cyber threat actor. 2025. https://www.aivd.nl/site/binaries/site-content/collections/documents/2025/05/27/aivd-en-mivd-onderkennen-nieuwe-russische-cyberactor/Advisory+AIVD+en+MIVD+Public+report+on+new+cyber+actor.pdf

[2] Microsoft Corporation. New Russia-affiliated actor Void Blizzard targets critical sectors for espionage. 2025. https://www.microsoft.com/en-us/security/blog/2025/05/27/new-russia-affiliated-actor-void-blizzard-targets-critical-sectors-for-espionage/

[3] Palo Alto Networks Unit 42. Russian Global Webmail Espionage. 2026. https://unit42.paloaltonetworks.com/russian-webmail-espionage/ 

[4] Proofpoint. TA488 Targets Zimbra Mailservers with Half-Click Exploits. 2026. https://www.proofpoint.com/us/blog/threat-insight/ta488-zcs-exploit

[5] Seqrite. Operation GhostMail: Russian APT exploits Zimbra Webmail to Target Ukraine State Agency. 2026. https://www.seqrite.com/blog/operation-ghostmail-zimbra-xss-russian-apt-ukraine/  

Footnotes

¹ Národní úřad pro kybernetickou a informační bezpečnost
² Forsvarets Efterretningstjeneste
³ Välisluureamet
⁴ Sotilastiedustelu
⁵  Suojelupoliisi
⁶ Direction générale de la sécurité intérieure
⁷ Agence nationale de la sécurité des systèmes d’information
⁸ Agenzia Informazioni e Sicurezza Esterna
⁹ Agenzia Informazioni e Sicurezza Interna
¹⁰ Serviciul de Informații și Securitate al Republicii Moldova
¹¹ Agencja Wywiadu
¹² Służba Kontrwywiadu Wojskowego
¹³ Centro Nacional de Inteligencia
¹⁴ Nationellt Cybersäkerhetscenter
¹⁵ MITRE and ATT&CK are registered trademarks of The MITRE Corporation. MITRE D3FEND is a trademark of The MITRE Corporation.

Acknowledgements

The authoring agencies acknowledge the contributions to this advisory from Palo Alto Networks Unit 42 and Proofpoint.

Disclaimer of endorsement

The information and opinions contained in this document are provided "as is" and without any warranties or guarantees. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement, recommendation, or favoring by the United States Government, and this guidance shall not be used for advertising or product endorsement purposes.

Organizations have no obligation to respond or provide information back to the authoring organizations in response to this joint advisory. If, after reviewing the information provided, an organization decides to provide information to the authoring organizations, reporting must be consistent with all applicable laws and policies.

Purpose

This document was developed in furtherance of the authoring agencies’ cybersecurity missions, including their responsibilities to identify and disseminate threats, and to develop and issue cybersecurity specifications and mitigations. This information may be shared broadly to reach all appropriate stakeholders.

Contact

Appendix A: MITRE ATT&CK tactics and techniques

See Table 9 through Table 19 for all the threat actor tactics and techniques referenced in this advisory.

Appendix B: MITRE D3FEND countermeasures

See Table 20 for a mapping of several of the cybersecurity countermeasures mentioned in this advisory.

The post Privacy: AI meeting notetakers save time, but SMEs must weigh privacy, trust and data control risks now appeared first on SME Cybersecurity News.

• Front: LLMs in the kernel; GNOME save and restore; Fedora changes; BPF and tracepoints; BPF and LSMs; famfs; sched_ext.
• Briefs: GNOME security; PyPI policy; Arch on aarch64; Firefox 153; Quotes; ...
• Announcements: Newsletters, conferences, security updates, patches, and more.

Hello, again. This is Trey.

Welcome to part 8 in my Cheap Yellow Display (CYD) Project series.

If you wish to catch up on earlier episodes, you can find them on my HPR profile page https://www.hackerpublicradio.org/correspondents/0394.html

It is hard to believe that I started this project and the HPR series to document it more than a year ago. Time flies. Life happens. I spent the last 8 months so focused on work related activities that I had to set the project aside. And once I set it aside, it was difficult to get back to again. The one time I tried, I found that my son's old Windows laptop, which I had commandeered to use for the project, was once and truly dead.

We live in a different world now than we did when I began this project. Today, everything is about AI – how it is changing our world, increasing efficiencies, and even displacing certain types of jobs. "Vibe coding" is transforming the way we make software, and now everyone is a developer.

Within my organization, we are all being strongly encouraged to learn more about AI and apply it in our daily work. We are blessed to have access to a wide range of training and to powerful tools which support the process. Several colleagues within my organization and outside my organization have recommended Claude Code -- for development, for organization, for brainstorming, and for much more. My role is not that of a developer, and I have had no need for Claude Code at work. There are plenty of other tools for me to use.

But at home, I thought... I could install Claude Code at home to experiment with and to learn. And then it hit me. I wonder if I could use Claude Code to help me with my stalled CYD project.

"Hello, my name is Trey, and I am a fraud."

OK. I don't think I am a fraud, but having never used such a powerful tool to help me code, I feel a little bit like a fraud, with Claude doing the work for me. Let's talk through what we did.

As I mentioned, I was unable to use the laptop on which I created the original GUI code. But no worries, because It was all on GitHub, right?

So, I began by trying to install Claude Code on one of my Ubuntu machines. That failed miserably, and all the instructions I found online recommended running it on Windows. So I transitioned to installing Claude Code on a freshly built Windows 10 system using some old hardware which will not support Windows 11. Surprisingly, It seems that Claude wants to run within Ubuntu on Windows Subsystem for Linux (WSL).

Once I went through all the hoops for installing and setting up my basic subscription, I got to work. I created a new directory to use for all my project files, and another one for Claude to write all its output files to.

Everything I have read and heard about using Claude Code for a project like this recommended beginning by using Claude to create the project plan. So my first prompt was as follows:

"I am building a project using an ESP32 cheap yellow display. The final goal is to have a device with a graphical user interface which will allow me store several text messages, each assigned to their own specific button. Then, when one of the buttons is pressed, the message will be converted into morse code, and the message will be sent by blinking an onboard LED. I already have the initial design for the GUI coded in my github repository. Please construct a detailed step by step plan for building this application"

I wanted to keep it simple at the beginning, so even though I plan to use an opto-isolated relay for the output, I am starting out using the built in LED.

Claude asked me for the URL for my Github repository, and I provided it. After thinking for a bit, it produced a project plan.

CYD Morse Sender — Step-by-Step Build Plan

What You Already Have

- 3 fully designed LVGL screens (Send, Config, Keyboard)

- 7 send buttons with green styling on the Send Screen

- Speed slider (5–30 WPM) and program slot dropdown on Config Screen

- Text area + LVGL keyboard widget on Keyboard Screen

- Display driver and touchscreen hardware initialized (but touch read was stubbed out)

---

Phase 1: Fix Touchscreen Input

Initialize the XPT2046 on VSPI, replace the hardcoded touched = false with real touch data, calibrate raw ADC coordinates to screen pixels, and verify all three nav buttons transition screens correctly.

Phase 2: Persistent Message Storage

Use Preferences.h / NVS to store 7 messages ("msg0" – "msg6") that survive power cycles. Load on boot and populate send button labels.

Phase 3: Config Screen — Slot Selection & Speed

Wire the Program dropdown to g_selectedSlot, wire the Speed slider to g_wpm with a live WPM label, and wire the Set button to clear the text area and navigate to the Keyboard Screen.

Phase 4: Keyboard Screen — Capture and Save Text

On keyboard OK (LV_EVENT_READY): read the text area, save to NVS, update the send button label, navigate back. On Cancel: navigate back without saving.

Phase 5: Morse Code Engine

Build morse.h with the full A–Z / 0–9 lookup table, a textToMorse() converter, and Paris-standard timing (unit_ms = 1200 / wpm).

Phase 6: Non-Blocking LED Transmission

State machine (IDLE / LED_ON / LED_OFF) driven by millis() in a morseUpdate() function called every loop — no delay(). LED on GPIO 17 (blue).

Phase 7: Wire the Send Buttons

Each button calls startMorse(getMessage(slot)) if not already transmitting. Disable all send buttons during TX; re-enable when the state machine reaches the end.

Phase 8: Integration & Polish

Stop button, WPM persistence, empty-slot guard, serial debug output, final touch calibration, end-to-end test checklist.

---

Recommended order: Phase 1 → 2 → 7 (partial) → 5 → 6 → 7 (full) → 3 → 4 → 8

This was wild! Claude determined exactly how far along I was in the project, and also alerted me to the fact that the "touch read was stubbed out". Ugh. This means that the files I had uploaded to GitHub were my original GUI files (Episode 05 – HPR4532 - https://hackerpublicradio.org/eps/hpr4532/index.html ) and not the ones that I finally got working properly (Episode 07 – HPR4624 - https://hackerpublicradio.org/eps/hpr4624/index.html ). That was my own fault. Did I mention that I don't get Git? I REALLY need to learn to properly use Git!

But, we have a plan, broken down by eight numbered phases. And they seem to address all the functionality I wanted with a few additional things I had not thought about. Interestingly, even though these phases are sequentially numbered, Claud recommended that we approach them in a bizarre order: Phase 1 → 2 → 7 (partial) → 5 → 6 → 7 (full) → 3 → 4 → 8 .

Alright. Let's see what we can do. The first phase is to fix the touchscreen input.

Claude took me through it step-by-step, asking as it needed to read specific project files.

Finally, it wrote a new ui.ino code file to my speficied output directory for me to test. I copied it into the correct file location, said a quick prayer, compiled in Arduino IDE, and downloaded to the CYD.

Well, that is... interesting. The display looked nothing like it was supposed to. There were vertical green bars with smaller dashed green vertical stripes in them. I will include a picture in the show notes so that you can see what it looked like and why it was so difficult to describe.

I spent the next hour or so trying to explain what I was seeing to a chat bot. Claude recommended potential fixes which either did nothing or made the situation worse. I began questioning whether this was a good idea, how people actually gained efficiencies talking to a bot, and even several life choices.

Then I had a thought. I prompted Claude:

If I were to take a picture of the screen on the cheap yellow display and copy it into the output folder, would you be able to analyze it to better determine what is wrong and how to fix it?

Shockingly, Claude answered in the affirmative, and told me to copy the picture to the output folder and let it know when to proceed. It analyzed the picture and more of the supporting files it had copied from my GitHub, asking each time if it could access that file. It determined that my original code was written for a flavor of LVGL version 8 and I was now using LVGL 9.5.

It recommended changes, and then asked permission to make those changes, file by file. .h files & .c files, Finally, I just gave it permission to edit the files in the project folder without asking for permission for each file each time. Claude was still explaining each change, showing me exactly what would be changed, and asking for permission, so that I could review all of the changes. But now it was not asking additional permission to write to each of the impacted files.

Next, Code compiled and downloaded. Different screen, but not right. Again, I took a picture and gave it to Claude to analyze. So, Claude paused and altered the code to generate a specific test pattern overtop of the GUI.

The test pattern was supposed to cover the entire rectangular screen. But parts of the pattern were in a square on the screen and parts were not. Another photograph and analysis, told Claude that there were some rotation/screensize issues.

We repeated this several times. Some resulted in improvement, and others did not.

This is the point where I noticed something interesting. Not about Claude, specifically, or about the app. But I noticed something interesting about myself and about the process.

Previously, when I was working through some of these challenges without Claud, I found myself becoming more and more stressed, frustrated, and angry, until I found a solution. Then another problem would repeat the cycle. Success in the end was great, but the emotional extremes during the process were not always pleasant.

Now, I was effectively managing the project, and relaying information to the resource responsible for fixing the problems -- a very different experience.

But I also ran into another issue. Claude became absolutely certain that the problem revolved around the device not accurately knowing where the 4 corners of the screen were. But in reality, the output of the test pattern was rotated 90 degrees from the actual screen. It took several iterations of me insisting that the problem had to do with screen orientation and not corner coordinates. It was interesting to experience the tool doubling down on an obvious mistake, but we finally resolved that.

Again, while it was frustrating, it was much less stressful.

We proceeded to Phase 2: Persistent Message Storage where we ensured that the button labels on the send screen were stored in the devices persistent storage, so that, when they are edited to contain the message they should send, that information would survive a reboot.

Next, we combined elements of Phase 5: Morse Code Engine , Phase 6: Non-Blocking LED Transmission , and Phase 7: Wire the Send Buttons together. Building the morse code engine was an area I had been thinking about for a while. I already had working parts of something similar in the Arduino practice oscillator I have referenced a few times in this series. The code for the practice oscillator may be found on my GitHub, but it was all based on original code from jmharvey1, with my only contribution being making pin assignments variables so that the code could easily be ported to different devices.

So, I was happy that we were building the morse code engine directly. The code for it may be found in morse.h, which uses a constant character lookup table to define each character. Without any specific direction from me, Claude used the PARIS timing methods I have already described within Episode 6 of this series. It defines timing for DOT, DASH, LETTER_GAP, and WORD_GAP, and all are based on a simple calculation of 1200 ms / the number of words per minute (WPM) we wish to transmit.

Along the way, we discovered that, if we tried to use the delay() function, it would crash the program due to a conflict with the LVGL timer used for touchscreen inputs. Claude altered all the delays accordingly.

Then, Phase 3: Config Screen — Slot Selection & Speed allowed us to configure the WPM we wished to use in addition to selecting a specific Send button to reconfigure. This forced us to work on Phase 4: Keyboard Screen — Capture and Save Text which is used to type the entries for each Send button. At this point, I also decided that we would want to also use the Keyboard Screen to send ad hoc morse as we typed it.

During this phase we discovered several bugs which seemed to cause random freezes. Careful troubleshooting with messages output to the Arduino IDE's serial console helped us narrow down the causes and remedy them.

Finally all the tests worked and I am able to merrily pre-configure macro buttons with custom messages and use the CYD to send the morse code for those messages to the on-board LED at whichever rate I specify.

I have noticed in my presentation of this narrative that I repeatedly slip into the first person plural terms "we" and "us" instead of the first person singular terms "I" and "me". I have unconsciously personified Claud and recognized it as an integral part of my (formerly one person) development team.

I finally configured Claude to connect to my GitHub repo and upload all the files and documentation. We additionally created a CYD-Narrative.md file which describes in more detail all the work which was done on the project. I still do not 100% get git, but we are successfully using it.

You can find all these files in my GitHub repo ( https://github.com/jttrey3/CYD_MorseSender ) where they are shared under a GPL 3.0 license.

There are still several additional steps I plan to complete in the next few months.

1. I will be integrating an opto-isolated relay which will allow me to plug the device into the straight key input on any amateur radio. This will require a battery power source, charge controller, and more hardware.

1. I... make that "We" (Claude & I) will be modifying the code to support an audio side tone through an attached speaker when sending code
2. We will add an output selection switch to the config page to choose any combination of speaker, relay, or LED as output.
3. We will develop a downloadable firmware which I hope to share with the Cheap Yellow Display community.

If you can think of any additional features you would like to see integrated, please drop me an email using the address in my HPR profile.

I may also work with a friend to attempt to 3d print a case for the entire contraption, and I will be sure to record additional episodes sharing the process.

I have learned so much throughout this project, about the CYD, ESP32, GUIs, Claude Code, GitHub, and most of all, about myself.

Does using AI to develop this code make me a fraud? It still feels like it in some ways.

Does it make me more productive? ABSOLUTELY! I made consistent forward progress when I only had 30-60 minutes each day to work on it, and everything discussed in this episode was completed in less than a week. If I had been able to work on it for a few hours uninterrupted, it may have only taken me 3-5 hours.

Does it empower and inspire me to do more projects like this? 100% I feel like I had support working with me the whole way. I was less stressed overall, and it had less of an impact on the amount of and quality of time I spent with my family.

I will be wrapping up this series soon, without any more 6 month gaps, I hope.

Until next time...

Provide feedback on this episode.

Changes and updates

• Update Tor Browser to 15.0.11, which fixes several vulnerabilities in Firefox 140.10.1.

  We are not aware of these vulnerabilities being exploited in practice until now.

• Update Thunderbird to 140.10.0.

• Stop making it possible to start our ISO images from a USB stick.

  Since 2019, we recommend USB images to start Tails from a USB stick, which is by far the most common way of running Tails.

  We still distribute ISO images to start Tails from a DVD or in a virtual machine. Until now, these ISO images worked on USB sticks as well, but provided a degraded experience without automatic upgrades or Persistent Storage.

  Our ISO images no longer work on USB sticks to save a few megabytes and prevent confusion for people who use USB sticks.

For more details, read our changelog.

Get Tails 7.7.1

To upgrade your Tails USB stick and keep your Persistent Storage

• Automatic upgrades are available from Tails 7.0 or later to 7.7.1.

• If you cannot do an automatic upgrade or if Tails fails to start after an automatic upgrade, please try to do a manual upgrade.

To install Tails 7.7.1 on a new USB stick

Follow our installation instructions.

To download only

If you don't need installation or upgrade instructions, you can download Tails 7.7.1 directly:

• For USB sticks (USB image)

• For DVDs and virtual machines (ISO image)

Read the original post: Here’s $250 Off the New Galaxy Watch Ultra 2

Added

• SNI scanner (Scanner → SNI Scanner). Finds SNI/front hosts that work on your network via real TLS handshakes. Domain mode tests a list of candidate domains as SNI on :443; Range mode tests one SNI across an IPv4 CIDR range (bounded). Working hosts can be applied as your custom SNI hosts (used by fronted webtunnel/meek/snowflake bridges) or saved to the library. Green = handshake completed (usable), red = blocked/reset.
• Saved-bridges library (Scanner → Saved). Bridges from the bridge scanner and hosts from the SNI scanner can be saved to a persistent library, then labelled, re-applied or removed later - scan results are no longer lost when the scan finishes. Both scanners gained a Save to Library action.
• Current Bridge tab: per-row copy + sortable columns (#69). Each bridge row has a one-tap copy button, and the Type / Address / Status headers sort on click (click again to reverse); the bridge currently in use stays pinned to the top.
• Bridge copy/export refinement (#56). Copy on the Current Bridge tab now returns only the bridge Tor is actually using (not the whole supplemented list), and Export writes a CSV with Type, Address, Status, Fingerprint and the raw line.
• CLI scan <type> --use. After probing, the reachable bridges are saved as your custom list and selected as the source, so the next connect uses exactly those - the command-line equivalent of the GUI scanner's Apply button.

Fixed

• Custom bridge source ignored under Smart Connect (#70). Smart Connect (on by default) reset the source to Auto and dropped your custom bridge list while racing its own transports, so a pasted obfs4 bridge could end up connecting via a webtunnel bridge you never added. Smart Connect now honors an explicit Custom source and uses exactly those bridges.

Thanks to @Airuop for the scanner and bridge-tab suggestions.

Downloads