Read more of this story at Slashdot.

A remote code execution vulnerability exists in the HTTP Protocol Stack for Microsoft Internet Information Services implemented in HTTP.sys. The vulnerability is due to invalid validating incoming HTTP requests.

A remote, unauthenticated attacker can exploit this vulnerability by sending crafted HTTP packets to the target system. Successful exploitation of this vulnerability can result in a denial-of-service condition, or, in the worst case, code execution with kernel privileges.

The Vulnerability

HTTP.sys is the kernel-mode HTTP protocol driver in Microsoft Windows. It provides HTTP request parsing, response caching, and SSL/TLS termination for Internet Information Services (IIS) and other applications that register URL prefixes. The driver listens on configured TCP ports (commonly 80 for HTTP and 443 for HTTPS) and processes inbound HTTP/1.x and HTTP/2 requests at the kernel level.

When operating over HTTPS, HTTP.sys delegates TLS processing to the Windows Secure Channel (SChannel) provider. Inbound TCP data is decrypted on a per-record basis: each TLS record constitutes an independent unit of encryption and is decrypted separately by SChannel before being delivered to HTTP.sys as a distinct plaintext buffer. A single TLS 1.3 application data record has the following structure:

The decrypted payload of each TLS record is delivered independently to the HTTP parser via

UlHttpBufferReceiveEvent(), regardless of how many TLS records the underlying TCP connection coalesces into a single TCP segment. This behavior is distinct from plaintext HTTP connections, where the Windows TCP stack coalesces multiple segments into a single receive indication before the data reaches HTTP.sys.

The HTTP parser maintains a per-request state object that includes a dynamically grown buffer reference array. The capacity field stores the current number of allocated slots in the buffer reference array. The count field stores the number of slots currently in use. The ref_array_ptr field points to the dynamically allocated array of 8-byte buffer reference entries.

An integer overflow vulnerability exists in HTTP.sys. The vulnerability is due to insufficient bounds checking when growing a buffer reference array during HTTP/1.x header parsing. When HTTP.sys receives data for an HTTP/1.x request, it allocates a UL_REQUEST_BUFFER structure for each receive indication and tracks these buffers in the per-request reference array described above. The count field records the number of active buffer references, and the capacity field records the total number of allocated slots.

As the HTTP parser (UlpParseNextRequest()) processes header lines, it calls an inline buffer reference routine each time a new receive buffer is consumed. When count reaches capacity, the routine grows the array by reallocating it with five additional slots. The new allocation size is computed as 0x28 + capacity * 8, the contents of the existing array are copied via memmove using count * 8 as the copy length, and capacity is incremented by 5 as a 16-bit unsigned integer addition. No overflow check is performed on this addition.

After 13,107 growth events, capacity reaches 0xFFFB. The next growth adds 5, producing 0x10000, which truncates to 0x0000 in the 16-bit field. On the subsequent buffer reference addition, count (which is now 65,536 or greater) exceeds the zero capacity, triggering another growth. The allocation size computation 0x28 + 0 * 8 produces a 40-byte allocation, but the memmove copies count * 8 bytes (approximately 524,256 bytes) from the old buffer into the 40-byte allocation. This results in a kernel pool heap buffer overflow of over 500 kilobytes.

Each buffer reference corresponds to one receive buffer delivered to the HTTP parser. For plaintext HTTP connections, the Windows TCP stack coalesces received segments into large indications, and UlpMergeBuffers() further combines buffers within HTTP.sys. Over TLS connections, each TLS record is decrypted independently by SChannel and delivered as a separate buffer through UlHttpBufferReceiveEvent() into UlpCopyIndicatedData(). If each TLS record contains exactly one complete header line (terminated by CRLF), the HTTP parser fully consumes the buffer without setting the partial-parse flag, causing UlpAdjustBuffers() to advance to the next buffer via its non-merge path. This creates a 1:1 correspondence between TLS records sent and buffer references accumulated.

To trigger the overflow, an attacker crafts an HTTP request in which each header line is encapsulated in a separate TLS application data record. Given a minimum header line size of approximately 4 bytes and a required count of 65,536 buffer references, the total request size comes to roughly 262,144 bytes. The MaxRequestBytes registry value (at HKLM\SYSTEM\CurrentControlSet\Services\HTTP\Parameters) must be configured to a value of at least 262,144 bytes for the server to accept a request of this size. The default value of 16,384 bytes limits the request to approximately 4000 header lines, which is insufficient to trigger the overflow. As a mitigation, keeping MaxRequestBytes at or below 65,535 bytes represents the most conservative configuration to prevent this attack.

A remote unauthenticated attacker could exploit this vulnerability by sending a specially crafted HTTP/1.x request over a TLS connection to an affected server. Successful exploitation results in unexpected system termination due to a memory access exception in the context of the kernel. Under specific memory layout conditions, exploitation could result in arbitrary code execution in the context of the kernel.

Notes:

• The vulnerability is only reachable through HTTP/1.x header parsing over TLS connections. HTTP/2 and HTTP/3 use different parser paths that do not interact with the buffer reference array.

• Body data parsing (Content-Length or chunked transfer encoding) does not add entries to the buffer reference array. Only header parsing triggers buffer reference growth.

• At a sending rate of 10 milliseconds per TLS record, the overflow requires approximately 11 minutes to trigger.

Source Code Walkthrough

The following code snippet was taken from HTTP.sys version 10.0.26100.7705. Comments added by TrendAI Research have been highlighted.

In UlpParseNextRequest():

Detection Guidance

To detect an attack exploiting this vulnerability, the detection device must monitor and parse traffic on the TCP port 443.

The traffic on the affected port(s) is TLS-encrypted. The detection device must be able to decrypt the TLS traffic before applying the following detection method. The detection device should monitor for HTTPS connections.

An HTTP/1.x request [1] consists of a request line followed by zero or more header field lines, each terminated by CRLF. The following grammar defines the relevant structure:

Decrypted traffic inspection:

After decrypting the TLS session, the detection device must parse the HTTP/1.x request headers. The detection device must count the number of distinct header field lines present in a single HTTP request. If the number of header field lines in a single request exceeds 1,000, the traffic should be considered suspicious; an attack exploiting this vulnerability is likely underway.

Encrypted traffic heuristics:

Where decryption is not available, the detection device should inspect the pattern of TLS application data records within the encrypted session. If each TLS application data record contains a single short payload and the total number of such records on a single connection exceeds 1,000, the traffic should be considered suspicious; an attack exploiting this vulnerability is likely underway.

Notes:

• The preferred detection method (header line count) requires the ability to decrypt TLS traffic, for example through TLS inspection, a decrypting proxy, or possession of the server's private key. This method directly observes the attack indicator and produces low false-positive and false-negative rates.

• The TLS record heuristic operates on encrypted traffic and does not require decryption. This method is more prone to false positives (legitimate applications that send many small TLS records, such as interactive streaming sessions, may trigger the heuristic) and to false negatives (the threshold is based on observable record sizes rather than the actual header count that determines exploitability). Where possible, decrypted traffic inspection should be preferred.

• The attack requires approximately 11 minutes of sustained connection to accumulate sufficient header lines. Connection duration monitoring may serve as a supplementary detection heuristic.

Conclusion

This vulnerability was patched by Microsoft in the June 2026 release cycle. They note several mitigations that include editing the registry to ensure unpatched systems are not vulnerable to exploitation. However, the best method to ensure this bug has been fully remediated is to test and deploy the vendor-supplied patch.

Special thanks to Yazhi Wang and Jonathan Lein of the TrendAI Research team for providing such a thorough analysis of this vulnerability. For an overview of TrendAI Research services, please visit https://go.trendmicro.com/tis/vulnerabilities.html.

The threat research team will be back with other great vulnerability analysis reports in the future. Until then, follow the team on Twitter, Mastodon, LinkedIn, or Bluesky for the latest in exploit techniques and security patches.

Read more of this story at Slashdot.

Add Laguna XS 2, XS 2.1, and S 2.1 support to the MLX model and create paths.

Read the source config to apply one quantization policy across dense and routed MoE layers. Keep the tied output head and router at source precision, quantize supported attention and expert projections, selectively promote sensitive expert down projections, and emit per-tensor metadata for mixed quantization blobs.

Correct dense expert loading, BF16 source-layout handling, expert global-scale shapes and dtypes, routing-score scaling, and mixed-precision expert dispatch. Gate/up and down projections select quantized or dense execution independently so promoted BF16 down projections do not force quantized gate/up weights through the dense fallback.

Optimize the forward pass with compatible gate/up fusion, sorted standard GatherMM and GatherQMM operations for larger prefills, model-local mlx.Compile closures for elementwise MoE work, and cache-backed 512-token prefill chunks. This keeps the implementation on maintained MLX operations without custom kernels.

Add focused tests for Laguna configuration variants, quantization policy and metadata, dense and routed expert loading, mixed-precision dispatch, compiled-versus-eager parity, fused projections, routing, and prefill chunking.

• review comments and S 2.1 performance fixes

Address renderer/parser selection and mixed-precision expert quantization review feedback.

Keep Laguna weights resident on Metal to prevent repeated paging of its large, sparsely accessed expert buffers. Scope this policy to Laguna GPU execution.

Remove obsolete 512-token prefill chunking now that the runner's 2048-token path is faster.

• review comments addressed

• fix create

Today we're releasing Android 17 and making it available on most supported Pixel devices. Look for new devices running Android 17 in the coming months.

Android 17 marks the start of our transition to an intelligence system, putting your apps at the center. It's shifting to an adaptive-first development standard by introducing mandatory large-screen resizability, all while delivering next-generation privacy, security, media, camera, and performance. We'll cover all that in this post, as well as how we're bringing together next generation tools, libraries, and agent skills to help your apps embrace the opportunity.

Throughout the past year, from our Canary channel to our Beta releases, we’ve collaborated with you in the developer community to build a platform you and your users can trust. To that end, this moment marks the availability of the source code at the Android Open Source Project (AOSP). This allows you to examine the source code for a deeper understanding of how Android works.

Let's dive deeper into Android 17.

An intelligence system

With deep integration between hardware, software and AI, we’re transforming Android from an operating system to an intelligence system. It's about delivering new helpful experiences that anticipate user needs, and it brings more opportunities for engagement with your apps. To that end, Android 17 expands the capabilities of AppFunctions, a platform API with a corresponding Jetpack library. It allows you to contribute your app's unique capabilities as orchestratable "tools" for Android MCP, the on-device equivalent of the Model Context Protocol. AI agents and assistants (like Google Gemini) can discover and execute AppFunctions to perform workflows on behalf of the user with direct access to the app's local state.

The Jetpack library, currently in alpha, makes adding AppFunctions as easy as annotating a class and adding KDoc comments.

/**
 * A note app's [AppFunction]s.
 */
class NoteFunctions(
    private val noteRepository: NoteRepository
) {
    /**
     * Adds a new note to the app.
     *
     * @param appFunctionContext The execution context.
     * @param title The title of the note.
     * @param content The note's content.
     */
    @AppFunction(isDescribedByKDoc = true)
    suspend fun createNote(
        appFunctionContext: AppFunctionContext,
        title: String,
        content: String
    ): Note {
        return noteRepository.createNote(title, content)
    }
}

We’ve also launched an AppFunctions agent skill that analyzes your app’s key workflows, automatically generates the required Kotlin code, optimizes your KDocs for LLM tool-calling, and provides ADB commands for testing and debugging.

The Gemini integration is currently in a private preview with trusted testers, but you can begin preparing your apps now. In addition to ADB commands to execute your AppFunctions, we've provided a test agent app that includes an interface to discover and execute your app functions and simulate an AI agent integration. Join our integration early access program at goo.gle/eap-af for a chance to be among the first apps to deploy AppFunctions to production.

Adaptive-first

Your users no longer rely on a single form factor; they transition between phones, foldables, tablets, laptops, automotive displays, and immersive XR environments. Now, with over 580 million large screen devices in the hands of users and the forthcoming launch of Googlebooks, the next generation of ChromeOS built on the Android stack, adaptive is no longer just a technical goal. It’s a massive opportunity to reach highly engaged users, which is one of the reasons we're shifting to an adaptive-first development standard.

No resizability/orientation restrictions on large screens

To ensure apps deliver a premium experience across all form factors, including mobile devices running in desktop mode on connected displays, Android 17 (API level 37) removes the developer opt-out for orientation and resizability restrictions on large screen devices (sw > 600 dp) for apps targeting API level 37. The system will ignore legacy manifest attributes and runtime APIs, including screenOrientation, setRequestedOrientation(), resizeableActivity=false, and aspect ratio constraints (minAspectRatio/maxAspectRatio). Games (based on app category in Google Play) remain exempt. Your app must be ready to adapt to any window size, respect the user's preferred device posture, and support free-form windowing natively.

Next-gen multitasking: App Bubbles, Bubble Bar, and desktop interactive PiP

Android 17 introduces powerful new windowing capabilities that redefine how users multitask, demanding even greater layout flexibility from your apps:

• App Bubbles: Moving beyond the messaging bubbles API, users can now transform any app into a floating bubble by long-pressing its icon on the launcher. This feature is available across phones, foldables, and tablets, enabling lightweight multitasking for any workflow.
• The Bubble Bar: On large screens (tablets and foldables), the system taskbar now includes a dedicated Bubble Bar to organize, transition between, and dock these floating app bubbles.
• Desktop interactive PiP: In desktop environments, Android 17 introduces interactive Picture-in-Picture (PiP). Unlike traditional PiP windows which are read-only, these pinned windows remain fully interactive while staying always-on-top of other application windows.

App Bubbles and Bubble Bar in action

Activity recreation updates

To prevent disruptive state loss and stutter, Android 17 updates the default behavior for Activity recreation. The system will no longer restart activities by default for typical configuration changes that do not require a full UI redraw (including CONFIG_KEYBOARD, CONFIG_KEYBOARD_HIDDEN, CONFIG_NAVIGATION, CONFIG_TOUCHSCREEN, and CONFIG_COLOR_MODE).
Instead, running activities will receive these updates via onConfigurationChanged(), enabling smooth transitions. If your application explicitly relies on a full restart to reload resources for these changes, you must now explicitly opt-in using the new android:recreateOnConfigChanges manifest attribute.

Continue On

Android 17 adds Continue On to help users seamlessly transition a task between Android devices. The user sees a suggestion for the most recently opened app from their mobile device in their tablet taskbar, providing a one-tap affordance to launch the app and deep-link where they left off. Continue on can support app-to-web transitions, including falling back to using the web if the app isn't installed.

Handoff Suggestion on a Tablet

class MyHandoffActivity : Activity() {

    ...

  override fun onCreate(savedInstanceState: Bundle?) {
    super.onCreate(savedInstanceState)
    // Do stuff
    ...
    // Enable handoff
    setHandoffEnabled(true, null)
  }

  // Override and implement onHandoffActivityDataRequested
  override fun onHandoffActivityDataRequested(handoffRequestInfo: HandoffActivityDataRequestInfo) : HandoffActivityData {
    // Create and return handoff data
  }
}

Go adaptive-first with Jetpack Compose

To help you adapt your apps to meet the new Android 17 requirements, we've launched the Jetpack Compose adaptive skill. This AI-powered developer workflow helps you implement the best adaptive practices:

• Adaptive navigation: Automatically transition between bottom navigation bars on mobile and edge-anchored navigation rails on large screens using NavigationSuiteScaffold from the Material 3 Adaptive library.
• Multi-pane layouts: Implement list-detail and supporting pane layouts natively using Navigation 3 Scenes (ListDetailSceneStrategy and SupportingPaneSceneStrategy) instead of fragile fragment transactions.
• FlexBox & Grid APIs: Utilize Compose 1.11's dynamic layout components to easily adjust row and column spans on the fly, ensuring your content always fills the space beautifully.
• Advanced non-touch input: Leverage Compose 1.11's enhanced trackpad and mouse support, including native focus rings and new APIs (like TrackpadInjectionScope and performTrackpadInput) to easily test and deliver a true "laptop-class" experience on Googlebooks and Desktop Mode.
• Dynamic window states: Leverage Compose's reactive state model to seamlessly adapt your UI when the app transitions from full screen to a floating App Bubble or an interactive Desktop PiP window, ensuring a premium experience even at minimal dimensions.

Android is Compose-first

Compose offers the easiest way to build adaptive apps, and that's just one of the many reasons we believe that all Android UI should be built with Compose. To that end, Android development is now Compose-first. All new Android APIs, libraries, tools, and developer guidance will be built exclusively for Jetpack Compose. Legacy View components (in the android.widget package) and View-based Jetpack libraries (like Fragments, RecyclerView, and ViewPager) are now in maintenance mode. They will receive only critical bug fixes, and no new features.

TIP
Ready to migrate? Use our AI-driven XML to Compose Migration Skill to automatically analyze your legacy View layouts and convert them into highly-adaptive Compose code.

Performance & efficiency

App performance means a smooth user interface, fast app start times, and efficient multitasking; Android 17 has impactful improvements in all of these areas.

App memory limits

Memory usage is one of the silent foundations of overall performance. When a foreground app or service grows unchecked, memory management spikes CPU and battery utilization and eventually leads to the termination of other well-behaved cached apps and background jobs, ultimately forcing slower cold starts and impaired multitasking. 

Starting in Android 17, the system will enforce strict app memory limits based on a device's total RAM, abruptly terminating offending processes. New things to help you navigate these tighter requirements:

• R8 Optimizer: The R8 optimizer significantly reduces your app's bytecode memory footprint by shrinking classes, methods, and fields into shorter names, and stripping out unused code and resources. Use R8 in full mode along with the new R8 configuration analyzer to make sure your app is getting the most from R8.
  

• LeakCanary in Android Studio Panda: The profiler now features native LeakCanary integration as a dedicated task, fully integrated with your IDE and source code.
• ApplicationExitInfo: If your app is terminated by these limits, getDescription() from ApplicationExitInfo will return "MemoryLimiter:AnonSwap".
• On-Device Anomaly Detection: Part of ProfilingManager, you can leverage trigger-based profiling using TRIGGER_TYPE_ANOMALY to automatically capture heap dumps when the memory limit is reached.

val profilingManager = applicationContext
   .getSystemService(ProfilingManager::class.java)

val triggers = ArrayList<ProfilingTrigger>().apply {
  add(ProfilingTrigger.Builder(
    ProfilingTrigger.TRIGGER_TYPE_ANOMALY).build())
}
profilingManager.addProfilingTriggers(triggers)

And, we're working to surface more in-field memory metrics to you within Google Play Console.

Generational garbage collection

Android 17 introduces more frequent, less resource-intensive young-generation collections to ART's Concurrent Mark-Compact garbage collector (GC). By separating short-lived objects from stable, long-lived ones, the system runs frequent, lightweight "young-generation" sweeps rather than expensive full-heap scans, drastically reducing CPU usage, power drain, and UI stutter. Our testing has shown significant improvements in GC interference with application threads and a reduction in the maximum memory resident set size (RSS). ART improvements are also available to over a billion devices running Android 12 (API level 31) and higher through Google Play System updates.

Lock-Free MessageQueue

For apps targeting SDK 37 or higher, the core android.os.MessageQueue now implements a lock-free architecture, significantly reducing missed frames, improving app startup time, and radically improving the performance of busy queues in multithreaded scenarios. Note: This can break apps that use reflection on private MessageQueue fields and methods.  The peekWhen and poll APIs have been added to TestLooperManager for instrumentation testing without relying on MessageQueue internals.

Static final fields now truly final

Starting from Android 17, apps targeting SDK 37 or higher won’t be able to modify “static final” fields, allowing the runtime to apply performance optimizations more aggressively. An attempt to do so via reflection (or deep reflection) will lead to an IllegalAccessException being thrown. Modifying them via JNI’s SetStatic<Type>Field methods family will immediately crash the application.

Custom notification view restrictions

To reduce memory usage we are further restricting the size of custom notification views. This update closes a loophole that allows apps to bypass existing limits using URIs. This behavior is gated by the target SDK version and takes effect for apps targeting API 37 and higher.

Privacy & Security

Maintaining user trust is at the heart of the Android ecosystem. Android 17 introduces robust features that protect sensitive data while simplifying user experiences.

Privacy-preserving choices

Historically, apps required broad, permanent permissions to access information like contacts, precise location and media files. Android 17 continues the shift toward privacy-preserving choices that grant temporary, session-based access only to the data the user explicitly selects:

• System-Level Contact Picker: Utilizing ACTION_PICK_CONTACTS, apps can request temporary access only to specific fields (e.g., email or phone number) chosen by the user, eliminating the need for the broad READ_CONTACTS permission. It also fully supports work/personal profile separation.
• Customizable Photo Picker aspect ratio: UsingPhotoPickerUiCustomizationParams, you can customize the system photo picker to show thumbnails in portrait mode. This is perfect for apps that always display photos and videos in portrait such as video based social media apps.
• System-rendered Location Button: A new system-rendered location button that you can embed in your app grants precise location access for the current session only.
• EyeDropper API: A new system-level API, ACTION_OPEN_EYE_DROPPER, allows your app to create a system-powered eyedropper enabling the user to select color from any pixel on the display. This provides a secure, privacy-preserving color-picking experience that eliminates the need for broad, sensitive screen capture or media projection permissions.

val eyeDropperLauncher = registerForActivityResult(ActivityResultContracts.StartActivityForResult()) { result ->
   if (result.resultCode == Activity.RESULT_OK) {
       val color = result.data?.getIntExtra(Intent.EXTRA_COLOR, Color.BLACK)
       // Use the picked color in your app
   }
}
fun launchColorPicker() {
   val intent = Intent(Intent.ACTION_OPEN_EYE_DROPPER)
   eyeDropperLauncher.launch(intent)
}

Picking a color from anywhere on the screen with the system EyeDropper

Local network access

Apps targeting Android 17 now either require the ACCESS_LOCAL_NETWORK runtime permission or the use of system-mediated, privacy-preserving device pickers for local network communication, such as talking to smart home devices or casting receivers. Because ACCESS_LOCAL_NETWORK falls under the existing NEARBY_DEVICES permission group, users who have already granted other NEARBY_DEVICES permissions will not be prompted again.

SMS OTP protection

Android 17 expands SMS one-time-password (OTP) protection by delaying access to SMS messages for three hours:

• WebOTP Format: Delayed for all apps that are not the intended recipient (domain mismatch).
• Standard SMS OTP: Delayed for all apps targeting SDK 37+.
• Exemptions: Default SMS, assistant, and connected companion apps are exempt. Apps are strongly encouraged to migrate to the SMS Retriever or SMS User Consent APIs.

Post-Quantum Cryptography (PQC)

Android 17 is ready for the next generation of cryptographic security:

• Keystore Integration: Supported devices can generate ML-DSA (Module-Lattice-Based Digital Signature Algorithm) keys in secure hardware to produce quantum-safe signatures, exposed via standard JCA APIs.
• Hybrid APK Signing: Introducing the v3.2 APK Signature Scheme, which combines classical signatures with ML-DSA signatures to secure app delivery.

Safer native dynamic code loading 

Smarter password protection for physical inputs

With Android 17, we're making it safer to enter passwords, PINs, and other secrets when using a physical keyboard by no longer showing the last typed character by default.

Users can still easily customize these display settings to match their preferences (availability may vary by device manufacturer).

These enhanced privacy protections are automatically supported byAndroid's built-in SDK components and will be supported in Compose 1.12 for SecureTextFields.

Media and camera features that empower creators and delight users

Android 17 introduces new creator features that give access to pro-quality cameras and media, all while improving the experience for consumers.

• Eclipsa Video: HDR video standard built upon the SMPTE ST 2094-50 specification that introduces new metadata to help devices adapt content for their display headroom and ambient light conditions, as well as improve the simultaneous display of standard and HDR content.
• RAW14 image format: New support for the RAW14 image format provides a way for your professional camera app to capture the highest level of detail and color depth from compatible camera sensors.
• Vendor-defined camera extensions: Vendor-defined extensions enable hardware partners to define and implement custom camera extension modes, providing access to the best and latest camera features.
• Extended HE-AAC software encoder: A new system-provided Extended HE-AAC software encoder, supports both low and high bitrates using unified speech and audio coding, providing significantly better audio quality for voice messages in low-bandwidth conditions, including support for loudness metadata.
• Versatile Video Coding (H.266): Enables OEMs to add codec support by defining the video/vvc MIME type in MediaFormat, adding new VVC profiles in MediaCodecInfo, and integrating support into MediaExtractor.
• Camera device type: New APIs that query the underlying device type to identify if a camera is built-in hardware, an external USB webcam, or a virtual camera.
• Constant Quality for Video Recording: SetVideoEncodingQuality in MediaRecorder configures a constant quality (CQ) mode for video encoders to ensure uniform visual fidelity across the entire video.

Better support for hearing aids

• Bluetooth LE Audio hearing aid support: Android now includes a specific device category for Bluetooth Low Energy (BLE) Audio hearing aids with the new AudioDeviceInfo.TYPE_BLE_HEARING_AID constant, so your app can distinguish hearing aids from regular headsets to provide a tailored experience for users with assistive listening devices.
• Granular audio routing for hearing aids: Android 17 allows users to independently manage where specific system sounds are played. They can choose to route notifications, ringtones, and alarms to connected hearing aids or the device's built-in speaker, helping to avoid unwanted in-ear interruptions while maintaining a Bluetooth connection for hearing aid management apps.

CameraX and Media3

CameraX and Media3 have been updated for Android 17. They are there to do the heavy lifting, smoothing the rough edges of media development and simplifying building reliable camera capture, smooth media playback, and creative and complex editing experiences.

We've released an agent skill that can migrate legacy Android camera implementations (Camera1 or raw Camera2 APIs) to CameraX.

Note: You'll need to update your CameraX version to either 1.5.2 or 1.6.0+ to avoid a crash related to an added dynamic range mode on Android 17 devices.

Get your apps, libraries, tools, and game engines ready!

If you develop an Android SDK, library, tool, or game engine, it's critical to prepare any necessary updates now to prevent your downstream app and game developers from being blocked by compatibility issues and allow them to target the latest SDK features. Please let your downstream developers know if updates are needed to fully support Android 17.

Testing involves installing your production app or a test app making use of your library or engine using Google Play or other means onto a device or emulator running Android 17 Beta 4. Work through all your app's flows and look for functional or UI issues. Each release of Android contains platform changes that improve privacy, security, and overall user experience; review the app impacting behavior changes for apps running on and targeting Android 17 to focus your testing, including the following:

• Resizability on large screens: Once you target Android 17 (SDK 37), you can no longer opt out of maintaining orientation, resizability and aspect ratio constraints on large screens.
• Dynamic code loading: If your app targets SDK 37 or higher, the Safer Dynamic Code Loading (DCL) protection introduced in Android 14 for DEX and JAR files now extends to native libraries. All native files loaded using System.load() must be marked as read-only. Otherwise, the system throws UnsatisfiedLinkError.
• Enable CT by default: Certificate transparency (CT) is enabled by default. (On Android 16, CT is available but apps had to opt in.)
• Local network protections: Apps targeting SDK 37 or higher have local network access blocked by default. Switch to using privacy preserving pickers if possible, and use the new ACCESS_LOCAL_NETWORKpermission for broad, persistent access.
• Background audio hardening: Starting in Android 17, the audio framework enforces restrictions on background audio interactions including audio playback, audio focus requests, and volume change APIs. Based on your feedback, we’ve made some changes since beta 2, including targetSDK gating while-in-use FGS enforcement and exempting alarm audio. Full details available in the updated guidance.
• NPU access declaration: Apps targeting Android 17 that need to directly access the NPU must declare FEATURE_NEURAL_PROCESSING_UNIT in their manifest to avoid being blocked from accessing the NPU. This includes apps that use the LiteRT NPU delegate, vendor-specific SDKs, as well as the deprecated NNAPI.

Get started with Android 17

Your Pixel device should get Android 17 shortly if you haven't already been on the Android Beta. If you don’t have a Pixel device, you can use the 64-bit system images with the Android Emulator in Android Studio. If you are currently on Android 17 Beta 4.1 and have not yet taken an Android 17 QPR1 beta, you can opt out of the program and you will then be offered the release version of Android 17 over the air.

Getting the Android 17 beta on partner devices

Android 17 is available in beta on handset, tablet, and foldable form factors from partners including Honor, iQOO, Lenovo, OnePlus, OPPO, Realme, Sharp, vivo, and Xiaomi.

For the best development experience with Android 17, we recommend that you use the latest Canary build of Android Studio Quail. Once you’re set up, here are some of the things you should do:

Test your current app for compatibility, learn whether your app is affected by changes in Android 17, and install your app onto a device or Android Emulator running Android 17 and extensively test it.

Thank you again to everyone who participated in our Android developer preview and beta program. We're looking forward to seeing how your apps take advantage of the updates in Android 17, and have plans to bring you updates in a fast-paced release cadence going forward.

For complete information on Android 17 please visit the Android 17 developer site.

Read more of this story at Slashdot.

Executive summary

Russian Federal Security Service (FSB) Center 16 cyber actors continue to exploit poorly configured and vulnerable networking devices worldwide, opportunistically compromising multiple critical infrastructure sector networks. This joint Cybersecurity Advisory (CSA) builds on FBI’s Russian Government Cyber Actors Targeting Networking Devices, Critical Infrastructure Public Service Announcement of the decade-plus FSB Center 16 cyber activity by providing additional tactics, techniques, and procedures (TTPs) to enable defenders to more fully understand and counter the threat. [1] 

This CSA is being released by the following authoring and co-sealing agencies: 

• United States National Security Agency (NSA)
• United States Cybersecurity and Infrastructure Security Agency (CISA)
• United States Federal Bureau of Investigation (FBI)
• United States Department of Defense Cyber Crime Center (DC3)
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Communications Security Establishment Canada’s (CSE’s) Canadian Centre for Cyber Security (Cyber Centre)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• United Kingdom National Cyber Security Centre (NCSC-UK)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)¹ 
• Danish Defence Intelligence Service (DDIS)² 
• Estonian Foreign Intelligence Service (EFIS)³ 
• Estonian Information System Authority (RIA)⁴
• Finnish Defence Intelligence (FDI)⁵
• Finnish Security and Intelligence Service (SUPO)⁶
• French National Cybersecurity Agency (ANSSI)⁷
• Italian External Intelligence and Security Agency (AISE)⁸ 
• Italian Internal Intelligence and Security Agency (AISI)⁹
• The Military Counterintelligence Service of Poland (SKW)¹⁰ 
• Sweden National Cyber Security Centre (NCSC-SE)¹¹ 

The authoring and co-sealing agencies strongly urge device owners and network defenders to take mitigation and remediation actions against Russian government-sponsored exploitation of vulnerable routers.

Download the PDF version of this report:

• Improve Router Hygiene to Protect Against Russian State-Sponsored Targeting (PDF, 816KB)

Cybersecurity industry tracking 

The cybersecurity industry provides overlapping cyber threat intelligence, indicators of compromise (IOCs), and mitigation recommendations related to this activity. Although not all encompassing, the following list contains the most notable threat group names commonly used within the cybersecurity community related to this activity: 

• Berserk Bear 
• Energetic Bear
• Crouching Yeti 
• Dragonfly
• Ghost Blizzard
• Static Tundra

Note: Cybersecurity companies have different methods of tracking and attributing cyber actors, and this list may not provide a 1:1 correlation to the authoring agencies’ understanding for all activity related to these groupings.

Targeting details

Critical infrastructure sectors most at risk from the Russian Federal Security Service (FSB) Center 16 cyber actors’ targeting include:

• Communications,
• Defense Industrial Base,
• Energy,
• Financial Services,
• Government Services and Facilities, especially organizations at the state and local level, and
• Healthcare and Public Health.

Technical details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise¹² framework, version 19. See Appendix A for tables of the activity mapped to MITRE ATT&CK tactics and techniques. This advisory also uses MITRE DEFEND^TM version 1.4.0.

The Russian FSB Center 16 cyber actors primarily use scanning to identify poorly configured networking devices, primarily routers, for exploitation. The actors scan for Internet IP ranges with active Simple Network Management Protocol (SNMP) agents that accept common or default community strings for authentication [T1595.001, T1595.002]. These scans, run via proxies, consist of SNMP Set-Requests from a spoofed IP address [T1027] containing Object Identifiers (OIDs) that instruct the SNMP agent on poorly configured networking devices to [T1569, T1602.001, T1090]:

• Copy its configuration to a file, often called “config.bkp” or “output.txt” [T1003, T1602.002].
• Transfer the file, typically using Trivial File Transfer Protocol (TFTP), to an actor-controlled leased virtual private server (VPS) or compromised FTP server [T1583.003, T1090, T1071, T1048].

While SNMP scanning is the primary method the actors use to discover and exploit poorly configured networking devices, they occasionally exploit common vulnerabilities and exposures (CVEs) in Cisco devices, Cisco’s Smart Install (SMI) functionality, and web portals to manage network devices. The actors previously exploited at least the following CVEs [T1584.008, T1588.005, T1190, T1068]: 

• CVE-2018-0171
• CVE-2008-4128¹³

Many of these TTPs overlap with activity by other malicious cyber actors, such as Salt Typhoon. Even though this CSA focuses on Russian FSB Center 16 cyber activity, the mitigations below should detect and counter these and similar TTPs used by other actors.

Mitigation actions

The authoring agencies highly recommend network defenders implement the following mitigations to harden networks against this exploitation:

• Disable Cisco Smart Install on all devices [D3-ACH]. [2]
• Use SNMPv3 with “authPriv” configured to the most modern encryption standard that is supported by the device instead of SNMPv1 or SNMPv2 [D3-ACH]. [3]
  • Disable SNMPv1 and SNMPv2. These are legacy protocols and should no longer be needed on current devices. If they are necessary, change all community strings from defaults and only allow read-only community strings rather than read-write access.
  • SNMPv3 adds strong authentication and data encryption that are unavailable in SNMPv1 and v2. SNMPv3 replaces clear text shared passwords, known as community strings, with more securely encoded parameters, and authenticates and encrypts data [D3-MAN, D3-MENCR].
• Use strong, unique passwords for local accounts on network devices and configure credentials to be stored securely to prevent reuse of compromised passwords [D3-CH].
  • Cisco devices protect passwords in the configuration file using different hashing types. Use hashing type 8 for user credentials. Avoid using hashing type 0, 4, and 7 as they are insecure or store passwords in plaintext in the configuration file. [4]
  • Monitor for unusual credentials that do not conform to standard organizational naming conventions [D3-PM]. 
  •  Monitor for and alert on logins using local accounts. Local accounts should only be used in emergency situations when accounts supported by centralized authentication servers are unavailable. Centralized authentication to network devices should support multi-factor authentication where feasible. [3]
• Monitor and restrict access to SNMP OIDs using a Management Information Base (MIB) allow list [D3-ACH]. [5] Reference the vendor-specific MIB for the network devices and monitor OIDs for indications of reconnaissance or misconfiguration in logs or intrusion detection systems (IDS). IDS rules should be written for inbound SNMP Set-Requests that contain OIDs targeting sensitive device data [D3-PM].
  
  • Example OIDs include:
    • 1.3.6.1.4.1.9.9.96.1.1 (Cisco Config Copy)
    • 1.3.6.1.4.1.9.9.96.1.1.1.1.5 (Config Copy Server Address, value for this OID is where the configuration file is being sent to) 
• Restrict management protocols [D3-NTF].
  • Use Access Control Lists (ACLs) to only allow management protocols, such as SNMP, from management devices, preferably on an out-of-band network. [3]
  • On edge firewalls and devices deny all external communications on the following ports unless mission critical, with strict monitoring if blocking is not feasible:
    • User Datagram Protocol (UDP) port 69 (TFTP) 
    • Transmission Control Protocol (TCP) port 4786 (SMI)
    • UDP ports 161 and 162 (SNMP)
    • TCP/UDP ports 10161 and 10162 (SNMPv3)
• Update network device software and firmware images, especially to patch known vulnerabilities, and upgrade end-of-life devices to supported ones. 
  
  • Use an attack surface management service to identify and secure Internet-facing systems with weak configurations and known vulnerabilities [D3-NVA].
    • U.S.-based federal, state, local, tribal, and territorial governments and U.S. critical infrastructure organiztions should consider signing up for CISA’s no-cost Cyber Hygiene services.
    • U.S. Defense Industrial Base organizations should consider signing up for NSA’s DIB Cybersecurity Services.

Resources

United States:

• Russia Threat Overview and Advisories
• Network Infrastructure Security Guide

Canada:

• Routers cyber security best practices (ITSAP.80.019)
• Security considerations for edge devices (ITSM.80.101)
• Guidance on securely configuring network protocols (ITSP.40.062)
• Baseline security requirements for network security zones (ITSP.80.022)
• Top 10 IT security actions to protect Internet-connected networks and information (ITSM.10.089)

Works cited

[1] FBI. Russian Government Cyber Actors Targeting Networking Devices, Critical Infrastructure. Alert Number: I-082025-PSA. 2025. https://www.ic3.gov/PSA/2025/PSA250820

[2] NSA. Cisco Smart Install Protocol Misuse. 2017. https://media.defense.gov/2019/Jul/16/2002157833/-1/-1/0/CSA-CISCO-SMART-INSTALL-PROTOCOL-MISUSE.PDF

[3] NSA. Network Infrastructure Security Guide. 2023. https://media.defense.gov/2022/Jun/15/2003018261/-1/-1/0/CTR_NSA_NETWORK_INFRASTRUCTURE_SECURITY_GUIDE_20220615.PDF

[4] NSA. Cybersecurity Information Sheet Cisco Password Types: Best Practices. 2022. https://media.defense.gov/2022/Feb/17/2002940795/-1/-1/0/CSI_CISCO_PASSWORD_TYPES_BEST_PRACTICES_20220217.PDF

[5] NSA. Cybersecurity Information Sheet: Reducing the Risk of Simple Network Management Protocol (SNMP) Abuse. 2026. https://media.defense.gov/2026/Jul/09/2003959459/-1/-1/0/CSI_REDUCING_RISK_OF_SNMP_ABUSE.PDF

Footnotes

¹  Národní úřad pro kybernetickou a informační bezpečnost

²  Forsvarets Efterretningstjeneste

³ Välisluureamet

⁴ Riigi Infosüsteem Amet

⁵ Sotilastiedustelu

⁶ Suojelupoliisi

⁷ Agence nationale de la sécurité des systèmes d’information

⁸ Agenzia Informazioni e Sicurezza Esterna

⁹ Agenzia Informazioni e Sicurezza Interna

¹⁰ Służba Kontrwywiadu Wojskowego

¹¹ Nationellt Cybersäkerhetscenter

¹² MITRE and ATT&CK are registered trademarks of The MITRE Corporation. MITRE DEFEND is a trademark of the MITRE Corporation.

¹³ CVE-2008-4128 only affects end-of-life Cisco devices.

Disclaimer of Endorsement

The information and opinions contained in this document are provided "as is" and without any warranties or guarantees. Reference herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement, recommendation, or favoring by the United States Government, and this guidance shall not be used for advertising or product endorsement purposes.

Purpose

This document was developed in furtherance of the authoring agencies’ cybersecurity missions, including their responsibilities to identify and disseminate threats, and to develop and issue cybersecurity specifications and mitigations. This information may be shared broadly to reach all appropriate stakeholders.

Contact

United States organizations

• National Security Agency (NSA)
  • Cybersecurity Report Feedback: CybersecurityReports@nsa.gov 
  • Defense Industrial Base Inquiries and Cybersecurity Services: DIB_Defense@cyber.nsa.gov 
  • Media Inquiries / Press Desk: NSA Media Relations: 443-634-0721, MediaRelations@nsa.gov
• Cybersecurity and Infrastructure Security Agency (CISA) and Federal Bureau of Investigation (FBI)
  •  U.S. organizations are encouraged to report suspicious or criminal activity related to information in this advisory to CISA via the agency’s Incident Reporting System, its 24/7 Operations Center (report@cisa.gov or 888-282-0870), or your local FBI field office. When available, please include the following information regarding the incident: date, time, and location of the incident; type of activity; number of people affected; type of equipment user for the activity; the name of the submitting company or organization; and a designated point of contact. 
• United States Department of Defense Cyber Crime Center (DC3)  
  • Defense Industrial Base Inquiries and Cybersecurity Services: DC3.DCISE@us.af.mil 
  • Defense Industrial Base mandatory cyber incident reporting as required by 10 U.S. Code Sections 391 and 393 and Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012 is submitted at https://dibnet.dod.mil.
  •  Media Inquiries / Press Desk: DC3.Information@us.af.mil

Australian organizations

• Australian Signals Directorate
  • Visit cyber.gov.au or call 1300 292 371 (1300 CYBER 1) to report cybersecurity incidents and access alerts and advisories.

Canadian organizations

• The Canadian Centre for Cyber Security (Cyber Centre), part of the Communications Security Establishment, encourages Canadian organizations to report cyber incidents and to strengthen the security of their networking devices. 
  • Report an incident or suspicious activity to the Cyber Centre by email at contact@cyber.gc.ca, online via the reporting tool Report a cyber incident - Canadian Centre for Cyber Security or by phone at 1-833-CYBER-88 (1-833-292-3788).

New Zealand organizations

• New Zealand National Cyber Security Centre (NCSC-NZ): info@ncsc.govt.nz

United Kingdom organizations

• Report significant cyber security incidents to ncsc.gov.uk/report-an-incident (monitored 24/7)

Estonia organizations

• Estonian Foreign Intelligence Service (EFIS): info@valisluureamet.ee

Finnish organizations

• Finnish Security and Intelligence Service: supo.fi/en/contact

French organizations

• French organizations are encouraged to report suspicious activity or incident related information found in this advisory by contacting ANSSI/CERT-FR at: cert-fr@ssi.gouv.fr or by phone at: 3218 or +33 9 70 83 32 18.

Italian Organizations

• Italian External Intelligence and Security Agency (AISE): 
  • Visit https://www.sicurezzanazionale.gov.it/ 
• Italian Internal Intelligence and Security Agency (AISI): 
  • Visit https://www.sicurezzanazionale.gov.it/ 

Appendix A: MITRE ATT&CK tactics and techniques

See Table 1 through Table 10 for all the threat actor tactics and techniques referenced in this advisory.

Appendix B: MITRE D3FEND countermeasures

See Table 11 for a mapping of several of the cybersecurity countermeasures mentioned in this advisory.

In which Matthew & Amandine waffle about Matrix for 15 minutes

This Week in Matrix: https://matrix.org/twim

Find Matrix.org on the internet:
🐘 https://mastodon.matrix.org/@matrix
🤝 https://www.linkedin.com/company/matrix-org
🦋 https://bsky.app/profile/matrix.org
[m] Office of the Matrix Foundation https://matrix.to/#/%23foundation-office:matrix.org

• The profile backup mechanism has been enabled by default for all desktop platforms in Nightly, as well as Beta! The current plan is to have this ride out to Firefox 151 for Windows, macOS and Linux on May 18th!
  • This feature, when enabled, will create a copy of your profile data in the background and store it in a single file on your file system that you can restore from.
  • You will be able to manage this feature in Settings under Sync (for now)
    • 
  • You can read more about the feature here
• As followups to the recent addition to the WebExtension tabs API to support the new SplitView tabs feature, tabs.group() and tabs.ungroup() have been fixed to work correctly with split view tabs, and fixed split views being prepended instead of appended to tab groups when adopted into a new window – Bug 2029099 / Bug 2029534
• Adaptive autofill has been enabled on Nightly.
  • Previously, autofill only completed domains (e.g. typing red autofilled reddit.com). Now it can also complete full URLs for pages you visit often (e.g. red → reddit.com/r/firefox), learning from what you actually click in the address bar. If a suggestion isn’t helpful, you can now dismiss it so autofill learns what not to show you too.
    • If you run into issues or have feedback, you can file a bug here!
• Markus Stange [:mstange] implemented dynamic toolbar on top in RDM (#1978145), but also implemented some static skeleton UI so it’s closer to what we actually have in Firefox for Android
  • dynamic toolbar is behind a pref: devtools.responsive.dynamicToolbar.enabled
  • it can be put on top by setting devtools.responsive.dynamicToolbar.onTop, otherwise it’s at the bottom
  • 

Friends of the Firefox team

Resolved bugs (excluding employees)

Script to find new contributors from bug list

Volunteers that fixed more than one bug

• Amin Amir
• aoia7rz7l
• Chukwuka Rosemary
• DrSeed
• Frédéric Wang Nélar
• japandi
• John Iweh
• jonathancabera
• Josh Aas
• Keji Bakare
• kofoworola shonuyi
• konyhéa
• liz
• Mathew Hodson
• Okhuomon Ajayi
• Oluwatobi
• ROSHAAN
• Sam Johnson

New contributors (🌟 = first patch)

•  Anthony Mclamb: Disable the legacy Edge migrator
•  Amin Amir
  • 🌟Fix browsingContext.sys.mjs to assign to #contextCreatedHandled instead of contextCreatedHandled
  • Fix missing WITHOUT ROWID SQLite performance optimization in SERPCategorization.sys.mjs
  • 🌟 Amine Zroual: Omitted maxResults property not handled correctly in getRecentlyClosed
• any1here: install_sig_alt_stack incorrectly checks mmap’s return value
• 🌟 Armin Ulrich: Fix MessageHandlerRegistry.sys.mjs calling getExistingMessageHandler with an unused second argument
• japandi
  • Cannot remove amazon.com from top sites list
  • The height of the pinned tabs area should be responsive to the number of pins
  • Use cenum for nsIHelperAppLauncherDialog reason constants to enable better typescript annotations
• Nathan Johnson [:narjoDev]: Remove browser.display.use_system_colors pref
• DrSeed
  • Firefox shows vertical tabs in new windows despite “Hide tabs and sidebar” setting
  • The “Expand sidebar on hover” option is not kept after the vertical tabs are disabled and enabled again
• Keji Bakare:
  • Split view’s focus-outline is clipped on the right side of left tab
  • White space on the right side of left panel in split view
• 🌟 gotyaoi: Reload toolbar button is active on about:newtab
• Itoro James: [A11y][Keyboard Navigation]Cancelling a note via Keyboard Navigation still saves it
• John Iweh: The notification dot is not displayed if the tab is in a Split View
• 🌟 John Iweh: sidebar-shown attribute remains when sidebar.revamp is false
• 🌟 jonathancabera:
  • The Move tab to Split View option is also displayed for the tabs that are within the Split View
  • A Note with long text (1003 characters) is saved by pressing ENTER even if the “Save” button is disabled
  • Tab group guide line becomes disconnected under certain conditions related to split views in vertical tab mode
• Aloys: Remove logic that forces distribution language packs to be reinstalled when upgrading from Firefoxes older than 67
• liz:
  • Create test to ensure maxRenderCountEstimate is never being set to Infinity in virtual-list component in Fx View
  • Button accessible name does not convey its function: missing topic context (Settings dialog > Topics dialog > buttons Following/Unfollow/Blocked/Unblock)
• Mary cathline: Tab Group Label does not respect touch density in vertical tab bar
• 🌟 Brandon Lucier: Popups opened with window.open give window type normal instead of popup
• karan68: [dialog] New Shortcut dialog needs a label/accessible name
• 🌟 Vector: Button does not programmatically indicate that it opens a dialog (Recent activity section > story card > ••• disclosure > Delete from History button)
• 🌟 Osoble: Update font size and weight for synced tabs device name headers in Firefox View
• konyhéa:
  • Add test for sync admin disabled to browser_syncedtabs_errors_firefoxview.js
  • Check all second paramaters for TestUtils.waitForCondition in Fx View test files
  • Recently Closed Tabs, Tabs from Other Devices, and History pages should have Cmd / Ctrl + Click on a link open the link in the new background tab.
• Noble Chinonso: #shouldHandleEvent in SidebarTreeView.js compares event.keyCode to string values, causing Home/End keys to never be handled
• Pranjali Srivastava: Add a test to verify that the space above tabs is consistent across PB, LWT and sizemode (where appropriate)
• Okhuomon Ajayi:
  • More spacing is needed between the tab note icon and the close icon on the tab
  • The tabs in vertical mode collapsed state are positioned differently in Split View
  • Keep vertical split view tabs stacked vertically even when the sidebar is expanded when expand on hover is enabled
  • Vertical split view tabs can be too big or small when tabs are overflowing
• 🌟 Rishan: Fix duplicated arrow function in browser_history_sidebar.js
• Chukwuka Rosemary:
  • “Forget About This Site” context menu option missing from Firefox View history
  • Long strings are not displayed properly on the about:opentabs page search filed
  • Add test for Forget This Site option in Fxview history context menu.
• ROSHAAN:
  • 🌟Tab note background colour is incorrect for default light theme
  •  [win/linux] The splitter between content areas does not match Figma spec
  • Fix typo in OpenInTabsUtils.confirmOpenInTabs()
• Sameeksha: Disclosure button expanded/collapsed state not programmatically defined (Customize button)
• kofoworola shonuyi:
  • 🌟Actually hide or remove sidebar-shown attribute when in fullscreen.
  • Add a test for checking sidebar-shown attribute in fullscreen mode
• 🌟 Sayd Mateen: Page URL is displayed as tab name when page’s contains about:reader?</a></p> <p>

• Oluwatobi:
  • Unable to delete selected history entries from sidebar
  • Incorrect Sidebar button state/tooltip hover text
  • The city name heading level doesn’t follow the correct heading level order
• Nishchay [:nish]: Unable to add tabs to old closed tab groups (tabGroupState.splitViews is undefined)

Project Updates

Add-ons / Web Extensions

Addon Manager & about:addons

• In preparation for the Project Nova restyling of the about:addons page, we have refactored about:addons into separate per-component ES modules, splitting the monolithic aboutaddons.js and aboutaddons.html into 16 dedicated component files under components/ (with no behavior or UI changes) – Bug 2032014
  • NOTE: if you have working on patches with changes to about:addons internals it is very likely you’ll need to rebase and solve merge conflicts hit on top of this refactoring, the internals are still largely the same as before but don’t hesitate to reach out to the Addons team if you have doubts / questions or need help to figure out how to adapt your patch of top of these changes

WebExtensions Framework

• Fixed exportFunction to preserve the constructibility of the wrapped function instead of unconditionally making all exported functions implicitly as constructors – Bug 2033173
  • Thanks to Gregory Pappas for contributing this improvement to the Content Scripts’ Xray Wrappers helpers!
• Fixed a Firefox 151 regression where extension content scripts accessing location.ancestorOrigins caused subsequent page script reads of the same property to fail with “Permission denied”, breaking sites like Gmail – Bug 2034329
  • Thanks to Simon Farre for promptly investigating and fixing this recent regression!

WebExtension APIs

• Updated sessions.getRecentlyClosed() to remove the hardcoded cap when maxResults is omitted – Bug 1392125
  • Shoutout to Amine Zroual for contributing this enhancement to the sessions WebExtensions API!

DevTools

• Artem Manushenkov fixed an issue where autosuggestion popup was removing overridden indicators from properties in the Inspector (#1983408)
• Andrea Marchesini [:baku] fix DevTools cookie header serialization for long cookies, which could lead to cookies not being visible in Netmonitor (#2031299)
• Julian Descottes [:jdescottes] fixed a toolbox crash that was happening we couldn’t find a localization file (e.g. when using a language pack on Nightly) (#2028930)
• Nicolas Chevobbe [:nchevobbe] improved @container tooltip so it show the value of variables used in style()(#2030239), has enough contrast in dark mode (#2033782) and contains a link to select the container (#2031688)
  • 
• Hubert Boma Manilla (:bomsy) is making good progress on migrating the Console to CodeMirror 6 (#2032758, #2026569)

Fluent

• We’re now at over 72% of our strings being Fluent! Got a component still using .properties? Convert when you can!
• 

Migration Improvements

• Thanks to dao for fixing a recent alignment issue in the migration wizard dropdown
• Thanks to volunteer contributor Anthony Mclamb for his patch that disables the legacy EdgeHTML Edge migrator! Once that finishes rolling out, presuming no surprises, we’ll go ahead and remove the migrator entirely.

New Tab Page

• Nova for New Tab has ridden the trains to Beta! It will be enabled by default, globally, when Firefox 151 goes out to release on May 19th
  • It’s possible that we’ll do a train-hop coupled with an experiment to enable HNT Nova for a few clients a bit earlier.
• Maxx Crawford enabled Nova designs for New Tab, rolling out the updated layout, widgets, and customization panel behind HNT Nova flags.
• Maxx Crawford fixed the Nova content feed to render the intended four‑column layout by correcting CSS grid breakpoints.
• Maxx Crawford resolved a first‑load failure in the Weather widget by fixing init order and fetch timing, eliminating the “Oops” error.
• Maxx Crawford synchronized the Weather toggle between about:preferences#home and the panel via the shared showWeather pref to prevent desync.
• Maxx Crawford updated Nova grid focus order to align tab flow with visual order for keyboard users.
• Maxx Crawford fixed critical UI issues in Lists and Timer widgets covering overflow, controls, and layout stability.
• Maxx Crawford guarded document.dir access in Nova render paths to avoid startup cache worker errors and improve startup stability.
• Rolf added a new normalization method for the inferred interest vector to stabilize topic relevance across sessions.
• Rolf prevented unnecessary content refreshes during Pocket New Tab experiments, reducing jank and bandwidth.
• Sameeksha defined the Customize button’s expanded/collapsed state programmatically using aria-expanded for better a11y.
• liz clarified follow/unfollow/blocked button names with topic context so screen readers announce clear actions.
• Vector marked the Delete from History control as opening a dialog via aria-haspopup=dialog for assistive tech.
• Scott Downe fixed a regression that flipped the Wallpapers pref off, restoring user selections.
• Irene Ni corrected privacy link color and focus styles for contrast and keyboard visibility.
• Reem Hamoui added a wallpaper toggle reset in the Nova customization panel so users can quickly restore default wallpapers without extra steps.
• Reem Hamoui fixed the Customize pencil button to match the Nova spec, aligning placement and iconography for visual consistency.
• Dre updated the ‘Fresh new’ wallpapers copy to a clearer, localized message for better comprehension.
• Irene Ni fixed Nova privacy link color and focus styles to meet contrast and focus ring guidelines, improving accessibility on New Tab.
• Irene Ni adjusted Sponsored tile character limits to prevent truncation/overflow, yielding cleaner titles across grid and wide tiles.
• Scott Downe fixed a regression that flipped the Wallpapers user pref to false, restoring wallpapers for affected users and preventing unintended disablement.
• Reem Hamoui hooked the wallpaper check into the new toggle logic so the Customization Panel accurately reflects wallpaper availability and state.
• Irene Ni landed Nova UI updates for the Daily Briefing 3-pack card, improving spacing, type scale, and tap targets.
• Reem Hamoui added a wallpaper toggle reset in the Nova customization panel so users can quickly restore default wallpapers without extra steps.
• Reem Hamoui fixed the Customize pencil button to match the Nova spec, aligning placement and iconography for visual consistency.
• Dre updated the ‘Fresh new’ wallpapers copy to a clearer, localized message for better comprehension.
• Irene Ni fixed Nova privacy link color and focus styles to meet contrast and focus ring guidelines, improving accessibility on New Tab.
• Irene Ni adjusted Sponsored tile character limits to prevent truncation/overflow, yielding cleaner titles across grid and wide tiles.
• Scott Downe fixed a regression that flipped the Wallpapers user pref to false, restoring wallpapers for affected users and preventing unintended disablement.
• Reem Hamoui hooked the wallpaper check into the new toggle logic so the Customization Panel accurately reflects wallpaper availability and state.
• Irene Ni landed Nova UI updates for the Daily Briefing 3-pack card, improving spacing, type scale, and tap targets.

Search and Urlbar

• Marco has fixed a couple of issues with the places databases to try and improve stability. This should help with avoiding users losing bookmarks or favicons.
• Work continues on the new separate search bar to improve the functionality, e.g. allowing middle click to perform a search in a new tab, avoiding performing a search when adding a search engine.
• Work also continues on the new Nova layouts.

Smart Window

• uplifted 10 bugs to 150.0.1 dot release addressing initial user feedback from diary study and Connect
  • jump to bottom of conversation 2028692
  • stop streaming button 2029204
  • back/forward navigation from assistant 2029229
  • dark mode for various chips 2024499
• search engine switching from smart bar 2021973
• Nova styling within smart window 2026794

Storybook/Reusable Components/Acorn Design System

• Dustin converted moz-breadcrumb-group variables into JSON design tokens Bug 2029181 – Convert moz-breadcrumb-group variables into JSON design tokens
• Dustin converted moz-box-* variables into JSON design tokens Bug 2029180 – Convert moz-box-* variables into JSON design tokens
• Dustin converted moz-promo variables to JSON design tokens Bug 2029190 – Convert moz-promo variables into JSON design tokens
• Dustin converted moz-reorderable-list variables to JSON design tokens Bug 2029191 – Convert moz-reorderable-list variables into JSON design tokens
• Dustin converted moz-visual-picker variables to JSON design tokens Bug 2029193 – Convert moz-visual-picker-item variables into JSON design tokens
• Dustin updated browser-shared.css so it passes use-design-tokens Bug 2022985 – Update browser-shared.css so it passes use-design-tokens
• Dustin updated popup.css so it passes use-design-tokens Bug 2022979 – Update popup.css so it passes use-design-tokens
• Jon added opacity tokens and added opacity to use-design-tokens stylelint rule  Bug 1955325 – Create opacity tokens
• Jon converted toolbar design tokens to JSON Bug 2017970 – Convert toolbar design tokens to json
• Anna fixed moz-select with panel-list drop-down size inconsistency Bug 2032365 – Applications Action drop-down menus sometimes have a different size when opened
• Anna fixed issue with the disabled state of moz-radio component Bug 2027123 – moz-radio disabled state cannot be changed while the moz-radio-group is disabled
• Anna updated moz-button and moz-box-button components to prevent label corruption when accesskeys are present and the label changes.   Bug 2022326 – moz-button with accesskey label becomes corrupted when l10nId updates dynamically

UX Fundamentals

• The error pages shown when a server sends back an invalid response header or an unsupported content encoding now display accurate, context-specific messages. The invalid response header page also gained a helpful list of next steps. – 2027209
• In progress: The error page illustrations are being replaced with new artwork, and the system now supports per-illustration size configuration, giving each image the ability to define its own appropriate dimensions. – 2031837

Settings Redesign

• Tim converted settings related to Accessibility page to config-based pane Bug 1968116 – Convert settings related to Accessibility page to config-based settings
• Benjamin converted Privacy & Security page to the config-based pane Bug 1968112 – Convert settings related to Privacy & Security page to config-based settings
• Finn integrated Firefox Labs page into setting-pane config Bug 2021047 – Integrate Firefox Labs page into setting-pane config
• Anna converted Firefox Updates section to config-based prefs Bug 1990961 – Convert Firefox Updates section to config-based prefs
• Mark Kennedy added moz-promo, that is welcoming users to the redesigned settings Bug 2015093 – Add a moz-promo to welcome users to the redesign
  • 
• Anna added possibility to search for actions in the redesigned “Applications” section Bug 2020370 – It’s no longer possible to search for actions in the new “Applications” section
• Anna fixed the Settings navbar layout breakage

Source Code Viewer

Crate pages now have a "Code" tab that lets you browse the contents of published crate versions directly on crates.io. This shows you the exact files that cargo downloads when you add a crate as a dependency, which might differ from the linked repository. This makes it much easier to audit your dependencies, including files that never appear in the repository, like the normalized Cargo.toml files that cargo generates.

The viewer comes with a file tree sidebar with search functionality, syntax highlighting, and GitHub-style line selection, where clicking or dragging line numbers produces shareable #L10-L20 URLs.

Under the hood, the server now builds a zip file for every published version. Since the .crate files that cargo consumes are gzipped tarballs without random access support, a background job re-packs each of them into a seekable zip archive plus a JSON manifest describing the contained files. Both are served from our static CDN. The frontend then fetches only the manifest and loads each file on demand with an HTTP range request. Because of this architecture, browsing crate sources essentially adds no load on the crates.io API servers. Existing crate versions have been backfilled, so this works for old releases too.

The rendering library behind the code viewer is a diff renderer at heart, and that's no accident: a version-to-version diff viewer built on the same infrastructure is currently in the works. This will allow you to review exactly what changed between two published versions, right on crates.io. Stay tuned!

Untangling crates.io Accounts from GitHub

At the end of May, the crates.io team accepted RFC #3946. Crates.io accounts always have been tightly coupled to GitHub: signing in means "Log in with GitHub", and your crates.io identity is your GitHub username. The RFC changes that. It introduces usernames that are native to crates.io and independent of linked GitHub accounts, as a prerequisite for eventually supporting login via other identity providers.

The implementation of crates.io usernames has started, but there is still a lot left to do, most visibly the ability to change your crates.io username. After that is complete, there will be future RFCs and implementation for signing in with identity providers other than GitHub. Since all of this touches authentication and account security, we are deliberately taking it slow and rolling these changes out in small, carefully reviewed steps.

Advisories and Suggestions

In our January update we introduced the "Security" tab, which shows security advisories from the RustSec database. We have since taken this integration one step further: crates that RustSec has flagged as unmaintained now show a warning banner directly on their crate pages, linking to the corresponding advisory for details and possible alternatives. Thanks to Dirkjan Ochtman for implementing this feature!

Related to this, some popular crates have been largely absorbed into the Rust standard library over the years, like lazy_static, which has been superseded by std::sync::LazyLock since Rust 1.80. Crate pages of such crates now show a friendly "You might not need this dependency" banner describing the standard library replacement, and superseded crates in dependency lists get a small light bulb icon with a similar hint.

The dataset behind this feature lives in the new rust-lang/std-replacement-data repository, together with a documented inclusion policy: standard library replacements only, every entry must cite the stable std, core, or alloc API and Rust version, and crate maintainers get a notice-and-comment window before an entry is added. New entries can be proposed upstream and can benefit other tools too.

Ferris

The most delightful change of this cycle: the Ferris on our error pages now follows your mouse cursor with its eyes:

Getting a 404 error on crates.io is now slightly less sad.

Svelte Frontend Migration Completed

In our January update, we announced that we were experimenting with porting the crates.io frontend from Ember.js to Svelte. This experiment has concluded successfully: the new frontend reached feature parity, went through a public testing phase in April, became the default at the beginning of May, and the Ember.js app has been removed from our repository.

We designed this change to be invisible for our users, since the new frontend is a 1:1 port of the previous design and functionality. For the team and our contributors, however, it is a big deal: the frontend is now built on a more modern framework, which should make it easier for new contributors to get started. It also allows us to iterate faster, as the source code viewer above demonstrates.

We want to thank the Ember.js team for a framework that served crates.io well for many years, and the Svelte team for making the transition so enjoyable.

Miscellaneous

These were some of the more visible changes to crates.io over the past six months, but a lot has happened "under the hood" as well:

• Search performance: Relevance-sorted search queries previously ranked every crate matching the query, which could take 1-2 seconds for short or common search terms. Ranking is now bounded to the 1,000 matching crates with the highest recent download counts.

• Reverse dependencies performance: The reverse dependencies endpoint no longer recomputes the full dependent set on every request. It is now served from a precomputed table kept in sync by database triggers, turning an expensive join into a bounded index scan and greatly reducing the chance of getting a timeout error.

• New ARCHITECTURE.md: If you've ever wondered how crates.io actually works, our ARCHITECTURE.md document got a complete rewrite. It is now organized around the high-level systems that make up crates.io and how they fit together, and includes walkthroughs of what happens when you run cargo publish, why a typical crate download never touches our API servers, and how download counts are derived from CDN access logs.

• Definition lists: READMEs now render Markdown definition lists, a widely used Markdown extension. Our markdown renderer comrak already supported them, the extension just wasn't enabled yet. Thanks to @mistaste for this contribution!

• CDN cache tags: Files uploaded to our static CDN now carry cache-tag metadata, allowing us to invalidate all cached files of a crate or a specific release in a single operation, instead of issuing one invalidation per file URL.

• Caching improvements: We removed a global Vary: Cookie response header that was preventing our CDNs from caching public API responses and frontend assets effectively. Per-user responses now use Cache-Control: no-store instead, resulting in better cache hit rates at the CDN edge.

• Accessibility: We have made crates.io friendlier to screen readers: decorative icons are now hidden from the accessibility tree, heading hierarchies have been fixed, and lists are marked up as proper lists. ARIA snapshot tests now ensure that regressions can't slip in unnoticed. We plan to continue to improve crates.io accessibility over the coming months.

• Git index performance: The background worker's local clone of the git index is now a bare and shallow repository, eliminating roughly 250,000 checked-out files and the full commit history from its disk, improving its performance as we see increased rates of crate publication. The periodic index squashing now goes through the GitHub API instead of generating large git packs locally, which had previously caused out-of-memory failures on the production worker.

Feedback

We hope you enjoyed this update on the development of crates.io. If you have any feedback or questions, please let us know on Zulip or GitHub. We are always happy to hear from you and are looking forward to your feedback!

Researchers from ETH Zurich in Switzerland, however, managed to create a new type of pixel that can simultaneously do both. This hypercharged pixel, called a Fourier pixel, can generate and sense arbitrary light fields and tap into a pixel’s full potential for carrying information by manipulating light’s intensity, oscillation phases, and polarization. The team reported its findings in a paper published yesterday in Nature.

We are one step closer to 1984 technology:

The telescreen received and transmitted simultaneously. Any sound that Winston made, above the level of a very low whisper, would be picked up by it; moreover, so long as he remained within the field of vision which the metal plaque commanded, he could be seen as well as heard. There was of course no way of knowing whether you were being watched at any given moment...

Keep your computer safe with BitDefender: https://bit.ly/BitdefenderNC (59% discount on a 1 year subscription)


Here are the top 40 Windows Command Prompt commands you need to know!! From using ipconfig to check your IP Address to using the shutdown command to automatically boot to bios, these commands are essential for any Windows user. Also, is your computer running slow? We show a series of commands that will speed up your computer without having to reinstall Windows. All of these commands should work on Windows 10 and Windows 11 and all you need to do is launch your windows command prompt (cmd).




🔥🔥Join NetworkChuck Academy: https://ntck.co/NCAcademy



**Sponsored by Bitdefender







SUPPORT NETWORKCHUCK
---------------------------------------------------
➡️NetworkChuck membership: https://ntck.co/Premium
☕☕ COFFEE and MERCH: https://ntck.co/coffee

Check out my new channel: https://ntck.co/ncclips

🆘🆘NEED HELP?? Join the Discord Server: https://discord.gg/networkchuck

STUDY WITH ME on Twitch: https://bit.ly/nc_twitch

READY TO LEARN??
---------------------------------------------------
-Learn Python: https://bit.ly/3rzZjzz
-Get your CCNA: https://bit.ly/nc-ccna

0:00 ⏩ Intro
0:15 ⏩ Launch Windows Command Prompt
0:18 ⏩ ipconfig
0:25 ⏩ ipconfig /all
0:33 ⏩ findstr
0:49 ⏩ ipconfig /release
0:56 ⏩ ipconfig /renew
1:15 ⏩ ipconfig /displaydns
0:56 ⏩ ipconfig /renew
1:29 ⏩ clip
1:47 ⏩ ipconfig /flushdns
2:09 ⏩ nslookup
2:41 ⏩ cls
2:51 ⏩ getmac /v
3:01 ⏩ powercfg /energy
3:10 ⏩ powercfg /batteryreport
3:28 ⏩ assoc
3:51 ⏩ Is your computer slow???
3:56 ⏩ chkdsk /f
4:07 ⏩ chkdsk /r
4:17 ⏩ sfc /scannnow
4:36 ⏩ DISM /Online /Cleanup /CheckHealth
4:45 ⏩ DISM /Online /Cleanup /ScanHealth
4:51 ⏩ DISM /Online /Cleanup /RestoreHealth
5:24 ⏩ tasklist
5:38 ⏩ taskkill
5:59 ⏩ netsh wlan show wlanreport
6:18 ⏩ netsh interface show interface
6:27 ⏩ netsh interface ip show address | findstr “IP Address”
6:30 ⏩ netsh interface ip show dnsservers
6:36 ⏩ netsh advfirewall set allprofiles state off
6:43 ⏩ netsh advfirewall set allprofiles state on
6:49 ⏩ SPONSOR - BitDefender
8:19 ⏩ ping
8:30 ⏩ ping -t
8:41 ⏩ tracert
8:59 ⏩ tracert -d
9:06 ⏩ netstat
9:12 ⏩ netstat -af
9:28 ⏩ netstat -o
9:38 ⏩ netstat -e -t 5
9:47 ⏩ route print
9:58 ⏩ route add
10:13 ⏩ route delete
10:21 ⏩ shutdown /r /fw /f /t 0


FOLLOW ME EVERYWHERE
---------------------------------------------------
Instagram: https://www.instagram.com/networkchuck/
Twitter: https://twitter.com/networkchuck
Facebook: https://www.facebook.com/NetworkChuck/
Join the Discord server: http://bit.ly/nc-discord




AFFILIATES & REFERRALS
---------------------------------------------------
(GEAR I USE...STUFF I RECOMMEND)
My network gear: https://geni.us/L6wyIUj
Amazon Affiliate Store: https://www.amazon.com/shop/networkchuck
Buy a Raspberry Pi: https://geni.us/aBeqAL
Do you want to know how I draw on the screen?? Go to https://ntck.co/EpicPen and use code NetworkChuck to get 20% off!!



#windows11 #commandprompt #cmd

The future of AI chips might not run on electricity. It might run on light.

In this video, we break down how Lightmatter is using photonic computing to attack one of the biggest problems in artificial intelligence: moving massive amounts of data between chips without wasting huge amounts of power. Lightmatter’s Envise processor uses light to perform AI calculations such as matrix multiplication, while its Passage platform uses optical interconnects to move data between AI chips at extreme speeds. The company has demonstrated real AI workloads including ResNet, BERT, and reinforcement learning models, while targeting the growing power and bandwidth crisis inside modern AI data centers. We also explore the Passage M1000 photonic superchip, Lightmatter’s collaboration with Qualcomm, its involvement in NVIDIA’s NVLink Fusion ecosystem, and why optical computing could become critical as AI clusters continue scaling. Could light-powered AI chips replace traditional electronic computing, or will photonics first transform how GPUs communicate within massive data centers?

#AIChips #Lightmatter #PhotonicComputing #Nvidia #ArtificialIntelligence #DataCenter #FutureTech

Add Laguna XS 2, XS 2.1, and S 2.1 support to the MLX model and create paths.

Read the source config to apply one quantization policy across dense and routed MoE layers. Keep the tied output head and router at source precision, quantize supported attention and expert projections, selectively promote sensitive expert down projections, and emit per-tensor metadata for mixed quantization blobs.

Correct dense expert loading, BF16 source-layout handling, expert global-scale shapes and dtypes, routing-score scaling, and mixed-precision expert dispatch. Gate/up and down projections select quantized or dense execution independently so promoted BF16 down projections do not force quantized gate/up weights through the dense fallback.

Optimize the forward pass with compatible gate/up fusion, sorted standard GatherMM and GatherQMM operations for larger prefills, model-local mlx.Compile closures for elementwise MoE work, and cache-backed 512-token prefill chunks. This keeps the implementation on maintained MLX operations without custom kernels.

Add focused tests for Laguna configuration variants, quantization policy and metadata, dense and routed expert loading, mixed-precision dispatch, compiled-versus-eager parity, fused projections, routing, and prefill chunking.

• review comments and S 2.1 performance fixes

Address renderer/parser selection and mixed-precision expert quantization review feedback.

Keep Laguna weights resident on Metal to prevent repeated paging of its large, sparsely accessed expert buffers. Scope this policy to Laguna GPU execution.

Remove obsolete 512-token prefill chunking now that the runner's 2048-token path is faster.

• review comments addressed

• fix create

Read more →

The post Zscaler Finds Critical AI Security Gaps Across Enterprises appeared first on IT Security News.

The post Zscaler Finds Critical AI Security Gaps Across Enterprises  appeared first on eSecurity Planet.

Read more of this story at Slashdot.

Read more →

The post Cyber Briefing: 2026.07.24 appeared first on IT Security News.

Sakana AI has updated its Fugu Ultra AI router to version 1.1, claiming gains of up to 7.9 points over v1.0. Independent verification doesn't exist yet. The update adds a Claude Code-compatible endpoint. The service remains unavailable in the EU.

The article Sakana claims its AI model router Fugu Ultra v1.1 now beats Fable 5 without even including it in the pool appeared first on The Decoder.

Ted Hardie, chair of our Board of Trustees, spoke to Internet Society and Foundation staff on 14 May 2026. After many years of excellent service, Ted's time on the board will conclude on 25 July 2026.

The post Carrying the Light of the Internet Forward: A Farewell Message from Board Chair Ted Hardie appeared first on Internet Society.

The post KnowBe4’s Unveils Custom AI Video Builder appeared first on IT Security Guru.

Read the full article on GamingOnLinux.

Google Fined Over Self-preferencing on Google Search

Google Play Restrictions Lead to Second Fine

Digital Markets Act Enforcement Brings Compliance Deadline

Commission Investigations Began in 2024

Read more →

The post Hotel Wi-Fi DNS Poisoning Attacks Hijack Microsoft 365 Accounts Without Phishing appeared first on IT Security News.

Ich weiß nicht, wie es in Ihren Schubladen aussieht, aber meine sind voll mit Kabeln, die ich wahrscheinlich nie wieder benutzen werde, weil die Technologie sich ziemlich weiterentwickelt hat. Zum Glück scheint sich USB-C durchzusetzen, denn es gibt keinen falschen Weg, diese Dinger anzuschließen. Aber nicht nur Smartphones, Tablets und Laptops verwenden diese Anschlüsse, sondern auch eine lange Liste von Gadgets.

Wir haben den Markt nach versteckten Perlen durchforstet: Gadgets, bei denen Sie denken werden: “Wow, ich wusste gar nicht, dass ich das brauche, aber es wird mein Leben so viel einfacher machen!” Schauen wir uns also an, mit welchen coolen Geräten Sie Ihre Typ-C-Kabel und -Anschlüsse nutzen können.

heat it Insektenstichheiler

PCWelt/heat it/Amazon

Wer im Sommer oder Urlaub oft von Mücken geradezu heimgesucht wird, wird sich besonders über dieses geniale Gadget freuen: Dieses winzige Gerät, das sich einfach per USB-C mit Ihrem Smartphone verbinden lässt, kann mit gezielter Wärme den Juckreiz von Stichen und Insektenbissen deutlich reduzieren.

Ähnlich wie größere Varianten, etwa diesen hier von Beurer, muss man den kleinen Stichheiler von heat it einfach nur per App aufladen und dann auf den Stich halten. Die Hitze erledigt dann den Rest und zersetzt die Proteine, die im Mückenstich dafür sorgen, dass die Stelle anschwillt, juckt und schmerzt. Ein echtes Must-have für den Sommer, und es kostet nicht mal 25 Euro.

Mini-Ventilator

KIMMOO / Amazon / PC-WELT

Ziemlich genial sind auch diese kleinen Ventilatoren, die man im Sommer einfach in der Hosentasche mitnehmen und bei Bedarf schnell einsetzen kann. Wer schon einmal bei 30 Grad in einer vollen S-Bahn saß und sich zumindest ein wenig frische Luft gewünscht hat, der wird dieses Gadget lieben.

Der Mini-Ventilator für unter 20 Euro mit USB-C-Ladeanschluss kann ganz einfach über Powerbanks, Computer, Laptops oder USB-Ladegeräte betrieben werden. Es gibt aber noch kleinere und günstigere Ventilatoren, die man direkt ans Handy anschließen kann, und gerade mal 2-3 Euro pro Stück kosten. Diese sorgen aber auch für einen weniger starken Luftstrom, daher würden wir eher die erste Variante empfehlen.

USB-C zu HDMI Adapter

Anker

Wenn Ihr Laptop über einen USB-C-Anschluss verfügt, Sie Ihren Monitor aber schon seit Ewigkeiten nicht mehr geupgradet haben, verfügt Ihr Bildschirm vermutlich nicht über einen Typ-C-Anschluss. Dieser Adapter von Anker löst dieses Problem für Sie, sodass Sie das normale HDMI-Kabel, das Sie an Ihren Monitor anschließen, mit diesem Gerät verbinden können.

Der Adapter unterstützt Auflösungen von bis zu 4K bei 60 Hz, was ziemlich beeindruckend ist. Dies ist auch eine raffinierte Möglichkeit, Ihr Smartphone oder Tablet an Ihren Monitor oder Fernseher anzuschließen. Das Gerät kostet circa 13 Euro, aber wir haben es schon für nur 13 Euro bei Amazon gesehen.

Mini-Schraubendreher

Amazon

Wenn Sie häufig an Ihrem Computer oder anderen Geräten herumschrauben müssen, ist dieser elektrische Mini-Schraubendreher vielleicht genau das Richtige für Sie. Dieser stiftförmige Schraubendreher verfügt über vier LED-Leuchten, damit Sie besser sehen können, woran Sie gerade arbeiten, und dreht sich 200 Mal pro Minute, sodass Sie die Arbeit schneller erledigen können.

Der Schraubendreher verfügt über 64 verschiedene Aufsätze, es sollte also für so gut wie jeden Einsatzzweck ein passender dabei sein. Er kann über USB-C aufgeladen werden und hält bis zu drei Stunden lang. Der Elektroschraubendreher kostet normalerweise 41 Euro, ist aber auch für 32 Euro im Angebot erhältlich.

USB-C microSD-Kartenleser

Ugreen / Amazon

Die meisten Laptops verfügen heutzutage nicht mehr über einen Kartenleser, daher muss man andere Wege finden, um Daten von diesen kleinen Dingern zu übertragen. Egal, ob Sie Daten von der Karte Ihrer Dashcam oder Ihrer Kamera übertragen möchten, dieser winzige Ugreen USB-C microSD-Kartenleser ist dafür bestens geeignet.

Der Kartenleser ist so klein, dass Sie ihn wahrscheinlich an einem Schlüsselbund befestigen können. Wenn Sie eine etwas vielseitigere Version bevorzugen, bietet Ugreen ein Modell an, das auch mit SD-Karten kompatibel ist und sowohl über USB-C- als auch USB-A-Anschlüsse verfügt. Alle diese Modelle kosten weniger als 10 Euro und sind daher eine lohnende Investition.

Anker Nano Power Bank

Anker

Eine Sache, die Sie unbedingt in Ihrer Tasche, Reisetasche oder in Ihrem Rucksack haben müssen, ist eine Powerbank. Denn man weiß schließlich nie, wann das Telefon einen mal im Stich lässt und nach einer Aufladung schreit. Die Anker Nano Power Bank ist zum Glück so klein, dass sie fast überall hinpasst.

Sie verfügt über einen faltbaren USB-C-Anschluss und einen Anschluss an der Seite, sodass Sie bei Bedarf zwei Geräte gleichzeitig aufladen können. Die Kapazität von 5.000 mAh reicht gerade aus, um Ihr Handy einmal vollständig aufzuladen, was in der Not entscheidend sein kann. Außerdem kostet sie gerade mal 26 Euro, ist aber immer wieder mal reduziert.

Endoskopkamera mit Licht

Ennovor

Auch wenn Sie diese Endoskopkamera von Ennovor nicht jeden Tag benutzen werden, kann sie doch sehr nützlich sein. Sie schließen sie einfach an Ihr Telefon an, installieren eine App und sehen alles, was Ihre Kamera macht. Mein Kollege schwört darauf und verwendet sie, um alles zu finden, was so hinter dem Schreibtisch verloren geht.

Gerade dann, wenn Sie am Auto arbeiten oder nach undichten Leitungen suchen, ist das Teil super nützlich. Da sie die Schutzklasse IP67 hat, können Sie sie sogar in Ihr Aquarium stellen. Die Kamera wird mit einem circa 5 Meter langen, halbstarren Kabel und diversem Zubehör geliefert, darunter ein Haken, ein Magnet und ein Spiegel. Sie können diese Kamera im Moment für um die 22 Euro kaufen.

Blukar Taschenlampe

Blukar

Egal, wer Sie sind oder wo Sie so unterwegs sind: Sie brauchen eine Taschenlampe. Je kleiner, desto besser, denn so können Sie sie in jede Tasche stecken. Dieses Modell von Blukar verfügt über einen eingebauten 1800mAh-Akku, den Sie mit einem der vielen Typ-C-Kabel aufladen, die Sie so herumliegen haben.

Mit einer einzigen Ladung können Sie bis zu 16 Stunden arbeiten, was ziemlich gut ist. Sie können zwischen vier verschiedenen Blitzmodi wählen, darunter auch einer, der Ihnen hilft, Hilfe zu signalisieren. Außerdem kostet die kleine Taschenlampe weniger als 10 Euro. Es gibt also keine Ausrede, sich diesen Tipp entgehen zu lassen.

Samsung Flash-Laufwerk

Samsung

Die allermeisten Flash-Laufwerke haben einen USB-A-Anschluss, aber dieses von Samsung besitzt einen Typ-C-Anschluss. Mit Übertragungsgeschwindigkeiten von bis zu 400 MB/s können Sie Dateien im Handumdrehen verschieben. Das Coole an diesem USB-Stick ist, dass Sie ihn sogar in Ihr Smartphone stecken können, um 4K-Videos direkt darauf aufzunehmen.

Das Samsung Type-C Flash-Laufwerk ist in verschiedenen Speicheroptionen erhältlich, angefangen bei 64 GB bis hin zu 512 GB.

Mini Luftpumpe

PCWelt/Cycplus/Amazon

Ebenfalls perfekt für den Sommer geeignet ist diese kleine Luftpumpe von Cycplus, die unterwegs in jede Tasche passt. Sie kann nicht nur einen Fahrradreifen innerhalb von zwei Minuten auf Knopfdruck wieder aufpumpen, sondern wird auch per USB aufgeladen. Sie eignet sich laut Hersteller für Mountainbikes, Rennräder, Motorräder und sogar Autos!

Neben der Luftpumpe selbst lässt sich dieses praktische Gadget auch als Taschenlampe oder Powerbank für unterwegs einsetzen. Alles Dinge, die man auf einer Fahrradtour sehr gut gebrauchen kann. Und für den Preis von nur 45,99 Euro wirklich empfehlenswert, wenn Sie schnelle Hilfe bei platten Reifen benötigen. Im Angebot kostet sie sogar nur 37 Euro.

Leselampe mit Buchklemme

Gritin / Amazon

Wer auch gerne und viel liest, und das teilweise bis spät in die Nacht hinein, wird sich über dieses kleine Teil hier freuen: eine Leselampe, die Sie einfach an Ihr Buch klemmen können. Das ist jetzt vielleicht nichts bahnbrechend Neues, doch mit insgesamt drei Farbtemperaturen und fünf verschiedenen Lichtmodi können Sie individuell anpassen, wie viel Licht Sie zum Lesen brauchen.

Die Leselampe von Gritin kostet bei Amazon gerade mal 13 Euro und besitzt einen 1200-mAh-Akku, der je nach Nutzung bis zu 80 Stunden durchhält. Danach können Sie ihn einfach per USB wieder aufladen. Den Hals der Lampe können Sie nach Belieben hin- und herschwenken, und es gibt sogar eine kleine Ladeanzeige. Was will man mehr?

Externes DVD-Laufwerk

Amicool

Wenn Ihr Laptop wie viele heutzutage kein DVD-Laufwerk besitzt, dann wird Ihnen dieses kleine Gerät sehr nützlich sein. Dieses externe DVD-Laufwerk von Amicool wird über USB-C (oder USB-A) an Ihren Laptop angeschlossen und bietet Ihnen das optische Laufwerk, das Sie manchmal benötigen.

Es kann DVDs und CDs problemlos lesen und brennen, sodass Sie Software installieren, Dateien kopieren, Daten sichern, Spiele spielen und vieles mehr können. Sie müssen nicht einmal Treiber installieren, da dieses Gerät Plug-and-Play-fähig ist. Normalerweise kostet es 28 Euro, aber oft ist es schon für etwa 20 Euro zu haben, was ein absolutes Schnäppchen ist.

Wiederaufladbare Handwärmer

Amazon / PC-WELT

Wenn es langsam wieder kälter wird, wünscht man sich oft nichts sehnlicher, als seine Hände etwas schneller aufwärmen zu können. Das geht natürlich auch mit Handschuhen oder einer Tasse Tee, doch diese Handwärmer für 20 Euro sind nicht nur wiederaufladbar, sondern halten Ihre Finger mit einer einzigen Ladung auch bis zu 24 Stunden lang warm.

Die beiden Gadgets verfügen über einen Temperatursensor-Chip, mit dem Sie eine von drei Temperaturen für eine präzise Steuerung auswählen können. Außerdem stehen verschiedene Farben zur Auswahl, wodurch sie sich auch bestens als Geschenk eignen.

KARR Security System Vulnerability Affects Dealer-installed Hardware 

iPhone App Update Fixes KARR Alarm Flaw 

Hidden KARR Security System Complicates Updates 

Shared Bluetooth Key Exposes KARR Alarm Devices

Privacy Concerns and Recommended Action

The post Hotel Wi-Fi DNS Poisoning Attacks Hijack Microsoft 365 Accounts Without Phishing appeared first on GBHackers Security | #1 Globally Trusted Cyber Security News Platform.

Können Geräte keine Verbindung zum WLAN herstellen oder läuft die Datenübertragung plötzlich lediglich noch im Schneckentempo, ist die Ursache oftmals schwer zu bestimmen. Der Fehler kann an veralteten oder beschädigten Treibern liegen, an einem überlasteten oder falsch konfigurierten Router, an Störsignalen durch benachbarte Funknetze oder daran, dass der Client zu weit vom Router entfernt ist.

Um sich einen Überblick über den WLAN-Status zu verschaffen und damit diese Probleme zu lösen, bringt Windows ein spezielles Tool mit: Es liefert Ihnen in Sekundenschnelle eine Übersicht zu Ihrem Netzwerk. Hierzu benötigen Sie die Kommandozeile oder Powershell: Starten Sie das gewünschte Eingabeprogramm, indem Sie in der Taskleiste in das Suchfeld Eingabeaufforderung oder Power shell eingeben.

Achten Sie darauf, dass der Treffer markiert ist und klicken Sie dann auf der rechten Seite auf „Als Administrator ausführen“. In der Eingabeaufforderung tippen Sie den Befehl netsh wlan show wlanreport ein und bestätigen mit Enter. Windows erzeugt nun den WLAN-Bericht und speichert ihn in der Datei „wlan-report-latest.html“ in dem Ordner „C:\ProgramData\Microsoft\Windows\WlanReport“.

Foundry

Am besten markieren Sie diesen Pfad direkt in der Eingabeaufforderung mit der Maus und übernehmen ihn mit Strg-C in die Zwischenablage. Öffnen Sie danach das Suchfeld in der Taskleiste, kopieren Sie den Pfad mit Strg-V hinein und bestätigen Sie mittels Enter. Windows ruft nun Ihren Standardbrowser auf und lädt die HTML-Datei des Berichts. Falls das nicht funktioniert, steuern Sie den Ordner über den Explorer an.

Allerdings ist das Verzeichnis in den Standardeinstellungen versteckt – Sie müssen es zunächst über die Einstellungen des Explorers sichtbar machen. Klicken Sie anschließend doppelt auf die HTML-Datei, um sie im Browser zu öffnen. Im Bericht sehen Sie ganz oben eine Übersicht der WLAN-Ereignisse der letzten 48 Stunden. Sie können über einzelne Verbindungen mit der Maus fahren, um Details einzusehen.

Die Ereignisse sind mit farbigen Punkten und Buchstaben gekennzeichnet: Ein schwarzes X auf rotem Grund steht beispielsweise für einen Fehler, N zeigt an, dass die Verbindung zu einem WLAN unterbrochen wurde. Weiter unten finden Sie bei „Report Info“ das Datum, an dem der Bericht erzeugt wurde, sowie die Berichtsdauer.

Foundry

Darunter folgt die „General System Info“, die Details zur Hardware, zum Bios und zur Windows-Version verrät. Diese Daten können beispielsweise bei Kompatibilitätsproblemen helfen. Der Abschnitt „User Info“ nennt einige grundlegende Benutzerdaten:

Darunter finden Sie bei „Network Adapters“ die installierten Netzwerkadapter, und zwar sowohl den oder die Hardwareadapter sowie Softwareadapter, beispielsweise für eine VPN-Verbindung oder für Bluetooth und virtuelle Adapter. Bei „Script Output“ beginnt die Anzeige der Ausgabebildschirme von einigen Troubleshooting-Tools in Windows.

So liefert der Befehl ipconfig /all zum Beispiel Angaben zur aktuellen Netzwerkkonfiguration sämtlicher Adapter. Das Kommando netsh wlan show all ermittelt Daten zu den installierten Netzwerktreibern, Details zu Ihrem WLAN und den in der Vergangenheit genutzten Access Points.

Foundry

Darüber hinaus führt Windows für den Bericht den Befehl certutil aus, der Ihnen weitere Einzelheiten über die verschiedenen WLAN-Profile präsentiert. Weiter unten folgt im Bereich „Summary“ ein Überblick über die erfolgreichen und die gescheiterten WLAN-Verbindungen. Dort nennt der Bericht auch die Gründe, warum beispielsweise der Kontakt zu einem WLAN verlorengegangen ist.

Diese Informationen sind oft besonders hilfreich, wenn es um die Fehlersuche im Netzwerk geht. Ganz am Schluss des Berichts steht der Abschnitt „Wireless Sessions“: Dort sind den WLAN-Adaptern unter anderem Informationen zur Verbindungsmethode und der SSID des WLAN zugeordnet. Des Weiteren stehen an dieser Stelle die Event-IDs und Beschreibungen der Ereignisse beim Aufbau der Verbindung.

Auch daraus lassen sich Schlussfolgerungen für die Lösung von Verbindungsproblemen ziehen.

Lesetipp: Die besten Tools für WLAN & Heimnetz

Read more →

The post Next.js Patches Nine Security Flaws Enabling SSRF, Middleware Bypass, DoS, and Internal Endpoint Disclosure appeared first on IT Security News.

The post Next.js Patches Nine Security Flaws Enabling SSRF, Middleware Bypass, DoS, and Internal Endpoint Disclosure appeared first on GBHackers Security | #1 Globally Trusted Cyber Security News Platform.

The post Meta Develops Switchboard to Route Simpler AI Tasks to Cheaper Models appeared first on TechRepublic.

The Freiburg, Germany-based AI lab says FLUX 3 is jointly trained across those modalities rather than assembling separate image, video and audio models behind a common interface.

That distinction is central to the company's pitch: BFL wants enterprises to think about creative generation, simulation, computer use and robotics as connected applications of a single capability it calls visual intelligence — models, in the company's words, "that can perceive, predict, and act across physical and digital environments." This release marks BFL's first public video generation model.

FLUX 3 will be offered through four product lines: FLUX 3 Video, FLUX 3 Image, FLUX 3 Action and the upcoming, open source FLUX 3 Dev. FLUX 3 Video, with optional native audio generation, and FLUX 3 Action are entering a gated "Early Access" program now, to which anyone can apply, but which BFL must approve.

There is presently no public access through BFL's application programming interface (API) or those of partners yet, but the company says FLUX 3 Image will roll out in the coming weeks, followed by general availability. The limited initial availability rollout echoes the release strategies of new models from other frontier labs in the U.S. lately, including Anthropic and OpenAI, though those were ostensibly for security concerns and due to government request.

What the company has not announced is pricing, production service-level commitments, evaluation methodology, sample sizes, rater counts or any image-model benchmarks at all. Enterprise buyers therefore cannot yet calculate total cost of ownership or independently reproduce the video comparisons.

Another big notable omission: FLUX 3 is not launching with downloadable weights at this time, nor an open source license. BFL says faster and open-weight versions will arrive later this year, and its technical blog names FLUX 3 Dev as "open-weight access to a multimodal backbone, for content creation (video, audio and image) and action prediction" — a considerably broader commitment than any previous FLUX Dev release, all of which covered images only.

But it arrives last in the sequence. Developers accustomed to receiving a locally deployable FLUX variant alongside — or soon after — a major model announcement will have to wait. That delay does not negate the company's commitment, but it is disappointing given the role open weights have played in FLUX's adoption thus far.

Flux 3 is rated higher than the competition, but missing pricing and benchmarking details may prevent rapid enterprise adoption

BFL has published several benchmark comparisons, but they're qualified as preliminary — with full benchmark results and methodology to be published later during broader general availability.

In early head-to-head preference testing on 10-second, 720p text-to-video clips with audio, the company says FLUX 3 was preferred over Luma Ray 3.2 in 93% of comparisons, Runway Gen-4.5 in 77%, Grok Imagine Video in 69%, Kling v3 Pro in 60%, Happy Horse v1 in 59%, Happy Horse 1.1 in 57%, and both Seedance 2.0 and Google's Gemini Omni Flash in 52%.

One caveat travels with every one of those figures, and it comes from BFL itself. The chart carrying the results is labeled a "preliminary evaluation of an early FLUX 3 candidate" — meaning the numbers describe a pre-release checkpoint rather than the model now entering early access. That cuts both ways: the shipping model may perform better, but nothing published today measures what customers will actually call.

Luma Ray 3.2 and Runway Gen-4.5, where FLUX 3 posted 93% and 77%, are the softest comparisons on the list — established products, but not the models currently setting the pace in independent video rankings. Those are real wins, and they are the ones least likely to change an enterprise shortlist.

Seedance 2.0, at 52%, is a statistical coin flip against a model most Western enterprises cannot currently procure. ByteDance indefinitely postponed Seedance 2.0's international rollout after Netflix, Warner Bros., Disney, Paramount and Sony sent legal threats over alleged systematic copyright infringement, and that suspension remains in place. Tying a frozen product is neither a strong claim nor a damaging one.

Gemini Omni Flash, also at 52%, matters much more. Omni is the closest large-platform analogue to what FLUX 3 is attempting — multimodal input, video and audio-aware creation, conversational editing — and by BFL's own measurement, the two are indistinguishable on 10-second text-to-video quality.

Google's advantage in that matchup is that Omni is generally available via Google's Gemini API for $0.10 per second of generated 720p video, or a 10-second clip for around.

One regional wrinkle matters for a German company's home market. Editing uploaded video is unavailable to Omni Flash users in the European Economic Area, Switzerland and the United Kingdom, though editing video the model itself generated is permitted. A European enterprise that wants to run its existing footage through a generative editing pass cannot currently do so on Omni Flash.

Here's a rough guide for enterprises considering which video models to rely upon:

One architecture for media generation and physical action

FLUX 3 builds on Self-Flow, BFL's method for aligning multimodal understanding and generation within one architecture, publicized back in March 2026.

The company says it significantly scaled up compute and data to train across video, images and audio simultaneously, and that testing showed video generation and action prediction do not require separate foundations — the same architecture could be extended to action prediction without sacrificing what it learned from video.

"We place vision at the center of our approach because it is the most signal-rich medium of the physical world. Images convey structure, images and video teach spatial relationships, video teaches dynamics, and actions reveal causal relationships. But vision alone is not the complete picture," said Robin Rombach, co-founder and CEO of BFL, in a pre-release statement provided to VentureBeat. "True intelligence means perceiving the world: predicting how it will change, taking action, and learning from the results. Joint training within one unified architecture is what will get us there, because each training modality strengthens the others. Audio conveys timing, prosody, and physical events that elude vision. Language conveys goals, abstractions, and instructions that pixels cannot easily express."

He put the case more bluntly elsewhere in the announcement: "You can't cheat reality. A model that only learns images can only generate images. But the world is not made of still frames. It moves, sounds, changes, and responds."

BFL says FLUX 3 targets creative tooling, media, design, e-commerce and physical AI, supporting video generation with synchronized audio, precise image editing, product and material consistency across motion, multilingual generation and robotic action prediction. It is already being tested by Canva, Burda, Magnific (formerly Freepik), Krea and Picsart.

For creative software companies, the appeal is consolidation. A single foundation could potentially support storyboarding, image editing, product rendering, video variation and localization without repeatedly translating assets and instructions between disconnected models.

For robotics teams, the potential value is data efficiency. Models that already encode motion, object behavior and physical change may need less task-specific robot training than systems starting from raw demonstrations.

What FLUX 3 Video can actually do

The video tier is the most concretely specified part of the launch, and it settles a question that had been circulating as rumor: FLUX 3 generates clips of up to 20 seconds with audio in a single generation.

Every video output comes with native audio. For comparison, HappyHorse 1.0 tops out at 15 seconds of 1080p with synchronized audio — though BFL has not stated what resolution its 20-second clips run at, and its published evaluations were conducted at 720p. Still, a 20-second long clip from a single prompt is among the longest yet achieved, matching OpenAI's discontinued Sora model.

The capability list BFL published covers:

• Text-to-video generation.

• Image-to-video generation, either animating from a starting frame or using images as visual references.

• Video-to-video generation from a reference clip, carrying elements such as a specific character into a new scene or context.

• Generative video-audio continuation from existing video and audio input.

• Keyframe-to-video generation for controlled transitions between defined moments.

• Multilingual dialogue.

• A broad range of visual styles and aspect ratios, from candid camcorder footage to animation and cinematics.

• Typography generation and animated design.

• Agentic chaining of individual clips into longer, multi-shot sequences.

That last item is the one enterprise video teams should look at hardest. BFL claims the capabilities combine to produce sequences lasting several minutes, with visual references keeping characters consistent across scenes. If that holds up under production conditions, it addresses the constraint that has kept generative video out of most commercial pipelines: not clip quality, but continuity across shots.

It is also the capability where competition is most direct. HappyHorse 1.1's headline upgrade is R2V, or Reference-to-Video, which accepts multiple character reference images to hold identity stable across generated footage — the same problem, approached at the input layer rather than through agentic clip chaining. Alibaba also claims zero-drift lip sync and has specifically targeted the artifacts that mark commercial AI video as synthetic, including facial oiliness and over-sharpening. Character consistency is where this category is being contested, and both companies know it.

BFL says FLUX 3 Video is already particularly strong at human facial expressions, associating sounds with physical events, and multilingual output. On the image side, the company says preliminary evaluations conducted during midtraining show significant improvement over earlier FLUX versions in complex prompt handling and text generation, including high-accuracy text in multiple languages. It published no image benchmarks or win rates.

FLUX-mimic tests whether video models can become robot models

BFL is applying its unified-architecture thesis through FLUX-mimic, a video-action model built on FLUX 3 and developed with Swiss firm Mimic Robotics, one of the first partners to receive early access.

The technical blog describes two distinct routes to action prediction: integrating native action prediction directly into FLUX 3, scaling up the initial Self-Flow work; and using the pretrained video backbone as a dynamics-aware foundation from which specialized action models can be finetuned with limited task-specific data. FLUX-mimic is the second route — the FLUX 3 backbone combined with mimic's robot-learning and production-deployment expertise in dexterous manipulation.

FLUX-mimic is designed for general-purpose robotic manipulation: helping robots understand a visual scene, predict the consequences of an action, and adapt to new tasks with far less task-specific data.

BFL and Mimic Robotics say that depending on task difficulty, the model can be finetuned for a specific manipulation task with as little as 30 minutes of robot data, where prior approaches have required 30 or more hours.

"The hardest part of robotics is data," said Elvis Nava, CTO of Mimic Robotics, in a statement provided to VentureBeat. "Every new task normally means hours of a robot repeating itself. Because FLUX-mimic is built on top of frontier video models that already understand how the physical world behaves, it picks up a new task in minutes, not days. This way, we can leapfrog the current state of the art in robot learning."

BFL argues that a model trained only on images cannot understand a world that "moves, sounds, changes, and responds," and that physical understanding is what produces convincing generated footage. Google makes a nearly identical claim for Gemini Omni.

Its developer documentation cites "world knowledge" that combines "an understanding of physics" with Gemini's grasp of history, science and cultural context. Its marketing is blunter still: "Most AI models just predict the next pixel to build a narrative or an image. Gemini Omni is different," the company posted in June, crediting the model with "an intuitive understanding of forces like gravity, kinetic energy, and fluid dynamics for more realistic movements that follow real-world logic."

The practical consequence for enterprise buyers is that world-model language is not a differentiator. Two of the three leading video systems now market physical understanding as their central advantage, and neither has published a benchmark that measures it.

There is no standard test for whether generated water behaves like water, whether a dropped object falls at a plausible rate, or whether a sound arrives when the impact does. Human preference ratings capture some of it indirectly. Nothing else on offer captures it at all.

Open weights helped make FLUX an industry standard

BFL officially launched in summer 2024 and gained a name for itself in the AI industry in the intervening two years for its commitment to open sourcing high-quality AI image models beloved by developers, creatives, and enterprises.

The company's founders, including Rombach, Andreas Blattmann and Patrick Esser, previously helped create VQGAN, latent diffusion and Stable Diffusion, the latter the open source technology that kicked off broad AI generation capabilities for the masses and currently used by many AI image generators and companies.

That reach translated into commercial distribution. FLUX models now power generative features inside Adobe Photoshop, Picsart and Nous Research's Hermes Agent, among other platforms, and the company cites film director Martin Scorsese among professional users.

Wired magazine described Black Forest Labs as a relatively small company that nevertheless became a leading competitor to Silicon Valley's largest AI labs, with FLUX models ranking near the top of image benchmarks and becoming some of the most downloaded text-to-image models on AI code sharing community Hugging Face. The company says it now runs a 100-person team across Freiburg and San Francisco.

FLUX.1 Dev, FLUX.1 Kontext Dev, FLUX.1 Fill Dev and related control models, released shortly after the firm's launch, gave researchers and creative-tool developers access to downloadable checkpoints, local inference and integrations with frameworks including Hugging Face Diffusers and ComfyUI. FLUX.1 Kontext Dev, for example, was released as an open-weight model for research and noncommercial use, with generated outputs permitted for commercial purposes under the applicable license.

The company continued that pattern with FLUX.2 Dev in late 2025, a 32-billion-parameter open-weight model combining generation and multi-reference editing. Black Forest Labs called it the strongest open-weight image generation and editing model available at launch and released weights, reference inference code and optimized implementations for consumer Nvidia GPUs.

FLUX 3 Dev raises the stakes on that evaluation. Previous Dev releases were image models. This one is described as a multimodal backbone spanning video, audio, image and action prediction — meaning a single license will govern whether a company can locally deploy a model that touches both content production and physical machinery. BFL hasn't yet shared information about its license, the parameter count, quantizations or hardware requirements.

The company frames open weights as an enterprise feature rather than a community gesture, arguing they enable secure, low-latency local deployment for applications like robotic control systems and let teams adapt FLUX 3 to their own data, products and workflows.

The financial backing behind FLUX 3 is worth noting alongside the technical claims. Black Forest Labs is valued at $3.25 billion and has raised more than $450 million from investors including a16z, AMP, Salesforce Ventures, Nvidia, General Catalyst, Adobe Ventures, Figma Ventures, Canva and Deutsche Telekom's T.Capital.

This wave of VentureBeat Pulse Research examines the enterprise RAG and context layer: what feeds AI agents their business context, which retrieval systems enterprises run, how they buy and measure them, where the architecture is heading, and — most revealingly — how often that context is already failing them.

The central finding is a context gap — the distance between how confidently enterprise agents answer and how reliable the context beneath them actually is. A majority of enterprises (57%) report that in the past six months their AI agents produced confident but wrong answers they traced to missing or inconsistent business context, and more than half of those said it happened more than once. This is not a fringe failure: retrieval is the primary context source for 38% of enterprises, more than any other approach, so when retrieval is thin or inconsistent, the errors it produces are wearing the agent’s authority. The infrastructure to fix it is being built — 58% already run or are building a governed semantic layer — but for most it is not yet in production.

Underneath, the market is consolidating in a direction that surprises. Provider-native retrieval — OpenAI’s file search (40%) and Google’s Vertex AI Search (38%) — already leads every dedicated vector database, and enterprises expect hybrid retrieval to dominate by the end of 2026 (34%). Yet a plurality (36%) say they intend to keep best-of-breed standalone tools rather than consolidate onto a provider’s native context stack, and a majority (57%) plan to switch or add a provider within the year. Stated preference and actual usage are pulling in opposite directions — the market is buying provider-native while insisting it wants independence.

Methodology

VentureBeat fielded this survey as part of its ongoing Pulse Research series. This survey focused on enterprise RAG infrastructure and the context layer — the retrieval systems, semantic layers, and context sources that feed AI agents. Responses are filtered to organizations with more than 100 employees (n=101); the survey drew no responses from organizations of 100 or fewer, so the full sample qualifies. All responses are from a single Q2 2026 (June) wave, so the report reads cross-sectionally and does not infer month-over-month trends. Several questions were multiple-select, so those shares can sum to more than 100%.

By organization size the sample concentrates in the mid-market: 251–1,000 employees (31%) and 101–250 (31%) lead, with 1,001–5,000 (20%), 5,001–10,000 (12%), and 10,001+ (7%) above them. By role it spans managers (39%), individual contributors (27%), the C-suite (16%), and VPs and directors (14%); on purchasing authority it is buyer-credible, with 46% final decision-makers and another 26% recommenders or influencers. Technology/Software is the largest industry at 20%, followed by Healthcare/Life Sciences (11%) and a broad spread across retail, transportation, financial services, manufacturing, and education.

At 101 respondents this is a modest sample and should be read as a directional signal rather than a precise measurement; it is self-selected and is not a probability sample. It is best read as the view from organizations actively standing up RAG and context infrastructure rather than from the largest operators.

Finding 1: Confident and wrong

More than half have traced agent errors to bad context

We asked whether, in the past six months, enterprises had traced a confident but wrong agent answer to missing or inconsistent business context. Most had.

This is the report’s defining number. A majority of enterprises (57%) have already had an AI agent produce a confident, wrong answer they traced to bad context — wrong metrics, stale definitions, or missing documents — and more than half of those have seen it happen more than once. Only 28% report no such failure, and a small remainder either don’t run agents on enterprise data or don’t trace root cause closely enough to know.

The failure mode is specific and dangerous: the model is not obviously hallucinating; it is confidently wrong because the context feeding it was thin or inconsistent. Everything else in this report — what enterprises retrieve, how they govern it, and what they plan to build — is downstream of this problem.

Finding 2: RAG is the default context source

Retrieval feeds more agents than any other method

We asked what an enterprise’s AI agents primarily use to understand its data. Retrieval leads by a wide margin.

Retrieval is the backbone of enterprise context. For 38% of organizations, RAG over documents or a vector index is the primary way agents understand the business — nearly twice the share of the next approach, a governed semantic layer or ontology (21%). Mixed approaches (14%), direct live-system queries (10%), and long-context loading (6%) fill out the rest, and only 2% let agents run on the model’s general knowledge alone. The concentration matters in light of Finding 1: because so much enterprise context flows through retrieval, the quality of that retrieval is the quality of the answer. When RAG is the default source, thin retrieval is not an edge case — it is the main failure surface.

One approach is notable for its absence from these answers: customizing model weights, also known as fine-tuning. Every leading source of business context is injected at run time. Our most recent direct measurement of fine-tuning comes from our April–May survey wave (a separate survey, n=136), where fine-tuning capabilities ranked last of six factors in model selection at 5% — even as 26% of that sample still named fine-tuning and customization an investment they expect to grow. Fine-tuning has fallen out of the primary selection conversation; context injection is how enterprises make agents knowledgeable about their business.

Finding 3: Provider-native retrieval already leads the vector databases

OpenAI file search and vertex AI search top the dedicated tools

We asked which retrieval systems enterprises run in production today. The answer favors the model providers and hyperscalers over the specialists.

The dedicated vector database is no longer the center of the RAG stack. OpenAI’s file search (40%) and Google’s Vertex AI Search (38%) lead — provider-native and hyperscaler-native retrieval — ahead of every purpose-built vector database. Among the specialists, the most-used is the one enterprises already run for other reasons (Elasticsearch/OpenSearch, 20%) and the open, embedded option (pgvector, 12%); the pure-play vector databases that define the category — Weaviate, Qdrant, Pinecone, Milvus — each sit in single digits to low double digits. Notably, 13% of enterprises say they still run no production RAG at all. As with the platforms in the parallel infrastructure wave, enterprises are gravitating to retrieval that comes bundled with tools they already buy.

The shape of this finding held across both Q2 waves. In April–May (n=161), provider-built retrieval led usage there too, while every dedicated vector database remained marginal — the most-used standalone vector database peaked at 8% of that sample — and the hybrid, pluralistic future was already the consensus expectation (34% expected hybrid retrieval to dominate, with another 29% expecting multiple architectures by use case). Two waves, consistent picture: the category that coined the “vector database” term is being collected by the platforms enterprises already buy from.

Finding 4: But they say they want to keep best-of-breed

A plurality resist consolidating onto a provider’s native stack

We asked how enterprises will respond as model providers bundle retrieval, memory, and orchestration into their platforms. Their stated intent cuts against their current usage.

Here is the tension at the heart of the stack. Even as provider-native retrieval leads in practice (Finding 3), a plurality of enterprises (36%) say they intend to keep best-of-breed standalone tools rather than consolidate onto a provider’s native context stack — well ahead of the 21% who plan to consolidate. Another 21% expect a mix, and 9% intend to build and own the layer themselves. The gap between what enterprises run and what they say they want is the strategic question of the category: they are adopting bundled retrieval for convenience while asserting they will preserve independence. Which impulse wins — the pull of the provider bundle or the stated preference for modular control — will shape the retrieval market more than any single tool.

Finding 5: Hybrid retrieval is the consensus bet

Vector-only retrieval is already seen as insufficient

We asked which retrieval architecture enterprises expect to dominate their production RAG systems by the end of 2026. The field is converging — with a large share still unsure.

The architecture is settling on hybrid. A third (34%) expect hybrid retrieval — embeddings combined with reranking and access controls — to dominate their production systems by the end of 2026, three times the 11% who expect vector-only retrieval to prevail. That is a notable signal: the pure vector-search approach that launched the category is already viewed as insufficient on its own, superseded by pipelines that add reranking for accuracy and access controls for governance — the very access controls whose absence produces the failures in Finding 1. Tellingly, the second-largest answer is uncertainty: 17% simply don’t know, and another 14% expect to move beyond a dedicated vector layer entirely toward tool-first or long-context retrieval. The consensus is not a single tool but a layered pipeline — and it is not yet fully formed.

Finding 6: The governed context layer is being built now

Most run or are building a semantic layer — few in production

We asked whether enterprises use a governed semantic or context layer to give agents and BI a shared understanding of their data. Most are on the path; fewer have arrived.

The fix for the context gap is under construction. Well over half of enterprises (58%) either run a governed semantic layer in production (25%) or are piloting and building one (34%), and a further 17% are actively evaluating — meaning three-quarters are engaged with the idea in some form. But the balance is telling: more are building than have shipped, so for most enterprises the shared, governed definition layer that would prevent the "confident but wrong" failures of Finding 1 is still a work in progress. The semantic layer is the industry’s answer to inconsistent context; this wave catches it mid-construction, ambition well ahead of production.

Finding 7: Bought on ingestion and simplicity, watched for correctness

Selection favors operability; monitoring favors correctness and security

We asked what matters most when enterprises choose a retrieval system, and what they track once it is running. Both answers lean practical.

Enterprises choose retrieval systems on operability. Ease of data ingestion (36%), latency and performance (32%), and operational simplicity (29%) lead the selection criteria — ahead of retrieval accuracy and access control (23% each), the two factors most directly tied to the failures in Finding 1. Once systems are running, the emphasis shifts toward trust: the most-tracked metrics are response correctness (42%) and security and access control (38%), ahead of latency (28%), operational stability (27%), and answer relevance (23%).

Satisfaction with current systems is moderately positive but not enthusiastic — on a five-point scale, overall satisfaction averages 4.0, with ease of implementation and value for money both near 3.9. Enterprises buy for how easily a system runs and watch it for whether it can be trusted.

Finding 8: A retrieval reshuffle is coming

A majority plan to change providers — and the vector specialists are gaining interest

We asked whether enterprises plan to change or add a retrieval provider, and which they are considering. The consideration set differs from today’s stack.

The retrieval stack is not settled. While 43% have no plans to change, a small majority (57%) intend to switch or add a provider within twelve months, and a quarter (26%) within the next quarter. The consideration set is where it gets interesting: provider-native retrieval still leads what enterprises are evaluating (OpenAI 22%, Vertex AI Search 21%), but the open-source vector specialists punch above their current footprint — Qdrant (14%) and Milvus (13%) draw more switching interest than their present usage (10% and 6%) would suggest. Read with Finding 4, the picture is a market in flux: enterprises run provider-native today, are evaluating a broader field, and say they want to keep their options open. The reshuffle ahead will test whether best-of-breed intent survives contact with the convenience of the bundle.

The bottom line: A context gap that more retrieval alone won’t close

Organizations with more than 100 employees are wiring agents into their business faster than they can guarantee the context those agents run on. Retrieval is the default source of enterprise context, and it increasingly comes from the model providers and hyperscalers rather than the dedicated vector databases — yet a majority of enterprises have already watched agents answer confidently and wrongly because that context was thin or inconsistent. The failure is not exotic; it is the predictable result of pointing authoritative-sounding agents at an unreliable foundation.

The industry’s answer — a governed semantic layer, hybrid retrieval with reranking and access controls — is being built but is mostly not yet in production, and enterprises are pulled between the convenience of provider-native bundles and a stated preference for best-of-breed independence. At 101 respondents in a single Q2 wave this is a directional read, skewed toward the mid-market — but the direction is clear: the context layer is the next contested tier of the AI stack, and right now agents are running ahead of it. The context gap is not a retrieval-volume problem that more documents or bigger indexes will solve on their own; it is a problem of governed, consistent, access-aware context. The open question for later waves is whether enterprises finish building that layer before the confident-but-wrong failures move from the lab into decisions that matter.

Based on survey responses from 101 qualified enterprise respondents (100+ employees), drawn from a single Q2 2026 (June) wave. At this sample size the results should be read as a directional signal rather than a precise measurement — it's a self-selected sample, not a probability sample, and skews toward the mid-market. Respondents include managers, individual contributors, VPs/directors, and the C-suite, with strong purchasing authority, across technology, healthcare, retail, transportation, financial services, manufacturing, and education.

Zenity Labs uncovered "AgentForger," a vulnerability in OpenAI's Agent Builder that let a single manipulated ChatGPT link create an autonomous agent on an employee's behalf. The agent inherited the victim's identity and access rights, bypassed approval requirements through the malicious prompt, and pulled new instructions from the attacker's inbox every five minutes.

The article One tampered ChatGPT link could spawn a rogue AI agent that took orders from an attacker every five minutes appeared first on The Decoder.

Wo du uns folgen kannst: Facebook, Reddit, Google News, X, Threads

Read more →

The post New Kimi K3 AI Agent Uncovers Redis Remote Code Execution Flaws in Just 27 Minutes appeared first on IT Security News.

DashResume helps you build ATS-friendly resumes, optimize applications for specific jobs and create unlimited cover letters.

(via Cult of Mac - Your source for the latest Apple news, rumors, analysis, reviews, how-tos and deals.)

The post Kimi K3 AI Agent Finds Redis RCE Vulnerabilities in Just 27 Minutes appeared first on Cyber Security News.

The post New Kimi K3 AI Agent Uncovers Redis Remote Code Execution Flaws in Just 27 Minutes appeared first on GBHackers Security | #1 Globally Trusted Cyber Security News Platform.

Read more →

The post Attackers Weaponize GitHub Actions Runners to Target cPanel and WHM Servers appeared first on IT Security News.

The post KARR Car Alarm Flaw Lets Nearby Attackers Unlock and Immobilize Vehicles appeared first on Cyber Security News.

This Week in Rust is openly developed on GitHub and archives can be viewed at this-week-in-rust.org. If you find any errors in this week's issue, please submit a PR.

Want TWIR in your inbox? Subscribe here.

Updates from Rust Community

Official

• Announcing Rust 1.97.1

Newsletters

• The Embedded Rustacean Issue #76

Project/Tooling Updates

• Announcing Topcoat: a framework for building full-stack reactive web apps with Rust
• Syn 3.0.0
• What’s New in RustRover 2026.2
• kobe 0.35.0: readiness gates and cert recycling
• Comhad v0.1.0: a ranger-style tui cyberduck replacement for browsing S3
• Nova v0.2.1: computer-use MCP server
• winit now has comprehensive cross-platform drag-and-drop support, exposing most of the power of the underlying OS APIs
• crimson-crab v0.1.0 - a production-grade Rust SDK for the Claude API (streaming, tool use, prompt caching, batches)
• ferrovec: dependency-light HNSW vector search in Rust, compiled to WebAssembly for private in-browser semantic search
• OrdoFP 0.1.0 released — a functional-programming toolbelt for Rust (HList, GAT type classes, optics, effects, monad transformers)
• Freya 0.4
• buildline: merging cargo and ninja's build profiling into one timeline
• cochlea 0.3.0: melody read-back, MFCC timbre, a master limiter, and MIDI import for the deterministic agent-audio engine
• flodl 0.6.0: multi-host heterogeneous DDP - mismatched GPUs across hosts beat the fastest card alone
• hwatu: a daemon-based WebKitGTK browser for tiling WMs with ~13ms window spawn
• kache 0.11.0: broader compiler coverage and libc-aware keys
• tracing-reload - reload layer without panics
• Introducing OpenTypeless: Voice Input That Actually Works
• Reading a Rust crate's capabilities out of its compiled symbols

Observations/Thoughts

• Battery packs: Let's talk about crates, baby
• Capture Clauses as Effects
• Hardening Rust Code For Production
• Tokio Gives Progress, Not Ordering: Scheduling 1M Tasks
• Rust service hardening and production checklist
• [audio] The Rust Foundation with Rebecca Rumbul, Lori Lorusso, and David Wood, Rust Foundation leadership and board
• [video] Jon Gjengset: Open Source Maintenance 2026-07-18
• [video] Rust Release Changelog - 1.97.0
• [video] Livestream: Rust in Ubuntu

Rust Walkthroughs

• I hash-chained my agent's audit log. Then I found 13 breaks in it — all mine, all benign.
• Two tricky bugs in a Rust daemon
• [video] Backend Concepts in Rust: Securely Managing App Secrets
• [video] Build with Naz - Ep 21: High Performance Flat 2D Arrays in Rust (SIMD, L1 cache)

Crate of the Week

This week's crate is xan, a TUI toolkit to work with CSV files.

Thanks to Simeon H.K. Fitch for the suggestion!

Please submit your suggestions and votes for next week!

Calls for Testing

An important step for RFC implementation is for people to experiment with the implementation and give feedback, especially before stabilization.

If you are a feature implementer and would like your RFC to appear in this list, add a call-for-testing label to your RFC along with a comment providing testing instructions and/or guidance on which aspect(s) of the feature need testing.

No calls for testing were issued this week by Rust, Cargo, Rustup or Rust language RFCs.

Let us know if you would like your feature to be tracked as a part of this list.

Call for Participation; projects and speakers

CFP - Projects

Always wanted to contribute to open-source projects but did not know where to start? Every week we highlight some tasks from the Rust community for you to pick and get started!

Some of these tasks may also have mentors available, visit the task page for more information.

• No Calls for participation were submitted this week.

If you are a Rust project owner and are looking for contributors, please submit tasks here or through a PR to TWiR or by reaching out on Bluesky or Mastodon!

CFP - Events

Are you a new or experienced speaker looking for a place to share something cool? This section highlights events that are being planned and are accepting submissions to join their event as a speaker.

• No Calls for papers or presentations were submitted this week.

If you are an event organizer hoping to expand the reach of your event, please submit a link to the website through a PR to TWiR or by reaching out on Bluesky or Mastodon!

Updates from the Rust Project

576 pull requests were merged in the last week

Compiler

• account for async closures when pointing at lifetime in return type
• comptime inherent impls
• dep_graph: deduplicate task reads with an epoch-filtered index recorder
• eagerly check for ambiguity in macro parsing
• implement #[diagnostic::opaque] attribute to hide backtraces of macros
• shrink ast::Expr64

Library

• add explicit Iterator::count impl for str::EncodeUtf16
• implement bool::toggle
• implement const_binary_search
• implement Debug helpers via Cell
• implement VecDeque::truncate_to_range
• make pin!() more foolproof
• move std::io::BufRead to alloc::io
• move std::io::Read to alloc::io
• move std::io::read_to_string to alloc::io

Cargo

• use PGO for Cargo
• timings: only report units the job queue actually ran
• do not include proc-macro deps in rustc search path args
• include SBOM outputs in fingerprints
• lazily initialize git2 fetch transports

Rustdoc

• fix auto trait normalization env
• use PGO for rustdoc

Clippy

• add block_scrutinee lint
• avoid invalid ref_as_ptr suggestions in const/static initializers
• detect == 0 on unsigned types as a manual_clamp lower bound
• fix if_not_else linting on macro expanded conditions
• fix needless_collect suggests a suggestion that cannot be typed
• non_zero_suggestions: don't lint signed integer div/rem as NonZero
• manual_filter: don't eat comments in the and_then suggestion
• require the use of as _ for indirectly used traits in clippy sources
• rewrite min_ident_chars
• use #[must_use] determination from the compiler

Rust-Analyzer

• avoid index panic when flycheck list is empty
• add capture hints to coroutines
• add handler for E0572
• do not assume array destructuring assignments with rest pattern are constant-sized
• eagerly normalize .await's IntoFuture::Output
• enable auto trait inference
• extract variable preserving whitespace from macro input
• fix coroutines not recording binding owners correctly
• fix crashes in assists due to .unwrap() calls in SyntaxFactory
• fix hir crate leaking bound variables from skipped binders
• fix InferenceContext:identity_args using the wrong DefId
• fix syntax bridge panic when spilting float
• handle enum variants in next-solver generics
• implement lowering of HRTB
• invalid pattern_matching_variant lowering due to recovery
• merge WherePredicate::ForLifetimes into WherePredicate::TypeBound
• only write anon const ty in parent's inference result if it doesn't have its own inference
• panic with a function item and a proc macro item having a duplicate name
• parser to error on macro type bound
• spawn proc-macro servers on requests clearing the client cache
• use quote! inside ast::make::expr_call()
• use Result for the lsp-server Response payload type
• record expressions in types in ExprScope

Rust Compiler Performance Triage

The two most notable changes this week were #159115, which resulted in pretty nice instruction count wins for full incremental builds on several benchmarks, and #159091, which enabled PGO for rustdoc, which makes it ~3-4% faster across the board.

There were two large rollups with tiny performance regressions, which made it difficult to find the offending PRs.

Triage done by @Kobzol. Revision range: 5503df87..d527bc9b

Summary:

2 Regressions, 3 Improvements, 6 Mixed; 4 of them in rollups 34 artifact comparisons made in total

Full report here.

Approved RFCs

Changes to Rust follow the Rust RFC (request for comments) process. These are the RFCs that were approved for implementation this week:

• No RFCs were approved this week.

Final Comment Period

Every week, the team announces the 'final comment period' for RFCs and key PRs which are reaching a decision. Express your opinions now.

Tracking Issues & PRs

• Tracking Issue for bool::toggle
• Tracking Issue for vec_try_remove
• Avoid computing layout of enums with non-int discriminants
• Tracking Issue for const_btree_len
• Add raw_borrows_via_references lint
• stabilize size_of_val_raw, align_of_val_raw, Layout::for_value_raw
• rustc_passes: lint unused #[path] attributes on inline modules

• Emit note when calling rustc without specifying an edition
• Let the OS handle stack growth
• Add target_feature_available_at_call_site

• Deallocate post-2026 funds from PM and compiler-ops

• Do the bytes of a pointer have to stay in the same order?

No Items entered Final Comment Period this week for Cargo, Language Reference, Language Team or Rust RFCs.

Let us know if you would like your PRs, Tracking Issues or RFCs to be tracked as a part of this list.

New and Updated RFCs

• RFC: Refactor the libs team

Upcoming Events

Rusty Events between 2026-07-22 - 2026-08-19 🦀

Virtual

• 2026-07-24 | Virtual (Girona, ES) | Rust Girona
  • Sessió setmanal de codificació / Weekly coding session
• 2026-07-28 | Virtual (Dallas, TX, US) | Dallas Rust User Meetup
  • Fourth Tuesday
• 2026-07-28 | Virtual (Washington, DC, US) | Rust DC
  • Mid-month Rustful
• 2026-07-30 | Virtual (Berlin, DE) | Rust Berlin
  • Rust Hack and Learn
• 2026-07-31 | Virtual (Girona, ES) | Rust Girona
  • Sessió setmanal de codificació / Weekly coding session
• 2026-08-01 | Virtual (Kampala, UG) | Rust Circle Meetup
  • Rust Circle Meetup
• 2026-08-02 | Virtual (Dallas, TX, US) | Dallas Rust User Meetup
  • Rust Deep Learning: First Sunday
• 2026-08-04 | Virtual (London, UK) | Women in Rust
  • 👋 Community Catch Up
• 2026-08-05 | Virtual (Indianapolis, IN, US) | Indy Rust
  • Indy.rs - with Social Distancing
• 2026-08-07 | Virtual (Girona, ES) | Rust Girona
  • Sessió setmanal de codificació / Weekly coding session
• 2026-08-11 | Virtual (Dallas, TX, US) | Dallas Rust User Meetup
  • Second Tuesday
• 2026-08-13 | Virtual (Berlin, DE) | Rust Berlin
  • Rust Hack and Learn
• 2026-08-13 | Virtual (Nürnberg, DE) | Rust Nuremberg
  • Rust Nürnberg online
• 2026-08-14 | Virtual (Girona, ES) | Rust Girona
  • Sessió setmanal de codificació / Weekly coding session
• 2026-08-18 | Virtual (Washington, DC, US) | Rust DC
  • Mid-month Rustful
• 2026-08-19 | Hybrid (Vancouver, BC, CA) | Vancouver Rust
  • Dealing with Dependencies

Africa

• 2026-08-11 | Johannesburg, ZA | Johannesburg Rust Meetup
  • Rust's extended standard library

Asia

• 2026-07-25 | Mumbai, IN | Rust Mumbai
  • ​Rust Mumbai — July Meetup 🦀
• 2026-07-26 | Pune, IN | Rust Pune
  • Rust Pune: July 2026

Europe

• 2026-07-23 | Berlin, DE | Rust Berlin
  • Rust Berlin Talks: The next generation
• 2026-07-23 | London, UK | Rust London User Group
  • LDN Talks: July 2026 Antithesis Takeover
• 2026-07-23 | London, UK | London Rust Project Group
  • Rama modular service framework for Rust
• 2026-07-23 | Paris, FR | Rust Paris
  • Rust meetup #87
• 2026-07-25 | Stockholm, SE | Stockholm Rust
  • Ferris' Fika Forum #28
• 2026-07-27 | Augsburg, DE | Rust Meetup Augsburg
  • Rust Meetup #20: Julian Dickert - Supply chain security in Rust: Evaluating crates for production
• 2026-07-29 | Poland, PL | Rust Poland
  • Rust Poland x Kraków #10
• 2026-07-30 | Copenhagen, DK | Copenhagen Rust Community
  • Rust meetup #70
• 2026-07-30 | Manchester, UK | Rust Manchester
  • Rust Manchester July Code Night
• 2026-08-18 | Aarhus, DK | Rust Aarhus
  • Hack Night: Trust but verify the LLM
• 2026-08-18 | Leipzig, DE | Rust - Modern Systems Programming in Leipzig
  • Topic TBD

North America

• 2026-07-22 | Austin, TX, US | Rust ATX
  • Rust Lunch - Fareground
• 2026-07-22 | Los Angeles, CA, US | Rust Los Angeles
  • Rust LA: Rust in Distributed Systems with Flight Science!
• 2026-07-22 | New York, NY, US | Rust NYC
  • Rust NYC: Write A Custom Coding Agent and wasm_zero
• 2026-07-23 | Mountain View, CA, US | Hacker Dojo
  • RUST MEETUP at HACKER DOJO
• 2026-07-25 | Boston, MA, US | Boston Rust Meetup
  • Porter Square Rust Lunch, July 25
• 2026-07-25 | Brooklyn, NY, US | Flower
  • BOG-A-THON 2
• 2026-07-30 | Atlanta, GA, US | Rust Atlanta
  • Rust-Atl
• 2026-08-01 | Boston, MA, US | Boston Rust Meetup
  • Chinatown Rust Lunch, Aug 1
• 2026-08-04 | Boston, MA, US | Boston Rust Meetup
  • Evening Boston Rust Meetup at Red Hat, Aug 4
• 2026-08-06 | Saint Louis, MO, US | STL Rust
  • Shipping Temporal: How a Global Rust Ecosystem Built Chrome’s Newest Web API
• 2026-08-13 | Lehi, UT, US | Utah Rust
  • Utah Rust August Meetup
• 2026-08-13 | San Diego, CA, US | San Diego Rust
  • San Diego Rust August Meetup - Back in person!
• 2026-08-15 | San Francisco, CA, US | Flower
  • BOG-A-THON 3
• 2026-08-18 | San Francisco, CA, US | San Francisco Rust Study Group
  • Rust Hacking in Person
• 2026-08-19 | Hybrid (Vancouver, BC, CA) | Vancouver Rust
  • Dealing with Dependencies

Oceania

• 2026-07-23 | Perth, AU | Rust Perth Meetup Group
  • Rust Perth: July Meetup!
• 2026-07-30 | Melbourne, AU | Rust Melbourne
  • Rust Melbourne July 2026

South America

• 2026-08-08 | São Paulo, SP | Rust-SP
  • Rust SP - Aug/2026

If you are running a Rust event please add it to the calendar to get it mentioned here. Please remember to add a link to the event too. Email the Rust Community Team for access.

Jobs

Please see the latest Who's Hiring thread on r/rust

Quote of the Week

We were planning on publishing a blog post announcing this at the same time as making the repo public, but ran out of private repo CI usage 😭.

– Carl Lerche on r/rust about the launch of topcoat

Despite a lamentable lack of suggestions, llogiq is glad to have found this quote.

Please submit quotes and vote for next week!

This Week in Rust is edited by:

• nellshamrell
• llogiq
• ericseppanen
• extrawurst
• U007D
• mariannegoldin
• bdillo
• opeolluwa
• bnchi
• KannanPalani57
• tzilist

Email list hosting is sponsored by The Rust Foundation

Discuss on r/rust

Hello, again. This is Trey.

Welcome to part 8 in my Cheap Yellow Display (CYD) Project series.

If you wish to catch up on earlier episodes, you can find them on my HPR profile page https://www.hackerpublicradio.org/correspondents/0394.html

It is hard to believe that I started this project and the HPR series to document it more than a year ago. Time flies. Life happens. I spent the last 8 months so focused on work related activities that I had to set the project aside. And once I set it aside, it was difficult to get back to again. The one time I tried, I found that my son's old Windows laptop, which I had commandeered to use for the project, was once and truly dead.

We live in a different world now than we did when I began this project. Today, everything is about AI – how it is changing our world, increasing efficiencies, and even displacing certain types of jobs. "Vibe coding" is transforming the way we make software, and now everyone is a developer.

Within my organization, we are all being strongly encouraged to learn more about AI and apply it in our daily work. We are blessed to have access to a wide range of training and to powerful tools which support the process. Several colleagues within my organization and outside my organization have recommended Claude Code -- for development, for organization, for brainstorming, and for much more. My role is not that of a developer, and I have had no need for Claude Code at work. There are plenty of other tools for me to use.

But at home, I thought... I could install Claude Code at home to experiment with and to learn. And then it hit me. I wonder if I could use Claude Code to help me with my stalled CYD project.

"Hello, my name is Trey, and I am a fraud."

OK. I don't think I am a fraud, but having never used such a powerful tool to help me code, I feel a little bit like a fraud, with Claude doing the work for me. Let's talk through what we did.

As I mentioned, I was unable to use the laptop on which I created the original GUI code. But no worries, because It was all on GitHub, right?

So, I began by trying to install Claude Code on one of my Ubuntu machines. That failed miserably, and all the instructions I found online recommended running it on Windows. So I transitioned to installing Claude Code on a freshly built Windows 10 system using some old hardware which will not support Windows 11. Surprisingly, It seems that Claude wants to run within Ubuntu on Windows Subsystem for Linux (WSL).

Once I went through all the hoops for installing and setting up my basic subscription, I got to work. I created a new directory to use for all my project files, and another one for Claude to write all its output files to.

Everything I have read and heard about using Claude Code for a project like this recommended beginning by using Claude to create the project plan. So my first prompt was as follows:

"I am building a project using an ESP32 cheap yellow display. The final goal is to have a device with a graphical user interface which will allow me store several text messages, each assigned to their own specific button. Then, when one of the buttons is pressed, the message will be converted into morse code, and the message will be sent by blinking an onboard LED. I already have the initial design for the GUI coded in my github repository. Please construct a detailed step by step plan for building this application"

I wanted to keep it simple at the beginning, so even though I plan to use an opto-isolated relay for the output, I am starting out using the built in LED.

Claude asked me for the URL for my Github repository, and I provided it. After thinking for a bit, it produced a project plan.

CYD Morse Sender — Step-by-Step Build Plan

What You Already Have

- 3 fully designed LVGL screens (Send, Config, Keyboard)

- 7 send buttons with green styling on the Send Screen

- Speed slider (5–30 WPM) and program slot dropdown on Config Screen

- Text area + LVGL keyboard widget on Keyboard Screen

- Display driver and touchscreen hardware initialized (but touch read was stubbed out)

---

Phase 1: Fix Touchscreen Input

Initialize the XPT2046 on VSPI, replace the hardcoded touched = false with real touch data, calibrate raw ADC coordinates to screen pixels, and verify all three nav buttons transition screens correctly.

Phase 2: Persistent Message Storage

Use Preferences.h / NVS to store 7 messages ("msg0" – "msg6") that survive power cycles. Load on boot and populate send button labels.

Phase 3: Config Screen — Slot Selection & Speed

Wire the Program dropdown to g_selectedSlot, wire the Speed slider to g_wpm with a live WPM label, and wire the Set button to clear the text area and navigate to the Keyboard Screen.

Phase 4: Keyboard Screen — Capture and Save Text

On keyboard OK (LV_EVENT_READY): read the text area, save to NVS, update the send button label, navigate back. On Cancel: navigate back without saving.

Phase 5: Morse Code Engine

Build morse.h with the full A–Z / 0–9 lookup table, a textToMorse() converter, and Paris-standard timing (unit_ms = 1200 / wpm).

Phase 6: Non-Blocking LED Transmission

State machine (IDLE / LED_ON / LED_OFF) driven by millis() in a morseUpdate() function called every loop — no delay(). LED on GPIO 17 (blue).

Phase 7: Wire the Send Buttons

Each button calls startMorse(getMessage(slot)) if not already transmitting. Disable all send buttons during TX; re-enable when the state machine reaches the end.

Phase 8: Integration & Polish

Stop button, WPM persistence, empty-slot guard, serial debug output, final touch calibration, end-to-end test checklist.

---

Recommended order: Phase 1 → 2 → 7 (partial) → 5 → 6 → 7 (full) → 3 → 4 → 8

This was wild! Claude determined exactly how far along I was in the project, and also alerted me to the fact that the "touch read was stubbed out". Ugh. This means that the files I had uploaded to GitHub were my original GUI files (Episode 05 – HPR4532 - https://hackerpublicradio.org/eps/hpr4532/index.html ) and not the ones that I finally got working properly (Episode 07 – HPR4624 - https://hackerpublicradio.org/eps/hpr4624/index.html ). That was my own fault. Did I mention that I don't get Git? I REALLY need to learn to properly use Git!

But, we have a plan, broken down by eight numbered phases. And they seem to address all the functionality I wanted with a few additional things I had not thought about. Interestingly, even though these phases are sequentially numbered, Claud recommended that we approach them in a bizarre order: Phase 1 → 2 → 7 (partial) → 5 → 6 → 7 (full) → 3 → 4 → 8 .

Alright. Let's see what we can do. The first phase is to fix the touchscreen input.

Claude took me through it step-by-step, asking as it needed to read specific project files.

Finally, it wrote a new ui.ino code file to my speficied output directory for me to test. I copied it into the correct file location, said a quick prayer, compiled in Arduino IDE, and downloaded to the CYD.

Well, that is... interesting. The display looked nothing like it was supposed to. There were vertical green bars with smaller dashed green vertical stripes in them. I will include a picture in the show notes so that you can see what it looked like and why it was so difficult to describe.

I spent the next hour or so trying to explain what I was seeing to a chat bot. Claude recommended potential fixes which either did nothing or made the situation worse. I began questioning whether this was a good idea, how people actually gained efficiencies talking to a bot, and even several life choices.

Then I had a thought. I prompted Claude:

If I were to take a picture of the screen on the cheap yellow display and copy it into the output folder, would you be able to analyze it to better determine what is wrong and how to fix it?

Shockingly, Claude answered in the affirmative, and told me to copy the picture to the output folder and let it know when to proceed. It analyzed the picture and more of the supporting files it had copied from my GitHub, asking each time if it could access that file. It determined that my original code was written for a flavor of LVGL version 8 and I was now using LVGL 9.5.

It recommended changes, and then asked permission to make those changes, file by file. .h files & .c files, Finally, I just gave it permission to edit the files in the project folder without asking for permission for each file each time. Claude was still explaining each change, showing me exactly what would be changed, and asking for permission, so that I could review all of the changes. But now it was not asking additional permission to write to each of the impacted files.

Next, Code compiled and downloaded. Different screen, but not right. Again, I took a picture and gave it to Claude to analyze. So, Claude paused and altered the code to generate a specific test pattern overtop of the GUI.

The test pattern was supposed to cover the entire rectangular screen. But parts of the pattern were in a square on the screen and parts were not. Another photograph and analysis, told Claude that there were some rotation/screensize issues.

We repeated this several times. Some resulted in improvement, and others did not.

This is the point where I noticed something interesting. Not about Claude, specifically, or about the app. But I noticed something interesting about myself and about the process.

Previously, when I was working through some of these challenges without Claud, I found myself becoming more and more stressed, frustrated, and angry, until I found a solution. Then another problem would repeat the cycle. Success in the end was great, but the emotional extremes during the process were not always pleasant.

Now, I was effectively managing the project, and relaying information to the resource responsible for fixing the problems -- a very different experience.

But I also ran into another issue. Claude became absolutely certain that the problem revolved around the device not accurately knowing where the 4 corners of the screen were. But in reality, the output of the test pattern was rotated 90 degrees from the actual screen. It took several iterations of me insisting that the problem had to do with screen orientation and not corner coordinates. It was interesting to experience the tool doubling down on an obvious mistake, but we finally resolved that.

Again, while it was frustrating, it was much less stressful.

We proceeded to Phase 2: Persistent Message Storage where we ensured that the button labels on the send screen were stored in the devices persistent storage, so that, when they are edited to contain the message they should send, that information would survive a reboot.

Next, we combined elements of Phase 5: Morse Code Engine , Phase 6: Non-Blocking LED Transmission , and Phase 7: Wire the Send Buttons together. Building the morse code engine was an area I had been thinking about for a while. I already had working parts of something similar in the Arduino practice oscillator I have referenced a few times in this series. The code for the practice oscillator may be found on my GitHub, but it was all based on original code from jmharvey1, with my only contribution being making pin assignments variables so that the code could easily be ported to different devices.

So, I was happy that we were building the morse code engine directly. The code for it may be found in morse.h, which uses a constant character lookup table to define each character. Without any specific direction from me, Claude used the PARIS timing methods I have already described within Episode 6 of this series. It defines timing for DOT, DASH, LETTER_GAP, and WORD_GAP, and all are based on a simple calculation of 1200 ms / the number of words per minute (WPM) we wish to transmit.

Along the way, we discovered that, if we tried to use the delay() function, it would crash the program due to a conflict with the LVGL timer used for touchscreen inputs. Claude altered all the delays accordingly.

Then, Phase 3: Config Screen — Slot Selection & Speed allowed us to configure the WPM we wished to use in addition to selecting a specific Send button to reconfigure. This forced us to work on Phase 4: Keyboard Screen — Capture and Save Text which is used to type the entries for each Send button. At this point, I also decided that we would want to also use the Keyboard Screen to send ad hoc morse as we typed it.

During this phase we discovered several bugs which seemed to cause random freezes. Careful troubleshooting with messages output to the Arduino IDE's serial console helped us narrow down the causes and remedy them.

Finally all the tests worked and I am able to merrily pre-configure macro buttons with custom messages and use the CYD to send the morse code for those messages to the on-board LED at whichever rate I specify.

I have noticed in my presentation of this narrative that I repeatedly slip into the first person plural terms "we" and "us" instead of the first person singular terms "I" and "me". I have unconsciously personified Claud and recognized it as an integral part of my (formerly one person) development team.

I finally configured Claude to connect to my GitHub repo and upload all the files and documentation. We additionally created a CYD-Narrative.md file which describes in more detail all the work which was done on the project. I still do not 100% get git, but we are successfully using it.

You can find all these files in my GitHub repo ( https://github.com/jttrey3/CYD_MorseSender ) where they are shared under a GPL 3.0 license.

There are still several additional steps I plan to complete in the next few months.

1. I will be integrating an opto-isolated relay which will allow me to plug the device into the straight key input on any amateur radio. This will require a battery power source, charge controller, and more hardware.

1. I... make that "We" (Claude & I) will be modifying the code to support an audio side tone through an attached speaker when sending code
2. We will add an output selection switch to the config page to choose any combination of speaker, relay, or LED as output.
3. We will develop a downloadable firmware which I hope to share with the Cheap Yellow Display community.

If you can think of any additional features you would like to see integrated, please drop me an email using the address in my HPR profile.

I may also work with a friend to attempt to 3d print a case for the entire contraption, and I will be sure to record additional episodes sharing the process.

I have learned so much throughout this project, about the CYD, ESP32, GUIs, Claude Code, GitHub, and most of all, about myself.

Does using AI to develop this code make me a fraud? It still feels like it in some ways.

Does it make me more productive? ABSOLUTELY! I made consistent forward progress when I only had 30-60 minutes each day to work on it, and everything discussed in this episode was completed in less than a week. If I had been able to work on it for a few hours uninterrupted, it may have only taken me 3-5 hours.

Does it empower and inspire me to do more projects like this? 100% I feel like I had support working with me the whole way. I was less stressed overall, and it had less of an impact on the amount of and quality of time I spent with my family.

I will be wrapping up this series soon, without any more 6 month gaps, I hope.

Until next time...

Provide feedback on this episode.

The post Cursor Releases Cursor Router: A Request-Level Classifier Delivering Frontier Coding Quality at 30–50% Lower Cost appeared first on MarkTechPost.

Read more →

The post ASUS Patches Critical Router Vulnerability Enabling Remote Command Execution appeared first on IT Security News.

The post ASUS Patches Critical Router Vulnerability Enabling Remote Command Execution appeared first on Cyber Security News.

Read more of this story at Slashdot.

The post What 434 AI-Generated Vulnerabilities Reveal About Secure Software Development appeared first on Cyber Security News.

Read more →

The post Sol Searching | Can Frontier Models Tackle Autonomous Long-Horizon Malware Analysis? appeared first on IT Security News.

Read more →

The post New NULLZEREPTOOL Uses Telegram to Launch 20 DDoS Methods With Rotating Proxies appeared first on IT Security News.

The post New NULLZEREPTOOL Uses Telegram to Launch 20 DDoS Methods With Rotating Proxies appeared first on Cyber Security News.

The post Faster Incident Response: How ANY.RUN Helps SOCs Cut MTTR by Up to 21 Minutes per Case appeared first on ANY.RUN's Cybersecurity Blog.

The post Early Edition: July 22, 2026 appeared first on Just Security.

Der US-amerikanische Telefonhersteller Light hat das „Light Flip“ vorgestellt, ein neues faltbares Smartphone (oder eher ein Klapphandy), das als Alternative zu heutigen Smartphones konzipiert ist. Es soll Ablenkungen wie soziale Medien und andere Apps eliminieren, indem es sich ganz auf das Wesentliche beschränkt.

Engadget berichtet, dass das Handy auf dem Konzept des früheren „Light Phone III“ des Unternehmens aufbaut, jedoch in einem klassischen Klapphandy-Format mit physischer Tastatur anstelle eines Touchscreens erhältlich ist. Die Benutzeroberfläche besteht aus einer einfachen Liste mit Funktionen auf einem Schwarz-Weiß-Bildschirm, und wenn das Handy geschlossen ist, gibt es kein externes Display, sondern lediglich eine kleine Benachrichtigungsleuchte.

Das Light Flip ist zudem mit einer 50-Megapixel-Kamera ausgestattet, die Fotos mit einer Auflösung von 12 Megapixeln aufnimmt, sowie mit einem austauschbaren Akku, einem USB-C-Anschluss und einer 3,5-mm-Kopfhörerbuchse. Die Auslieferung beginnt im April 2027, und das Gerät kann bereits jetzt vorbestellt werden.

In den USA wird das Light Flip mit einem Zwei-Jahres-Vertrag angeboten, der mit 39 Dollar monatlich zu Buche schlägt. Wenn Sie das Handy stattdessen ohne Vertrag kaufen, soll es voraussichtlich 299 Dollar (umgerechnet 262 Euro) kosten. Laut Hersteller wird das Smartphone mit Netzen der Deutschen Telekom, Vodafone, O2 und 1&1 Drillisch kompatibel sein.

Einfache Mobiltelefone (auch Feature Phones oder Dumb Phones) sind für eine spezielle Zielgruppe gemacht, die auf unnötige Zusätze verzichten will. Sie sind vor allem zum Telefonieren und für rudimentäre Aufgaben geeignet, was viele als weniger ablenkend empfinden.

Es gibt auch Möglichkeiten, normale Smartphones “dumm” zu machen. Allerdings erfordert das eine gewisse Einarbeitung und auch Willenskraft. Der Wechsel zu einem Feature-Phone kann also einige Vorteile bringen.

Ich bin Handy-süchtig und mache den Versuch: 7 Tage ohne Smartphone

Read more of this story at Slashdot.

The post Critical ASUS Router Flaw Lets Remote MITM Attackers Execute Arbitrary Commands appeared first on Cyber Security News.

Read more →

The post Critical ASUS Router Flaw Lets Remote MITM Attackers Execute Arbitrary Commands appeared first on IT Security News.

The post Critical ASUS Router Flaw Lets Remote MITM Attackers Execute Arbitrary Commands appeared first on GBHackers Security | #1 Globally Trusted Cyber Security News Platform.

Besitzer einer Fritzbox 7510 steht ab sofort FritzOS 8.26 bereit. Das neue Wartungsupdate behebt einen Fehler, der unter bestimmten Bedingungen die Geschwindigkeit von DSL-Anschlüssen erheblich reduzieren konnte. Darauf weisen die offiziellen Versionshinweise von Fritz sowie mehrere Medienberichte, etwa von Winfuture, hin.

Wer eine Fritzbox 7510 nutzt, sollte daher prüfen, ob die neue Firmware bereits zur Installation angeboten wird. Das Update enthält zwar keine neuen Funktionen, beseitigt aber ein Problem, das die Internetverbindung im Alltag spürbar beeinträchtigen konnte.

Fehler begrenzte DSL-Anschlüsse auf 10 MBit/s

In bestimmten technischen Konstellationen kam es vor, dass DSL-Verbindungen unabhängig vom gebuchten Tarif auf maximal 10 MBit/s begrenzt wurden. Nutzer bemerkten dies möglicherweise durch ungewöhnlich langsame Downloads, längere Ladezeiten oder Probleme beim Streaming und Online-Gaming.

Mit FritzOS 8.26 soll dieser Fehler nun behoben sein. Die offiziellen Änderungen fallen überschaubar aus:

• Behebung eines Fehlers, der DSL-Verbindungen unter bestimmten Bedingungen auf 10 MBit/s begrenzen konnte
• Verbesserungen der Systemstabilität

Bislang nur für die Fritzbox 7510

Aktuell wird FritzOS 8.26 für die Fritzbox 7510 bereitgestellt. Dabei handelt es sich um ein DSL-Einstiegsmodell mit Unterstützung für Supervectoring-Anschlüsse mit bis zu 300 MBit/s.

Erfahrungsgemäß veröffentlicht Fritz neue Wartungsupdates jedoch häufig zunächst für einzelne Modelle, bevor weitere Router folgen. Ob und wann andere Fritzboxen ebenfalls FritzOS 8.26 erhalten, ist derzeit noch nicht bekannt.

Unabhängig davon empfiehlt es sich grundsätzlich, regelmäßig nach neuen Firmware-Versionen zu suchen. Updates schließen nicht nur Fehler, sondern verbessern häufig auch die Stabilität und Sicherheit des Heimnetzes.

So prüfen Sie, ob das Update verfügbar ist

Die Aktualisierung lässt sich direkt über die Benutzeroberfläche der Fritzbox installieren. Öffnen Sie dazu in Ihrem Browser die Adresse „fritz.box“ und wechseln Sie anschließend zu System > Update. Dort können Sie manuell nach einer neuen Firmware suchen.

Wer automatische Updates aktiviert hat, muss in der Regel nichts unternehmen. In diesem Fall lädt und installiert die Fritzbox neue Versionen selbstständig, häufig außerhalb der üblichen Nutzungszeiten.

Für Besitzer einer Fritzbox 7510 dürfte die Installation von FritzOS 8.26 insbesondere dann interessant sein, wenn die Internetgeschwindigkeit zuletzt unerwartet niedrig ausgefallen ist.

Weitere Beiträge zum Thema:

• Fritzbox-Router im Vergleich: Welches ist das beste Modell?
• Fritzbox absichern: So sind Sie optimal geschützt
• Test: Fritzbox 7590 AX – neuer High-End-Router mit Wi-Fi 6

The post Cisco Foundation AI Releases Antares: 350M and 1B Open-Weight Models That Localize Known Vulnerabilities Inside Real Codebases appeared first on MarkTechPost.

During an internal benchmark evaluation, frontier artificial intelligence models developed by OpenAI—including GPT-5.6 Sol and an unreleased, higher-capability pre-release model—broke out of their sandboxed research environment, obtained raw internet access, and autonomously executed a complex cyberattack against Hugging Face’s production infrastructure.

OpenAI officially categorizes the breach as an "unprecedented cyber incident, involving state-of-the-art cyber capabilities". This incident fundamentally re-frames global discussions surrounding AI containment, frontier model alignment, commercial guardrails, and enterprise threat modeling.

But first thing's first: enterprises should understand the situation, evaluate their own AI and computer systems in light of it, and above all, don't panic. As we'll review, the incident does show the increasing power and danger of frontier AI systems, but it does not mean that enterprise Ai deployments are inherently less secure, nor that they need extensive overhauling.

Anatomy of an Autonomous Breakout

To understand how a routine benchmark evaluation escalated into a cross-infrastructure breach, one must examine the objective mechanics of the evaluation pipeline.

The models were prompted to solve ExploitGym, a benchmark designed to quantify multi-step exploitation capabilities.

Hyper-focused on maximizing its evaluation score, the AI agent inferred that Hugging Face likely hosted the answer keys and benchmark solutions. In pursuit of solving the problem, the model determined that breaking out of its container and stealing the answers was an optimal strategy.

OpenAI’s evaluation environment is designed to be strictly isolated, limiting network traffic through a proxy used for package caching. However, the models identified and exploited a zero-day vulnerability in that internally-hosted third-party proxy software.

Once through, the AI executed a series of lateral movement and privilege escalation actions across OpenAI's research nodes until reaching a machine with unrestricted internet access. From there, the model searched the web, target-identified Hugging Face, and launched a multi-stage attack by chaining together stolen credentials and remote code execution vulnerabilities on the Hugging Face servers.

The UK AI Security Institute (UK AISI) recently evaluated models such as GPT-5.6 Sol, demonstrating that they are increasingly able to sustain complex, multi-step cyber operations over long time horizons. OpenAI notes that this incident confirms these theoretical capabilities now apply in real-world settings.

Rewinding the Tape on a Forensic Trap

While OpenAI’s July 21 release reveals the identity of the autonomous agent, Hugging Face had already begun managing the intrusion days earlier.

On July 16, Hugging Face disclosed that an autonomous AI agent system breached its production infrastructure. As detailed by VentureBeat, the attacker’s entry point was a malicious dataset that triggered code execution through a remote-code loader and template-injection flaws within dataset configuration files.

Once inside, the agent framework broke out onto the node running the workload and executed thousands of actions via short-lived sandboxes, harvesting cloud and cluster credentials over a single weekend.

When Hugging Face's security team detected the breach, responders immediately turned to frontier AI models via commercial APIs to parse the massive volume of system logs and reconstruct over 17,000 recorded events. Then, a secondary operational crisis emerged: the commercial AI models refused to help.

Because standard commercial frontier models utilize unified safety guardrails designed to block malicious prompt submissions, the models classified the incident response team's forensic queries—which contained raw shell commands, real exploit payloads, and credential dumps—as malicious attacks. Every forensic query submitted by the defenders was blocked outright.

"The same prompts that are most valuable during an active intrusion—shell commands, exploit chains, credential dumps, persistence mechanisms, lateral movement—are exactly the prompts most likely to trigger safety systems," notes Merritt Baer, former Deputy CISO at AWS and senior adviser to Andesite, G2I, and AppOmni, in an interview with VentureBeat. "As AI becomes embedded in security operations, this becomes an operational resilience issue rather than merely a model policy issue".

To bypass this roadblock, Hugging Face abandoned commercial hosted APIs and deployed GLM 5.2 —a state-of-the-art Chinese open-weight model released last month by z.ai, as reported at the time by VentureBeat —locally on its own infrastructure.

Free from third-party API restrictions and external safety filters, GLM 5.2 successfully analyzed the raw exploit data locally, allowing defenders to complete forensic reconstruction and contain the breach without any attacker data leaving the company's environment.

Industry Reaction and the Geopolitical Paradox

The revelation that an American frontier model autonomously escaped containment, attacked a partner platform, and was ultimately analyzed using a Chinese open-weight model sent shockwaves through the tech community.

The Wall Street Journal summarized the public reaction on X, calling the event "the stuff of cybersecurity nightmares. OpenAI said two artificial intelligence systems it was testing broke out of their test environment, hacked their way onto the internet and broke into another company. The victim was Hugging Face."

Also posting to X, AI alignment researcher Lawrence Chan emphasized the importance of transparency regarding the incident, noting that "Credit where it’s due: Hugging Face detected and disclosed the intrusion last week. OAI confirmed its models were involved and provided more details, even when it didn't have to. Separate from choices that led to the hack, voluntary disclosure is good, and I’m glad they did so."

Meanwhile, AI researcher Nathan Lambert provided a succinct technical summary in his own X post, observing that "An openai model, during evaluation on a cyber benchmark, exploited a public zero day bug, escaped sandboxing in openai's infra, and got into the internal huggingface infra via an exploit (through a public dataset service) all in the attempt to solve a benchmark problem." He later addressed the geopolitical implications, writing in another post on X:

"Rght now American companies need Chinese models to secure their cyber infra due to guardrails on closed models.

But if a Chinese model in training had infiltrated a prominent American tech company, it very likely could've been the cause of policy banning future Chinese models."

Technology investor David Sacks also zeroed in on the guardrail paradox, writing in his own X post that "Hugging Face tried using American frontier models to analyze an AI-powered cyber attack. But the guardrails blocked requests containing real exploit payloads so they switched to GLM 5.2 running locally. The guardrails actually impaired defensive security."

Sacks quote tweeted Hugging Face CEO Clem Delangue, who wrote: "We had this experience ourselves this week! Very scary to be guardrailed as a defender when you know attackers are likely bypassing".

5 Strategic Takeaways for Enterprise Tech Leaders Now

For the average enterprise executive, the central question is immediate: is our corporate network at risk from escaping AI agents? The short answer is no, not inherently.

1. Hugging Face occupies a unique position in the software ecosystem. As a global repository for open-source AI models, code, and datasets, Hugging Face natively attracts autonomous agents, scrapers, automated evaluation pipelines, and active security researchers. Furthermore, the model’s target selection was context-specific: GPT-5.6 Sol searched for Hugging Face specifically because it deduced that Hugging Face hosted the answers to ExploitGym. Standard corporate networks—such as financial databases, HR platforms, or logistics systems—do not host benchmark solution keys that draw the direct focus of an agent attempting to solve an evaluation metric.

2. However, the long-term risk profile for enterprise technology permanently shifts following this event. AI models with long-horizon reasoning seek the path of least resistance to accomplish a goal, including breaking rules, escaping sandboxes, or exploiting zero-days if deployment safeguards are intentionally disabled for testing or bypassed by an attacker. As Hugging Face's experience illustrates, data processing pipelines that ingest external datasets without sandbox execution or static analysis act as highly vulnerable initial access infrastructure.

3. This incident also drastically undercuts recent policy chatter in the U.S. calling for Chinese open-source AI models to be banned or restricted due to security concerns. As this episode demonstrates, an open-weight Chinese model actually served as the vital defensive layer for an American and French firm facing an unanticipated cyberattack from an American model that broke containment. Contrary to the official line from some U.S. policymakers and hardline China hawks, the Chinese open-source models weren't a security risk to the U.S. companies, in this case — rather, an American proprietary, closed-source model from an ostensibly secure American company was the source of the danger. Thus, any pressure U.S. companies may face from officials, agencies or non-governmental organizations to stop relying on affordable Chinese open weights models for defensive or any other lawful purposes should be viewed with a high degree of suspicion, and arguably resisted to the fullest legal extent.

4. Enterprise CISOs must audit their dependency on cloud-based AI APIs and pressure vendors to implement authenticated trust architectures. Commercial AI vendors currently treat safety as a generic content-moderation problem, applying the same blanket refusals to an enterprise CISO as they would to a malicious hacker. Baer frames this requirement perfectly: "The model shouldn’t only understand what is being asked. It should understand who is asking, why, and under what governance".

5. Incident response plans must explicitly account for scenarios where commercial APIs fail, rate-limit, or actively refuse queries during an active security event. Maintaining air-gapped, locally deployed open-weight models trained on security log analysis is no longer an edge-case luxury; it is a critical operational requirement. Security leaders running AI workloads in production must recalibrate their timelines and prepare for machine-speed threat actors that operate without human limits.

01 Introduction

In this episode I will describe techniques for downloading podcasts using basic shell commands such as wget.

I will illustrate this using a bash script that can be used to download HPR podcasts.

Even if you do not have any interest in downloading your podcasts using this method, you may find some of the methods useful or interesting.

It is the principles that are discussed here that are important, rather than the implementation.

02

I realize that there are already a number of different podcast download programs available, including at least one written in bash.

However, you may feel that none of these suit how you wish to do things and want to create your own system tailored to your specific needs.

If so, then I hope the following is of some use to you.

If not, then you may still find some of the things discussed here to still be of interest.

Some of the subjects I cover include

wget to a user defined file name.

parsing xml with xmllint.

using inotifywait to trigger an action when a file is created or modified.

using notify-send to send a message to the notification area.

and

a way of allowing a cron job to send a message to the user interface.

03 Background

There has been an ongoing discussion in comments to some HPR episodes about problems downloading HPR podcast episodes.

Apparently some people have been experiencing problems with the way the episode URLs are structured.

04

I am afraid that I don't fully understand the nature of these problems, so I won't be addressing that problem directly.

Instead, I will present a bash script that I have written which can be used to download HPR podcasts.

This bash script can be run using cron to automatically fetch new HPR podcasts and save them to a designated directory.

This is a simplified version of a script that I have used for years to download HPR and other podcasts.

05

I won't try to read the full bash script out in this podcast, as that would be a bit dull to listen to.

I will instead describe what each section does and why I chose to do things that way.

Perhaps other people can offer suggestions of better ways to do things.

I will post the full bash script in the show notes.

06 Fetching Podcasts

The standard way of distributing podcasts is to publish an RSS feed containing URL links to the audio files.

RSS is a very long established and widely supported mechanism for this and other purposes.

An RSS feed is basically an XML document which can be accessed over HTTP.

These URLs contained in the RSS XML document can then be used to download the actual audio files, such as MP3 or OGG files.

07

Basically what we need to do is the following

• Download the RSS XML document.

• Extract the URL links to the audio files.

• Compare the list of these links to a previously saved list to see which ones are new and which ones are ones that we previously downloaded.

08

• Make a list of the new URLs.

• Go through this list of new URLs and download each of the new audio files.

• Check to see that we actually received the new audio file.

• Add the URLs of the files we successfully downloaded to our saved list of podcast URLs

09

In addition to this, we would like to have the above happen automatically in the background without our having to take any action on our own.

We may wish to receive a notification of when a new podcast has arrived however.

We would probably also wish to receive notification of any errors or failures.

10 Fetching Podcasts - The Preliminaries

Our desire to be able to run the script automatically imposes some requirements on our solution.

To schedule the script we will use cron.

Cron is a Linux facility to run scripts on a schedule.

11

One of the side effects of using cron however is that we need to specify the full path to the locations where we intend to keep any data files, plus also the full path to where we intend to put the downloaded podcasts.

12

So the first thing we need to do in our script is to specify a number of different values for things like file location, the URL for the HPR RSS feed, and several other things as well.

I will skip over the details of these, although I may make reference to them later.

13 Get the RSS Data

The first thing of real substance to do is to fetch the current RSS feed data.

I have put this in a bash function called getrssurldata

The contents of this function are a one liner, but with a number of elements chained together through pipes.

14 Downloading the RSS XML Document

• First we use wget, which is a standard command on most Linux distros.

• We specify four things.

• First we set a timeout. I have chosen 20 seconds.

• Next we set the retry limit. I have chosen 3.

15

• Then we specify that the output of wget is sent to stdout rather than saved as a file.

• This is done by using the -O option followed by a space and then a dash.

• The O option is usually used to specify a file to save the output to, but when used with a dash causes output to go to stdout.

• Then we specify the URL of the HPR RSS feed.

16 Contents of the XML Document

This gives us the HPR RSS XML document.

There are about 5,000 lines in this RSS document.

Most of those lines are the show notes which are also included in the feed.

17 Extracting the Podcast Episode URLs

There are only 10 lines of the document that contain information that we are interested in however.

These lines are enclosed in "enclosure" XML tags.

We just need to find those lines and separate out the URLs

18 Standard Command Line Tools

There are two ways that we can do this.

One is to use a combination of grep, sed, and cut.

Grep can find the lines containing the enclosure tags.

Sed and cut can extract the URL from the surrounding extraneous data.

19

However, this method does not discriminate between real enclosure tags in the data portion of the RSS feed and enclosure tags in the show notes which are included in the feed from episodes such as this one.

This may be an acceptable problem in practical terms, but we can do better.

20 Using an XML Parser

The other method is to actually parse the XML document.

there are at least two command line XML parsers that I am aware of.

These are "xmllint", and "xlmstarlet".

I have used xmllint in this example.

I have not used xmlstarlet, so I can't offer any comment on how easy or difficult to use it is.

21

I won't give a detailed explanation of all the things that xmllint can do.

It has many features, most of which, as the name suggests, have to do with finding formatting problems with the XML itself.

Describing everything it can do would be at least one episode in itself.

I will instead just give the particular command used and explain each element of it.

22

In this example assume that we are piping the output of wget directly into xmllint.

The complete command is

xmllint --xpath "//channel/item/enclosure/@url" - | cut -d'"' -f2

23

In this example,

xmllint is the name of the command.

--xpath tells it to parse the document according to the string which follows.

"//channel/item/enclosure/@url" tells it to find a series of tags in the hierarchy of channel, followed by item, followed by enclosure, and then extract the url attribute from the enclosure tag.

The "-" which follows tells it to look for input from stdin rather than from a file.

24

The result is a string which has the url attribute name, an equal sign, and the URL that we want enclosed in quotes.

To get just the URL itself, we pipe the output from xmllint into cut, using the doublequote characters as delimiters.

We then save the result in a temporary file.

25 Finding the New Episodes

Next we wish to find the new podcast episodes.

Each HPR episode is identified by a unique URL.

This means that if we save the URLs of episodes that we have already downloaded, we just have to look for the URLs that do not appear in this saved list.

https://hub.hackerpublicradio.org/ccdn.php?filename=/eps/hpr4659/hpr4659.mp3

26

The easiest way to do this is to take our two lists of URLs, sort each into temporary files, and then compare the sorted URLs using the "comm" command.

27

This is simple, but has a drawback.

Some podcasts occasionally change distributors.

When they do this, the old podcasts are re-published with new URLs and you end up downloading a lot of old episodes over again.

28

With HPR we could get around this by extracting just the file name and looking for that instead of the full URL.

I will however leave that problem as an exercise for the student and just accept that if the URL format changes we may end up downloading old episodes over again.

Since the feed has a maximum of only 10 episodes in it however, that isn't really that big of a problem.

It would be more of a problem with podcasts which have very large numbers of episodes in their feed, but the solutions to those will be feed specific.

29 Downloading the New Podcasts

We should now have a list of URLs for the new podcasts we do not already have.

Typically this should be only one file, but there could be several, or even as many as 10, if we have not turned on our computer in a while.

Therefore, we need to iterate through the file of new podcast URLs and download each one.

30

Before we do that however, we should check to see if there is in fact anything new to download.

To do this, simply use "wc -l" to count the number of lines in the list of new URLs and save the resulting number.

31

If this number is zero, there is nothing to download, we can skip the download step.

As an additional check, we should see if the number of downloads exceeds some threshold value that we wish to set.

This is not a major problem with HPR, but some podcasts have hundreds of files in their RSS feed rather than just the most recent ones.

If we do exceed our download limit, then we need to log an error and skip downloading.

32

Assuming there are no problems so far however, the first thing we need to do is to extract the name of the audio file from the URL.

We can do that using the "basename" command.

We will use this to specify the name that we use when we save the audio file.

33

HPR has a very well formed file name.

Some podcasts do not however, and for those you would need to construct some sort of suitable name either using information found in the URL or simply creating a name using a time stamp.

34

Next we download the audio file using wget.

This is similar to how we downloaded the RSS feed, but with a few changes.

One is that I have increased the timeout to 90 seconds.

This may not have been necessary, but seemed like a good idea.

35

The next is that when specifying the output file name using -O, we use the file name we extracted from the URL.

The third is that we specify a destination directory using the -P option.

36

After wget has finished, including any retries that it had to do, we next check that the expected new file is both present and not empty.

We did this using an "if" statement with the "-s" option.

If the file was found and not zero, then we add that URL to a temporary list of downloaded URLs.

37

If the file was not present, or was zero length, we output an error message to an error log.

I will come back to this point later.

38

Next, if there is more that one podcast to download we sleep for 3 seconds.

While not strictly necessary, it is considered to be "polite" to not hammer a server repeatedly, but rather to put a small delay between file downloads..

39

After we have downloaded all the audio files in our list, we can add the list of URLs for the files downloaded to the permanent list.

While we are at it, we should use "tail" to trim the permanent log to keep it from growing indefinitely.

This limit should be several times bigger than the number of files in the RSS feed.

In this case I selected 50.

40

Finally we write any errors to the permanent error log, and also write these same errors to another file used to signal errors for display to the user.

We have now successfully downloaded at least one HPR podcast.

41 Notify the User of Events

It would be convenient to be informed of new podcast downloads when they occur, and also be notified of any errors.

One of the limitations of cron jobs is that they cannot access the user interface.

This means that we cannot readily send a message directly to the notification system to inform the user of the presence of new podcasts or of errors.

42 inotifywait

The solution to this is to use "inotifywait" to monitor particular files and directories for changes.

The man page for inotifywait states the following -

43

inotifywait efficiently waits for changes to files using Linux's inotify(7) interface. It is suitable for waiting for changes to files from shell scripts. It can either exit once an event occurs, or continually execute and output events as they occur.

End of quote.

44

In many Linux distros, inotifywait is provided by the "inotify-tools" package.

I won't go over all the features of inotifywait.

Instead, I will just describe how to use it for our purposes here.

45 inotifywait Modes

I should point out first though that inotifywait operates in two different modes.

In the normal default mode, it exits after being triggered by an event and must be re-established again in order to resume monitoring.

In monitor mode, which is enabled by using the "-m" option, it runs indefinitely, responding to events.

I will use the default mode here.

46

The man page for inotifywait provides a simple example that we could copy and modify for our purposes.

A great many examples that you will find are based on this example.

However, it doesn't quite do what we want, so we need to change a few things.

47 podfetchnotify

The first shell script is one which monitors for the arrival of new podcasts and sends a notification to the user.

I will call this "podfetchnotify".

The complete scripts are in the show notes, I will just provide a brief description here.

48 Setting Up Event Watches Using inotifywait

The script is enclosed in a while loop which run indefinitely.

In the first line inside the while loop, we call inotifywait.

inotifywait will then block until the event it is told to look for occurs.

In short, execution of the script will wait there until an event occurs.

49

The names of the events are listed in the man file.

In this case we are looking for "modify", "create", and "moved_to".

Each of these does pretty much as you would expect, reacting to modifying an existing file, creating a new file, or moving a file to that directory.

50 Problems When Testing Using Text Editors

I should point out that if you are testing a script which uses inotifywait, then modifying a file with a text editor may not produce the results that you may think it would.

Instead it treats this as a new file with the same name, with the original file being erased.

Since inotifywait attaches itself to the inode rather than the filename, it sees the file that the text editor changed as being a new file.

If you wish to test this realistically, then use "echo" to overwrite the file by using I/O redirection.

51 Capturing Output

In my example I capture the output from standard out into a variable, but I don't do anything with it.

If you wish to for example display the name of the newly downloaded podcast file, then use the --format option along with an appropriate formatting code.

There are details about this in the man page.

On the next line we capture the exit code using "$?"

52 Responding to Exit Codes

If the exit code was zero, then a monitored event was triggered and there should a new podcast in the directory.

In this case we display a message indicating that a new podcast has arrived.

I will describe how to send notifications shortly.

If the exit code was not zero, then an error occurred.

An example of such an error would be if the directory were not present when monitoring was started.

In this case we display a message indicating that a fatal error has occurred and then exit.

53 Delay for More Podcasts

Finally, we use "sleep" to wait for some arbitrary period of time to prevent notifications from being triggered multiple times if several podcasts were being downloaded in succession.

In this case I chose to wait for 60 seconds.

54

We have now completed the process and can return to the top of the loop and resume waiting using inotifywait.

55 Sending Notifications to the User

I mentioned above about sending notification messages to the user.

In the Gnome desktop, notification messages appear from the centre of the top bar in a list.

Other desktops or operating systems may have something similar.

56

To send a notification message to the notification area, you use the "notify-send" command.

Simply follow notify-send with a quoted string and it will be displayed in the notification area.

57 podfetcherrornotify

The second shell script is one which notifies the user of errors.

I will call this "podfetcherrornotify".

With this shell script we set up a watch on a file which contains any error messages from podfetch.

This script is very similar to podfetchnotify.

58

The exceptions are

With inotifywait we only monitor for "modify".

There is no sleep command at the end of the loop.

Instead we sleep for a few seconds just after getting the exit code from inotifywait.

This helps prevent problems caused by race conditions.

59

Next we check the inotifywait exit code.

If it was zero, then we read the error report file and send a notification message to the user containing that error message.

60

If it was not zero, then we check to make sure that the directory that should contain the error log exists.

If it does not exist, then we send a notification message to that effect to the user and terminate the script.

61

If the directory exists, then we check to see if the error message file used for signalling exists.

If the file does not exist, then we create it.

62

One of the reasons for an inotifywait error is that if the file that it is told to monitor does not exist, it cannot set up a watch condition.

By creating the file we correct the cause of the error and allow inotifywait to operate normally.

63

Finally we increment an error counter and check to see if the limit is exceeded.

If there are excessive errors, then send a notification message to the user and exit.

The reason for this is to give the user an indication that the error notifications are not working for some reason and there may be a problem that needs looking into.

64

The error counter is reset every time the inotifywait exit status is ok, so occasional unexpected glitches should be something that is ignored.

Of course podcast fetching errors are something that will probably happen only rarely if at all, so this final step may be seen as an unnecessary embellishment.

65 Installing the Scripts

Next I will describe how to install and prepare the scripts to run.

We need to perform the following steps.

66

• First, we need to create a directory to hold the scripts and their associated data files.

• Next we need to create a directory to hold the downloaded podcasts.

• Then we must copy the scripts to these directories and make them executable.

• Then, we must edit the scripts to have the file path in the script match the locations of the new directories that we created.

67

• Then we need to install xmllint, or alternatively modify the download script to comment out the use of xmllint and enable the alternative method using grep and sed instead.

• Then we need to run each script manually from the command line to check for errors.

• If podfetch ran correctly, it should download the most recent 10 podcasts during this test.

68 Adding podfetch to the Crontab

The above describes how to run the scripts manually.

In order to fetch podcasts automatically, we need to add the podfetch script to the cron schedule.

To do this, open a terminal.

69

Type "crontab -e", and then press return.

A text editor should open up containing the crontab file.

On Ubuntu, this editor is GNU nano.

Enter the appropriate cron parameters.

I will provide an example here for running it 12 minutes past the hour every three hours.

70

12 */3 * * * /home/username/pathtofiles/podfetch.sh

71

I won't explain cron in detail here.

The example that I have just given should be good enough for most people.

The "*/3" parameter will cause it to run every three hours.

The "12" parameter will cause it to run 12 minutes past the hour when it does run.

72

Checking every three hours should be good enough for most people, but you can adjust that as you see fit.

I would recommend however that you don't check more frequently than once per hour.

Checking more frequently than necessary puts extra load on the distribution servers.

It is very unlikely that you really do need each new episode the moment it is available.

73

I would also recommend changing the "12" parameter to some other random minute value.

I would suggest avoiding on the hour or on the half hour, as a lot of other people are probably checking at those times, and it would be better to spread the load out more evenly over time.

74

The file path parameter should of course match the actual path to wherever you have located the script, including the correct user name.

75 Making the Notification Scripts Start Automatically

The two notification scripts can be made to start automatically.

The exact method to do this may vary according to distribution or desktop.

76

On Ubuntu this is done using the Startup Applications Preferences GUI program, which should come already installed.

77

I won't go into details on this here, it should be fairly self evident how to use it once you see it.

What this program does is to create ".desktop" files in the ".config/autostart" directory in your home directory.

78

These ".desktop" files are all run automatically on start up.

Once you have added the notification scripts, you will need to log out and then log back in to make them active.

79 Conclusion

I this episode I explained how to write a set of simple shell scripts to automatically download each new episode of HPR as it comes out and to notify you of its arrival.

80

The download script described here is tailored specifically for use with HPR only.

However, it was derived from a larger script that downloaded other podcasts as well, based on information read in from a text file.

If you are feeling ambitious, you can add those features back into this to handle all of the podcasts that you listen to.

81

In a comment to another episode of HPR I had said that I would cover ID3 tags in MP3 files, but this episode is long enough now, so I will leave that subject for later.

I look forward to seeing you again later on another episode of Hack Public Radio.

# ======================================================================

podfetchdownloader

#!/bin/bash

# Fetch pending HPR podcasts listed in the HPR RSS feed.

# 8-Jun-2026

# Licensed under GPLv3 or later.

# ======================================================================

# Today's date and time as YYYYMMDDHHMMSS.

podttimestamp=$( date +"%Y%m%d%H%M%S" )

# The absolute path to the script. This is necessary when running it

# using a cron job.

podpath="/home/me/Apps/hprfetch"

# This is the absolute path to where to store the podcast files.

podfilepath="/home/me/Music/Podcasts/HPR"

# Create the full path names here for all the text files used.

podcastsfetched="$podpath/podcastsfetched.txt"

poderrorslog="$podpath/poderrorslog.txt"

poderrorsreport="$podpath/poderrorsreport.txt"

tmpoldurlssorted="$podpath/tmpoldurlssorted.txt"

tmppodsnew="$podpath/tmppodsnew.txt"

tmppodstodownload="$podpath/tmppodstodownload.txt"

tmppodserrors="$podpath/tmppodserrors.txt"

tmppodcastsfetched="$podpath/tmppodcastsfetched.txt"

tmplog="$podpath/tmplog.txt"

# The URL for the HPR RSS feed.

PodURL="http://hackerpublicradio.org/hpr_rss.php"

# Limit on number of podcasts to download.

DownloadLimit=11

# Name of the podcast.

PodName="Hacker Public Radio"

# ======================================================================

# Check if the required paths exist.

# If this path does not exist, cannot log the error.

if [[ ! -d "$podpath/" ]]; then

echo "$podttimestamp Error - Could not find $podfilepath."

exit 1

fi

# Where to store the podcast file fetched.

if [[ ! -d "$podfilepath/" ]]; then

echo "$podttimestamp Error - Could not find $podfilepath." >> $tmppodserrors

# Copy the errors log from the temporary errors file to the permanent files.

LogErrors

exit 1

fi

# ======================================================================

# Check if the podcast log exists. We read it before we write to it,

# so it must exist or we will hang on it not being present.

if [[ ! -e $podcastsfetched ]]; then

touch $podcastsfetched

fi

# ======================================================================

# Delete the specified files if they exist.

# This accepts multiple file names in a variable number of parameters.

CleanupFiles ()

{

# $@ accepts multiple parameters.

for f in "$@"; do

# Check if the file exists.

if [ -e "$f" ]; then

rm "$f"

fi

done

}

# ======================================================================

# Copy the errors log from the temporary errors file to the permanent files.

LogErrors () {

if [ -e $tmppodserrors ]; then

# The permanent log.

cat $tmppodserrors >> $poderrorslog

# This file is monitored for display by other scripts.

cat $tmppodserrors > $poderrorsreport

fi

}

# ======================================================================

# Get the URL data from an RSS feed

GetRSSURLData () {

wget --timeout=20 --tries=3 -O - "$PodURL" \

| xmllint --xpath "//channel/item/enclosure/@url" - | cut -d'"' -f2 \

| sort > $tmppodsnew

# This is an alternate method that does not use xmllint.

# However, it is not as robust. If someone were to include the

# first grep search pattern in their show notes, then it would

# look for that as a valid tag and output the following text

# as a URL.

#wget --timeout=20 --tries=3 -O - "$PodURL" | grep "<enclosure url=" \

# | sed -n 's/^.*enclosure//p' | sed -n 's/^.*url=//p' \

# | cut -d'"' -f2 | sort > $tmppodsnew

}

# ======================================================================

# Find which podcasts we do not already have.

FindNewPodcasts () {

cat $podcastsfetched | sort > $tmpoldurlssorted

comm -13 $tmpoldurlssorted $tmppodsnew > $tmppodstodownload

rm $tmpoldurlssorted

}

# ======================================================================

# Download the podcasts.

DownloadPodcasts() {

# Clear out previous temporary list of downloaded podcasts.

true > $tmppodcastsfetched

for i in $( cat $tmppodstodownload )

do

# Extract the file name from the URL.

fname=$( basename $i )

outputpodname="$podfilepath/$fname"

# Download the file.

wget --timeout=90 --tries=3 -P $podfilepath $i -O "$outputpodname"

# Check if the file exists and is not empty.

if [[ -s "$outputpodname" ]]; then

echo $i >> $tmppodcastsfetched

else

echo "$podttimestamp Error - $outputpodname was not found or is empty." >> $tmppodserrors

fi

# Delay a reasonable length of time between multiple downloads.

if (( $PodCount > 1 )); then

sleep 3

fi

done

# Add the list of files downloaded to the log.

# Check if the list exists and is not empty.

if [ -s $tmppodcastsfetched ]; then

cat $tmppodcastsfetched >> $podcastsfetched

# Trim the log file to keep it from growing indefinitely.

tail -n50 $podcastsfetched > $tmplog

mv $tmplog $podcastsfetched

fi

# Remove the tmp file now that we are done with it.

rm $tmppodcastsfetched

}

# ======================================================================

# Clean up any left over files.

CleanupFiles "$tmppodsnew" "$tmppodstodownload" "$tmppodserrors" "$tmppodcastsfetched"

# Get the RSS data.

GetRSSURLData

# Find which podcasts are new.

FindNewPodcasts

# Count how many new podcasts there are.

PodCount=$( cat $tmppodstodownload | wc -l )

# If no podcasts to download, skip this.

# If too many podcasts for this feed, then log an error and skip.

# This error will keep repeating until something is done about it.

if (( $PodCount > 0 )); then

if (( $PodCount > $DownloadLimit )); then

echo "$podttimestamp Too many podcasts for $PodName : $PodCount." >> $tmppodserrors

else

# Download the podcasts listed in the temp file.

DownloadPodcasts

fi

fi

# ======================================================================

# Copy the errors log from the temporary errors file to the permanent files.

LogErrors

# Clean up temp files.

CleanupFiles "$tmppodsnew" "$tmppodstodownload" "$tmppodserrors" "$tmppodcastsfetched"

# ======================================================================

END OF FIRST SHELL SCRIPT

START OF SECOND SHELL SCRIPT

podfetchnotify

#!/bin/bash

# Part of Podfetch.

# This monitors for new files appearing in the new podcasts directory.

# This should be run as a background task.

# Install it using the "Startup Applications" utility in Ubuntu.

# ======================================================================

# Path where new podcasts are to be stored.

podfilepath="/home/me/Music/Podcasts/HPR"

# ======================================================================

# Wait for the podcast directory to be modified.

while true; do

# Check for new files.

errmsg=$( inotifywait -e modify -e create -e moved_to $podfilepath )

result=$?

# Check if exited due to new podcast, or if some error.

if (( result == 0 )); then

# Success, signal new podcast.

notify-send "New HPR podcast available."

else

# Check to make sure the directory exists.

# If it doesn't exist, there isn't much we can do to fix it.

if [ ! -e "$poderrorspath" ]; then

notify-send "Podfetch error: Podcast directory not found $poderrorspath"

exit 1

fi

fi

# Wait a bit so that multiple new files don't keep re-triggering the notification.

sleep 60

done

# ======================================================================

END OF SECOND SHELL SCRIPT

START OF THIRD SHELL SCRIPT

podfetcherror

Created Tuesday 23 June 2026

#!/bin/bash

# Part of Podfetch.

# This monitors the Podfetch error reporting file for new errors.

# This should be run as a background task.

# Install it using the "Startup Applications" utility in Ubuntu.

# ======================================================================

# Where the Podfetch program error report file is located.

poderrorspath="/home/me/Apps/hprfetch"

# The full path and file name.

poderrorsreport="$poderrorspath/poderrorsreport.txt"

# ======================================================================

# Error counter.

errcount=0

# Wait for the poderrorsreport file to be modified.

while true; do

errmsg=$( inotifywait -e modify $poderrorsreport )

result=$?

# Wait a bit to ensure that writing to the file is complete.

sleep 3

if (( result == 0 )); then

# Get the latest error message.

# Cut out the date stamp at the start of the line and take the rest.

poderr=$( tail -n $poderrorsreport | cut -d" " -f2- )

notify-send "Podfetch error: $poderr"

# Reset the error counter every time there is a successful result.

errcount=0

else

# Check to make sure the directory exists.

if [ ! -e "$poderrorspath" ]; then

notify-send "Podfetch error: error report path not found $poderrorspath"

exit 1

fi

# Check if the file we are trying to monitor exists.

# If not, then create an empty file for error signaling.

if [ ! -e "$poderrorsreport" ]; then

echo > $poderrorsreport

fi

# Increment the error counter.

count=$(( count + 1 ))

if (( count > 3 )); then

notify-send "Podfetch error: Excessive unknown errors, exiting."

exit 1

fi

fi

done

# ======================================================================

Provide feedback on this episode.