Read more of this story at Slashdot.

Read more of this story at Slashdot.

Adobe Patches for May 2026

For May, Adobe released 10 bulletins addressing 52 unique CVEs in Adobe Commerce, After Effects, Adobe Connect, Illustrator, Media Encoder, Premiere Pro, Substance 3D Painter, Substance 3D Sampler, Content Authenticity SDK, and the Adobe Substance 3D Designer. Here’s this month’s overview table:

The obvious priority this month is the patch for Commerce, with its 15 bugs and deployment priority of 2. The Connect fix should also rank up there since both of its CVEs are CVSS 9s. Beyond those, it’s a pretty typical month for Adobe, with most of the bugs either being cross-site scripting (XSS) or open-and-own code executions.

Microsoft Patches for May 2026

This month, Microsoft released a whopping 138 new CVEs in Windows and Windows components, Office and Office Components, Microsoft Edge (Chromium-based), Azure, .NET and Visual Studio, Copilot Chat, Github Copilot, M365 Copilot, SQL Server, TCP/IP, and the Telnet Client – yes, the Telnet client. Two of these bugs were reported through the TrendAI ZDI program. 30 of these bugs are rated Critical, three are rated as Moderate, one is rated Low, and the rest are rated Important in severity.

This large volume of fixes follows the largest monthly release in Microsoft’s history and reflects the trend across the industry of a high number of submissions. While not all of these bugs were found by AI, it’s likely they had an AI-related component – even if it was just AI writing the submission. I should also point out the Pwn2Own Berlin occurs in just a few days, and it’s typical for vendors to patch as much as they can before the event.

None of the bugs patched by Microsoft this month are listed as publicly known or under active attack at the time of release, so we’ve got that going for us. Let’s take a closer look at some of the more interesting updates for this month, starting with a nasty-looking bug in DNS:

-    CVE-2026-41096 - Windows DNS Client Remote Code Execution Vulnerability
This patch fixes a heap-based buffer overflow in the DNS Client triggered by a malicious DNS response. No authentication or user interaction needed, and since the DNS Client runs on virtually every Windows machine, the attack surface is enormous. An attacker with a position to influence DNS responses (MitM, rogue server) could achieve unauthenticated RCE across your enterprise.

-    CVE-2026-41089 - Windows Netlogon Remote Code Execution Vulnerability
This update covers another CVSS 9.8 bug, which is a stack-based buffer overflow that lets an unauthenticated remote attacker execute code on a domain controller by sending a specially crafted network request — no credentials, no user interaction required. Yup – that makes it wormable. This is the highest-impact bug that requires immediate patching: a compromised domain controller is a compromised domain.

-    CVE-2026-42898 - Microsoft Dynamics 365 On-Premises Remote Code Execution Vulnerability
This bug rates a CVSS 9.9(!) and represents a code injection in Dynamics 365. It allows any authenticated user to execute code with a scope change, meaning exploitation can break out and affect resources beyond the vulnerable component itself. Scope changes are pretty rare, so if you’re running Dynamics 365 On-Prem, definitely test and deploy this patch quickly.

-    CVE-2026-40415 - Windows TCP/IP Remote Code Execution Vulnerability
This bug in the TCP/IP stack results from a use-after-free (UAF) and could allow a remote, unauthenticated threat actor to execute code without user interaction. That makes this another wormable bug. However, this one is much less likely to be exploited. The target needs to be under sustained low-memory (memory pressure) conditions, which is pretty rare. Still, no need to tempt fate here. Test and deploy this one quickly.

Here’s the full list of CVEs released by Microsoft for May 2026:

* Indicates this CVE had been released by a third party and is now being included in Microsoft releases.

† Indicates further administrative actions are required to fully address the vulnerability.

Looking at the other Critical-rated bugs in this month’s release, there are quite a few scary-looking bugs (including a CVSS 10!), but there’s no action for the end user as Microsoft has already mitigated these bugs and is just now documenting them. There’s also this month’s crop of Office bugs where the Preview Pane is an attack vector. However, the bug in Office for Android does not have the Preview Pane vector; it’s simple open and own. The bug in the WiFi driver needs a network adjacent attacker. The SharePoint bug requires authentication, but anyone with site privileges has the authentication needed. The bug in SSO Plugin for Jira & Confluence should really be called an authentication bypass, since it allows an unauthenticated attacker to gain access to a system.

Looking at the other code execution bugs, most are of the open and own variety as expected. The bug in Dynamic 365 (On Prem) requires high privileges. The Message Queueing bug requires an adjacent attacker. The bug in SQL Server requires authentication, but as usual, patching won’t be straightforward. Finally, there’s a bug in the kernel that leads to code execution. Most kernel bugs are privilege escalations, but this one could allow code execution if an attacker sends specially crafted NVMe over Fabrics (NVMe‑oF) response messages during the connection handshake process that contains an invalid header length value. Neat.

As usual, the vast majority of the Microsoft release fixes Elevation of Privilege (EoP) bugs. Also as usual, most simply lead to local attackers executing their code at SYSTEM-level privileges or administrative privileges, so there’s not much to add without further technical details about the bugs themselves. There are also a few bugs that just state the attacker could “gain ELEVATED privileges.” How obtuse. The bugs in Azure allow an attacker to access data otherwise hidden from them. The Edge bug allows threat actors to elevate to the privileges of the running application. The bug in Visual Studio allows attackers to get permissions associated with the MCP Server’s managed identity. Finally, there are a couple of sandbox escapes, too, which are always useful.

This month's update includes six Security Feature Bypass vulnerabilities. The most severe is in the Azure SDK for Java (CVSS 9.1). An attacker over the network can bypass the integrity protection provided by authentication tags on encrypted data, effectively manipulating encrypted input in a way that slips past integrity checks during decryption. Close behind is the bypass affecting the GitHub Copilot integration in Visual Studio Code (CWE-74). This one requires a user interaction, but it allows an attacker to circumvent the path validation safeguards that normally control which files Copilot is permitted to modify. The other Visual Studio Code bypass involves cross-site scripting, improper link resolution, and information exposure triggered when a user opens or views a maliciously crafted notebook. On the Windows networking side there are two bypasses. The first hits the Windows TCP/IP driver via an authentication bypass using an alternate channel. The other impacts the Windows Filtering Platform through improper access control, allowing a local, low-privileged attacker to bypass FQDN-based network security rules. Finally, there’s a Secure Boot bypass that, you guessed it, bypasses secure boot features.

Moving on to the Information Disclosure bugs fixed this month, we have 15 different CVEs. As usual, the majority of these simply result in info leaks consisting of unspecified memory contents or memory addresses. The bug in Power Automate could expose data marked “Sensitive” within Power Automate Desktop flows. One of the Word bugs could disclose NLTM hashes. The bug in Edge could disclose your cookies, which seems rude. The bug in Visual Studio could expose file path information. Finally, there’s a bug in Telnet for Windows 11 that leaks information being used by Telnet at the time. I didn’t even realize Windows 11 still had a telnet client.

The May release contains 10 spoofing bugs (plus the ones already addressed by Microsoft). The bug in Azure Machine Learning Notebooks vulnerability requires user interaction, but it could expose info through the Azure ML web interface to the attacker. There’s a cluster of fixes for Microsoft's mobile Office suite on Android. Excel, Word, and PowerPoint for Android all carry spoofing flaws rooted in improper access control. Two Copilot products are also affected by spoofing vulns. The M365 Copilot for Desktop has no details provided. The M365 Copilot for Android variant requires low privileges and producing only limited impact on confidentiality and integrity. Microsoft Teams for Android rounds out the mobile app spoofing bugs. Three Edge bugs close things out, all involving misrepresentation of information in the browser UI.

There are two Tampering bugs in this month’s release. The one in .NET Core allows threat actors to write files to an affected system. The other is in Outlook for iOS and manifests as a command injection bug.

There are eight DoS bugs in the May release, but as always, Microsoft provides little to no actionable information about the vulnerabilities. The most interesting from a practical standpoint are two TCP/IP bugs that allow a low-privilege Hyper-V guest to crash the host. Both are triggered from the adjacent network. On the broader network-exposure side, the ASP.NET Core bug is a straightforward infinite loop condition — an unauthenticated attacker sends a crafted request over the network and the server stops responding.

No new advisories are being released this month.

Looking Ahead

Assuming I survive Pwn2Own Berlin (which is looking iffy at the moment), I’ll return on June 9th on what will hopefully be a smaller release than this one. Until then, stay safe, happy patching, and may all your reboots be smooth and clean!

https://www.youtube.

The post Announcing Babylon.js 9.0 appeared first on Windows Developer Blog.

Read more of this story at Slashdot.

A remote code execution vulnerability has been reported in Microsoft Windows Notepad. The vulnerability is due to improper validation of links in Markdown files.

A remote attacker could exploit this vulnerability by enticing the victim to download and interact with a malicious file. Successful exploitation of this vulnerability could result in the execution of arbitrary commands in the security context of the victim's account.

The Vulnerability

Microsoft Windows comes with a default text-editing application called Windows Notepad. Historically, this application offered only minimal editing features. However, modern versions of Windows include an improved and extended Notepad by default. This new version supports multiple file formats, Markdown rendering, and Copilot-enhanced features.

Markdown is a lightweight markup language that allows users to create formatted text using a simple syntax. It is widely used for writing documents, blog posts, and README files. It supports a wide range of formatting options, including (but not limited to) headers, styled text, numbered and bulleted lists, and links. Markdown supports two main link formats: standard and inline. The standard link format is:

          [link-name](link/path)

When rendered, only the link text ("link-name") is shown to the user.

The inline links use the following format:

          <link/path>

When rendered, they are transformed into the equivalent standard link:

          [link/path](link/path)

A remote code execution vulnerability has been reported in Microsoft Windows Notepad. The vulnerability is due to improper validation of links when handling Markdown files.

When Notepad opens a file, if the application detects that the file requires special rendering (in this case, Markdown), the input file is tokenized. Tokenization in this context means splitting the raw file text into a sequence of small, recognizable pieces ("tokens") that the renderer can process one by one. Detection is performed based on the file extension. Only the ".md" extension was found to trigger Markdown rendering, as the application uses a fixed string comparison to determine whether Markdown should be rendered by calling sub_1400ED5D0(). Markdown files are rendered token by token.

Function sub_140170F60() handles clicking on links in Markdown files. It filters the link value, and passes it to ShellExecuteExW() call.

The filtering performed on the link is found to be insufficient, as it allows using malicious crafted protocol URIs, such as "file://" and "ms-appinstaller://", to execute arbitrary files in the security context of victim. ShellExecuteExW() uses the configured protocol handlers and may expose additional exploitable protocols depending on the system configuration.

A remote attacker could exploit this vulnerability by enticing the victim to download a malicious crafted Markdown file, open it, and click on a malicious link. Successful exploitation of this vulnerability could result in the execution of arbitrary commands in the security context of the victim's account.

Notes
• Files using the ".md" file extension are not registered to be opened by Notepad by default. However, when opened manually in Notepad, they are rendered as Markdown, which allows the vulnerability to be triggered.
• Any "\\" sequences are converted to "\" in the attacker-controlled link path prior to passing it to the ShellExecuteExW() call.

Source Code Walkthrough

The following code snippet was taken from Notepad.exe version 11.2508. Comments added by TrendAI researchers have been highlighted.

In sub_140170F60():

Detection Guidance

To detect an attack exploiting this vulnerability, the detection device must monitor and parse traffic on the following application protocols that can be used to deliver an attack to exploit this vulnerability:
• FTP, over ports 21/TCP, 20/TCP
• HTTP, over port 80/TCP
• HTTPS, over port 443/TCP
• IMAP, over port 143/TCP
• NFS, over ports 2049/TCP, 2049/UDP, 111/TCP, 111/UDP
• POP3, over port 110/TCP
• SMTP, over ports 25/TCP, 587/TCP
• SMB/CIFS, over ports 139/TCP, 445/TCP

The detection device must inspect traffic transferring a Markdown file with the file extension ".md". If such a file transfer is found, the detection device must search the file content for links.

The detection device must check whether the link paths contain the strings "file:" or "ms-appinstaller:".

If "file:" was found, the detection device must search the Markdown file contents using the following case-insensitive regular expression:

(\x3C|\[[^\x5d]+\]\()file:(\x2f|\x5c\x5c){4}

If "ms-appinstaller:" was found, the detection device must search the Markdown file contents using the following case-insensitive regular expression:

(\x3C|\[[^\x5d]+\]\()ms-appinstaller:(\x2f|\x5c\x5c){2}

If any of the regular expressions matches, the link contains a path to a remote resource. The traffic must be considered malicious; an attack exploiting this vulnerability is likely underway. This guidance should also detect the public PoC that was recently posted on GitHub.

Notes

•  The string matches are case-insensitive.
•  The detection guidance is based on the vendor-provided patch. However, the patch restricts the links to local-only files and HTTP(S) URIs, which may result in a huge number of false positives. Because of that, the detection guidance focuses on formats that may access and execute remote files. Due to that, it may result in false negatives.
•  The vulnerable function uses the configured protocol handlers and may expose additional exploitable protocols depending on the system configuration.

Conclusion

This vulnerability was patched by Microsoft in the February 2026 release cycle. They note no workarounds but do list user interaction as a prerequisite to exploitation. To fully remediate the vulnerability, the proper action is to test and deploy the provided vendor patch.

Special thanks to Nikolai Skliarenko and Yazhi Wang of the TrendAI Research team for providing such a thorough analysis of this vulnerability. For an overview of TrendAI Research services please visit https://go.trendmicro.com/tis/vulnerabilities.html.

The threat research team will be back with other great vulnerability analysis reports in the future. Until then, follow the team on Twitter, Mastodon, LinkedIn, or Bluesky for the latest in exploit techniques and security patches.

A command injection vulnerability has been reported in Arista NG Firewall. The vulnerability is due to improper validation of user data in the diagnostics component.

A remote, authenticated attacker could exploit this vulnerability by sending crafted requests to the target server. Successful exploitation could result in arbitrary command execution under the security context of the root user.

The Vulnerability

Arista NG Firewall is an open-source firewall appliance. It was originally developed under the name Untangle. Some features of Arista Firewall include spam blocking, bandwidth control, and IPS, etc. NG Firewall can be managed through a web user interface, or a JSON-RPC API using HTTP.

HTTP is a request/response protocol described in RFCs 7230 - 7237 and other RFCs. A request is sent by a client to a server, which in turn sends a response back to the client. An HTTP request consists of a request line, various headers, an empty line, and an optional message body

where CRLF represents the new line sequence Carriage Return (CR) followed by Line Feed (LF). SP represents a space character. Parameters can be passed from the client to the server as name-value pairs in either the Request-URI, or in the message-body, depending on the Method used and Content-Type header. For example, a simple HTTP request passing a parameter named “param” with value “1”, using the GET method might look like:

A corresponding HTTP request using the POST method might look like:

If there is more than one parameter/value pair, they are encoded as '&'-delimited name=value pairs:

          var1=value1&var2=value2&var3=value3...

The component relevant to this report is the JSON-RPC endpoint. A JSON object has the following syntax:

•            An object is enclosed in curly braces {}.
•            An object consists of zero or more items delimited by a comma (",") character.
•            An item consists of a key and a value. A key is delimited from its value by a colon (":") character.
•            A key must be a string (enclosed in quotes).
•            A value must be a valid type. Valid types include string, number, JSON object, array, Boolean, or null.
•            An array is an object enclosed in square braces []. An array consists of zero or more string, number, JSON object, array, Boolean or null type-objects delimited by a comma (",") character.

An example JSON object is as follows:

The following is an example of a JSON-RPC request to the runTroubleshooting() method that is relevant to this report:

A command injection vulnerability has been reported in Arista NG Firewall. The vulnerability is due to improper validation of user data that is used in a command line. The runTroubleshooting() method of the class NetworkManagerImpl will be used to handle JSON-RPC requests to the runTroubleshooting method. The command parameter passed to the method will be the first element in the params JSON array in the body of the request. This value must be one of the strings in the TroubleshootingCommands enum defined in the NetworkManager class. The second parameter of the method will contain additional arguments passed to the JSON-RPC call.

The method will first iterate through each of the additional arguments and combine each key value pair into a single string, separated by a "=" character that will later be used as an environment variable. Next, a switch case statement is used to ensure the provided command is one of the values in TroubleshootingCommands. Each command value will be processed using the same code.

The method will next iterate through each environment variable, and inspect it for the following common command injection strings:

          ; & | > $(

If any are found, the request will be rejected, and an exception is thrown. If each environment variable is valid, the method execEvil() is called to create and execute a command line for the network-troubleshooting.sh script, with the environment variables passed as a parameter. The execEvil() method in turn will call Runtime.getRuntime().exec() to run the script, with the second parameter passing the environment variables that will be used by the script. Each command value will have a function in network-troubleshooting.sh, such as run_dns() for the “DNS” command value. Each function will follow a similar structure, by creating a CMD string using the environment variables passed by exec() and then calling eval to execute it.

However, the values of the parameters passed to the runTroubleshooting JSON-RPC method are not completely sanitized before it is used in the command line. While the parameters passed to the endpoint are inspected for some shell metacharacters, the list is incomplete. For example, the backtick character (`) is not included in the check and may be used to inject a command.

For example:

The example above will write and execute a python script on the server to achieve code execution without using any restricted characters.

A remote, authenticated attacker could exploit this vulnerability by sending a JSON-RPC request to the runTroubleshooting method containing a crafted “HOST” or “URL” parameter containing shell metacharacters not present in the runTroubleshooting() check. Successful exploitation in the worst case will result in arbitrary command execution under the security context of the root user.

Detection Guidance

To detect an attack exploiting this vulnerability, the detection device must monitor and parse traffic on the following ports:
          - HTTP, over port 80/TCP
          - HTTPS, over port 443/TCP

Traffic to Arista NG Firewall may be encrypted and must be decrypted prior to applying this guidance.

The detection device must search for HTTP POST requests made to the request-URI /admin/JSON-RPC. If found, the body of the request must be parsed as JSON. The JSON object in the body must be inspected for a method key, and its value must be inspected to contain the substring runTroubleshooting. If found, the object must also be inspected for the JSON key "params", with a value containing a JSON array. The first entry in the JSON array must be inspected for any of the following strings:

If found, the second entry in the array must be inspected for a JSON object, and inspected for any of the following keys:

If either is found, the corresponding value to the key must be inspected for any of the following command injection characters:

If found, the traffic should be treated as suspicious; an attack exploiting this vulnerability is likely underway.

The following regular expression can be applied to find malicious requests:

          /\x22(HOST|URL)\x22\s*:\s*\x22(?:[^\x22\\]|\\.)*?[\x60\x27\x24\x3c]/

Notes:

• String matching on the request-URI and all JSON strings should be done in a case sensitive manner.
• The JSON strings may be encoded and must be decoded prior to applying this guidance.
• The request-URI may be URL-encoded and must be decoded before applying this guidance.

Conclusion

This vulnerability has been addressed by Arista with their Security Advisory 0123. They note that the Arista Edge Threat Management - Arista Next Generation Firewall (Formerly Untangle) is affected by this bug, but other product versions are not. They also state the following mitigation can be applied:

Do not allow non-authorized administrative access or access to the administrative browser.

However, the more appropriate action is to apply the provided vendor security patch by upgrading to version 17.4 or higher.

Special thanks to Jonathan Lein and Simon Humbert of the TrendAI Research team for providing such a thorough analysis of this vulnerability. For an overview of TrendAI Research services, please visit https://go.trendmicro.com/tis/vulnerabilities.html.

The threat research team will be back with other great vulnerability analysis reports in the future. Until then, follow the team on Twitter, Mastodon, LinkedIn, or Bluesky for the latest in exploit techniques and security patches.

Adobe Patches for March 2026

For March, Adobe released eight bulletins addressing 80 unique CVEs in Adobe Acrobat Reader, Commerce, Illustrator, Substance 3D Painter, Premier Pro, Experience Manager, Substance 3D Stager, and the Adobe DNG Software Development Kit (SDK). Two of these bugs were submitted through the TrendAI ZDI program. If you need to prioritize, the update for Acrobat likely has the most impact, with the patch fixing two Critical-rated and one Important bugs. The fix for Experience Manager is the largest this month with 33 CVEs addressed. However, these are simple cross-site scripting (XSS) bugs, so it’s not too exciting. The fix for Commerce is also quite large with 19 CVEs. Most of these are also XSS bugs, but there’s a few security feature bypass bugs in there, too. Adobe actually gives this patch a deployment priority of 2, but it’s not under active attack at the time of release.

The fix for Illustrator corrects seven bugs, including a few Critical-rated ones. The patch for Substance 3D Painter fixes nine different CVEs, all rated Important. That’s not the case for Substance 3D Stager, which fixes six different Critical bugs that could lead to arbitrary code execution. The patch for the Adobe DNG Software Development Kit (SDK) addresses one Critical and one Important bug. Finally, the update for Premiere Pro correct a single, Critical-rated bug that could lead to arbitrary code execution.

None of the bugs fixed by Adobe this month are listed as publicly known or under active attack at the time of release, and beyond the update for Commerce, all of the other updates released by Adobe this month are listed as deployment priority 3.

Microsoft Patches for March 2026

This month, Microsoft released 84 new CVEs in Windows and Windows components, Office and Office Components, Microsoft Edge (Chromium-based), Azure, SQL Server, Hyper-V Server, and the Windows Resilient File System (ReFS). Counting the third-party and Chromium updates listed in the release, it brings to total number of CVEs to 94. Five of these bugs were reported through the TrendAI ZDI program. Eight of these bugs are rated Critical, and the rest are rated Important in severity.

This volume is relatively typical for a March release, and the lack of bugs under active attack is a nice change from last month. There are two vulnerabilities listed as publicly known at the time of release, but none listed as actively exploited.

Let’s take a closer look at some of the more interesting updates for this month, starting with a bug with an AI slant:

-    CVE-2026-26144 - Microsoft Excel Information Disclosure Vulnerability
This is a fascinating bug and an attack scenario we’re likely to see more often. The vulnerability is a simple cross-site scripting (XSS) bug in Excel, but an attacker could use it to cause the Copilot Agent to exfiltrate data off the target. This essentially makes it a zero-click information disclosure. Although not stated, the disclosure is likely at the level of the logged-on user, so there isn’t a privilege escalation component. Info disclosures rarely get rated Critical, but it makes sense here.

-    CVE-2026-26110/CVE-2026-26113 - Microsoft Office Remote Code Execution Vulnerability
Another month and another pair of Office bugs where the Preview Pane is an exploit vector. I’ve lost count of how many of these bugs have been patched over the last year, but it’s just a matter of time until they start appearing in active exploits. The latest versions of Outlook allow you to hide the Preview Pane, but it isn’t clear if this would mitigate these attacks. The best option is still to test and deploy the update, but considering how many of these patches exist, it’s likely further updates will be needed to fully address these issues.

-    CVE-2026-23669 - Windows Print Spooler Remote Code Execution Vulnerability
Just reading the title makes me twitch with remembrances of Print Nightmare from a few years ago. This bug works in the same manner as those exploits. An authenticated attacker sends specially crafted messages to an affected system to gain arbitrary code execution. No user interaction is required. Let’s hope we don’t end up in a new nightmare of spooler exploits. Test and deploy this one quickly.

-    CVE-2026-23668 - Windows Graphics Component Elevation of Privilege Vulnerability
This vulnerability was submitted to the ZDI program by Marcin Wiązowski as two separate bugs, and it demonstrates the need for variant investigations when creating security patches. Both cases are caused by the lack of proper locking when performing operations on an object. However, in one case, it’s in the cdd.dll driver while the other is in the win32kfull driver. Either way, an attacker could use these to elevate privileges to SYSTEM and execute arbitrary code. Since the fix for both is to add object locking to the GDI object, the cases are combined into a single CVE. That’s not a problem, but it does show how variants can occur, and fixes should be as broad as possible.

Here’s the full list of CVEs released by Microsoft for March 2026:

* Indicates this CVE had been released by a third party and is now being included in Microsoft releases.

† Indicates further administrative actions are required to fully address the vulnerability.

Looking at the other Critical-rated bugs in this month’s release, they are all cloud-native and require no user action. Microsoft has already remediated the vulnerabilities.

Moving on to the other code execution bugs, the vulnerabilities in SharePoint Server pop out first. Both require authentication, but it’s essentially the lowest level of authentication, so these would be ideal cases for lateral movement within an enterprise. There are the standard open-and-own cases within Office components. There an interesting sounding bug in the Windows Mobile Broadband Driver that requires physical access, but Microsoft doesn’t elaborate on the attack scenario beyond that fact. The bug in the System Image Manager Assessment and Deployment Kit (ADK) requires authentication. The bug in GDI requires user interaction. The remaining code execution bugs are in the RRAS protocol. We’ve seen bugs in this component in the past, but never in the wild. I wouldn’t ignore these, but I wouldn’t rush them out either.

Similar to last month, updates for Elevation of Privilege (EoP) bugs make up nearly half of this month’s release. And as we saw last month, but most simply lead to local attackers executing their code at SYSTEM-level privileges or administrative privileges. The bugs in SQL Server allow attackers to elevate to SQL sysadmin privileges. The bug in the Azure MCP Server is more complex. It allows attackers to obtain the permissions associated with the MCP Server’s managed identity, which lets them perform actions that the managed identity is able to reach. The bug in the Azure AD SSH Login extension for Linux leads to root access, and it won’t be easy to patch. You’ll need to run the update instructions from the command line on each affected system. That’s the same case for the bug in the Linux Azure Diagnostic extension (LAD). There’s an odd bug in the Hybrid Worker Extension (Arc‑enabled Windows VMs) that leads to “ELEVATED” privileges, which is something I’ve never seen before. The bug in the Broadcast DVR component allows an attacker to go from low integrity level up to medium. There’s a bug listed as an EoP in the Push message Routing Service, but reading the description, Microsoft notes it could lead to an information disclosure. It’s likely this is an error and should be an Information Disclosure bug. The final EoP is in the Azure Portal Windows Admin Center and leads to SYSTEM. However, there’s no patch to remediate this bug. Instead, you need to install the latest version of the Windows Admin Center extension through the Azure Portal by hand.

There are two security feature bypass patches in the March release. The first is a bypass of the MapURLToZone method, which (as expected) allows attackers to bypass MapURLToZone protections. The third bypass is in Kerberos and could allow an attacker to either view some sensitive information or make changes to “disclosed” information. This is a race condition that occurs while the group policy is being reapplied, so the window to exploit this would be extremely small.

Looking at the remaining info disclosure bugs getting patched this month, only two result in info leaks consisting of unspecified memory contents or memory addresses. Ther others provide more interesting results. There are three bugs in the Azure IoT Explorer have some wide-ranging implications. According to Microsoft, exploitation could result in, “device connection information, authentication tokens, request data, file paths, and other information transmitted between the application and the IoT Hub.” The bug in Authenticator almost reads like a security feature bypass, as exploit results in the disclosure of a one‑time sign‑in code or authentication deep link. The attacker would receive the sign‑in information and could potentially use it to authenticate as the user, allowing access to information or services available to that account. The last info disclosure bug is in the Accessibility Infrastructure and allows an attacker to gain secrets or privileged information belonging to the user of the affected application.

There are only four spoofing bugs in the March release. The first is in SharePoint server and manifests as an XSS. The second bug is a Server-Side Request Forgery (SSRF) in the Azure IoT Explorer. The remaining two are a bit more cryptic. The bug in Windows Shell Link Processing results from the “exposure of sensitive information to an unauthorized actor,” and could lead to spoofing. That sounds like credential exposure, but it’s not explicitly called out. The final spoofing bug results from the insufficient verification of data authenticity in Windows App Installer. Again, this sounds vaguely like credential reflection, but without further information, we can only speculate.

Finally, there are four denial-of-service (DoS) bugs in the release, including one that’s listed as publicly known in the .NET Framework. As usual, Microsoft provides no actionable information about these bugs.

No new advisories are being released this month.

Looking Ahead

I plan on being at RSA for the first time in my career, so if you’re around, please stop by and say hello. I like it when people say hello. Otherwise, I’ll be back on April 14 with my assessment of that patch Tuesday release. Until then, stay safe, happy patching, and may all your reboots be smooth and clean!

Adobe Patches for April 2026

For April, Adobe released 12 bulletins addressing 61 unique CVEs in Adobe Acrobat Reader, InDesign, InCopy, FrameMaker, Connect, ColdFusion, Bridge, Photoshop, Illustrator, Experience Manager Screens, and the Adobe DNG SDK. Three of the Cold Fusion bugs came through the TrendAI ZDI program. For this month, I’m introducing an Adobe table as well. I’d love to get your feedback on whether this is helpful.

Obviously, the active attack in Reader is the highest priority for this month, but don’t ignore the second bunch of Reader patches. Cold Fusion also gets a deployment priority of 1, so if you’re still running that platform, make sure you get the update. Otherwise, the FrameMaker and Connect patches fix 11 and nine bugs, respectively. InDesign and Experience Manager Screens also have nine CVEs addressed.

Outside of the Reader bug, none of the other bugs fixed by Adobe this month are listed as publicly known or under active attack at the time of release. One of the Reader bugs and Cold Fusion have a deployment priority of one, the other Reader bug has a priority of two, while all of the other updates released by Adobe this month are listed as deployment priority 3.

Microsoft Patches for April 2026

This month, Microsoft released a monstrous 163 new CVEs in Windows and Windows components, Office and Office Components, Microsoft Edge (Chromium-based), Azure, .NET and Visual Studio, SQL Server, Hyper-V Server, BitLocker, and the Windows Wallet Service. Counting the third-party and a huge Chromium release, it brings the total number of CVEs to a staggering 247 updates. Six of these bugs were reported through the TrendAI ZDI program. Eight of these bugs are rated Critical, two are rated as Moderate, and the rest are rated Important in severity.

By my count, this is the second-largest monthly release in Microsoft’s history. There are many things we could speculate on to justify the size, but if Microsoft is like the other programs out there (including ours), they are likely seeing a rise in submissions found by AI tools. For us, our incoming rate has essentially tripled, making triage a challenge, to say the least. Whatever the reason, we have a lot of bugs to deal with this month. I should also point out that the Pwn2Own Berlin occurs next month, and it’s typical for vendors to patch as much as they can before the event.

There is one Microsoft bug listed as under active attack at the time of release, and one other that’s publicly known. Let’s take a closer look at some of the more interesting updates for this month, starting with the vulnerability being exploited in the wild:

-    CVE-2026-32201 - Microsoft SharePoint Server Spoofing Vulnerability
Microsoft doesn’t provide a lot of information about this bug, but Spoofing bugs in SharePoint often manifest as cross-site scripting (XSS) bugs. They do note that attackers could view information or make changes to disclosed information. As always, they don’t provide any information on how widespread these attacks are, but I wouldn’t wait to test and deploy this fix – especially if you have internet-connected SharePoint servers.

-    CVE-2026-33825 - Microsoft Defender Elevation of Privilege Vulnerability
This bug is listed as publicly known, and this time, we know exactly where it was disclosed. There have been some questions about how exploitable this bug may be, but it does look like it’s a real problem – just with some reliability issues in its current state. I won’t add on to the commentary from the researcher about working with Microsoft. I’m just glad they are offering a fix for the vulnerability. If you rely on Defender, test and deploy this one quickly.

-   CVE-2026-33827 - Windows TCP/IP Remote Code Execution Vulnerability
This vulnerability allows remote, unauthenticated attackers to exploit code on affected systems without user interaction. That adds up to a wormable bug – at least on systems with IPv6 and IPSec enabled. It is a race condition, which sets exploitability to High on the CVSS scale, but we see race conditions exploited at Pwn2Own all the time, so don’t rely on that obstacle. If you’re running IPv6, I would test and deploy this fix quickly before public exploits become available.

-    CVE-2026-33824 - Windows Internet Key Exchange (IKE) Service Extensions Remote Code Execution Vulnerability
Speaking of wormable bugs, here’s our second one this month. By the title, we can tell that systems with IKE enabled are affected, but that leaves plenty of targets for attackers. Microsoft also notes a significant mitigation for this bug. Blocking UDP ports 500 and 4500 at the perimeter prevents external attackers from reaching the affected service. However, insiders could still target this for lateral movement within an enterprise. For enterprises using IKE, get this fix tested and deployed with haste.

Here’s the full list of CVEs released by Microsoft for April 2026:

* Indicates this CVE had been released by a third party and is now being included in Microsoft releases.

† Indicates further administrative actions are required to fully address the vulnerability.

Looking at the other Critical-rated bugs in this month’s release, there are three Office-related bugs where the Preview Pane is once again listed as an exploit vector. I would still like to have a full-proof way of disabling the Preview Pane, but I don’t see that as an option. There’s a bug in the RDP client, but that involves connecting to a malicious RDP server. The bug in Active Directory requires authentication and a network adjacent attacker. The final Critical-rated bug is an interesting DoS in .NET Framework. An unauthenticated attacker could deny service over a network – presumably crippling any affected app made in .NET. You rarely see Critical-rated DoS bugs, but this one deserves the moniker.

Moving on to the other code execution bugs, you have quite a few open-and-own bugs in Office components, most notably Excel, where the Preview Pane is not an attack vector. The bug in SQL Server requires authentication, and as usual, additional steps are needed to ensure you have the correct update to remediate this vulnerability. The two bugs in Hyper-V almost reads like a privilege escalation since it allows unauthorized attackers to execute code locally. That’s the same for the bugs in the Windows Snipping Tool and the UPnP Device host.

More than half of this release addresses Elevation of Privilege (EoP) bugs. However, most simply lead to local attackers executing their code at SYSTEM-level privileges or administrative privileges, so there’s not much to add without further technical details about the bugs themselves. The bugs in SQL Server could allow an attacker to gain SQL sysadmin privileges. One of the kernel bugs simply states an attacker could “elevate privileges locally”. How obtuse. That’s similar for the bug in afd.sys and Desktop Windows Manager, but Microsoft also states that these bugs could crash an affected system. There are several bugs that result in a sandbox escape, including Windows Push Notifications, AFD for Winsock, Management Services, and User Interface Core. Of these, CVE-2026-26167 (Push Notifications) is the most notable — it's the only one with low attack complexity, meaning no race condition needed. The rest all require winning a race condition (AC:H). The bugs in UPnP are interesting as they allow attackers to gain access to a limited set of administrator-protected objects. Not a full escalation but definitely getting access to resources they shouldn’t. The vulnerability in the Brokering File System allows attackers to gain the level of the logged on user, so don’t do your normal activities as a user with admin privileges. The bug in Azure Monitor Agent leads to root-level access.

There are a dozen different security features bypass bugs in the April release. Some of these are obvious by the title alone. For example, the bugs in Windows Hello bypass safety features within the Hello app itself. The bug in the Biometric Service allows attackers to bypass biometric protections. The vulns in BitLocker and Secure Boot bypass protections in those components. The bug in Power Apps allows attackers to bypass a security warning dialog and trick targets into triggering an external protocol call that performs unintended actions on the user’s device. The bug in Windows Shell allows attackers to bypass Mark of the Web (MotW) protections. The bug in PowerShell could almost be described as a code execution bug as exploiting it bypasses dynamic-expression security checks, which could result in code execution. The vulnerability in the Windows Recovery Environment allows local attackers to bypass BitLocker device encryption. Finally, the bug in Virtualization‑Based Security (VBS) is the most interesting of the bunch – and not just because VBS is a (relatively) new feature. The problem allows attackers to manipulate allow a compromised Windows kernel to modify memory belonging to the secure kernel, breaking the intended isolation guarantees provided by VBS. Somewhat of a sandbox escape, but this time, you’re escaping from Virtual Trust Level 0 (VTL0) to Virtual Trust Level 1 (VTL1). Neat.

Moving on to the Information Disclosure bugs fixed this month, we have 20 different CVEs. Fortunately, most of these simply result in info leaks consisting of unspecified memory contents or memory addresses. While useful in crafting exploits, they aren’t exactly exciting on their own. There are also several bugs that disclose addresses from an object a contained in a sandboxed execution environment. This includes bugs in the Print Spooler, Package Catalog, and Web Account Manager. The bug in Dynamics 365 discloses the ever ineffable “sensitive information”. There are three different info disclosure bugs in UPnP. Two allow an attacker to read from the file system, while the third discloses anything available to the LOCAL SERVICE account. The final info disclosure bug resides in Copilot and Visual Studio and allows attackers to disclose the contents of the Model Context Protocol (MCP) when using Copilot. There are those who think MCP is dead (thanks to agentic AI agents), but if you’re using a custom MCP, I doubt you would want it leaked.

The April release contains just a handful of Spoofing bugs. Some, like the bugs in .NET, Active Directory, and Windows Shell, just say that they allow spoofing over a network. Others, like the bug in Windows Snipping Tool, say similar but also note that it could be used to relay NTLMv2 hashes. The patch for RDP notes that there are new warning dialogs coming this month. The bug in the Windows Admin Center would allow an attacker to interact with other tenant’s applications and content. Finally, the spoofing bug in SharePoint is another XSS issue.

There are eight DoS bugs in the April release, but as always, Microsoft provides no actionable information about the vulnerabilities. Microsoft does offer a mitigation for the http.sys bug that can be applied while you test and deploy the patch, but I would rely on the patch rather than the mitigation. Another exception is the bug for Connected User Experiences and Telemetry Service, which allows attackers to deny service locally rather than over the network.

The final(!) bug in the April release is a Tampering bug in WSUS that reads like a DoS. According to Microsoft, “An attacker can send specially crafted packets which could affect availability of the service and result in Denial of Service (DoS).” But sure – let’s call it Tampering.

No new advisories are being released this month.

Looking Ahead

I will be in Berlin for the next Patch Tuesday, which will be May 12, and I’ll provide my full thoughts then on what will hopefully be a smaller release than this one. Until then, stay safe, happy patching, and may all your reboots be smooth and clean!

Executive summary 

A group of Russian state-supported cyber actors has been targeting and compromising various Western government and commercial organizations using the Zimbra Collaboration Suite (ZCS) software since at least July 2025. The Russian state-supported advanced persistent threat (APT) group’s activity is tracked in the cybersecurity community under several names (see Cybersecurity industry tracking), primarily as “LAUNDRY BEAR,” a name initially coined by the Netherlands General Intelligence and Security Service (AIVD) and Defence Intelligence and Security Service (MIVD) [1].

LAUNDRY BEAR’s targeting is almost certainly to gather sensitive information for the Russian Federation, with these actors primarily focusing on the covert acquisition of email data. Previous campaigns indicated LAUNDRY BEAR relied on unsophisticated initial access techniques—including password spraying, phishing, and pass-the-cookie—allowing the group to successfully run high-volume operations. The latest campaign targeting ZCS uses a novel exploit that was a zero-day vulnerability when first exploited and continues to be successfully exploited. The vulnerability, Common Vulnerabilities and Exposures (CVE) CVE-2025-66376, was patched in November 2025. This demonstrates LAUNDRY BEAR’s intent and ability to deploy increasingly sophisticated technical capabilities.

Unlike traditional phishing campaigns that persuade a user into taking an action, such as clicking a link or opening a file, LAUNDRY BEAR’s latest campaign leverages a view-based exploit that only requires a user to view a malicious email within a vulnerable version of the webmail service. Once viewed, the exploit attempts to exfiltrate the victim’s last 90 days of email communications, the organization email directory (i.e., Global Address List [GAL]), and other sensitive information to servers controlled by LAUNDRY BEAR. The exploit also attempts to establish persistent access to victim accounts through a variety of means as detailed in the Persistence and credential access section.

This Cybersecurity Advisory (CSA) warns of this ongoing malicious threat activity and urges organizations to update their vulnerable software and implement additional mitigations to thwart these Russian state-supported actors’ continued success. The CSA is being released by the following authoring and co-sealing agencies:

• United States National Security Agency (NSA)
• United States Federal Bureau of Investigation (FBI)
• Netherlands Defence Intelligence and Security Service (MIVD)
• Netherlands General Intelligence and Security Service (AIVD)
• United States Cybersecurity and Infrastructure Security Agency (CISA)
• United States Defense Counterintelligence and Security Agency (DCSA)
• United States Department of Defense Cyber Crime Center (DC3)
• United States Department of the Treasury
• United States Naval Criminal Investigative Service (NCIS)
• Australian Signals Directorate’s Australian Cyber Security Centre (ASD’s ACSC)
• Communications Security Establishment Canada’s (CSE’s) Canadian Centre for Cyber Security (Cyber Centre)
• New Zealand National Cyber Security Centre (NCSC-NZ)
• United Kingdom National Cyber Security Centre (NCSC-UK)
• Czech Republic National Cyber and Information Security Agency (NÚKIB)¹
• Danish Defence Intelligence Service (DDIS)²
• Estonian Foreign Intelligence Service (EFIS)³
• Finnish Defence Intelligence (FDI)⁴
• Finnish Security and Intelligence Service (SUPO)⁵
• French General Directorate for Internal Security (DGSI)⁶
• French National Cybersecurity Agency (ANSSI)⁷
• Italian External Intelligence and Security Agency (AISE)⁸
• Italian Internal Intelligence and Security Agency (AISI)⁹
• Security and Intelligence Service of the Republic of Moldova (SIS RM)¹⁰
• Polish Foreign Intelligence Agency (AW)¹¹
• The Military Counterintelligence Service of Poland (SKW)¹²
• Spain National Intelligence Centre (CNI)¹³
• Sweden National Cyber Security Centre (NCSC-SE)¹⁴

The authoring agencies urge any organizations using ZCS to implement the recommendations listed within the Mitigations section of this advisory to reduce the risk associated with this activity. This CSA also includes specific remediations for organizations to implement if they discover the presence of the listed Indicators of compromise (IOCs).  

As more organizations update their ZCS software based on this CSA, LAUNDRY BEAR may discontinue the current campaign exploiting this vulnerability; however, based on the success of this and previous campaigns, it is very likely that the group will continue to target ZCS and other email systems used by organizations in Western countries. The actors will almost certainly continue to rely on email to engage potential victims by exploiting novel vulnerabilities and, when necessary, use social engineering techniques to assist with their efforts. The authoring agencies recommend organizations regularly update their mail service software and continuously monitor their email systems and emails for malicious activity.

For a downloadable list of IOCs, see:

• AA26-204A.stix.xml (STIX XML)
• AA26-204A.stix.json (STIX JSON)

Cybersecurity industry tracking

The cybersecurity industry provides overlapping cyber threat intelligence, indicators of compromise (IOCs), and mitigation recommendations related to these Russian state-supported cyber actors. While not exhaustive, the following are threat group names commonly used for these actors within the cybersecurity community:

• LAUNDRY BEAR
• Void Blizzard [2]
• CL-STA-1114 [3]
• TA488 (formerly UNK_PitStop) [4]

Note: Cybersecurity companies have different methods of tracking and attributing cyber actors, and this may not be a 1:1 correlation to the U.S. government’s understanding for all activity related to these groupings.

Background

Public advisories from Netherlands General Intelligence and Security Service (AIVD), Netherlands Defence Intelligence and Security Service (MIVD), and Microsoft highlighted these Russian state-supported advanced persistent threat (APT) actors in May 2025, calling them LAUNDRY BEAR and Void Blizzard respectively [1] [2]. Both advisories assessed that the group was engaged in malicious cyber activity as early as April 2024.  

The May 2025 advisories highlighted a cluster of activity targeting cloud-based email environments, including Microsoft Exchange in particular, and abusing legitimate APIs to perform data exfiltration in bulk [T1114.002]. The group relied on unsophisticated means of initial access, including procuring stolen credentials on criminal marketplaces [T1078], and using social engineering techniques to lure targets into interacting with a malicious site masquerading as a legitimate one. As of April 2025, one of these sites resembled a European Defence & Security Summit registration portal that required registrants to sign in to their Microsoft account to view. Once a user entered their Microsoft credentials into this malicious site, LAUNDRY BEAR’s modified version of the open source adversary emulation toolkit, Evilginx, intercepted the user’s credentials. LAUNDRY BEAR then used this authentication data, including passwords and session tokens, to access the compromised account and conduct mass email exfiltration, as well as harvest other information. This method of compromise is commonly known as an adversary-in-the-middle (AiTM) technique [T1557].  

Beginning around July 2025, LAUNDRY BEAR shifted toward a more technical method of email compromise, highlighting their continued efforts to covertly acquire email communications from a variety of Western organizations of interest and deliver them to the Russian Federation. Using a custom-developed capability [T1587.001] named “Улей” or “Ulej” (Russian for beehive), LAUNDRY BEAR successfully targeted and exfiltrated sensitive user information from organizations who use the Zimbra Collaboration Suite (ZCS) product [T1114]. Data LAUNDRY BEAR attempted to exfiltrate from compromised accounts included:

• Last 90 days of emails,
• Email address,
• Password [T1589.001],
• Global Address List (GAL) [T1087],
• Two-factor authentication (2FA) tokens, and
• Newly-created Application Passcode [T1098].

The covert and persistent nature of this activity, along with the absence of any known financial extortion, almost certainly indicates this group’s involvement in espionage activities with Russian government backing. Additionally, extensive Ukrainian targeting, prior to use against U.S. and other NATO allies, outlines an increasing trend within Russian cyber threat groups to target Ukrainian users first—both as a priority target and as a testbench for malicious cyber techniques before broader global deployment.

Targeting details

LAUNDRY BEAR has targeted and compromised users in various organizations, including those associated with:

• the Defense Industrial Base (DIB),  
• the federal and local government,
• education,
• energy,
• law enforcement,  
• media,  
• non-governmental organizations, and
• technology.

Technical details

Note: This advisory uses the MITRE ATT&CK® Matrix for Enterprise framework, version 19. This advisory also uses MITRE D3FEND^TM version 1.4.0¹⁵. See Appendix A and Appendix B for tables of the activity mapped to MITRE ATT&CK and D3FEND tactics, techniques, and countermeasures.

Ulej is a novel data exfiltration and aggregation capability, that currently (as of the publication of this report) supports a campaign specifically targeting users of ZCS webmail servers. This capability is used to exploit CVE-2025-66376 [Common Weakness Enumeration (CWE) CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')], but likely could be adapted to exploit other vulnerabilities. It exfiltrates emails and other sensitive user data from a victim’s system immediately after exploitation and stores the data in an actor-controlled unattributable virtual private server (VPS) [T1074.002] running LAUNDRY BEAR’s “Flowerbed” collection framework. The collected data is almost certainly further exfiltrated to internal network resources for review and long-term retention.

Reconnaissance

LAUNDRY BEAR uses the Ulej capability to exploit the CVE-2025-66376 vulnerability in organizations using ZCS. This campaign’s targeted victimology and limited exploitation capabilities likely indicate this group manually identifies and targets the victim organizations. LAUNDRY BEAR likely identifies organizations with public-facing Zimbra infrastructure by port scanning [T1595] and fingerprinting datasets easily procured through various commercial vendors [T1596.005].  

After identifying a target organization, the group likely compiles email addresses for individual users to target with the exploit [T1589.002] from datasets offered by commercial vendors [T1597.002], open source intelligence [T1593], or previously exfiltrated data [T1597].  

Resource development

The actors procure VPSs from a variety of providers [T1583.003], including those with Know Your Customer (KYC) requirements, and often use fabricated identities. LAUNDRY BEAR primarily uses Mullvad VPN [T1583] when interacting with these servers, further demonstrating the group’s intent to mask their identity and maintain operations security (OPSEC). After the server is provisioned, an automated process deploys the Docker containers necessary for Ulej’s Flowerbed framework [T1608], which then receives and aggregates the data Ulej exfiltrates. These servers are typically only used for 7-60 days before moving to new infrastructure.

Flowerbed framework

Flowerbed is a Python project that uses Docker for containerization. The project includes four different Docker containers:

• Catcher,
• Certbot,
• Nginx, and
• Gardener.

Catcher acts as both a DNS and HTTP server to receive and aggregate exfiltrated victim information [T1048]. For additional information on Catcher, refer to the Exfiltration section of this advisory. Flowerbed’s next container, Certbot, is based on one of the official Certbot containers, which allows for automated generation of Let’s Encrypt certificates using DNS challenges through Cloudflare. This certificate can then be used by the Nginx container, which serves as an HTTPS reverse proxy for Catcher, enabling Flowerbed to disguise some of its exfiltration activity through an encrypted communications channel [T1048.002]. The Nginx reverse proxy also validates that the Server Name Indicator (SNI) value contains “*.i.*” prior to forwarding the traffic to Catcher. If the SNI does not contain that string, the Nginx server returns a 444 error to the client. This is likely an attempt to reject non-Ulej connections. Finally, the Gardener container functions as a health check for the Catcher service. Gardener is a simple Python script that validates Catcher correctly receives and processes data.

The simplistic Flowerbed codebase has indications that artificial intelligence (AI) played a role in its development. This highlights how AI is increasingly being used to develop malicious capabilities [T1588.007]. The dependence on AI for a simple capability, such as Flowerbed, alongside a previous reliance on open source capabilities, such as Evilginx2 [T1588.002], likely indicates a lack of advanced technical knowledge within LAUNDRY BEAR, especially in relation to true software development capabilities.

Initial access

To gain initial access, LAUNDRY BEAR sends an email containing a malicious JavaScript payload to the target [T1566]. Through exploitation of CVE-2025-66376, this JavaScript payload is immediately executed once the user views the malicious email [T1203], such as the one shown in Figure 1, in the ZCS webmail platform. Since at least November 2025, LAUNDRY BEAR began sending these phishing emails from victim infrastructure through compromised accounts [T1199], as shown in the email metadata in Figure 2. These compromised accounts were likely previous victims of this, or another LAUNDRY BEAR, campaign and their use is intended to further obfuscate and frustrate anti-phishing tools and training.

According to the National Vulnerability Database (NVD), CVE-2025-66376 was initially published on 5 January 2026. This vulnerability allows for execution of a JavaScript payload included in email content due to improper sanitization of Cascading Style Sheet’s (CSS) @import directives within an email [5]. Because the activity attributed to this campaign began in July 2025—months before Synacor released a patch and the CVE was published—the payload initially exploited a zero-day vulnerability at that time [T1587.004].  

Utilization of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability.

Hidden in LAUNDRY BEAR’s email is a Base64 encoded payload within the “onload” field of a Scalable Vector Graphics (SVG) element [T1027.017], as shown in Figure 3. Leading up to the inclusion of this payload in the SVG element are various instances of @import directives, as required to leverage CVE-2025-66376. This payload includes an XOR encrypted final script encoded in a Base64 inner payload (see Figure 3) [T1027.013]. The outer payload decodes and decrypts the inner payload using an XOR function and a hardcoded key and then executes the script contained within the inner payload containing the collection and exfiltration logic. By changing the key used for the XOR encryption of the inner payload or adding additional @import directives with non-functional code [T1027.010], LAUNDRY BEAR can easily generate new payloads that bypass basic threat detection signatures. This malicious payload attempts to collect and exfiltrate information in 12 asynchronous stages [T1119]. The stages in order of appearance within the payload are as follows:

1. sendStartPing,
2. gather_email,
3. gather_environment,
4. gather_2fa_codes,
5. gather_app_password,
6. gather_device_status,
7. gather_oauth_consumers,
8. gather_autocomplete_password,
9. enable_mail_protocols,
10. gather_gal,
11. sendArchives, and
12. sendFinishPing. 

Use of a zero-day exploit within this campaign demonstrates the ability for even emerging threat groups like LAUNDRY BEAR to operationalize novel exploits into a highly successful capability [T1587].

Persistence and credential access

To establish sustained persistence into the victim’s email account, the script attempts to modify account preferences and collect authentication information. Any collected credentials are later exfiltrated, as further described in the Exfiltration section below. Other campaigns attributed to LAUNDRY BEAR also demonstrated the group’s ability to circumvent multi-factor authentication through session token replay [T1550.004], and the Zimbra campaign follows a similar trend.

The script used in this campaign tries to discover the victim’s email address during the gather_email stage [T1087]. The script searches for this email address in two ways. First, it examines the batchInfoResponse variable, which an HTML script element on the webpage can define, for an email address. Even if the script finds an email address there, it also checks whether it acquired a Cross-Site Request Forgery (CSRF) token as described later in the Collection section of this advisory. If so, the script uses the “GetIdentitiesRequest” Simple Object Access Protocol (SOAP) command under the “ZimbraAccount” namespace to determine the victim’s email address [T1185] and then exfiltrates it. However, if the script does not have a CSRF token or the SOAP request fails, the script exfiltrates the email value recovered from the first method instead. If both attempts fail to capture the victim’s email, the script sends a JavaScript Object Notation (JSON) payload with a key of “email” and value of null over HTTPS and does not attempt DNS exfiltration.

During the gather_autocomplete_password stage, the script attempts to collect the victim’s saved password via the autocomplete feature of the victim’s password manager. The script injects two HTML div elements requesting login credentials onto the page outside of the victim’s view, as shown in Figure 4 and Figure 5. After waiting five seconds, the script then attempts to extract the password provided automatically by the password manager from the input element shown in Figure 4. If there is no value in that input field, it checks the password input field shown in Figure 5. If neither input field contains a value, a JSON payload with a key of “autocomplete_password” and value of null is sent over HTTPS and DNS exfiltration is not attempted.

LAUNDRY BEAR almost certainly relies on a mail client using the Internet Message Access Protocol (IMAP) for persistent access to the victim’s mailbox. During the enable_mail_protocols stage, a SOAP request leveraging the “ModifyPrefsRequest” command under the “ZimbraAccount” namespace is sent. This request attempts to set the “zimbraPrefImapEnabled” preference to TRUE. While the default setting for “zimbraPrefImapEnabled” is not well documented, this action is almost certainly intended to ensure that IMAP access to the victim’s mailbox is enabled.

ZCS does not support 2FA for some mail clients, including IMAP. To support users who rely on IMAP clients, ZCS allows for the generation of Application Passcodes. Application Passcodes are randomly generated passwords that can be used for clients that cannot support the normal 2FA process to authenticate. During the gather_app_password stage, the script makes a SOAP request using the “CreateAppSpecificPasswordRequest” command under the “ZimbraAccount” namespace to create a new Application Passcode [T1556.006]. The SOAP request uses “ZimbraWeb” as the name of the application.

Additionally, the script also attempts to collect 2FA tokens. During the gather_2fa_codes stage, the script makes a SOAP request using the “GetScratchCodesRequest” command under the “ZimbraAccount” namespace. The script then attempts to exfiltrate any non-null 2FA codes collected this way. The number of codes can vary, and each code is exfiltrated to Flowerbed individually.

Collection

As demonstrated in the Persistence and credential access section, this script relies heavily on SOAP requests to collect victim information. To make these requests, the script aims to acquire the victim’s current CSRF token, which it attempts to access within the webpage’s local storage using localStorage.getItem("csrfToken"). If the script is unable to acquire this CSRF token, it will be unable to make any SOAP requests. In addition to the SOAP commands documented in the Persistence and credential access section, other SOAP commands executed to collect victim information are shown in Table 1.

The script attempts to collect the victim’s GAL through brute force by searching for each two-character combination from a character set of “abcdefghijklmnopqrstuvwxyz1234567890.-_”. These queries are conducted using 20 batches of SOAP requests with 77 “SearchGalRequest” SOAP commands in each batch except for the last request containing only 58.

During the gather_environment stage, the script attempts to determine which type of ZCS webmail client the victim is using. The script checks the user’s current URL to determine the client type being used, checking for certain indicators (shown in Table 2) to determine the client type. The corresponding value is then used as the payload when exfiltrating the client type.

As part of collection, the script attempts to harvest any emails not marked as “junk” from the last 90 days from the victim’s account. Emails are collected daily by an HTTP GET request to the URL path, “/home/~/?fmt=tgz&meta=0&query=date:-{DAY_OFFSET}d AND (not in:junk)”. The {DAY_OFFSET} value would be between 0 and 89 representing how many days ago the email was sent or received. To prevent redundant collection and exfiltration of emails, a variable with a name based on the email date being queried, using a format of zd_comp_YYYY-MM-DD, and value of true, is saved to the window.top.localStorage property. This variable is saved regardless of whether the email is successfully exfiltrated.  

According to Mozilla documentation, if the user is not in a private browsing session, any data stored to localStorage does not typically expire. This means that if the user happens to execute the script again from the same computer, the script avoids attempting to re-exfiltrate previously captured emails. However, the script always attempts to pull any emails with a {DAY_OFFSET} of zero. In other words, the script always pulls emails sent or received the same day it is run. After email results are returned from the query for each day of email activity, those results are then passed to Flowerbed as described in the Exfiltration section.

The script also provides LAUNDRY BEAR with telemetry on any errors that occur during the collection process. This is accomplished by executing any collection or exfiltration code through helper functions that contain error handling logic. If an error occurs, a payload containing information on the error itself, the context of the error happening, and the stage in which the error occurred is sent to Flowerbed as described in the Exfiltration section below. For cases where the error occurs within a SOAP request, “:api” is concatenated to the stage value in the payload. If an error occurs during the batch SOAP requests that occur when collecting the GAL of the victim, the stage value will use a format of gather_gal:{VAL}:api. The {VAL} placeholder indicates which batch request, a number from 0 to 19, the error occurred in. Errors that occur during the password autocomplete interception process will use “gather_autocomplete_password:dom” for the stage value. Finally, if an error occurs when attempting to collect or exfiltrate a specific day’s emails, the stage will include which day the error occurred on, using the previously defined placeholder {DAY_OFFSET}, with a format of sendArchive:day-{DAY_OFFSET}.

Exfiltration

At the end of each stage in the collection process, the script attempts to exfiltrate acquired information to Flowerbed. The script primarily relies on two forms of data exfiltration: DNS [T1048.003] and HTTPS. Some information is exfiltrated over both the DNS and HTTPS channels.

Prior to exfiltration, a randomized 10- or 11-character alphanumeric string is generated as an identifier for the victim. This identifier is included in the URL of both the DNS- and HTTPS-based exfiltration.  

DNS exfiltration

DNS exfiltration occurs through DNS A record queries. To ensure data exfiltrated through DNS is not corrupted when traversing through non-actor-controlled DNS infrastructure, Ulej maintains compliance with RFC 1035, Domain Names - Implementation and Specification, specifically accounting for the case insensitivity and subdomain length requirements. Base32 encoding is used to create a case-insensitive payload. Once the payload is encoded, a period (“.”) is added every 60 characters to ensure each subdomain is under 63 characters long. The script then creates a new image object sourced from a URL with the scheme defined in Figure 6. Any traffic involving DNS exfiltration will have “d-“ prefixing the victim identifier, and the subdomain immediately following indicates the type of information being exfiltrated.

When the script generates an image object, the browser tries to retrieve the complete domain of the URL specified as the source of the image. This triggers a DNS request sent to the actor-controlled server and processed by Flowerbed. Table 3 lists both the information exfiltrated via DNS and their corresponding data type identifiers in the DNS queries.  

HTTPS exfiltration

Any information exfiltrated via DNS is also exfiltrated through HTTPS, as well as additional data including email content, contacts, attachments, and error logging information. By using Let’s Encrypt certificates, this group can quickly deploy new infrastructure and leverage encrypted HTTPS communications with valid server certificates when exfiltrating information from the victim’s environment. The HTTPS exfiltration capability only uses two HTTP content types, defined in Table 4. Traffic associated with HTTPS exfiltration will use the URL scheme shown in Figure 7.  

Some of the data transmitted via HTTPS uses the standard JSON content type format. The script includes the information in a POST request to actor-controlled infrastructure.  

Table 5 provides a summary of the JSON-based exfiltration.

The script transmits all HTTPS exfiltration not identified in Table 5 using the Octet-Stream content type as binary data. The POST requests for this method include a filename in the “X-Filename” header. Traditionally, developers use headers prefixed with “X-” to denote custom headers that do not follow a defined standard. The purpose of including this header remains unclear since the Catcher capability ignores the provided filename when saving the data. Table 6 summarizes the data exfiltrated in this format.

The script sends all exfiltrated data identified in Table 6 to the Catcher service exactly as received from the SOAP request in a JSON payload, except for email exfiltration. For email exfiltration, the script sends it as a GZIP compressed archive [T1560]. Although most of the exfiltration consists of valid JSON, the script still attempts to exfiltrate all information identified in Table 6 using the application/octet-stream content typing rather than application/json.

At the beginning and end of the collection and exfiltration activity, during the sendStartPing and sendFinishPing stages respectively, the script submits a POST request with a JSON payload to indicate that the script is starting or finishing execution. Throughout execution, the script also logs error events and send the logs using similar JSON payloads. The script sends the JSON in a POST request to the URL documented in Figure 2, using a URL path of “/v/p” and with a “subtype” key that shows which type of action it logged (start, finish, or error).  

Catcher

Ulej exfiltrates information to Flowerbed to be handled by a service named Catcher. Catcher is a containerized Python application, running in Docker as part of Flowerbed, which is detailed in the Resource development section. It receives exfiltrated data and temporarily stores it, enabling its eventual transfer to infrastructure designed for long-term, secure storage.

Catcher acts as an HTTP server over port 8000 and a DNS server on port 53. As described in the Resource development section, the Flowerbed project uses an additional Docker container running an Nginx reverse proxy to enable HTTPS support. This reverse proxy uses a certificate generated by Let’s Encrypt and forwards all traffic with an SNI containing “*.i.*” to port 8000 within the Catcher container.

The DNS service can accept A, AAAA, MX, TXT, and CAA queries. For any MX, AAAA, or CAA queries, the server will always provide an empty response. The system only supports TXT records as needed to process Automatic Certificate Management Environment (ACME) requests, which enable the assignment of Let’s Encrypt certificates. If the server receives an A query, Catcher will always respond with the public IP address of the Flowerbed server.  

However, if a query includes a domain formatted as shown in Figure 6 and Figure 7, the service saves a log file in JSON format to disk containing the following details of the DNS query:

• Time of query,
• Source IP address for query,
• Queried domain, and
• Type of query.

The HTTP server typically responds with OK, except in cases where the path is “pixel.gif” when the response contains a 1x1 gif image with a SHA-256 hash of ef1955ae757c8b966c83248350331bd3a30f658ced11f387f8ebf05ab3368629. Like the DNS service, the HTTP service will only log entries when the domain found in the host header of the request follows the expected formatting as seen in Figure 6 and Figure 7. As the HTTPS exfiltration uses non-standardized binary and JSON-formatted payloads when exfiltrating to Catcher, Catcher will check the content type of the request. If the content type is set to “application/json”, Catcher encodes the data in Base64 and includes it in the JSON log entry written to disk. If the content type is set to any other value, Catcher leaves the Base64 payload in the JSON log entry blank and saves the payload to a separate file with the same filename as the JSON log entry with a “.bin” file extension. An HTTPS exfiltration event causes Catcher to save a JSON formatted log file to disk containing the following information from the HTTP request:

• Time,
• Source IP address,
• Request method,
• Host,
• Path,
• Query string,
• Headers, and
• Base64 payload.

These JSON event log files and binary output files are then initially saved to the directory /root/hits/tmp and later moved to the /root/hits/ready directory once processed. This prevents incomplete files, which are still being uploaded to Catcher, from premature exfiltration from the server. Approximately every 60 seconds, a likely automated workflow establishes a Secure Shell (SSH) connection with the server hosting Flowerbed for a few seconds, almost certainly exfiltrating the data processed by Catcher to non-public-facing infrastructure. The command in Figure 8 also executes hourly to remove all files last modified at least two days ago from the /root/hits/ready directory.

Response strategies

Mitigations

In many cases, by the time an organization identifies a compromise related to this campaign, numerous sensitive and proprietary emails have already been exfiltrated. The significant risk posed by this cyber threat emphasizes the importance for organizations that use ZCS and other similar webmail solutions to take proactive steps to mitigate this risk.

All organizations that use the ZCS webmail service should immediately prioritize ensuring that their ZCS is not running a vulnerable version. A patch for CVE-2025-66376 was released for both 10.1.13 and 10.0.18 versions of ZCS [D3-AH]. If immediate patching is not feasible, organizations should advise employees to use alternative mail clients to access email and avoid using the Classic ZCS webmail client until ZCS is updated to a non-vulnerable version [d3f:Isolate].

System administrators should closely monitor any Internet-connected ZCS or other email systems and the workstations that access those systems and promptly apply available software updates [D3-AH]. Administrators can maintain awareness of active vulnerability exploitation by referencing open source resources, including CISA’s Known Exploited Vulnerabilities Catalog and NCSC-UK’s Responding to active exploitation of vulnerabilities guidance.

Organizations should consider using a third-party authentication service that supports passkeys for authentication to mediate access to ZCS and other services that do not natively support passkeys. By doing so, organizations can work to eliminate the possibility of automated password collection from autocomplete or password reuse [D3-CH]. However, Application Passcodes may still be necessary and should be monitored closely.  

Organizations should implement network monitoring capabilities with collection and short-term retention of packet capture or NetFlow data and maintain log collection and storage [CPG 3.Q]. This will allow organizations to monitor for and identify suspicious network activity [CPG 4.B], such as:

• Significant amounts of outbound data being sent to IPs associated with VPS providers not used by the organization [D3-NTA];
• Frequent DNS queries for a suspicious domain with seemingly random subdomains [D3-DNSTA];
• A sudden spike of connections to a server associated with a recently established domain [D3-NTCD]; and  
• Connections to internal services, such as webmail, from VPN providers frequently leveraged by this group for nefarious activity, such as Mullvad VPN [D3-NTCD].

Additionally, for organizations that can inspect the content of outbound HTTPS connections via break-and-inspect infrastructure, security teams should identify traffic matching the characteristics described in the Exfiltration section of this advisory.

Indicators of compromise (IOCs)

Flowerbed infrastructure

The following indicators have been attributed to use by LAUNDRY BEAR for their campaign targeting ZCS’s webmail service as of the publication of this advisory. (Disclaimer: Due to the frequency of operational structure changes by this group, these indicators are intended solely for historic attribution purposes. Some indicators, such as IPs, compromised emails, and domains, may be outdated, so organizations should check for current activity before acting on these IOCs.) Table 7 provides details about the server infrastructure used to host Flowerbed, and Table 8 lists the corresponding SHA-1 hash values for the Let’s Encrypt certificates used by that infrastructure [D3-IAA].