iFixit: The Samsung Galaxy Ring Is $400 of 'Disposable Tech'

After a couple of years of regular use, Samsung's $400 Galaxy Ring will end up contributing to the growing e-waste problem. "The Galaxy Ring -- and all smart rings like it -- comes with a huge string attached," writes iFixit in a blog post. "It's 100% disposable, just like the AirPod-style Buds3 that Samsung just released. The culprit? The lithium ion batteries." ZDNet reports: The problem is the battery, and how they have a finite lifespan. Usually that's about 400 recharge cycles, and after that the batteries are finished. And if you can't replace it, then it's the end of the line for the gadget, and it's tossed onto the e-waste pile. [...] iFixit is damning about this sort of tech. "There's nothing wrong with simple but there is something wrong with unrepairable. Just like the Galaxy Buds3, the Galaxy Ring is a disposable tech accessory that isn't designed to last more than two years." And the bottom line is simple: "We can't recommend buying disposable tech like this." Here's what iFixit's Shahram Mokhtari had to say about the Galaxy Ring's battery, after putting it through a CT scanner: On the right hand side of the ring is the faint outline of a lithium polymer battery pouch. There's an inductive coil sitting right on top of the battery (the lines that look like a rectangular track) and another very similar inductive coil that's parallel and slightly separated from the first. That second inductive coil is inside the charging case and works together with the inductive coil in the ring to recharge the battery inside the Galaxy Ring. Inductive charging is the only practical way to deliver power to a device that doesn't have any ports. But there's something else here that sticks out like a sore thumb ... that is a press connector joining the battery to the rest of the board! This is a surprising use of space, why isn't this directly soldered? Nobody is getting back in there to disconnect this thing! We love press connectors, they're easy to work with and make replacing batteries a sight easier than desoldering a half dozen wires. But this one is sealed into the device and serves no purpose in replacement or repair. Our best guess as to why it's in the Galaxy Ring: The battery and wireless charging coil were made in one place, the circuit board somewhere else, and it all comes to a production line somewhere where the two need to be connected together quickly and cheaply. Hence the press connector. It's not for your benefit, it's for the manufacturers.

Read more of this story at Slashdot.