Zero-Day & Vulnerability Intelligence Hub
Echtzeit-Tracking mit EPSS Exploit-Wahrscheinlichkeiten, Angriffsvektor-Decodern und KI-Patch-Anleitungen.
📊 Historien-Charts — Criticals-Trend · Vendors · EPSS-Verteilung
| Tier | CVEs | Anteil | Δ 7 T |
|---|---|---|---|
| ≥90 % | 792 | 0,2 % | +5 |
| ≥50 % | 3.564 | 0,9 % | +2 |
| ≥10 % | 13.173 | 3,2 % | +12 |
| <10 % | 397.353 | 95,8 % | +993 |
⚙️ Erweiterte Forscher-Filter (Lifecycle, Scores, EPSS, Exploit, Sortierung, Dynamik, Quelle, CWE)
🗂️ …
CVE-2026-95827 | The IPv6 neighbour discovery code in subsys/net/ip/ipv6_nbr.c keeps packets that are waiting for address resolution on a per-neighbour pending queue. A queued packet holds two references: the one handed over by the sender and a second one taken by net_ipv6_send_ns() when the packet is put on the queue. The Router Advertisement handler handle_ra_input() popped each packet off the queue and passed it to net_send_data(), relying on a trailing nbr_clear_ns_pendin
The IPv6 neighbour discovery code in subsys/net/ip/ipv6_nbr.c keeps packets that are waiting for address resolution on a per-neighbour pending queue. A queued packet holds two references: the one handed over by the sender and a second one t
CVE-2026-95826 | The SMSC911x/LAN9220 Ethernet driver stages every outgoing frame in a fixed-size static buffer before pushing it to the controller FIFO. eth_tx() in drivers/ethernet/eth_smsc911x.c took the frame length from net_pkt_get_len(pkt) and passed it directly to net_pkt_read(pkt, tx_buf, total_len), with no comparison against the size of tx_buf (NET_ETH_MAX_FRAME_SIZE). net_pkt_read() takes no destination size and only fails when the packet is shorter than the reques
The SMSC911x/LAN9220 Ethernet driver stages every outgoing frame in a fixed-size static buffer before pushing it to the controller FIFO. eth_tx() in drivers/ethernet/eth_smsc911x.c took the frame length from net_pkt_get_len(pkt) and passed
CVE-2026-95825 | net_if_ipv4_addr_rm() and net_if_ipv6_addr_rm() in subsys/net/ip/net_if.c unconditionally called net_if_addr_unref() on the target address. When an earlier removal could not complete because another subsystem still held a reference (the TCP stack takes one on the local address of every connection, in tcp_conn_new() and on connect()), the address is left in place with is_added cleared and is_used still set. A second removal of such an address decremented the r
net_if_ipv4_addr_rm() and net_if_ipv6_addr_rm() in subsys/net/ip/net_if.c unconditionally called net_if_addr_unref() on the target address. When an earlier removal could not complete because another subsystem still held a reference (the TCP
CVE-2026-95824 | The IPv6 Neighbor Discovery code in subsys/net/ip/ipv6_nbr.c flushes a neighbour's queued packets at the end of handle_ra_input(). The Source Link-Layer Address Option (SLLAO) is optional in a Router Advertisement; when it is absent, handle_ra_input() still obtains (or creates) a neighbour cache entry for the RA source via net_ipv6_nbr_add() with a NULL link-layer address, so the entry stays in NET_IPV6_NBR_STATE_INCOMPLETE with nbr->idx == NET_NBR_LLADDR_UNK
The IPv6 Neighbor Discovery code in subsys/net/ip/ipv6_nbr.c flushes a neighbour's queued packets at the end of handle_ra_input(). The Source Link-Layer Address Option (SLLAO) is optional in a Router Advertisement; when it is absent, handle
CVE-2026-87045 | The HTTP/2 server in subsys/net/lib/http/http_server_http2.c clears the connection's stream binding at the start of every frame. handle_http_frame_header() executed client->current_stream = NULL unconditionally, but a CONTINUATION frame does not open a new stream and enter_http_frame_continuation_state() never re-bound one, so the rest of the header block was processed with client->current_stream unset. Two paths then write through the NULL pointer. A request
The HTTP/2 server in subsys/net/lib/http/http_server_http2.c clears the connection's stream binding at the start of every frame. handle_http_frame_header() executed client->current_stream = NULL unconditionally, but a CONTINUATION frame doe
CVE-2026-87044 | The Mbed TLS crypto shim driver in drivers/crypto/crypto_mbedtls_shim.c drives PSA multipart cipher and AEAD operations. In mbedtls_cbc() and mbedtls_aead(), every error path after a successful psa_cipher_encrypt_setup() / psa_aead_decrypt_setup() returned directly without calling psa_cipher_abort() / psa_aead_abort(). Because the abort is the only thing that reaches mbedtls_cipher_free(), each failed operation permanently leaked the heap-allocated mbedtls_ae
The Mbed TLS crypto shim driver in drivers/crypto/crypto_mbedtls_shim.c drives PSA multipart cipher and AEAD operations. In mbedtls_cbc() and mbedtls_aead(), every error path after a successful psa_cipher_encrypt_setup() / psa_aead_decrypt_
CVE-2026-87043 | The entropy-device random number generator in subsys/random/random_entropy_device.c returned early with -ENODEV from rand_get() as soon as device_is_ready() failed, before reaching the non-cryptographic system-timer fallback further down the same function. Because z_impl_sys_rand_get() returns void and discards that error — and the public sys_rand_get() syscall is itself declared void, so it cannot report failure — the caller's output buffer was left untouche
The entropy-device random number generator in subsys/random/random_entropy_device.c returned early with -ENODEV from rand_get() as soon as device_is_ready() failed, before reaching the non-cryptographic system-timer fallback further down th
CVE-2026-87041 | The RTIO submission-queue verifier rtio_vrfy_sqe() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) accumulated the results of K_SYSCALL_MEMORY() into its valid_sqe flag with &=. That macro returns nonzero on failure (it is built on K_SYSCALL_VERIFY_MSG(), which yields !(expr)), so every buffer permission check contributed the opposite of its result. A submission whose tx.buf, rx.buf or txrx.tx_buf/txrx.rx_buf pointer was not accessi
The RTIO submission-queue verifier rtio_vrfy_sqe() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) accumulated the results of K_SYSCALL_MEMORY() into its valid_sqe flag with &=. That macro returns nonzero on failu
CVE-2026-87040 | The nRF link-layer receive paths of the open-source Bluetooth LE Controller did not validate the on-air LENGTH field of a received PDU against the maximum receive length that was used to program the radio. isr_rx_pdu() in subsys/bluetooth/controller/ll_sw/nordic/lll/lll_conn.c enqueued any non-empty data PDU after only the sequence-number and (for encrypted links) MIC checks, and the corresponding isr_rx() handlers in lll_central_iso.c, lll_peripheral_iso.c,
The nRF link-layer receive paths of the open-source Bluetooth LE Controller did not validate the on-air LENGTH field of a received PDU against the maximum receive length that was used to program the radio. isr_rx_pdu() in subsys/bluetooth/c
CVE-2026-87039 | The user-mode syscall verifier z_vrfy_i2s_configure() in drivers/i2s/i2s_handlers.c copies the caller's struct i2s_config in from user memory and then, when cfg->frame_clk_freq is 0 (the API's "unconfigure the stream" request), jumps straight to z_impl_i2s_configure() without performing the K_SYSCALL_OBJ(config.mem_slab, K_OBJ_MEM_SLAB) ownership/type check or the block_size sanity check. The mem_slab field is a struct k_mem_slab *, so on that path a complete
The user-mode syscall verifier z_vrfy_i2s_configure() in drivers/i2s/i2s_handlers.c copies the caller's struct i2s_config in from user memory and then, when cfg->frame_clk_freq is 0 (the API's "unconfigure the stream" request), jumps straig
CVE-2026-87038 | The user-mode verification handler for the i3c_transfer() system call, z_vrfy_i3c_transfer() in drivers/i3c/i3c_handlers.c, validated the caller-supplied struct i3c_device_desc in place instead of snapshotting it. It confirmed only that the descriptor was readable by the calling thread (K_SYSCALL_MEMORY_READ()), read target->bus once to check it with K_SYSCALL_OBJ(), and then passed the caller's live pointer down. The implementation z_impl_i3c_transfer() re-r
The user-mode verification handler for the i3c_transfer() system call, z_vrfy_i3c_transfer() in drivers/i3c/i3c_handlers.c, validated the caller-supplied struct i3c_device_desc in place instead of snapshotting it. It confirmed only that the
CVE-2026-16511 | Two RTIO syscall verifiers, in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0), did not validate user-supplied pointers before the kernel wrote through them. z_vrfy_rtio_sqe_cancel() performed no validation at all. It passed the caller's struct rtio_sqe pointer straight to z_impl_rtio_sqe_cancel(), which converts it with CONTAINER_OF to a struct rtio_iodev_sqe, ORs RTIO_SQE_CANCELED (BIT(3)) into its 16-bit flags field in supervisor m
Two RTIO syscall verifiers, in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0), did not validate user-supplied pointers before the kernel wrote through them. z_vrfy_rtio_sqe_cancel() performed no validation at all.
CVE-2026-85036 | The Bluetooth Classic AVDTP layer defers releasing a session's stream endpoints: bt_avdtp_l2cap_disconnected() in subsys/bluetooth/host/classic/avdtp.c ends with k_work_submit(&session->_release_work), placing the embedded struct k_work on the system work queue's pending list. When the same struct bt_avdtp object is immediately reused for a new signalling connection, the session memory is re-initialized — a2dp_get_connection() in subsys/bluetooth/host/classic
The Bluetooth Classic AVDTP layer defers releasing a session's stream endpoints: bt_avdtp_l2cap_disconnected() in subsys/bluetooth/host/classic/avdtp.c ends with k_work_submit(&session->_release_work), placing the embedded struct k_work on
CVE-2026-85035 | The can_add_rx_filter_msgq() system call installs a CAN RX filter whose callback (can_msgq_put() in drivers/can/can_common.c) is handed the caller's struct k_msgq * as user_data. The controller driver stores that raw pointer in its filter table and dereferences it from the RX path every time a matching frame arrives. The system call verifier z_vrfy_can_add_rx_filter_msgq() in drivers/can/can_handlers.c validated the queue only with K_SYSCALL_OBJ(), which is a
The can_add_rx_filter_msgq() system call installs a CAN RX filter whose callback (can_msgq_put() in drivers/can/can_common.c) is handed the caller's struct k_msgq * as user_data. The controller driver stores that raw pointer in its filter t
CVE-2026-85034 | The Bluetooth host's GATT client passed the value of a received Handle Value Notification, Handle Value Indication or Multiple Handle Value Notification to bt_gatt_subscribe_params::notify callbacks using only the length derived from the received ATT PDU. bt_att_recv() in subsys/bluetooth/host/att.c validates only a minimum PDU length and does not enforce the negotiated ATT MTU, and the fixed ATT L2CAP channel in subsys/bluetooth/host/l2cap.c applies no rx.mt
The Bluetooth host's GATT client passed the value of a received Handle Value Notification, Handle Value Indication or Multiple Handle Value Notification to bt_gatt_subscribe_params::notify callbacks using only the length derived from the re
CVE-2026-85033 | The AVRCP Target role in subsys/bluetooth/host/classic/avrcp.c keeps its vendor-dependent response transmit state in a per-connection object selected by connection index (get_avrcp_tg()), with the per-transfer context (tid, sent_len, and the BT_AVRCP_TG_FLAG_TX_ONGOING flag) stored in the user_data of the queued response net_buf. The AVCTP teardown handler avrcp_disconnected() did not cancel tg->vd_rsp_tx_work and did not release the buffers still queued on t
The AVRCP Target role in subsys/bluetooth/host/classic/avrcp.c keeps its vendor-dependent response transmit state in a per-connection object selected by connection index (get_avrcp_tg()), with the per-transfer context (tid, sent_len, and th
CVE-2026-85032 | The MCTP over USB device class in subsys/pmci/mctp/mctp_usb.c splits RX handling across two threads: the system workqueue runs mctp_usb_class_out_work(), which parses host OUT data byte by byte and fills a packet buffer at usb->rx_pkt, while the USB device stack thread runs mctp_usb_class_disable(). The disable handler used k_work_cancel(), which removes a queued work item but returns immediately without waiting for a handler that is already running, and then
The MCTP over USB device class in subsys/pmci/mctp/mctp_usb.c splits RX handling across two threads: the system workqueue runs mctp_usb_class_out_work(), which parses host OUT data byte by byte and fills a packet buffer at usb->rx_pkt, whil
CVE-2026-82962 | ethernet_fill_header() in subsys/net/l2/ethernet/ethernet.c can prepend the Ethernet header in place, by pushing it into the headroom of the packet's first fragment, instead of allocating a separate header fragment. Before this fix the in-place path was selected purely from the build-time value of CONFIG_NET_L2_ETHERNET_RESERVE_HEADER, with no check that the packet actually has that headroom, and then called net_buf_push(pkt->buffer, hdr_len). Only Ethernet T
ethernet_fill_header() in subsys/net/l2/ethernet/ethernet.c can prepend the Ethernet header in place, by pushing it into the headroom of the packet's first fragment, instead of allocating a separate header fragment. Before this fix the in-p
CVE-2026-82961 | The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. z_vrfy_gpio_pin_configure(), z_vrfy_gpio_pin_get_config() and z_vrfy_gpio_pin_interrupt_configure() verified only the device object (K_SYSCALL_DRIVER_GPIO() / K_SYSCALL_OBJ()) and then passed the caller-supplied gpio_pin_t straight through to z_impl_gpio_pin_*() and on to the driver. The only pin check in include/zephyr/drivers/gpio.h wa
The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. z_vrfy_gpio_pin_configure(), z_vrfy_gpio_pin_get_config() and z_vrfy_gpio_pin_interrupt_configure() verified only th
CVE-2026-82390 | The Espressif AES driver drivers/crypto/crypto_esp32_aes.c advertises a multi-session cipher API — it hands out up to CONFIG_ESP32_CRYPTO_AES_SESSIONS_MAX (default 4) independent sessions, each carrying its own key and direction. The AES peripheral, however, has a single chip-global set of key and mode registers, and aes_begin_session() programmed them exactly once, at session start, outside the aes_lock mutex that serialises the transforms. The per-operation
The Espressif AES driver drivers/crypto/crypto_esp32_aes.c advertises a multi-session cipher API — it hands out up to CONFIG_ESP32_CRYPTO_AES_SESSIONS_MAX (default 4) independent sessions, each carrying its own key and direction. The AES pe
CVE-2026-82389 | In the Bluetooth Classic Hands-Free Profile Audio Gateway role, hfp_ag_create() in subsys/bluetooth/host/classic/hfp_ag.c starts an SDP discovery toward the peer, which links the embedded ag->sdp_param._node into the SDP client's pending request list in subsys/bluetooth/host/classic/sdp.c. If the subsequent bt_rfcomm_dlc_connect() call fails, bt_hfp_ag_connect() cleaned up by memset()-ing the entire AG object while that node was still linked, and while ag->sl
In the Bluetooth Classic Hands-Free Profile Audio Gateway role, hfp_ag_create() in subsys/bluetooth/host/classic/hfp_ag.c starts an SDP discovery toward the peer, which links the embedded ag->sdp_param._node into the SDP client's pending re
CVE-2026-82388 | bt_hfp_hf_connect() in subsys/bluetooth/host/classic/hfp_hf.c allocates the per-connection HFP Hands-Free object with hfp_hf_create(), which starts an SDP discovery by passing the object's embedded hf->sdp_param to bt_sdp_discover(). That call links the caller-owned parameter block into the SDP client's request list (session->reqs in subsys/bluetooth/host/classic/sdp.c). If the subsequent bt_rfcomm_dlc_connect() then failed, the affected code wiped the entire
bt_hfp_hf_connect() in subsys/bluetooth/host/classic/hfp_hf.c allocates the per-connection HFP Hands-Free object with hfp_hf_create(), which starts an SDP discovery by passing the object's embedded hf->sdp_param to bt_sdp_discover(). That c
CVE-2026-19742 | The IPv6 stack derived the long-lived secret key used to compute RFC 7217 stable interface identifiers (gen_stable_iid() in subsys/net/ip/ipv6.c) and RFC 8981 temporary interface identifiers (gen_temporary_iid() in subsys/net/ip/ipv6_pe.c) with sys_rand_get(). That API is documented as not cryptographically secure, while both RFCs require this key to be an unpredictable random value of at least 128 bits — the unpredictability of every generated IID rests enti
The IPv6 stack derived the long-lived secret key used to compute RFC 7217 stable interface identifiers (gen_stable_iid() in subsys/net/ip/ipv6.c) and RFC 8981 temporary interface identifiers (gen_temporary_iid() in subsys/net/ip/ipv6_pe.c)
CVE-2026-81038 | The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t
The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the
CVE-2026-81039 | The Bluetooth host pre-allocates a bt_conn object (a "reservation") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_start_add_conn() in subsys/bluetooth/host/adv.c. When an incoming peripheral connection completes, find_pending_connect() in subsys/bluetooth/host/hci_core.c looked that reservation up using only the identity and the peer address, with a directed-then-undirected fallback, and had no knowledge of which a
The Bluetooth host pre-allocates a bt_conn object (a "reservation") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_start_add_conn() in subsys/bluetooth/host/adv.c. When an incoming peripheral conn
CVE-2026-79982 | The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocated that buffer from bt_hci_ep_pool, a fixed pool whose slots are only USBD_MAX_BULK_MPS bytes (64 on full-speed-only builds), and then performed net_buf_add_mem(buf, bt_buf->data, bt_buf->len) with no length check. HCI event
The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocate
CVE-2026-79981 | The DNS stub resolver in subsys/net/lib/dns/resolve.c binds one UDP socket per configured server when the resolver context is initialised (dns_resolve_init_locked() -> register_dispatcher() -> dns_dispatcher_register()), with the local port left at 0 so the stack picks an ephemeral port exactly once. dns_write() then sends every subsequent query from that same socket without re-binding, so the source port is constant for the lifetime of the resolver context w
The DNS stub resolver in subsys/net/lib/dns/resolve.c binds one UDP socket per configured server when the resolver context is initialised (dns_resolve_init_locked() -> register_dispatcher() -> dns_dispatcher_register()), with the local port
CVE-2026-79980 | The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared
The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_intern
CVE-2026-79979 | The arm64 MMU backend invalidates a single virtual address from the TLB with invalidate_tlb_page() in arch/arm64/core/mmu.c, which issued TLBI VAE1{IS} with an operand of virt >> 12. That operand encodes the ASID in bits [63:48], so the invalidation only ever matched ASID 0 (the kernel page tables) and global entries. Memory domains, however, are allocated ASIDs starting at 1 in arch_mem_domain_init(), and every domain-private leaf created by private_map() is
The arm64 MMU backend invalidates a single virtual address from the TLB with invalidate_tlb_page() in arch/arm64/core/mmu.c, which issued TLBI VAE1{IS} with an operand of virt >> 12. That operand encodes the ASID in bits [63:48], so the inv
CVE-2026-79978 | The RTIO streaming completion callback adxl345_process_fifo_samples_cb() in drivers/sensor/adi/adxl345/adxl345_stream.c clamps the amount of FIFO data it will report (read_len = MIN(fifo_bytes, buf_avail)) to the space actually returned by rtio_sqe_rx_buf(), but then queues one 6-byte bus read per hardware FIFO entry at consecutive offsets from read_buf, bounded by the device-reported entry count rather than by the clamp. When the allocated buffer is smaller
The RTIO streaming completion callback adxl345_process_fifo_samples_cb() in drivers/sensor/adi/adxl345/adxl345_stream.c clamps the amount of FIFO data it will report (read_len = MIN(fifo_bytes, buf_avail)) to the space actually returned by
CVE-2026-79977 | The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_data(), when the 32-bit receiver index of an incoming transport-data message matched no session, the code both scheduled a new handshake and copied the datagram's source address into peer->endpoint with memcpy(&peer->endpoint, peer_addr, sizeof(peer->endpoint)). Because the receiver index is unknown, there is no ke
The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_data(), when the 32-bit receiver index of an incoming transport-data message matched no sessi
CVE-2026-19741 | Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built wi
Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the exam