NASA Investigates Laser-Beam Welding in a Vacuum for In-Space Manufacturing

NASA hopes to stimulate in-space manufacturing through a multi-year "laser beam welding collaboration" with Ohio State University. The project "seeks to understand the physical processes of welding on the lunar surface," according to NASA.gov, "such as investigating the effects of laser beam welding in a combined vacuum and reduced gravity environment."

The goal is to increase the capabilities of manufacturing in space to potentially assemble large structures or make repairs on the Moon, which will inform humanity's next giant leap of sending astronauts to Mars and beyond. "For a long time, we've used fasteners, rivets, or other mechanical means to keep structures that we assemble together in space," said Andrew O'Connor, a Marshall materials scientist who is helping coordinate the collaborative effort and is NASA's technical lead for the project. "But we're starting to realize that if we really want strong joints and if we want structures to stay together when assembled on the lunar surface, we may need in-space welding."


The ability to weld structures in space would also eliminate the need to transport rivets and other materials, reducing payloads for space travel. That means learning how welds will perform in space. To turn the effort into reality, researchers are gathering data on welding under simulated space conditions, such as temperature and heat transfer in a vacuum; the size and shape of the molten area under a laser beam; how the weld cross-section looks after it solidifies; and how mechanical properties change for welds performed in environmental conditions mimicking the lunar surface. "Once you leave Earth, it becomes more difficult to test how the weld performs, so we are leveraging both experiments and computer modeling to predict welding in space while we're still on the ground," said O'Connor.

In August 2024, a joint team from Ohio State's Welding Engineering and Multidisciplinary Capstone Programs and Marshall's Materials & Processes Laboratory performed high-powered fiber laser beam welding aboard a commercial aircraft that simulated reduced gravity. The aircraft performed parabolic flight maneuvers that began in level flight, pulled up to add 8,000 feet in altitude, and pushed over at the top of a parabolic arc, resulting in approximately 20 seconds of reduced gravity to the passengers and experiments. While floating in this weightless environment, team members performed laser welding experiments in a simulated environment similar to that of both low Earth orbit and lunar gravity. Analysis of data collected by a network of sensors during the tests will help researchers understand the effects of space environments on the welding process and welded material.

They performed that laser-beam welding in a vacuum chamber during the parabolic flight (on a Boeing 727), according to the article — and successfully completed 69 out of 70 welds in microgravity and lunar gravity conditions. "The last time NASA performed welding in space was during the Skylab mission in 1973...

"Practical welding and joining methods and allied processes, including additive manufacturing, will be required to develop the in-space economy."

Read more of this story at Slashdot.