Recap
This is a continuation of Part 2 of KVM in Rust series,
where we successfully set up a memory region for our guest VM. Now we will see
how to proceed further and run a very simple binary in our hypervisor.
Loading the binary
Now, we have only set up a memory region, but we still haven't loaded any binary
or code to actually run. For this, I have written a small "Hello world" x86
assembly file:
https://github.com/StjepanPoljak/kvm-rust/blob/kvm-part3-code/samples/hello-world.asm
Notice that the org 0x1000 header is quite arbitrary and it's actually a good
lead of what we also need to do (set the instruction pointer). Let's compile the
assembly file with:
nasm ./samples/hello-world.asm
Then, we want to load our binary into the memory region at address 0x1000:
let mut file = File::open("./samples/hello-world")?;
let mut code = Vec::new();
file.read_to_end(&mut code)?;
unsafe {
std::ptr::copy_nonoverlapping(code.as_ptr(),
(mem_ptr as *mut u8).add(0x1000),
code.len()) };
Here we are using the more optimal copy_nonoverlapping because we can be quite
certain that the memory where code is stored is not overlapping with our
memory region.
Creating a vCPU
As we saw in Part 1, we have also discovered that QEMU also
calls KVM_SET_VCPU to obtain a vCPU file descriptor on which it will call
KVM_RUN. So, all that we have to do to set up a vCPU is to take a look at the
ioctl and recreate it in Rust:
// 140904 ioctl(9<anon_inode:kvm-vm>, 0xae41 /* KVM_CREATE_VCPU */, 0) = 10<anon_inode:kvm-vcpu:0>
let vcpu_fd = unsafe { libc::ioctl(self.fd, KVM_CREATE_VCPU, 0usize) };
if vcpu_fd < 0 {
return Err(io::Error::last_os_error());
}
Investigating vCPU operations
It would be tempting to simply call KVM_RUN on this file descriptor, however,
we don't really know how vCPU is set up, where the instruction pointer is and
even if the registers are in the valid state. If we look at the ioctl calls
referring to kvm-vcpu:0 in our log (and filtering out the spamming KVM_RUN
and KVM_SMI), we can see a lot of lines like these being repeated:
$ grep 'kvm-vcpu:0' kvm.log | grep -v 'RUN\|SMI'
### omitted a lot of repetitive strace output ###
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0xc080aebe /* KVM_GET_NESTED_STATE */, 0x7768f8002010) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0xc028ae92 /* KVM_TPR_ACCESS_REPORTING */, 0x77690198f090) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4140aecd /* KVM_SET_SREGS2 */, 0x77690198f2f0) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4090ae82 /* KVM_SET_REGS */, {rax=0x20, ..., rsp=0x6d88, rbp=0, ..., rip=0x18, rflags=0x246}) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x5000aea5 /* KVM_SET_XSAVE */, 0x7768f8001000) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4188aea7 /* KVM_SET_XCRS */, 0x77690198f2c0) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4008ae89 /* KVM_SET_MSRS */, 0x7768f80040a0) = 59
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4040aea0 /* KVM_SET_VCPU_EVENTS */, 0x77690198f500) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4008ae89 /* KVM_SET_MSRS */, 0x7768f80040a0) = 1
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4080aea2 /* KVM_SET_DEBUGREGS */, 0x77690198f500) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0xc008ae88 /* KVM_GET_MSRS */, 0x77690198f5a0) = 1
So we see that QEMU is setting vCPU registers via KVM_SET_REGS and in this log
we can see their exact values. It's also calling KVM_SET_SREGS2 which is
setting system registers; unfortunately, we cannot see the values used here.
Also, we do not need to follow the whole logic here, we just want to see what
QEMU is doing with registers before calling KVM_RUN:
$ awk '/KVM_RUN/ {print; exit} {print}' kvm.log | grep '[GS]ET_[S]\?REGS\|KVM_RUN'
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4140aecd /* KVM_SET_SREGS2 */, 0x77690198f310) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4090ae82 /* KVM_SET_REGS */, {rax=0, ..., rsp=0, rbp=0, ..., rip=0xfff0, rflags=0x2}) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x8090ae81 /* KVM_GET_REGS */, {rax=0, ..., rsp=0, rbp=0, ..., rip=0xfff0, rflags=0x2}) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x8140aecc /* KVM_GET_SREGS2 */, 0x77690198f310) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4140aecd /* KVM_SET_SREGS2 */, 0x77690198f310) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4090ae82 /* KVM_SET_REGS */, {rax=0, ..., rsp=0, rbp=0, ..., rip=0xfff0, rflags=0x2}) = 0
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0xae80 /* KVM_RUN */, 0) = -1 EINTR (Interrupted system call)
Since QEMU first calls SET_SREGS2 and SET_REGS we should actually
investigate what the default (if any) values are in our own implementation.
Implementing register get/set operations in Rust
The procedure for this is as with all other KVM ioctl calls we implemented.
We find out how to construct their numbers (consult the previous article here)
and reimplement these constants in Rust:
const KVM_GET_SREGS2 : u64 = _IOR::<kvm_sregs2>(KVMIO, 0xcc);
const KVM_SET_SREGS2 : u64 = _IOW::<kvm_sregs2>(KVMIO, 0xcd);
const KVM_GET_REGS : u64 = _IOR::<kvm_regs>(KVMIO, 0x81);
const KVM_SET_REGS : u64 = _IOW::<kvm_regs>(KVMIO, 0x82);
We also need to add kvm_sregs2 and kvm_regs in our build.rs file:
bindgen::Builder::default()
.header("/usr/include/linux/kvm.h")
.allowlist_type("kvm_sregs2")
.allowlist_type("kvm_userspace_memory_region")
.allowlist_type("kvm_regs")
.generate_comments(false)
.generate()?
.write_to_file(out_path.join("kvm-bindings.rs"))?;
Then, ioctl calls are as follows (I will only give example for get_sregs2
and get_regs):
let mut sregs2 = unsafe { std::mem::zeroed() };
let ret = unsafe { libc::ioctl(self.fd, KVM_GET_SREGS2, &mut sregs2) };
let mut regs = unsafe { std::mem::zeroed() };
let ret = unsafe { libc::ioctl(self.fd, KVM_GET_REGS, &mut regs) };
Peeking at registers
After obtaining sregs2 and regs we can print them out and see what they are
set to by default (to accomplish this we consult the struct definition in our
kvm-bindings.rs (or in the Linux headers) and print out all the values of the
fields we find). For regs we see they are pre-set to:
RAX=0x0 RBX=0x0 RCX=0x0 RDX=0x600
RSI=0x0 RDI=0x0 RSP=0x0 RBP=0x0
R8=0x0 R9=0x0 R10=0x0 R11=0x0
R12=0x0 R13=0x0 R14=0x0 R15=0x0
RIP=0xfff0 RFLAGS=0x2
Taking a look at our trace from kvm.log we can see that the ones QEMU sets are
exactly the same (except for RDX but we can get away with this one).
Peeking at system registers
Now, for sregs2 it gets a bit more complicated. Our defaults are as follows:
CS base=0xffff0000 selector=0xf000 limit=0xffff type=0xb present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
DS base=0x0 selector=0x0 limit=0xffff type=0x3 present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
ES base=0x0 selector=0x0 limit=0xffff type=0x3 present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
FS base=0x0 selector=0x0 limit=0xffff type=0x3 present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
GS base=0x0 selector=0x0 limit=0xffff type=0x3 present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
SS base=0x0 selector=0x0 limit=0xffff type=0x3 present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
TR base=0x0 selector=0x0 limit=0xffff type=0xb present=0x1
dpl=0x0 db=0x0 s=0x0 l=0x0 g=0x0 avl=0x0
LDT base=0x0 selector=0x0 limit=0xffff type=0x2 present=0x1
dpl=0x0 db=0x0 s=0x0 l=0x0 g=0x0 avl=0x0
GDT base=0x0 limit=0xffff
IDT base=0x0 limit=0xffff
CR0=0x60000010 CR2=0x0 CR3=0x0 CR4=0x0 CR8=0x0
EFER=0x0 APIC_BASE=0xfee00900 FLAGS=0x0
PDPTRS[0]=0x0 PDPTRS[1]=0x0 PDPTRS[2]=0x0 PDPTRS[3]=0x0
Problem is that we don't see any values in our strace log, only the address of
the variable. So we need to be a bit creative here if we want to find out what
QEMU sets these values to. We could use ptrace (in fact strace is built upon
ptrace API), but it may be a bit too much. Same for uprobes and eBPF. We
do have GDB, though, and it's just perfect as a one-off thing here. All we have
to do is run QEMU under GDB and then execute:
(gdb) break ioctl if $rsi == 0x4140aecd
(gdb) run
Note that 0x4140aecd is the exact value that we extracted from SET_SREGS2
ioctl call (in x86 ABI, RSI is holding the value of second argument):
140904 ioctl(10<anon_inode:kvm-vcpu:0>, 0x4140aecd /* KVM_SET_SREGS2 */, 0x77690198f310) = 0
Once GDB breaks, we can dump memory. However, we don't know the exact size of
struct kvm_sregs2; we could guess or manually inspect, but quickest way to get
it is to actually have a small C program:
#include <linux/kvm.h>
#include <stdlib.h>
#include <stdio.h>
int main() {
printf("%lu", sizeof(struct kvm_sregs2));
return 0;
}
The program will return value of 320 (at least on my system) and we can then
use this in GDB:
(gdb) dump memory dump.bin $rdx $rdx+320
Note that RDX is holding the third argument, i.e. the address we actually saw
in our strace log. Now, we can reuse our function for printing sregs2 in
Rust. We simply hack our main function to load the file and reinterpret its data
as sregs2 and then print it. We got:
CS base=0xffff0000 selector=0xf000 limit=0xffff type=0xb present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
DS base=0x0 selector=0x0 limit=0xffff type=0x3 present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
ES base=0x0 selector=0x0 limit=0xffff type=0x3 present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
FS base=0x0 selector=0x0 limit=0xffff type=0x3 present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
GS base=0x0 selector=0x0 limit=0xffff type=0x3 present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
SS base=0x0 selector=0x0 limit=0xffff type=0x3 present=0x1
dpl=0x0 db=0x0 s=0x1 l=0x0 g=0x0 avl=0x0
TR base=0x0 selector=0x0 limit=0xffff type=0xb present=0x1
dpl=0x0 db=0x0 s=0x0 l=0x0 g=0x0 avl=0x0
LDT base=0x0 selector=0x0 limit=0xffff type=0x2 present=0x1
dpl=0x0 db=0x0 s=0x0 l=0x0 g=0x0 avl=0x0
GDT base=0x0 limit=0xffff
IDT base=0x0 limit=0xffff
CR0=0x60000010 CR2=0x0 CR3=0x0 CR4=0x0 CR8=0x0
EFER=0x0 APIC_BASE=0xfee00900 FLAGS=0x0
PDPTRS[0]=0x0 PDPTRS[1]=0x4b275f5fce32f200 PDPTRS[2]=0x0 PDPTRS[3]=0x3
We can see that this more or less corresponds to the defaults we observed in our
KVM implementation. If we want to change our registers (which we will), then we
will always first get the ones that are current in the vCPU, change the ones we
need and then set them using KVM_SET_REGS (or KVM_SET_SREGS2). So one of
first things to do is to set CS to flat mapping:
let mut sregs2 = vcpu.get_sregs2()?;
sregs2.cs.base = 0;
sregs2.cs.selector = 0;
vcpu.set_sregs2(sregs2)?;
Recall that our assembly file was assembled with org 0x1000, so setting RIP to
0x1000 causes execution to begin at the start of the loaded binary:
let mut regs = vcpu.get_regs()?;
regs.rip = 0x1000;
vcpu.set_regs(regs)?;
Furthermore, we now have a very good process of finding out what QEMU does with
registers.
Running the binary
Now this is where strace stopped being useful and my understanding of the KVM
run loop became more useful. Another positive thing is that this part of QEMU
source code is quite readable and can be found in function kvm_vcpu_thread_fn.
The more x86-specific code with exit reasons can be found in the kvm_arch_handle_exit function.
Setting kvm_run shared memory region
To wrap things up, first we need to mmap the shared kvm_run structure that KVM
uses to communicate VM-exit information and other runtime state between the
kernel and userspace:
// 140904 ioctl(3</dev/kvm<char 10:232>>, 0xae04 /* KVM_GET_VCPU_MMAP_SIZE */, 0) = 12288
let kvm_run_size = unsafe {
libc::ioctl(kvm_fd, KVM_GET_VCPU_MMAP_SIZE, 0usize) };
let kvm_run_mem = unsafe {
libc::mmap(ptr::null_mut(), kvm_run_size as usize,
libc::PROT_READ|libc::PROT_WRITE, libc::MAP_SHARED,
vcpu_fd, 0) };
Then, when we call KVM_RUN we simply match the exit reasons and act
accordingly:
let run = vcpu.kvm_run_mem as *mut kvm_run;
loop {
let ret = unsafe { libc::ioctl(vcpu.fd, KVM_RUN, 0usize) };
if ret < 0 {
return Err(io::Error::last_os_error());
}
let exit_reason = unsafe { (*run).exit_reason };
match exit_reason {
KVM_EXIT_MMIO => { /* omitted */ }
KVM_EXIT_HLT => {
println!("Guest halted.");
break; }
KVM_EXIT_SHUTDOWN => {
println!("Guest shutdown.");
break; }
KVM_EXIT_INTERNAL_ERROR => {
return Err(io::Error::other("KVM internal error.")); }
_ => {
println!("EXIT REASON = {}", exit_reason);
}
}
}
Our first output
Being that our assembly file uses VGA MMIO to output the "Hello world!" string,
I have only implemented KVM_EXIT_MMIO. Then we can finally see the output:
$ cargo run ./samples/hello-world
## ommitted sregs2 output and warnings ##
RAX=0x0 RBX=0x0 RCX=0x0 RDX=0x600
RSI=0x0 RDI=0x0 RSP=0x0 RBP=0x0
R8=0x0 R9=0x0 R10=0x0 R11=0x0
R12=0x0 R13=0x0 R14=0x0 R15=0x0
RIP=0x1000 RFLAGS=0x2
Hello from KVM!
Guest halted.
RAX=0xb800 RBX=0x0 RCX=0x0 RDX=0x600
RSI=0x102d RDI=0x22 RSP=0x0 RBP=0x0
R8=0x0 R9=0x0 R10=0x0 R11=0x0
R12=0x0 R13=0x0 R14=0x0 R15=0x0
RIP=0x101b RFLAGS=0x46
Conclusion
This concludes the three-part series on figuring out KVM via strace and
reimplementing it in Rust. A lot of next steps actually come down to x86
architecture and bootloader specifics, so we may leave it here for now. The full
code capable of running simple binaries can be found on GitHub:
https://github.com/StjepanPoljak/kvm-rust/tree/kvm-part3-code
SOCIAL SHARE CARD GENERATOR